This reverts commit 'e9c390df ("ASoC: rsnd: make sure it uses lock when
it calls rsnd_dai_call)' The additional locks make 1") lock issue when boot
2) lock issue when unbind/rmmod. And there is no problem without these
locks. This patch revert it.
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rsnd might be used in multi-codec sound card.
Then, same name kcontrol will be registered many times, and it will
be error. This patch fixes this issue by using .index
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rsnd_dai_call() should be called under rsnd_lock
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Using standardized function/macro name is useful in driver
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

A driver's device data should and can be const. This is a follow-up on
commit 33187fb4 (ASoC: rsnd: constify of_device_id array) which
marked the of_device_id as const.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch supports DPCM based sampling rate convert on Renesas sound
driver. It assumes...
 1. SRC is implemented as FE
 2. BE dai_link supports .be_hw_params_fixup
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

clk_prepare_enable()/clk_disable_unprepare() uses mutex inside,
in concretely clk_prepare()/clk_unprepare().And it uses __schedule().
Then, raw_spin_lock/unlock_irq() is called, and it breaks Renesas
sound driver's spin lock irq.
This patch separates thesse into clk_prepare()/clk_unprepare() and
clk_enable/clk_disable. And call clk_prepare()/clk_unprepare() from
probe/remove function. Special thanks to Das Biju.
Reported-by: NDas Biju <biju.das@bp.renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds missing dai_link stream_name
which is used when DPCM
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This driver sometimes fixups debug/error message format
30cc4faf
(ASoC: rsnd: tidyup debug message format and timing)
337b0b4c
(ASoC: rsnd: error meesage indicates its port)
But, it still exist un-fomated error message. This patch fixup it
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.

dma-names on DT was implemented as no difference between 1st / 2nd
DMAC's, since rsnd had assumed that both DMACs are implemented as
DMAEngine. That style was "src_dst". But now, 2nd DMAC was implemented
as non DMAEngine, and it doesn't need dma-names anymore. So, this
dma-names rule is no longer needed.

And additionally, dma-names was assumed that it has all
(= SSI/SSIU/SRC/DVC) nodes under sound node.

In upstream code, no SoC/platform is supporting DMA for rsnd driver yet.
This means there is no compatible issue if this patch changes
dma-names's rule of DT.

This patch assumes dma-names for 1st DMAC are tx/rx base, and listed
in each SSI/SRC/DVC subnode
ex)
	rcar_sound,dvc {
		dvc0: dvc@0 {
			dmas = <&audma0 0xbc>;
			dma-names = "tx";
		};
	...

	rcar_sound,src {
		src0: src@0 {
			...
			dmas = <&audma0 0x85>, <&audma1 0x9a>;
			dma-names = "rx", "tx";
		};
	...

	rcar_sound,ssi {
		ssi0: ssi@0 {
			...
			dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
			dma-names = "rx", "tx", "rxu", "txu";
		};
	...
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas R-Car sound (= rsnd) needs 2 DMAC which are called as
Audio DMAC (= 1st DMAC) and Audio DMAC peri peri (2nd DMAC).
And rsnd had assumed that 1st / 2nd DMACs are implemented as DMAEngine.
But, in result of DMA ML discussion, 2nd DMAC was concluded that it is
not a general purpose DMAC (2nd DMAC is for Device to Device inside
sound system). Additionally, current DMAEngine can't support Device to
Device, and we don't have correct DT bindings for it at this point.
So the easiest solution for it is that move it from DMAEngine to rsnd
driver.
Audio DMAC peri peri is controlled from sound driver without DMAEngine
by this patch.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas sound driver had been assumed that Audio DMAC /
Audio DMAC peri peri are implemented by DMAEngine. But, result of DMA
ML discussion, it was concluded that it is not a general purpose DMAC.
And it should be moved from current DMAEngine to rsnd driver.
So, Audio DMAC peri peri become non DMAEngine.

OTOH, ALSA SoC has soc-generic-dmaengine-pcm implementation. but it
seems difficult to use this generic implementation on rsnd driver at
this point, since it needs to fallback to PIO mode if DMA can't use.
and additionally it needs 2 DMAC (= Audio DMAC / Audio DMAC peri peri).
These are not "generic" feature.

Of course I will try to use this generic dmaengine in the future somehow,
but just use current style at this point until it can formally use 2 DMACs.
This patch adds new dma.c and moves current dma code to dma.c from core.c.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

priv is not used on rsnd_dma_quit()
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rsnd_dma_available() is not used. Let's remove it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

