Recently we've had a number of reports where log recovery on a v5
filesystem has reported corruptions that looked to be caused by
recovery being re-run over the top of an already-recovered
metadata. This has uncovered a bug in recovery (fixed elsewhere)
but the vector that caused this was largely unknown.

A kdump test started tripping over this problem - the system
would be crashed, the kdump kernel and environment would boot and
dump the kernel core image, and then the system would reboot. After
reboot, the root filesystem was triggering log recovery and
corruptions were being detected. The metadumps indicated the above
log recovery issue.

What is happening is that the kdump kernel and environment is
mounting the root device read-only to find the binaries needed to do
it's work. The result of this is that it is running log recovery.
However, because there were unlinked files and EFIs to be processed
by recovery, the completion of phase 1 of log recovery could not
mark the log clean. And because it's a read-only mount, the unmount
process does not write records to the log to mark it clean, either.
Hence on the next mount of the filesystem, log recovery was run
again across all the metadata that had already been recovered and
this is what triggered corruption warnings.

To avoid this problem, we need to ensure that a read-only mount
always updates the log when it completes the second phase of
recovery. We already handle this sort of issue with rw->ro remount
transitions, so the solution is as simple as quiescing the
filesystem at the appropriate time during the mount process. This
results in the log being marked clean so the mount behaviour
recorded in the logs on repeated RO mounts will change (i.e. log
recovery will no longer be run on every mount until a RW mount is
done). This is a user visible change in behaviour, but it is
harmless.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Originally-From: Dave Chinner <dchinner@redhat.com>

The rmap btree is allocated from the AGFL, which means we have to
ensure ENOSPC is reported to userspace before we run out of free
space in each AG. The last allocation in an AG can cause a full
height rmap btree split, and that means we have to reserve at least
this many blocks *in each AG* to be placed on the AGFL at ENOSPC.
Update the various space calculation functions to handle this.

Also, because the macros are now executing conditional code and are
called quite frequently, convert them to functions that initialise
variables in the struct xfs_mount, use the new variables everywhere
and document the calculations better.

[darrick.wong@oracle.com: don't reserve blocks if !rmap]
[dchinner@redhat.com: update m_ag_max_usable after growfs]
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Originally-From: Dave Chinner <dchinner@redhat.com>

Now we have all the surrounding call infrastructure in place, we can
start filling out the rmap btree implementation. Start with the
on-disk btree format; add everything needed to read, write and
manipulate rmap btree blocks. This prepares the way for adding the
btree operations implementation.

[darrick: record owner and offset info in rmap btree]
[darrick: fork, bmbt and unwritten state in rmap btree]
[darrick: flags are a separate field in xfs_rmap_irec]
[darrick: calculate maxlevels separately]
[darrick: move the 'unwritten' bit into unused parts of rm_offset]
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Originally-From: Dave Chinner <dchinner@redhat.com>

XFS reserves a small amount of space in each AG for the minimum
number of free blocks needed for operation. Adding the rmap btree
increases the number of reserved blocks, but it also increases the
complexity of the calculation as the free inode btree is optional
(like the rmbt).

Rather than calculate the prealloc blocks every time we need to
check it, add a function to calculate it at mount time and store it
in the struct xfs_mount, and convert the XFS_PREALLOC_BLOCKS macro
just to use the xfs-mount variable directly.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Restructure everything that used xfs_bmap_free to use xfs_defer_ops
instead.  For now we'll just remove the old symbols and play some
cpp magic to make it work; in the next patch we'll actually rename
everything.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The upcoming buftarg I/O accounting mechanism maintains a count of
all buffers that have undergone I/O in the current hold-release
cycle.  Certain buffers associated with core infrastructure (e.g.,
the xfs_mount superblock buffer, log buffers) are never released,
however. This means that accounting I/O submission on such buffers
elevates the buftarg count indefinitely and could lead to lockup on
unmount.

Define a new buffer flag to explicitly exclude buffers from buftarg
I/O accounting. Set the flag on the superblock and associated log
buffers.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

If we take "retry forever" literally on metadata IO errors, we can
hang at unmount, once it retries those writes forever. This is the
default behavior, unfortunately.

