- 19 3月, 2014 3 次提交
-
-
由 Stefani Seibold 提交于
There a currently more than 30 users of the gtod macro, so replace the last VVAR(vsyscall_gtod_data) by gtod macro. Reviewed-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NStefani Seibold <stefani@seibold.net> Link: http://lkml.kernel.org/r/1395094933-14252-6-git-send-email-stefani@seibold.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Stefani Seibold 提交于
This patch is a small code cleanup for the __vdso_clock_gettime() function. It removes the unneeded return values from do_monotonic_coarse() and do_realtime_coarse() and add a fallback label for doing the kernel gettimeofday() system call. Reviewed-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NStefani Seibold <stefani@seibold.net> Link: http://lkml.kernel.org/r/1395094933-14252-5-git-send-email-stefani@seibold.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Stefani Seibold 提交于
This intermediate patch revamps the vclock_gettime.c by moving some functions around. It is only for spliting purpose, to make whole the 32 bit vdso timer patch easier to review. Reviewed-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NStefani Seibold <stefani@seibold.net> Link: http://lkml.kernel.org/r/1395094933-14252-4-git-send-email-stefani@seibold.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 12 1月, 2014 1 次提交
-
-
由 John Stultz 提交于
Linus disliked the _no_lockdep() naming, so instead use the more-consistent raw_* prefix to the non-lockdep enabled seqcount methods. This also adds raw_ methods for the write operations as well, which will be utilized in a following patch. Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Reviewed-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Krzysztof Hałasa <khalasa@piap.pl> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Willy Tarreau <w@1wt.eu> Link: http://lkml.kernel.org/r/1388704274-5278-1-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 06 11月, 2013 1 次提交
-
-
由 John Stultz 提交于
Currently seqlocks and seqcounts don't support lockdep. After running across a seqcount related deadlock in the timekeeping code, I used a less-refined and more focused variant of this patch to narrow down the cause of the issue. This is a first-pass attempt to properly enable lockdep functionality on seqlocks and seqcounts. Since seqcounts are used in the vdso gettimeofday code, I've provided non-lockdep accessors for those needs. I've also handled one case where there were nested seqlock writers and there may be more edge cases. Comments and feedback would be appreciated! Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-3-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 7月, 2013 1 次提交
-
-
由 Marcelo Tosatti 提交于
Linux as a guest on KVM hypervisor, the only user of the pvclock vsyscall interface, does not require notification on task migration because: 1. cpu ID number maps 1:1 to per-CPU pvclock time info. 2. per-CPU pvclock time info is updated if the underlying CPU changes. 3. that version is increased whenever underlying CPU changes. Which is sufficient to guarantee nanoseconds counter is calculated properly. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
- 15 2月, 2013 1 次提交
-
-
由 Satoru Takeuchi 提交于
vread_hpet() uses "0xf0" as the offset of the hpet counter. To clarify the meaning of this code, it should use symbolic name, HPET_COUNTER, instead. Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 11月, 2012 1 次提交
-
-
由 Marcelo Tosatti 提交于
Improve performance of time system calls when using Linux pvclock, by reading time info from fixmap visible copy of pvclock data. Originally from Jeremy Fitzhardinge. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 25 9月, 2012 1 次提交
-
-
由 John Stultz 提交于
Switch x86_64 to using sub-ns precise vsyscall Cc: Tony Luck <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
- 24 3月, 2012 2 次提交
-
-
由 Andy Lutomirski 提交于
This is about a 3% speedup on Sandy Bridge. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Andy Lutomirski 提交于
We used to store the wall-to-monotonic offset and the realtime base. It's faster to precompute the monotonic base. This is about a 3% speedup on Sandy Bridge for CLOCK_MONOTONIC. It's much more impressive for CLOCK_MONOTONIC_COARSE. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
- 16 3月, 2012 2 次提交
-
-
由 Thomas Gleixner 提交于
The update of the vdso data happens under xtime_lock, so adding a nested lock is pointless. Just use a seqcount to sync the readers. Reviewed-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 John Stultz 提交于
