Things such as mis-indent, and space at beginning of line.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Extended fix to: "Don't read EDID in atomic_check"

Fix issue of missing dc_sink in .mode_valid in hot plug routine.

Need to check dc_sink everytime in .get_modes hook after checking
edid, since edid is not getting removed in hot unplug but dc_sink
doesn't.
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Extended fix to: "Don't read EDID in atomic_check"

Fix display property not observed in GUI display after hot plug.

Call drm_mode_connector_update_edid_property every time in
.get_modes hook, due to the fact that edid property is getting
removed from usermode ioctl DRM_IOCTL_MODE_GETCONNECTOR each time
in hot unplug.
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The below commit

    "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2"

introduces a slight behavioral change to rmfb. Instead of disabling a crtc
when the primary plane is disabled, it now preserves it.

Since DC is currently not equipped to handle this we need to fail such
a commit, otherwise we might see a corrupted screen.

This is based on Shirish's previous approach but avoids adding all
planes to the new atomic state which leads to a full update in DC for
any commit, and is not what we intend.

Theoretically DM should be able to deal with states with fully populated planes,
even for simple updates, such as cursor updates. This should still be
addressed in the future.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge amdgpu_dm_display_resume function into dm_resume,
as it is not called anywhere else anymore.

Initially the call was broken down into 2 functions for cursor corruption
issue. Now the issue is not visible, hence the dm_resume will perform
dm_display_resume in it.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Lock irq table when reading a work in queue,
unlock to flush the work, lock again till all tasks
are cleared
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add CHIP_VEGAM
Signed-off-by: NJerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It returns supported domains for display, and domains actually used are to be
decided later when pinned.
Signed-off-by: NSamuel Li <Samuel.Li@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Even though this is required for degamma since DCE HW only supports a
couple predefined LUTs we can just program the LUT directly for regamma.

This fixes dark screens which occurs when we program regamma to bypass
while degamma is using srgb LUT.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This seems to cause flickering and lock-ups for a wide range of users.
Revert until we've found a proper fix for the flickering and lock-ups.

This reverts commit 36cc549d.

Cc: Shirish S <shirish.s@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit cd2d6c92.

Cc: Shirish S <shirish.s@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Input transfer function creation is now done when the plane is created.
This is done within the following change:

    Author: Anthony Koo <Anthony.Koo@amd.com>
        drm/amd/display: Have DC manage its own allocation of gamma

Therefore, we no longer need to create it when filling in the plane
attributes.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Creating plane will also allocate gamma and input TF
Creating stream will also allocate outputTF

Fix issue with gamma not applied
OS may call SetGamma before surface committed, so need to store
in target and apply later.
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As per eDP 1.4 spec, there must be at least 500ms delay
between eDP power off and on.
This change added time stamp when edp power off, which can
be used to calculate duration time when edp power on.
If duration less than 500ms, add a wait.
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We use this to ensure we wait at least 500ms in between eDP
disable/enable.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Created Macros for DC_LOG_XXX to pr_debug() & DRM_DEBUG_KMS.
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We're an atomic driver and shouldn't access legacy properties. Doing so
will only scare users with stack traces.

Instead save the prop in the state and access it directly. Much simpler.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Trivial fix to spelling mistake in DRM_ERROR error message text
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use forward declaration in amdgpu_dm.h for struct dc instand
of include dc.h to make header files more standalone
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

amdgpu_dm_display_resume was merged into dm_resume.
No need to call these functions separately.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We shouldn't attempt to read EDID in atomic_check. We really shouldn't
even be modifying the connector object, or any other non-state object,
but this is a start at least.

Moving EDID cleanup to dm_dp_mst_connector_destroy from
dm_dp_destroy_mst_connector to ensure the EDID is still available for
headless mode.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add support for vega12 to the display manager.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>

DC takes channel count to mean the actual count. cea_sad's channels
represent it as number of channels - 1.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is still a leftover from early atomic brinup days.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This patch fixes static checker warning caused by
"36cc549d: "drm/amd/display: disable CRTCs with
NULL FB on their primary plane (V2)"
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch fixes static checker warning caused by
"36cc549d: "drm/amd/display: disable CRTCs with
NULL FB on their primary plane (V2)"
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds an essential check related to the size of the
payload to be transferred via aux channel.

Without this check dal_ddc_service_read_dpcd_data() is fed with
inappropriate payload size leading to deadlocks.
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is preparation for sharing client ID definitions
between amdgpu and amdkfd
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The order of planes is given by the order they are enumerated
by kms.
Planes with a higher ID appears above planes with a lower ID.

Currently the planes are enumerated in the wrong order,
putting the nv12 only plane after the two RGBA planes.

This patch corrects the plane enumeration order such that all
the overlay planes are initialized first then the primary planes.

Due to this change in order the dc_add_plane_to_context() shall
receive the planes in reverse order hence this patch reverses
the parsing of planes in DM side itself.

v2: drop local reverse macro for upstream
Signed-off-by: NShirish S <shirish.s@amd.com>
Signed-off-by: NPratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DRM's documentation for the color transform matrix does not specify
whether the values are in signed-magnitude, or 2's complement.
Therefore, it was assumed to use 2's complement.

However, existing usermode implementations use signed-magnitude.
Therefore, conform to existing standards, and convert to 2's complement
internally.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Should return -ENOMEM when allocation fails.
Also, just return the error code instead of using a variable.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

While checking plane states for updates during atomic check, we create
dc_plane_states in preparation. These dc states should be freed if
something errors.

Although the input transfer function is also freed by
dc_plane_state_release(), we should free it (on error) under the same
scope as where it is created.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

While checking plane states for updates during atomic check, we create
dc_plane_states in preparation. These dc states should be freed if
something errors.

Although the input transfer function is also freed by
dc_plane_state_release(), we should free it (on error) under the same
scope as where it is created.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>