Both RING_BUFFER_ALL_CPUS and TRACE_PIPE_ALL_CPU are defined as
-1 and used to say that all the ring buffers are to be modified
or read (instead of just a single cpu, which would be >= 0).

There's no reason to keep TRACE_PIPE_ALL_CPU as it is also started
to be used for more than what it was created for, and now that
the ring buffer code added a generic RING_BUFFER_ALL_CPUS define,
we can clean up the trace code to use that instead and remove
the TRACE_PIPE_ALL_CPU macro.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).

By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.

Keep the two buffers overwrite modes in sync.

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.

Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.

To free the snapshot buffer, a '0' is written into the snapshot file.

To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.

Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.

Here's what it looked like before:

 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

Here's what it looks like now:

 # tracer: nop
 #
 #
 # * Snapshot is freed *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')
Acked-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: NClark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lanSigned-off-by: NIngo Molnar <mingo@kernel.org>

On early boot up, when the ftrace ring buffer is initialized, the
static variable current_trace is initialized to &nop_trace.
Before this initialization, current_trace is NULL and will never
become NULL again. It is always reassigned to a ftrace tracer.

Several places check if current_trace is NULL before it uses
it, and this check is frivolous, because at the point in time
when the checks are made the only way current_trace could be
NULL is if ftrace failed its allocations at boot up, and the
paths to these locations would probably not be possible.

By initializing current_trace to &nop_trace where it is declared,
current_trace will never be NULL, and we can remove all these
checks of current_trace being NULL which never needed to be
checked in the first place.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.

Add "snapshot" debugfs file in "tracing" directory.

  snapshot:
    This is used to take a snapshot and to read the output of the
    snapshot.

     # echo 1 > snapshot

    This will allocate the spare buffer for snapshot (if it is
    not allocated), and take a snapshot.

     # cat snapshot

    This will show contents of the snapshot.

     # echo 0 > snapshot

    This will free the snapshot if it is allocated.

    Any other positive values will clear the snapshot contents if
    the snapshot is allocated, or return EINVAL if it is not allocated.

Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia

Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
   Fixed irqsoff selftest and also a conflict with a change
   that fixes the update_max_tr.
]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the trace buffer read functions use a static variable
"old_tracer" for detecting if the current tracer changes. This
was suitable for a single trace file ("trace"), but to add a
snapshot feature that will use the same function for its file,
a check against a static variable is not sufficient.

To use the output functions for two different files, instead of
storing the current tracer in a static variable, as the trace
iterator descriptor contains a pointer to the original current
tracer's name, that pointer can now be used to check if the
current tracer has changed between different reads of the trace
file.

Link: http://lkml.kernel.org/r/20121226025252.3252.9276.stgit@liselsiaSigned-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a stat about the number of events read from the ring buffer:

 #  cat /debug/tracing/per_cpu/cpu0/stats
entries: 39869
overrun: 870512
commit overrun: 0
bytes: 1449912
oldest event ts:  6561.368690
now ts:  6565.246426
dropped events: 0
read events: 112    <-- Added
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace iterator is already initialized by trace_init_global_iter(),
so there is no need to initialize it again.

Link: http://lkml.kernel.org/r/CACV3sb+G1YnO6168JhY3dEadmJi58pA5-2cSZT8E0WVHJNFt9Q@mail.gmail.comSigned-off-by: NJovi Zhang <bookjovi@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

__this_cpu_inc_return() or __this_cpu_dec generates a single instruction,
which is faster than __get_cpu_var operation.

Link: http://lkml.kernel.org/r/50A9C1BD.1060308@gmail.comReviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NShan Wei <davidshan@tencent.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Nothing outside of kernel/trace/trace.c references tracing_dentry_percpu().

Link: http://lkml.kernel.org/r/1353302917-13995-7-git-send-email-josh@joshtriplett.orgSigned-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's a race condition between the setting of a new tracer and
the update of the max trace buffers (the swap). When a new tracer
is added, it sets current_trace to nop_trace before disabling
the old tracer. At this moment, if the old tracer uses update_max_tr(),
the update may trigger the warning against !current_trace->use_max-tr,
as nop_trace doesn't have that set.