Add an error configuration option for this behavior and default it
to "fail" so that an unmount will trigger actuall errors, a shutdown
and allow the unmount to succeed. It will be noisy, though, as it
will log the errors and shutdown that occurs.

To fix this, we need to mark the filesystem as being in the process
of unmounting. Do this with a mount flag that is added at the
appropriate time (i.e. before the blocking AIL sync). We also need
to add this flag if mount fails after the initial phase of log
recovery has been run.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

We need to be able to change the way XFS behaviours in error
conditions depending on the type of underlying storage. This is
necessary for handling non-traditional block devices with extended
error cases, such as thin provisioned devices that can return ENOSPC
as an IO error.

Introduce the basic sysfs infrastructure needed to define and
configure error behaviours. This is done to be generic enough to
extend to configuring behaviour in other error conditions, such as
ENOMEM, which also has different desired behaviours according to
machine configuration.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Use krealloc to implement our realloc function.  This helps to avoid
new allocations if we are still in the slab bucket.  At least for the
bmap btree root that's actually the common case.

This also allows removing the now unused oldsize argument.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

inode32/inode64 allocator behavior with respect to mount, remount
and growfs is a little tricky.

The inode32 mount option should only enable the inode32 allocator
heuristics if the filesystem is large enough for 64-bit inodes to
exist.  Today, it has this behavior on the initial mount, but a
remount with inode32 unconditionally changes the allocation
heuristics, even for a small fs.

Also, an inode32 mounted small filesystem should transition to the
inode32 allocator if the filesystem is subsequently grown to a
sufficient size.  Today that does not happen.

This patch consolidates xfs_set_inode32 and xfs_set_inode64 into a
single new function, and moves the "is the maximum inode number big
enough to matter" test into that function, so it doesn't rely on the
caller to get it right - which remount did not do, previously.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Move the di_mode value from the xfs_icdinode to the VFS inode, reducing
the xfs_icdinode byte another 2 bytes and collapsing another 2 byte hole
in the structure.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Don't leak the UUID table when the module is unloaded.
(Found with kmemleak.)
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

This patch implements per-filesystem stats objects in sysfs. It
depends on the application of the previous patch series that
develops the infrastructure to support both xfs global stats and
xfs per-fs stats in sysfs.

Stats objects are instantiated when an xfs filesystem is mounted
and deleted on unmount. With this patch, the stats directory is
created and populated with the familiar stats and stats_clear files.
Example:
        /sys/fs/xfs/sda9/stats/stats
        /sys/fs/xfs/sda9/stats/stats_clear

With this patch, the individual counts within the new per-fs
stats file(s) remain at zero. Functions that use the the macros
to increment, decrement, and add-to the per-fs stats counts will
be covered in a separate new patch to follow this one. Note that
the counts within the global stats file (/sys/fs/xfs/stats/stats)
advance normally and can be cleared as it was prior to this patch.

[dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so
it is down before/after any path that uses the per-mount stats. ]
Signed-off-by: NBill O'Donnell <billodo@redhat.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The root inode is read as part of the xfs_mountfs() sequence and the
reference is dropped in the event of failure after we grab the
inode.  The reference drop doesn't necessarily free the inode,
however. It marks it for reclaim and potentially kicks off the
reclaim workqueue.  The workqueue is destroyed further up the error
path, which means we are subject to crash if the workqueue job runs
after this point or a memory leak which is identified if the
xfs_inode_zone is destroyed (e.g., on module removal). Both of these
outcomes are reproducible via manual instrumentation of a mount
error after the root inode xfs_iget() call in xfs_mountfs().

Update the xfs_mountfs() error path to cancel any potential reclaim
work items and to run a synchronous inode reclaim if the root inode
is marked for reclaim. This ensures that no jobs remain on the queue
before it is destroyed and that the root inode is freed before the
reclaim mechanism is torn down.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Log recovery occurs in two phases at mount time. In the first phase,
EFIs and EFDs are processed and potentially cancelled out. EFIs without
EFD objects are inserted into the AIL for processing and recovery in the
second phase. xfs_mountfs() runs various other operations between the
phases and is thus subject to failure. If failure occurs after the first
phase but before the second, pending EFIs sit on the AIL, pin it and
cause the mount to hang.

