This reverts commit 14516bb7.

This was causing regression test failures with generic/285 with an ext3
filesystem using CONFIG_EXT4_USE_FOR_EXT23.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Prevent BUG or corrupted file systems after the following:

mkfs.ext4 /dev/vdc 100M
mount -t ext4 -o sb=40961 /dev/vdc /vdc
resize2fs /dev/vdc

We previously prevented online resizing using the old resize ioctl.
Move the code to ext4_resize_begin(), so the check applies for all of
the resize ioctl's.
Reported-by: NMaxim Malkov <malkov@ispras.ru>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Testcase:
xfstests generic/270
MKFS_OPTIONS="-q -I 256 -O inline_data,64bit"

Call Trace:
 [<ffffffff81144c76>] lock_page+0x35/0x39 -------> DEADLOCK
 [<ffffffff81145260>] pagecache_get_page+0x65/0x15a
 [<ffffffff811507fc>] truncate_inode_pages_range+0x1db/0x45c
 [<ffffffff8120ea63>] ? ext4_da_get_block_prep+0x439/0x4b6
 [<ffffffff811b29b7>] ? __block_write_begin+0x284/0x29c
 [<ffffffff8120e62a>] ? ext4_change_inode_journal_flag+0x16b/0x16b
 [<ffffffff81150af0>] truncate_inode_pages+0x12/0x14
 [<ffffffff81247cb4>] ext4_truncate_failed_write+0x19/0x25
 [<ffffffff812488cf>] ext4_da_write_inline_data_begin+0x196/0x31c
 [<ffffffff81210dad>] ext4_da_write_begin+0x189/0x302
 [<ffffffff810c07ac>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff810ddd13>] ? read_seqcount_begin.clone.1+0x9f/0xcc
 [<ffffffff8114309d>] generic_perform_write+0xc7/0x1c6
 [<ffffffff810c040e>] ? mark_held_locks+0x59/0x77
 [<ffffffff811445d1>] __generic_file_write_iter+0x17f/0x1c5
 [<ffffffff8120726b>] ext4_file_write_iter+0x2a5/0x354
 [<ffffffff81185656>] ? file_start_write+0x2a/0x2c
 [<ffffffff8107bcdb>] ? bad_area_nosemaphore+0x13/0x15
 [<ffffffff811858ce>] new_sync_write+0x8a/0xb2
 [<ffffffff81186e7b>] vfs_write+0xb5/0x14d
 [<ffffffff81186ffb>] SyS_write+0x5c/0x8c
 [<ffffffff816f2529>] system_call_fastpath+0x12/0x17
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

It is ridiculous practice to scan inode block by block, this technique
applicable only for old indirect files. This takes significant amount
of time for really large files. Let's reuse ext4_fiemap which already
traverse inode-tree in most optimal meaner.

TESTCASE:
ftruncate64(fd, 0);
ftruncate64(fd, 1ULL << 40);
/* lseek will spin very long time */
lseek64(fd, 0, SEEK_DATA);
lseek64(fd, 0, SEEK_HOLE);

Original report: https://lkml.org/lkml/2014/10/16/620Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently ext4_inline_data_fiemap ignores requested arguments (start
and len) which may lead endless loop if start != 0.  Also fix incorrect
extent length determination.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4_da_convert_inline_data_to_extent() invokes
grab_cache_page_write_begin().  grab_cache_page_write_begin performs
memory allocation, so fs-reentrance should be prohibited because we
are inside journal transaction.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Option journal_async_commit breaks gurantees of data=ordered mode as it
sends only a single cache flush after writing a transaction commit
block. Thus even though the transaction including the commit block is
fully stored on persistent storage, file data may still linger in drives
caches and will be lost on power failure. Since all checksums match on
journal recovery, we replay the transaction thus possibly exposing stale
user data.

To fix this data exposure issue, remove the possibility to use
journal_async_commit in data=ordered mode.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Setting retval to zero is not needed in ext4_unlink.
Remove unneeded code.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAshish Sangwan <a.sangwan@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

This was fixed for ext3 with:

e6d8fb34 ext3: Count internal journal as bsddf overhead in ext3_statfs

but was never fixed for ext4.

With a large external journal and no used disk blocks, df comes
out negative without this, as journal blocks are added to the
overhead & subtracted from used blocks unconditionally.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

path[depth].p_hdr can never be NULL for a path passed to us (and even if
it could, EXT_LAST_EXTENT() would make something != NULL from it). So
just remove the branch.

