The VIDIOC_QUERYCTRL command needs to actually do a queryctrl, not a
querymenu.  Similarly, the VIDIOC_QUERYMENU command needs to actually
do a querymenu not a queryctrl.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following patch adds support for a new version of the
Terratec Cinergy DT USB XS Diversity Dual DVB-T TV tuner stick.
The USB ID of the new stick is 0ccd:0081.
The hardware of the stick has changed, when compared to the first version of
this stick, but it still uses quite standard components, so that only minor
changes are needed to the sources.

The patch has been successfully tested with hotplugging the device and then
2 x tzap and 2 x mplayer, to watch two different TV programs simultaneously.

The stick works with both, the old and new firmwares:
- dvb-usb-dib0700-1.10.fw and
- dvb-usb-dib0700-1.20.fw
Signed-off-by: NNicolas Fournier <nicolasfournier@yahoo.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote:
> hI
>
> With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel

> [   14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded
> [   14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared
> [   14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
> [   14.555374] cx88[0]/2: cx2388x based DVB/ATSC card
> [   14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000
> [   14.555560] IP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4
> [   14.555652] *pde = 00000000
> [   14.555735] Oops: 0002 [#1] SMP
> [   14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys
> [   14.557013]
> [   14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1)
> [   14.557013] EIP: 0060:[<c02e6bff>] EFLAGS: 00010246 CPU: 1
> [   14.557013] EIP is at __mutex_lock_common+0x3c/0xe4
> [   14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000
> [   14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88
> [   14.557013]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> [   14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000)
> [   14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110
> [   14.557013]        de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8
> [   14.557013]        e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000
> [   14.557013] Call Trace:
> [   14.557013]  [<c02e6d38>] ? __mutex_lock_slowpath+0x17/0x1a
> [   14.557013]  [<c02e6b88>] ? mutex_lock+0x12/0x14
> [   14.557013]  [<c02e6b88>] ? mutex_lock+0x12/0x14
> [   14.557013]  [<e1ac7115>] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb]
> [   14.557013]  [<e1aeca62>] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb]
> [   14.557013]  [<e09ee41e>] ? cx8802_register_driver+0xbd/0x1ac [cx8802]
> [   14.557013]  [<e09ee467>] ? cx8802_register_driver+0x106/0x1ac [cx8802]
> [   14.557013]  [<e1aee37f>] ? dvb_init+0x22/0x27 [cx88_dvb]
> [   14.557013]  [<c0101132>] ? _stext+0x42/0x11a
> [   14.557013]  [<e1aee35d>] ? dvb_init+0x0/0x27 [cx88_dvb]
> [   14.557013]  [<c013d2ca>] ? __blocking_notifier_call_chain+0xe/0x51
> [   14.557013]  [<c014970b>] ? sys_init_module+0x8c/0x17d
> [   14.557013]  [<c0103b42>] ? syscall_call+0x7/0xb
> [   14.557013]  [<c013007b>] ? round_jiffies_relative+0x14/0x16
> [   14.557013]  =======================
> [   14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0
> [   14.557013] EIP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88
> [   14.565211] ---[ end trace 94d8b014e067ac7b ]---

Tested and confirmed to work by several users at linux-media@vger.kernel.org
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some em28xx devices use the PCM IN AC 97 PIN for digital audio. However,
currently, the PCM IN selection is not set by the driver. This patch allows
specifying the PCM IN expected output, via board description table.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The zoran driver does a module_get/put of THIS_MODULE on device open/close.
This isn't necessary as the kernel does this automatically.

Clean up the failure path of zoran_open() somewhat.

Make the dprintk()s on open/close a higher debug level and make the user
count printed take the current open/close into account.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The driver should only use the kernel mapped io address, zr36057_mem, and
not the PCI bus address, zr36057_adr.  Since the latter is only printed out
once, there is no need to save it in the driver data structure.

There was some old code that looked like it was for the Alpha architecture
which would use the PCI bus address.  It probably no longer applies to
modern kernels.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of using custom code, just let the device layer look it up for us
from the pci device table.  This requires extending the pci device table to
list each known card, plus a catch-all entry for the cards that don't have
sub-system vendor/device data.

Improve some of the info and error messages too.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The driver was keeping a global array with an entry for each zoran device
probed.  It was a leftover from when the driver didn't dynamically allocate
the driver data for each device.

There was only one use left, in the video device's ->open() method, looking
up the struct zoran for the opened device from the minor number.  This can
be done better with video_get_drvdata().