Update the mount sequence to ensure that pending EFIs are cancelled in
the event of failure. Add a recovery cancellation mechanism to iterate
the AIL and cancel all EFI items when requested. Plumb cancellation
support through the log mount finish helper and update xfs_mountfs() to
invoke cancellation in the event of failure after recovery has started.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The sparse inode chunks feature uses the helper function to enable the
allocation of sparse inode chunks. The incompatible feature bit is set
on disk at mkfs time to prevent mount from unsupported kernels.

Also, enforce the inode alignment requirements required for sparse inode
chunks at mount time. When enabled, full inode chunks (and all inode
record) alignment is increased from cluster size to inode chunk size.
Sparse inode alignment must match the cluster size of the fs. Both
superblock alignment fields are set as such by mkfs when sparse inode
support is enabled.

Finally, warn that sparse inode chunks is an experimental feature until
further notice.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Because the counters use a custom batch size, the comparison
functions need to be aware of that batch size otherwise the
comparison does not work correctly. This leads to ASSERT failures
on generic/027 like this:

 XFS: Assertion failed: 0, file: fs/xfs/xfs_mount.c, line: 1099
 ------------[ cut here ]------------
....
 Call Trace:
  [<ffffffff81522a39>] xfs_mod_icount+0x99/0xc0
  [<ffffffff815285cb>] xfs_trans_unreserve_and_mod_sb+0x28b/0x5b0
  [<ffffffff8152f941>] xfs_log_commit_cil+0x321/0x580
  [<ffffffff81528e17>] xfs_trans_commit+0xb7/0x260
  [<ffffffff81503d4d>] xfs_bmap_finish+0xcd/0x1b0
  [<ffffffff8151da41>] xfs_inactive_ifree+0x1e1/0x250
  [<ffffffff8151dbe0>] xfs_inactive+0x130/0x200
  [<ffffffff81523a21>] xfs_fs_evict_inode+0x91/0xf0
  [<ffffffff811f3958>] evict+0xb8/0x190
  [<ffffffff811f433b>] iput+0x18b/0x1f0
  [<ffffffff811e8853>] do_unlinkat+0x1f3/0x320
  [<ffffffff811d548a>] ? filp_close+0x5a/0x80
  [<ffffffff811e999b>] SyS_unlinkat+0x1b/0x40
  [<ffffffff81e0892e>] system_call_fastpath+0x12/0x71

This is a regression introduced by commit 501ab323 ("xfs: use generic
percpu counters for inode counter").

This patch fixes the same problem for both the inode counter and the
free block counter in the superblocks.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Now that there are no users of the bitfield based incore superblock
modification API, just remove the whole damn lot of it, including
all the bitfield definitions. This finally removes a lot of cruft
that has been around for a long time.

Credit goes to Christoph Hellwig for providing a great patch
connecting all the dots to enale us to do this. This patch is
derived from that work.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Introduce helper functions for modifying fields in the superblock
into xfs_trans.c, the only caller of xfs_mod_incore_sb_batch().  We
can then use these directly in xfs_trans_unreserve_and_mod_sb() and
so remove another user of the xfs_mode_incore_sb() API without
losing any functionality or scalability of the transaction commit
code..

Based on a patch from Christoph Hellwig.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Add a new helper to modify the incore counter of free realtime
extents. This matches the helpers used for inode and data block
counters, and removes a significant users of the xfs_mod_incore_sb()
interface.

Based on a patch originally from Christoph Hellwig.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Now that the in-core superblock infrastructure has been replaced with
generic per-cpu counters, we don't need it anymore. Nuke it from
orbit so we are sure that it won't haunt us again...
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

XFS has hand-rolled per-cpu counters for the superblock since before
there was any generic implementation. The free block counter is
special in that it is used for ENOSPC detection outside transaction
contexts for for delayed allocation. This means that the counter
needs to be accurate at zero. The current per-cpu counter code jumps
through lots of hoops to ensure we never run past zero, but we don't
need to make all those jumps with the generic counter
implementation.