As update_max_tr() requires that interrupts be disabled, we can
add a check to see if current_trace == nop_trace and bail if it
does. Then when disabling the current_trace, set it to nop_trace
and run synchronize_sched(). This will make sure all calls to
update_max_tr() have completed (it was called with interrupts disabled).

As a clean up, this commit also removes shrinking and recreating
the max_tr buffer if the old and new tracers both have use_max_tr set.
The old way use to always shrink the buffer, and then expand it
for the next tracer. This is a waste of time.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Due to a userspace issue with PowerTop v2beta, which hardcoded
the offset of event fields that it was using, it broke when
we removed the Big Kernel Lock counter from the event header.

 (commit e6e1e259 "tracing: Remove lock_depth from event entry")

Because this broke userspace, it was determined that we must
keep those 4 bytes around.

 (commit a3a4a5ac "Regression: partial revert "tracing: Remove lock_depth from event entry"")

This unfortunately wastes space in the ring buffer. 4 bytes per
event, where a lot of events are just 24 bytes. That's 16% of the
buffer wasted. A million events will add 4 megs of white space
into the buffer.

It was later noticed that PowerTop v2beta could not work on systems
where the kernel was 64 bit but the userspace was 32 bits.
The reason was because the offsets are different between the
two and the hard coded offset of one would not work with the other.

With PowerTop v2 final, it implemented the same interface that both
perf and trace-cmd use. That is, it reads the format file of
the event to find the offsets of the fields it needs. This fixes
the problem with running powertop on a 32 bit userspace running
on a 64 bit kernel. It also no longer requires the 4 byte padding.

As PowerTop v2 has been out for a while, and is included in all
major distributions, it is time that we can safely remove the
4 bytes of padding. Users of PowerTop v2beta should upgrade to
PowerTop v2 final.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's now a check in tracing_reset_online_cpus() if the buffer is
allocated or NULL. No need to do a check before calling it with max_tr.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

max_tr->buffer could be NULL in the tracing_reset{_online_cpus}. In this
case, a NULL pointer dereference happens, so we should return immediately
from these functions.

Note, the current code does not call tracing_reset*() with max_tr when
its buffer is NULL, but future code will. This patch is needed to prevent
the future code from crashing.

Link: http://lkml.kernel.org/r/20121219070234.31200.93863.stgit@liselsiaSigned-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

typeof(&buffer) is a pointer to array of 1024 char, or char (*)[1024].
But, typeof(&buffer[0]) is a pointer to char which match the return type of get_trace_buf().
As well-known, the value of &buffer is equal to &buffer[0].
so return this_cpu_ptr(&percpu_buffer->buffer[0]) can avoid type cast.

Link: http://lkml.kernel.org/r/50A1A800.3020102@gmail.comReviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NShan Wei <davidshan@tencent.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 0fb9656d "tracing: Make tracing_enabled be equal to tracing_on"
changes the behaviour of trace_pipe, ie. it makes trace_pipe return if
we've read something and tracing is enabled, and this means that we have
to 'cat trace_pipe' again and again while running tests.

IMO the right way is if tracing is enabled, we always block and wait for
ring buffer, or we may lose what we want since ring buffer's size is limited.

Link: http://lkml.kernel.org/r/1358132051-5410-1-git-send-email-bo.li.liu@oracle.comSigned-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 02404baf "tracing: Remove deprecated tracing_enabled file"
removed the tracing_enabled file as it never worked properly and
the tracing_on file should be used instead. But the tracing_on file
didn't call into the tracers start/stop routines like the
tracing_enabled file did. This caused trace-cmd to break when it
enabled the irqsoff tracer.

If you just did "echo irqsoff > current_tracer" then it would work
properly. But the tool trace-cmd disables tracing first by writing
"0" into the tracing_on file. Then it writes "irqsoff" into
current_tracer and then writes "1" into tracing_on. Unfortunately,
the above commit changed the irqsoff tracer to check the tracing_on
status instead of the tracing_enabled status. If it's disabled then
it does not start the tracer internals.