Coverity-id: 1196498
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Create a mount option to disable journal checksumming (because the
metadata_csum feature turns it on by default now), and fix remount not
to allow changing the journal checksumming option, since changing the
mount options has no effect on the journal.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4_delete_inode() has been renamed for a long time, update
comments for this.
Signed-off-by: NWang Shilong <wshilong@ddn.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

We must use GFP_NOFS instead GFP_KERNEL inside ext4_mb_add_groupinfo
and ext4_calculate_overhead() because they are called from inside a
journal transaction. Call trace:

ioctl
 ->ext4_group_add
   ->journal_start
   ->ext4_setup_new_descs
     ->ext4_mb_add_groupinfo -> GFP_KERNEL
   ->ext4_flex_group_add
     ->ext4_update_super
       ->ext4_calculate_overhead  -> GFP_KERNEL
   ->journal_stop
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Introduce a simple aging to extent status tree. Each extent has a
REFERENCED bit which gets set when the extent is used. Shrinker then
skips entries with referenced bit set and clears the bit. Thus
frequently used extents have higher chances of staying in memory.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently flags for extent status tree are defined twice, once shifted
and once without a being shifted. Consolidate these definitions into one
place and make some computations automatic to make adding flags less
error prone. Compiler should be clever enough to figure out these are
constants and generate the same code.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently we scan extent status trees of inodes until we reclaim nr_to_scan
extents. This can however require a lot of scanning when there are lots
of delayed extents (as those cannot be reclaimed).

Change shrinker to work as shrinkers are supposed to and *scan* only
nr_to_scan extents regardless of how many extents did we actually
reclaim. We however need to be careful and avoid scanning each status
tree from the beginning - that could lead to a situation where we would
not be able to reclaim anything at all when first nr_to_scan extents in
the tree are always unreclaimable. We remember with each inode offset
where we stopped scanning and continue from there when we next come
across the inode.

Note that we also need to update places calling __es_shrink() manually
to pass reasonable nr_to_scan to have a chance of reclaiming anything and
not just 1.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently callers adding extents to extent status tree were responsible
for adding the inode to the list of inodes with freeable extents. This
is error prone and puts list handling in unnecessarily many places.

Just add inode to the list automatically when the first non-delay extent
is added to the tree and remove inode from the list when the last
non-delay extent is removed.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In this commit we discard the lru algorithm for inodes with extent
status tree because it takes significant effort to maintain a lru list
in extent status tree shrinker and the shrinker can take a long time to
scan this lru list in order to reclaim some objects.

We replace the lru ordering with a simple round-robin.  After that we
never need to keep a lru list.  That means that the list needn't be
sorted if the shrinker can not reclaim any objects in the first round.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Currently extent status tree doesn't cache extent hole when a write
looks up in extent tree to make sure whether a block has been allocated
or not.  In this case, we don't put extent hole in extent cache because
later this extent might be removed and a new delayed extent might be
added back.  But it will cause a defect when we do a lot of writes.  If
we don't put extent hole in extent cache, the following writes also need
to access extent tree to look at whether or not a block has been
allocated.  It brings a cache miss.  This commit fixes this defect.
Also if the inode doesn't have any extent, this extent hole will be
cached as well.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

For bigalloc filesystems we have to check whether newly requested inode
block isn't already part of a cluster for which we already have delayed
allocation reservation. This check happens in ext4_ext_map_blocks() and
that function sets EXT4_MAP_FROM_CLUSTER if that's the case. However if
ext4_da_map_blocks() finds in extent cache information about the block,
we don't call into ext4_ext_map_blocks() and thus we always end up
getting new reservation even if the space for cluster is already
reserved. This results in overreservation and premature ENOSPC reports.

Fix the problem by checking for existing cluster reservation already in
ext4_da_map_blocks(). That simplifies the logic and actually allows us
to get rid of the EXT4_MAP_FROM_CLUSTER flag completely.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4_ext_remove_space() can incorrectly free a partial_cluster if
EAGAIN is encountered while truncating or punching.  Extent removal
should be retried in this case.

It also fails to free a partial cluster when the punched region begins
at the start of a file on that unaligned cluster and where the entire
file has not been punched.  Remove the requirement that all blocks in
the file must have been freed in order to free the partial cluster.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Add some casts and rearrange a few statements for improved readability.
Some code can also be simplified and made more readable if we set
partial_cluster to 0 rather than to a negative value when we can tell
we've hit the left edge of the punched region.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The fix in commit ad6599ab ("ext4: fix premature freeing of
partial clusters split across leaf blocks"), intended to avoid
dereferencing an invalid extent pointer when determining whether a
partial cluster should be freed, wasn't quite good enough.  Assure that
at least one extent remains at the start of the leaf once the hole has
been punched.  Otherwise, the pointer to the extent to the right of the
hole will be invalid and a partial cluster will be incorrectly freed.

Set partial_cluster to 0 when we can tell we've hit the left edge of
the punched region within the leaf.  This prevents incorrect freeing
of a partial cluster when ext4_ext_rm_leaf is called one last time
during extent tree traversal after the punched region has been removed.

Adjust comments to reflect code changes and a correction.  Remove a bit
of dead code.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The partial_cluster variable is not always initialized correctly when
hole punching on bigalloc file systems.  Although commit c0634493
("ext4: fix partial cluster handling for bigalloc file systems")
addressed the case where the right edge of the punched region and the
next extent to its right were within the same leaf, it didn't handle
the case where the next extent to its right is in the next leaf.  This
causes xfstest generic/300 to fail.

Fix this by replacing the code in c0634493922 with a more general
solution that can continue the search for the first cluster to the
right of the punched region into the next leaf if present.  If found,
partial_cluster is initialized to this cluster's negative value.
There's no need to determine if that cluster is actually shared;  we
simply record it so its blocks won't be freed in the event it does
happen to be shared.