When switching from a vsyscall capable to a non-vsyscall capable clocksource, there was a small race, where the last vsyscall gettimeofday before the switch might return a invalid time value using the new non-vsyscall enabled clocksource values after the switch is complete. This is due to the vsyscall code checking the vclock_mode once outside of the seqcount protected section. After it reads the vclock mode, it doesn't re-check that the sampled clock data that is obtained in the seqcount critical section still matches. The fix is to sample vclock_mode inside the protected section, and as long as it isn't VCLOCK_NONE, return the calculated value. If it has changed and is now VCLOCK_NONE, fall back to the syscall gettime calculation. v2: * Cleanup checks as suggested by tglx * Also fix same issue present in gettimeofday path CC: Andy Lutomirski <luto@amacapital.net> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
- 19 7月, 2011 1 次提交
-
-
由 Borislav Petkov 提交于
Now that 1b3f2a72 is in, it is very important that the below lying comment be removed! :-) Signed-off-by: NBorislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20110718191054.GA18359@liondog.tnicAcked-by: NAndy Lutomirski <luto@mit.edu> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 15 7月, 2011 1 次提交
-
-
由 Andy Lutomirski 提交于
The vsyscall page now consists entirely of trap instructions. Cc: John Stultz <johnstul@us.ibm.com> Signed-off-by: NAndy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/637648f303f2ef93af93bae25186e9a1bea093f5.1310639973.git.luto@mit.eduSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 06 6月, 2011 1 次提交
-
-
由 Andy Lutomirski 提交于
It's unnecessary overhead in code that's supposed to be highly optimized. Removing it allows us to remove one of the two syscall instructions in the vsyscall page. The only sensible use for it is for UML users, and it doesn't fully address inconsistent vsyscall results on UML. The real fix for UML is to stop using vsyscalls entirely. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Jan Beulich <JBeulich@novell.com> Cc: richard -rw- weinberger <richard.weinberger@gmail.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Cc: Andi Kleen <andi@firstfloor.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Louis Rilling <Louis.Rilling@kerlabs.com> Cc: Valdis.Kletnieks@vt.edu Cc: pageexec@freemail.hu Link: http://lkml.kernel.org/r/973ae803fe76f712da4b2740e66dccf452d3b1e4.1307292171.git.luto@mit.eduSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 5月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Reported-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@mit.edu>
-
- 24 5月, 2011 4 次提交
-
-
由 Andy Lutomirski 提交于
This function just reads a 64-bit variable that's updated atomically, so we don't need any locks. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Borislav Petkov <bp@amd64.org> Link: http://lkml.kernel.org/r/%3C40e2700f8cda4d511e5910be1e633025d28b36c2.1306156808.git.luto%40mit.edu%3ESigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andy Lutomirski 提交于
The only fast implementation of time(2) we expose is through the vsyscall page and we want to get userspace to stop using the vsyscall page. So make it available through the vDSO as well. This is essentially a cut-n-paste job. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Borislav Petkov <bp@amd64.org> Link: http://lkml.kernel.org/r/%3Cbf963bac5207de4b29613f27c42705e4371812a8.1306156808.git.luto%40mit.edu%3ESigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andy Lutomirski 提交于
vclock_gettime's do_monotonic helper can't ever generate a negative nsec value, so it doesn't need to check whether it's negative. In the CLOCK_MONOTONIC_COARSE case, ns can't ever exceed 2e9-1, so we can avoid the loop entirely. This saves a single easily-predicted branch. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Borislav Petkov <bp@amd64.org> Link: http://lkml.kernel.org/r/%3Cd6d528d32c7a21618057cfc9005942a0fe5cb54a.1306156808.git.luto%40mit.edu%3ESigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andy Lutomirski 提交于
Variables that are shared between the vdso and the kernel are currently a bit of a mess. They are each defined with their own magic, they are accessed differently in the kernel, the vsyscall page, and the vdso, and one of them (vsyscall_clock) doesn't even really exist. This changes them all to use a common mechanism. All of them are delcared in vvar.h with a fixed address (validated by the linker script). In the kernel (as before), they look like ordinary read-write variables. In the vsyscall page and the vdso, they are accessed through a new macro VVAR, which gives read-only access. The vdso is now loaded verbatim into memory without any fixups. As a side bonus, access from the vdso is faster because a level of indirection is removed. While we're at it, pack jiffies and vgetcpu_mode into the same cacheline. Signed-off-by: NAndy Lutomirski <luto@mit.edu> Cc: Andi Kleen <andi@firstfloor.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Borislav Petkov <bp@amd64.org> Link: http://lkml.kernel.org/r/%3C7357882fbb51fa30491636a7b6528747301b7ee9.1306156808.git.luto%40mit.edu%3ESigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 22 8月, 2009 1 次提交
-
-
由 john stultz 提交于