The problem is that writing "1" into tracing_on does not call the
tracers "start" routine like writing "1" into tracing_enabled did.
This makes the irqsoff tracer not start when using the trace-cmd
tool, and is a regression for userspace.

Simple fix is to have the tracing_on file call the tracers start()
method when being enabled (and the stop() method when disabled).
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The latest change to allow trace options to be set on the command
line also broke the trace_options file.

The zeroing of the last byte of the option name that is echoed into
the trace_option file was removed with the consolidation of some
of the code. The compare between the option and what was written to
the trace_options file fails because the string holding the data
written doesn't terminate with a null character.

A zero needs to be added to the end of the string copied from
user space.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.
Signed-off-by: NNadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

WARN shouldn't be used as a means of communicating failure to a userspace programmer.

Link: http://lkml.kernel.org/r/20120725153908.GA25203@redhat.comSigned-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Trace buffer size is now per-cpu, so that there are the following two
patterns in resizing of buffers.

  (1) resize per-cpu buffers to same given size
  (2) resize per-cpu buffers to another trace_array's buffer size
      for each CPU (such as preparing the max_tr which is equivalent
      to the global_trace's size)

__tracing_resize_ring_buffer() can be used for (1), and had
implemented (2) inside it for resetting the global_trace to the
original size.

(2) was also implemented in another place. So this patch assembles
them in a new function - resize_buffer_duplicate_size().

Link: http://lkml.kernel.org/r/20121017025616.2627.91226.stgit@falsitaSigned-off-by: NHiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Show raw time stamp values for stats per cpu if you choose counter or tsc mode
for trace_clock. Although a unit of tracing time stamp is nsec in local or global mode,
the units in counter and TSC mode are tracing counter and cycles respectively.
Link: http://lkml.kernel.org/r/1352837903-32191-3-git-send-email-dhsharp@google.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the addition of the "tsc" clock, formatting timestamps to look like
fractional seconds is misleading. Mark clocks as either in nanoseconds or
not, and format non-nanosecond timestamps as decimal integers.

Tested:
$ cd /sys/kernel/debug/tracing/
$ cat trace_clock
[local] global tsc
$ echo sched_switch > set_event
$ echo 1 > tracing_on ; sleep 0.0005 ; echo 0 > tracing_on
$ cat trace
          <idle>-0     [000]  6330.555552: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=29964 next_prio=120
           sleep-29964 [000]  6330.555628: sched_switch: prev_comm=bash prev_pid=29964 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...
$ echo 1 > options/latency-format
$ cat trace
  <idle>-0       0 4104553247us+: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=29964 next_prio=120
   sleep-29964   0 4104553322us+: sched_switch: prev_comm=bash prev_pid=29964 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...
$ echo tsc > trace_clock
$ cat trace
$ echo 1 > tracing_on ; sleep 0.0005 ; echo 0 > tracing_on
$ echo 0 > options/latency-format
$ cat trace
          <idle>-0     [000] 16490053398357: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=31128 next_prio=120
           sleep-31128 [000] 16490053588518: sched_switch: prev_comm=bash prev_pid=31128 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...
echo 1 > options/latency-format
$ cat trace
  <idle>-0       0 91557653238+: sched_switch: prev_comm=swapper prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=bash next_pid=31128 next_prio=120
   sleep-31128   0 91557843399+: sched_switch: prev_comm=bash prev_pid=31128 prev_prio=120 prev_state=S ==> next_comm=swapper next_pid=0 next_prio=120
  ...

v2:
Move arch-specific bits out of generic code.
v4:
Fix x86_32 build due to 64-bit division.

Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-2-git-send-email-dhsharp@google.com

Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In order to promote interoperability between userspace tracers and ftrace,
add a trace_clock that reports raw TSC values which will then be recorded
in the ring buffer. Userspace tracers that also record TSCs are then on
exactly the same time base as the kernel and events can be unambiguously
interlaced.

Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large
timestamp values.

v2:
Move arch-specific bits out of generic code.
v3:
Rename "x86-tsc", cleanups
v7:
Generic arch bits in Kbuild.

Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.comAcked-by: NIngo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add trace_options to the kernel command line parameter to be able to
set options at early boot. For example, to enable stack dumps of
events, add the following:

  trace_options=stacktrace

This along with the trace_event option, you can get not only
traces of the events but also the stack dumps with them.
Requested-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).

With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The tracing_enabled file was used as a quick way to stop
tracers, and try to bring down overhead for things like
the latency tracers (irqsoff, wakeup, etc). But it didn't
work that well.

The tracing_on file was created as a really fast way to
stop recording into the ftrace ring buffer and can interact
with the kernel. That is a tracing_off() call in the kernel
can disable recording of events, and then from userspace one
could echo 1 into the tracing_on file to continue it. The
tracing_enabled function did too much to allow for this.

The tracing_on has taken over as a way to start and stop tracing
and the tracing_enabled file should not be used. But because of
its existance, it still confuses people. Over a year ago the
following commit was added:

 commit 6752ab4a
 Author: Steven Rostedt <srostedt@redhat.com>
 Date:   Tue Feb 8 13:54:06 2011 -0500

    tracing: Deprecate tracing_enabled for tracing_on

This commit added a WARN_ON() if the tracing_enabled file's variable
was changed. After this was added, only LatencyTop complained, and
they soon fixed their tool as there was no reason that LatencyTop
should touch this file as it was using the perf ring buffers which
this file does not interact with. But since that time no one else
has complained about this WARN_ON(). Thus it is safe to assume that
this file is no longer needed. Time to get rid of it.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The tracing_enabled file has been deprecated as it never was able
to serve its purpose well. The tracing_on file has taken over.
Instead of having code to keep tracing_enabled, have the tracing_enabled
file just set tracing_on, and remove the tracing_enabled variable.

This allows us to remove the tracing_enabled file. The reason that
the remove is in a different change set and not removed here is
in case we find some lonely userspace tool that requires the file
to exist. Then the removal patch will get reverted, but this one
will not.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The function register_tracer() is only used by kernel core code,
that never needs to remove the tracer. As trace_events have become
the main way to add new tracing to the kernel, the need to
unregister a tracer has diminished. Remove the unused function
unregister_tracer(). If a need arises where we need it, then we
can always add it back.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Because the "tsc" clock isn't in nanoseconds, the ring buffer must be
reset when changing clocks so that incomparable timestamps don't end up
in the same trace.

Tested: Confirmed switching clocks resets the trace buffer.

Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1349998076-15495-3-git-send-email-dhsharp@google.com

Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NDavid Sharp <dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.

Here's an example, if you enable the following events:

echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable

Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:

echo 0 > /debug/tracing/events/net/net_dev_xmit/enable

and look at the trace:

cat /debug/tracing/trace
            sshd-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
            sshd-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:

cat /debug/tracing/trace
           <...>-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
           <...>-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

The stored "sshd" comm has been flushed out and we get a useless "<...>".

But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If comm recording is not enabled when trace_printk() is used then
you just get this type of output:

[ adding trace_printk("hello! %d", irq); in do_IRQ ]

           <...>-2843  [001] d.h.    80.812300: do_IRQ: hello! 14
           <...>-2734  [002] d.h2    80.824664: do_IRQ: hello! 14
           <...>-2713  [003] d.h.    80.829971: do_IRQ: hello! 14
           <...>-2814  [000] d.h.    80.833026: do_IRQ: hello! 14

By enabling the comm recorder when trace_printk is enabled:

       hackbench-6715  [001] d.h.   193.233776: do_IRQ: hello! 21
            sshd-2659  [001] d.h.   193.665862: do_IRQ: hello! 21
          <idle>-0     [001] d.h1   193.665996: do_IRQ: hello! 21
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.

This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.

On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.

Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.comSigned-off-by: NSlava Pestov <slavapestov@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>