The generic counter implementation allows us to pass a "batch"
threshold at which the addition/subtraction to the counter value
will be folded back into global value under lock. We can use this
feature to reduce the batch size as we approach 0 in a very similar
manner to the existing counters and their rebalance algorithm. If we
use a batch size of 1 as we approach 0, then every addition and
subtraction will be done against the global value and hence allow
accurate detection of zero threshold crossing.

Hence we can replace the handrolled, accurate-at-zero counters with
generic percpu counters.

Note: this removes just enough of the icsb infrastructure to compile
without warnings. The rest will go in subsequent commits.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

XFS has hand-rolled per-cpu counters for the superblock since before
there was any generic implementation. The free inode counter is not
used for any limit enforcement - the per-AG free inode counters are
used during allocation to determine if there are inode available for
allocation.

Hence we don't need any of the complexity of the hand-rolled
counters and we can simply replace them with generic per-cpu
counters similar to the inode counter.

This version introduces a xfs_mod_ifree() helper function from
Christoph Hellwig.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

XFS has hand-rolled per-cpu counters for the superblock since before
there was any generic implementation. There are some warts around
the  use of them for the inode counter as the hand rolled counter is
designed to be accurate at zero, but has no specific accurracy at
any other value. This design causes problems for the maximum inode
count threshold enforcement, as there is no trigger that balances
the counters as they get close tothe maximum threshold.

Instead of designing new triggers for balancing, just replace the
handrolled per-cpu counter with a generic counter.  This enables us
to update the counter through the normal superblock modification
funtions, but rather than do that we add a xfs_mod_icount() helper
function (from Christoph Hellwig) and keep the percpu counter
outside the superblock in the struct xfs_mount.

This means we still need to initialise the per-cpu counter
specifically when we read the superblock, and vice versa when we
log/write it, but it does mean that we don't need to change any
other code.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

We currently have to ensure that every time we update sb_features2
that we update sb_bad_features2. Now that we log and format the
superblock in it's entirety we actually don't have to care because
we can simply update the sb_bad_features2 when we format it into the
buffer. This removes the need for anything but the mount and
superblock formatting code to care about sb_bad_features2, and
hence removes the possibility that we forget to update bad_features2
when necessary in the future.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

We now have several superblock loggin functions that are identical
except for the transaction reservation and whether it shoul dbe a
synchronous transaction or not. Consolidate these all into a single
function, a single reserveration and a sync flag and call it
xfs_sync_sb().

Also, xfs_mod_sb() is not really a modification function - it's the
operation of logging the superblock buffer. hence change the name of
it to reflect this.

Note that we have to change the mp->m_update_flags that are passed
around at mount time to a boolean simply to indicate a superblock
update is needed.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

When we log changes to the superblock, we first have to write them
to the on-disk buffer, and then log that. Right now we have a
complex bitfield based arrangement to only write the modified field
to the buffer before we log it.

This used to be necessary as a performance optimisation because we
logged the superblock buffer in every extent or inode allocation or
freeing, and so performance was extremely important. We haven't done
this for years, however, ever since the lazy superblock counters
pulled the superblock logging out of the transaction commit
fast path.

Hence we have a bunch of complexity that is not necessary that makes
writing the in-core superblock to disk much more complex than it
needs to be. We only need to log the superblock now during
management operations (e.g. during mount, unmount or quota control
operations) so it is not a performance critical path anymore.

As such, remove the complex field based logging mechanism and
replace it with a simple conversion function similar to what we use
for all other on-disk structures.

This means we always log the entirity of the superblock, but again
because we rarely modify the superblock this is not an issue for log
bandwidth or CPU time. Indeed, if we do log the superblock
frequently, delayed logging will minimise the impact of this
overhead.