After talking with some application writers who want very fast, but not fine-grained timestamps, I decided to try to implement new clock_ids to clock_gettime(): CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE which returns the time at the last tick. This is very fast as we don't have to access any hardware (which can be very painful if you're using something like the acpi_pm clocksource), and we can even use the vdso clock_gettime() method to avoid the syscall. The only trade off is you only get low-res tick grained time resolution. This isn't a new idea, I know Ingo has a patch in the -rt tree that made the vsyscall gettimeofday() return coarse grained time when the vsyscall64 sysctrl was set to 2. However this affects all applications on a system. With this method, applications can choose the proper speed/granularity trade-off for themselves. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: nikolag@ca.ibm.com Cc: Darren Hart <dvhltc@us.ibm.com> Cc: arjan@infradead.org Cc: jonathan@jonmasters.org LKML-Reference: <1250734414.6897.5.camel@localhost.localdomain> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 4月, 2009 1 次提交
-
-
由 John Wright 提交于
According to the gettimeofday(2) manual: If either tv or tz is NULL, the corresponding structure is not set or returned. Since it is legal to give NULL as the tv argument, the code should make sure tv is not NULL before trying to dereference it. This issue manifests itself on x86_64 when vdso=0 is not on the kernel command-line and libc uses the vDSO for gettimeofday() (e.g. glibc >= 2.7). A simple reproducer: #include <stdio.h> #include <sys/time.h> int main(void) { struct timezone tz; gettimeofday(NULL, &tz); return 0; } See http://bugs.debian.org/466491 for more details. [ Impact: fix gettimeofday(NULL, &tz) segfault ] Signed-off-by: NJohn Wright <john.wright@hp.com> Cc: Andi Kleen <ak@suse.de> Cc: John Wright <john.wright@hp.com> LKML-Reference: <1241037121-14805-1-git-send-email-john.wright@hp.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 11月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: name change of unlikely tracer and profiler Ingo Molnar suggested changing the config from UNLIKELY_PROFILE to BRANCH_PROFILING. I never did like the "unlikely" name so I went one step farther, and renamed all the unlikely configurations to a "BRANCH" variant. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 11月, 2008 1 次提交
-
-
由 Ingo Molnar 提交于
Impact: fix bootup crash the branch tracer missed arch/x86/vdso/vclock_gettime.c from disabling tracing, which caused such bootup crashes: [ 201.840097] init[1]: segfault at 7fffed3fe7c0 ip 00007fffed3fea2e sp 000077 also clean up the ugly ifdefs in arch/x86/kernel/vsyscall_64.c by creating DISABLE_UNLIKELY_PROFILE facility for code to turn off instrumentation on a per file basis. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 5月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Add the notrace annotations to the vsyscall functions - there we are not in kernel context yet, so the tracer function cannot (and must not) be called. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 23 5月, 2008 1 次提交
-
-
由 Andi Kleen 提交于
Jeremy's gcc 3.4 seems to be unable to inline a 8 byte memcpy. But the vdso doesn't support external references. Copy the structure members of struct timezone explicitely instead. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 1月, 2008 1 次提交
-
-
由 Lucas Woods 提交于
Signed-off-by: NLucas Woods <woodzy@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 9月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
vdso vgetns() didn't mask the time source offset calculation, which could lead to time problems with 32bit HPET. Add the masking. Thanks to Chuck Ebbert for tracking this down. Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
This implements new vDSO for x86-64. The concept is similar to the existing vDSOs on i386 and PPC. x86-64 has had static vsyscalls before, but these are not flexible enough anymore. A vDSO is a ELF shared library supplied by the kernel that is mapped into user address space. The vDSO mapping is randomized for each process for security reasons. Doing this was needed for clock_gettime, because clock_gettime always needs a syscall fallback and having one at a fixed address would have made buffer overflow exploits too easy to write. The vdso can be disabled with vdso=0 It currently includes a new gettimeofday implemention and optimized clock_gettime(). The gettimeofday implementation is slightly faster than the one in the old vsyscall. clock_gettime is significantly faster than the syscall for CLOCK_MONOTONIC and CLOCK_REALTIME. The new calls are generally faster than the old vsyscall. Advantages over the old x86-64 vsyscalls: - Extensible - Randomized - Cleaner - Easier to virtualize (the old static address range previously causes overhead e.g. for Xen because it has to create special page tables for it) Weak points: - glibc support still to be written The VM interface is partly based on Ingo Molnar's i386 version. Includes compile fix from Joachim Deguara Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-