It can get DMA direction via rsnd_dai_stream.
Remove un-needed is_play from rsnd_dma_init().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Renesas R-Car sound had SH-DMA-BASE specific implementation before,
but, now, it is no longer needed. Let's remove it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Set device data before snd_soc_register_platform/component.
Otherwise, it will use NULL pointer if user calls unbind -> bind or
rmmod -> insmod
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current Renesas R-Car sound driver doesn't call
snd_soc_unregiter_component/platform() in .remove.
This patch call these functions.
Reported-by: NNguyen Viet Dung <nv-dung@jinso.co.jp>
Reported-by: NBui Duc Phuc <bd-phuc@jinso.co.jp>
Reported-by: NCao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current Renesas R-Car sound driver is using snd_ctl_xxx()
functions, but it didn't call snd_ctl free_one() / snd_ctl_remove().
This patch call these functions.
Reported-by: NNguyen Viet Dung <nv-dung@jinso.co.jp>
Reported-by: NBui Duc Phuc <bd-phuc@jinso.co.jp>
Reported-by: NCao Minh Hiep <cm-hiep@jinso.co.jp>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver has rsnd_mod_to_priv() macro, and struct rsnd_mod
has struct rsnd_priv pointer. But, it is waste of memory from data
structure point of view.
Today we can link mod <-> io <-> rdai each other, so saving priv in
rdai is very reasonable.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver's function requests rdai, but it is not used.
Adding priv is more reasonable. Let's replace it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver's many functions requests struct rsnd_dai (= rdai),
but, 1) we can get rdai from rsnd_io_to_rsnd(), 2) almost all rdai
is not used. Let's remove these rdai.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver can use rsnd_io_to_rdai()
we can get play/capture direction via io now.
Let's replace rsnd_dai_is_play() to rsnd_io_is_play()
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver request rdai in everywhere, but each mod should
reach to rdai by itself. this patch adds missing rsnd_io_to_rdai().

io   = rsnd_mod_to_io(mod);
rdai = rsnd_io_to_rdai(io);
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rsnd_dai_get_platform_info() is not used. Let's remove it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rsnd_dai_id() was not used. Let's remove it
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

struct rsnd_dai is called as "rdai", and struct snd_soc_dai is called
as "dai" on this driver. but macro/function have confusable naming.
This patch rename rsnd_dai_get() to rsnd_rdai_get()
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current rsnd driver's mod (= ssi/src/dvc) have each own clk,
but, these are needed to start/stop each mod.
This patch adds struct clk in rsnd_mod, and start/stop these
via rsnd_mod_hw_start/stop() macro
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The ALSA core takes care that all preallocated memory is freed when the PCM
itself is freed. There is no need to do this manually in the driver.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current DVC is using snd_kcontrol_new functions, but, SRC will need
same method. Move common functions to core.c
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

R-Car sound can use SSI/SRC/DVC modules, and these are controlled as
rsnd_mod in rsnd driver. These rsnd_mod has each own function as
callback. Basically these callback function has pair like probe/remove,
start/stop, etc. And, these functions are called by order to each stage
like below.
 1. src->probe
 2. ssi->probe
 3. dvc->probe
 4. src->start
 5. ssi->start
 6. dvc->start
 7. src->stop
 8. ssi->stop
 9. dvc->stop
10. src->remove
11. ssi->remove
12. dvc->remove

But, current rsnd driver doesn't care about its status which indicates
which function is called.
For example, if 5) returns error, 6) is not called. In such case,
9) should not be called. This patch care about each modules status.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current R-Car sound has PIO fallback support if it couldn't use DMA.
This fallback is done in .remove callback, but, it should have
.fallback callback. Otherwise, normal .remove callback will have
strange behavior. This patch adds .fallback callback.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current Renesas R-Car sound driver probe will be failed
if it try to use DMA mode and it couldn't use for some reasons.
But PIO mode works even though in such case.
This patch try to fallback to PIO mode if DMA mode probing was failed.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Current Renesas R-Car sound driver debug message
is using random format
(ex "ssi0: xxx" / "SSI0 xxx" / "ssi[0]: xxx")
and confusable timing
("xxx probe failed" and "xxx probed" are shown in same time)
This patch fixes these
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

R-Car sound doesn't support PAUSE.
Remove SNDRV_PCM_INFO_PAUSE flags from snd_pcm_hardware info
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Of_node_put supports NULL as its argument, so the initial test is not
necessary.

Suggested by Uwe Kleine-König.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

-if (e)
   of_node_put(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NMark Brown <broonie@linaro.org>

In current R-Car rsnd driver,
the SND_SOC_DAIFMT_xB_xF flags are used to HW default behavior,
but, it should be used to specific format.
The waveforms of LEFT_J/RIGHT_J format with
SND_SOC_DAIFMT_NB_NF flag will be
started from "falling edge" without this patch.
But, it should be started from "rising edge".
Reported-by: NJun Watanabe <jun.watanabe.ue@renesas.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

bff58ea4
(ASoC: rsnd: add DVC support) added DVC support,
and it added pcm_new callback feature for it.
Then it called all DAI's pcm_new callback, and it was wrong.
This patch fixup it and call correct callback.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

rsnd driver is using SSI/SRC/DVC which are
using "mod" base operation.
These "mod" are supporting "probe" and "remove" callbacks.

Current rsnd_probe should call "remove" if "probe" was failed,
since "probe" might be having DMAEngine handle.
Some mod's "remove" callback might be called without calling
"probe", but it is no problem. because "remove" do nothing
in such case.

So, all mod's "remove" should be called when error case
of rsnd_probe() and rsnd_remove().
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>