[Fixed gquota/pquota inode sharing regression noticed by bfoster.]
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Currently when we modify sb_features2, we store the same value also in
sb_bad_features2. However in most places we forget to mark field
sb_bad_features2 for logging and thus it can happen that a change to it
is lost. This results in an inconsistent sb_features2 and
sb_bad_features2 fields e.g. after xfstests test xfs/187.

Fix the problem by changing XFS_SB_FEATURES2 to actually mean both
sb_features2 and sb_bad_features2 fields since this is always what we
want to log. This isn't ideal because the fact that XFS_SB_FEATURES2
means two fields could cause some problem in future however the code is
hopefully less error prone that it is now.
Signed-off-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

These are currently considered private to libxfs, but they are
widely used by the userspace code to decode, walk and check
directory structures. Hence they really form part of the external
API and as such need to bemoved to xfs_dir2.h.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

More on-disk format consolidation.  A few declarations that weren't on-disk
format related move into better suitable spots.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

More consolidatation for the on-disk format defintions.  Note that the
XFS_IS_REALTIME_INODE moves to xfs_linux.h instead as it is not related
to the on disk format, but depends on a CONFIG_ option.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The expectation since the introduction the lazy superblock counters is
that the counters are synced and superblock logged appropriately as part
of the filesystem freeze sequence. This does not occur, however, due to
the logic in xfs_fs_writable() that prevents progress when the fs is in
any state other than SB_UNFROZEN.

While this is a bug, it has not been exposed to date because the last
thing XFS does during freeze is dirty the log. The log recovery process
recalculates the counters from AGI/AGF metadata to ensure everything is
correct. Therefore should a crash occur while an fs is frozen, the
subsequent log recovery puts everything back in order. See the following
commit for reference:

	92821e2b [XFS] Lazy Superblock Counters

We might not always want to rely on dirtying the log on a frozen fs.
Modify xfs_log_sbcount() to proceed when the filesystem is freezing but
not once the freeze process has completed. Modify xfs_fs_writable() to
accept the minimum freeze level for which modifications should be
blocked to support various codepaths.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

xfs_buf_read_uncached() has two failure modes. If can either return
NULL or bp->b_error != 0 depending on the type of failure, and not
all callers check for both. Fix it so that xfs_buf_read_uncached()
always returns the error status, and the buffer is returned as a
function parameter. The buffer will only be returned on success.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

As it is accessed through the struct xfs_mount and can be set up
entirely from fs/xfs/xfs_super.c
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDave Chinner <david@fromorbit.com>

Removes unneeded semicolon, introduced by commit a70a4fa5 ("xfs: fix
a couple error sequence jumps in xfs_mountfs"):

fs/xfs/xfs_mount.c:858:24-25: Unneeded semicolon

Generated by: scripts/coccinelle/misc/semicolon.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

The commit

83e782e1 xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD

added a new function xfs_sb_quota_from_disk() which swaps
on-disk XFS_OQUOTA_* flags for in-core XFS_GQUOTA_* and XFS_PQUOTA_*
flags after the superblock is read.

However, if log recovery is required, the superblock is read again,
and the modified in-core flags are re-read from disk, so we have
XFS_OQUOTA_* flags in memory again.  This causes the
XFS_QM_NEED_QUOTACHECK() test to be true, because the XFS_OQUOTA_CHKD
is still set, and not XFS_GQUOTA_CHKD or XFS_PQUOTA_CHKD.

Change xfs_sb_from_disk to call xfs_sb_quota_from disk and always
convert the disk flags to in-memory flags.

Add a lower-level function which can be called with "false" to
not convert the flags, so that the sb verifier can verify
exactly what was on disk, per Brian Foster's suggestion.
Reported-by: NCyril B. <cbay@excellency.fr>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>

Trying to support tiny disks only and saving a bit memory might have
made sense on an SGI O2 15 years ago, but is pretty pointless today.

Remove the rarely tested codepath that uses various smaller in-memory
types to reduce our test matrix and make the codebase a little bit
smaller and less complicated.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBen Myers <bpm@sgi.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>