Since zoran_num is now only used in the pci driver's ->probe() method, it
doesn't need to be an atomic_t and be static.  There is a race if multiple
zoran cards could be probed at the same time, but currently the probe
method for a given driver is single threaded.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When initializing a module parameter that is a per-card array, use
"{ [0 ... (BUZ_MAX-1)] = -1 }" instead of "{ -1, -1, -1, -1 }".  This way
all of the entries will be correctly set to -1 if someone changes BUZ_MAX
to a value other than 4.

Adjust some of the parameter help text too.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When enabling a shared IRQ line, then saa7134_irq handler could be invoked
before the driver had completely set up internal structures, due to a shared
interrupt line firing.  Clear the saa7134 interrupt status reg, before
requesting the irq line, so that stale IRQ status isn't processed before the
internal structures are set up.

Marcin Slusarz recently brought this Oops to the attention of the v4l-dvb
lists and provided an initial analysis by investigating reports found here:

http://kerneloops.org/guilty.php?guilty=mute_input_7133&version=2.6.27-release&start=1802240&end=1835007&class=oopsReported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Analog support for HVR-1250 has not been completed, but does exist for
the HVR-1800.

Since both cards use the same driver, it tries to create the analog
dev for both devices, which is not possible.

This causes a NULL error to show up in video_open and mpeg_open.

-Mark

Iterations through the cx23885_devlist must check for NULL
pointers as some supported devices only have DVB support at the moment.
Mark Jenks encoutered an Oops in a system with both an HVR-1250 and HVR-1800
installed.

-Andy
Reported-by: NMark Jenks <mjenks1968@gmail.com>
Tested-by: NMark Jenks <mjenks1968@gmail.com>
Signed-off-by: NMark Jenks <mjenks1968@gmail.com>
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Register 0x2d has to be set differently in the saa7129 compared to the
saa7127. This was not done correctly, so S-Video was broken in certain
circumstances.

This fixes a regression introduced in 2.6.28.
Signed-off-by: NMartin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a really old and crufty driver that wasn't using the long
established pci driver framework.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
[mchehab@redhat.com: Cleaned up a few CodingStyle issues]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4lgrab  breaks the fputc macro on some systems, because of #defined
FILE.

Also, I also added comments because it was not at all clear that to get gspca
cameras to work with this application you need v4l1compat.
Signed-off-by: NSimon Harrison <si1356@yahoo.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If Hauppauge eeprom is corrupted, the driver returns tuner = 0, instead
of TUNER_ABSENT.

This makes the drivers to initialize tuner, instead of handling the
manual parameter.

Since the tuner core rejects that a tuner to have their type changed,
this breaks the manual tuner override.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Changeset 60b4bde4 removed an unused
struct on zoran driver, when compiled with "Y".

However, as pointed by Jean Delvare <khali@linux-fr.org>, this is
neeeded when the driver is compiled as a module, since udev relies on it
to auto-load the module.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Concurrent access to a single DVB CA 50221 interface slot is generally
discouraged. The underlying drivers (budget-av, budget-ci) do not implement
proper locking and thus two transactions could (and do) interfere with on
another.

This fixes the following problems seen by others and myself:

 - sudden i/o errors when writing to the ci device which usually would
   result in an undefined state of the hw and require a software restart

 - errors about the CAM trying to send a buffer larger than the agreed size
   usually also resulting in an undefined state of the hw

Due the to design of the DVB CA 50221 driver, implementing the locks in the
underlying drivers would not be enough and still leave some race conditions,
even though they were harder to trigger.
Signed-off-by: NMatthias Dahl <devel@mortal-soul.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

to avoid:
| tvp514x 0-005c: No platform data
| !!<3>tvp514x 0-005d: No platform data
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Randy Dunlap <randy.dunlap@oracle.com> wrote:

> linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c: In function 'cx88_call_i2c_clients':
> linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:122: error: 'struct cx88_core' has no member named 'gate_ctrl'
> linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:123: error: 'struct cx88_core' has no member named 'gate_ctrl'
> linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:127: error: 'struct cx88_core' has no member named 'gate_ctrl'
> linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:128: error: 'struct cx88_core' has no member named 'gate_ctrl'
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Commit 44f0079e erroneously considers all
GET_DEF requests as unsuccessful. Fix this by checking the request return
value.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The UVC specification release number is a binary-coded decimal number, print
it as such.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch introduces support for dvb-t for the following dibcom based card:
Terratec Cinergy T Express (USB-ID: 0ccd:0062)
Signed-off-by: NYusuf Altin <yusuf.altin@t-online.de>
Signed-off-by: NAlbert Comerma <albert.comerma@gmail.com>
Signed-off-by: NPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Removed unused #include <version.h>'s in files below,
  drivers/media/video/cs5345.c
  drivers/media/video/pwc/pwc-if.c
  drivers/media/video/saa717x.c
  drivers/media/video/upd64031a.c
  drivers/media/video/upd64083.c
  drivers/media/video/uvc/uvc_ctrl.c
  drivers/media/video/uvc/uvc_driver.c
  drivers/media/video/uvc/uvc_queue.c
  drivers/media/video/uvc/uvc_video.c
  drivers/media/video/uvc/uvc_status.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

em28xx were trying to access the third input entry, even for boards that
don't support it.

This patch reviews the input mux selection fixing this bug and a few
other troubles, like not validating the input on one userspace ioctl.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
  powerpc/pseries: Correct VIO bus accounting problem in CMO env.
  powerpc: More printing warning fixes for the l64 to ll64 conversion
  powerpc: Remove arch/ppc cruft from Kconfig
  powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
  powerpc/embedded6xx: Update defconfigs
  powerpc/8xx: Update defconfigs
  powerpc/86xx: Update defconfigs
  powerpc/83xx: Update defconfigs
  powerpc/85xx: Update defconfigs
  powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed
  powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
  powerpc/44x: Update PowerPC 44x defconfigs
  powerpc/40x: Update PowerPC 40x defconfigs
  powerpc/85xx: Fix typo in mpc8572ds dts
  powerpc/44x: Warp patches for the new NDFC driver
  powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix 5329 ColdFire periphal addressing
  uclinux: add process name to allocation error message
  m68knommu: correct the mii calculations for 532x ColdFire FEC
  m68knommu: add ColdFire M532x to the FEC configuration options
  m68knommu: fix syscall restarting
  m68knommu: remove the obsolete and long unused comempci chip support
  m68knommu: remove the no longer used PCI support option
  m68knommu: remove obsolete and unused eLIA board
  m68knommu: set NO_DMA
  m68knommu: fix cache flushing for the 527x ColdFire processors
  m68knommu: fix ColdFire 5272 serial baud rates in mcf.c
  m68knommu: use one exist from execption

Commit d7b1956f ("DMI: Introduce
dmi_first_match to make the interface more flexible") introduced compile
errors like the following when !CONFIG_DMI

    drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff':
    drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match'
    drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast

We just need a dummy version of dmi_first_match() to fix this all up.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Schedule a vblank signal, kill the process, and we'll go walking over freed
memory.  Given that no open-source userland exists using this, nor have I
ever heard of a consumer, just let this code die.
Signed-off-by: NEric Anholt <eric@anholt.net>
Requested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

_PAGE_COHERENT is now always set in _PAGE_RAM resp. PAGE_KERNEL.
Thus it has to be masked out, if the BAT mapping should be non
cacheable or CPU_FTR_NEED_COHERENT is not set.

This will work on normal SMP setups because we force-set
CPU_FTR_NEED_COHERENT as part of CPU_FTR_COMMON on SMP.
Signed-off-by: NGerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In the VIO bus code the wrappers for dma alloc_coherent and free_coherent
calls are rounding to IOMMU_PAGE_SIZE.  Taking a look at the underlying
calls, the actual mapping is promoted to PAGE_SIZE.  Changing the
rounding in these two functions fixes under-reporting the entitlement
used by the system.  Without this change, the system could run out of
entitlement before it believes it has and incur mapping failures at the
firmware level.

Also in the VIO bus code, the wrapper for dma map_sg is not exiting in
an error path where it should.  Rather than fall through to code for the
success case, this patch adds the return that is needed in the error path.
Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These are all powerpc specific drivers.

res.start in fsl_elbc_nand.c needs to be cast since it may be either 32
or 64 bit.  Thanks to Scott Wood for noticing.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular
Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices
Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Remove some leftover cruft from the arch/ppc days
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Manual merge of:
	arch/powerpc/configs/44x/warp_defconfig

Given just how hard it is to find the code that uses MAY_APPEND
it's probably not a big surprise that this went unnoticed for so
long. The Smack rules loading code is incorrectly setting the
MAY_READ bit when MAY_APPEND is requested.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>