Also, minimize the burden on non-bigalloc file systems with some minor
code simplification.
Signed-off-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Xiaoguang Wang has reported sporadic EBUSY failures of ext4/302
Unfortunetly there is nothing we can do if some other task holds BH's
refenrence.  So we must return EBUSY in this case.  But we can try
kicking the journal to see if the other task releases the bh reference
after the commit is complete.  Also decrease false positives by
properly checking for ENOSPC and retrying the allocation after kicking
the journal --- which is done by ext4_should_retry_alloc().

[ Modified by tytso to properly check for ENOSPC. ]
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Pull MTD fixes from Brian Norris:
 "Three main MTD fixes for 3.18:

   - A regression from 3.16 which was noticed in 3.17.  With the
     restructuring of the m25p80.c driver and the SPI NOR library
     framework, we omitted proper listing of the SPI device IDs.  This
     means m25p80.c wouldn't auto-load (modprobe) properly when built as
     a module.  For now, we duplicate the device IDs into both modules.

   - The OMAP / ELM modules were depending on an implicit link ordering.
     Use deferred probing so that the new link order (in 3.18-rc) can
     still allow for successful probing.

   - Fix suspend/resume support for LH28F640BF NOR flash"

* tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips
  mtd: omap: fix mtd devices not showing up
  mtd: m25p80,spi-nor: Fix module aliases for m25p80
  mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
  mtd: m25p80: get rid of spi_get_device_id

Pull SCSI fixes from James Bottomley:
 "This is a set of six patches consisting of:
   - two MAINTAINER updates
   - two scsi-mq fixs for the old parallel interface (not every request
     is tagged and we need to set the right flags to populate the SPI
     tag message)
   - a fix for a memory leak in scatterlist traversal caused by a
     preallocation update in 3.17
   - an ipv6 fix for cxgbi"

[ The scatterlist fix also came in separately through the block layer tree ]

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: ufs - remove self
  MAINTAINERS: change hpsa and cciss maintainer
  libcxgbi : support ipv6 address host_param
  scsi: set REQ_QUEUE for the blk-mq case
  Revert "block: all blk-mq requests are tagged"
  lib/scatterlist: fix memory leak with scsi-mq

Pull drm fixes from Dave Airlie:
 "Nothing too astounding or major: radeon, i915, vmwgfx, armada and
  exynos.

  Biggest ones:
   - vmwgfx has one big locking regression fix
   - i915 has come displayport fixes
   - radeon has some stability and a memory alloc failure
   - armada and exynos have some vblank fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits)
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs
  drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.
  drm/vmwgfx: Fix hash key computation
  drm/vmwgfx: fix lock breakage
  drm/i915/dp: only use training pattern 3 on platforms that support it
  drm/radeon: remove some buggy dead code
  drm/i915: Ignore VBT backlight check on Macbook 2, 1
  drm/radeon: remove invalid pci id
  drm/radeon: dpm fixes for asrock systems
  radeon: clean up coding style differences in radeon_get_bios()
  drm/radeon: Use drm_malloc_ab instead of kmalloc_array
  drm/radeon/dpm: disable ulv support on SI
  drm/i915: Fix GMBUSFREQ on vlv/chv
  drm/i915: Ignore long hpds on eDP ports
  ...

Pull ARM fixes from Russell King:
 - add the new bpf syscall to ARM.
 - drop a redundant return statement in __iommu_alloc_remap()
 - fix a performance issue noticed by Thomas Petazzoni with
   kmap_atomic().
 - fix an issue with the L2 cache OF parsing code which caused it to
   incorrectly print warnings on each boot, and make the warning text
   more consistent with the rest of the code

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn()
  ARM: 8183/1: l2c: Improve l2c310_of_parse() error message
  ARM: 8181/1: Drop extra return statement
  ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int'
  ARM: enable bpf syscall

Pull kvm fixes from Paolo Bonzini:
 "A small set of x86 fixes.  The most serious is an SRCU lockdep fix.

  A bit late - needed some time to test the SRCU fix, which only came in
  on Friday"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: defer load of APIC access page address during reset
  KVM: nVMX: Disable preemption while reading from shadow VMCS
  KVM: x86: Fix far-jump to non-canonical check
  KVM: emulator: fix execution close to the segment limit
  KVM: emulator: fix error code for __linearize

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

This pull-request includes some bug fixes and code cleanups.
Especially, this fixes the bind failure issue occurred when it tries
to re-bind Exynos drm driver after unbound, and the modetest failure
issue incurred by not having a pair to vblank on and off requests.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs

Pull VFS fixes from Al Viro:
 "A bunch of assorted fixes, most of them followups to overlayfs merge"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ovl: initialize ->is_cursor
  Return short read or 0 at end of a raw device, not EIO
  isofs: don't bother with ->d_op for normal case
  isofs_cmp(): we'll never see a dentry for . or ..
  overlayfs: fix lockdep misannotation
  ovl: fix check for cursor
  overlayfs: barriers for opening upper-layer directory
  rcu: Provide counterpart to rcu_dereference() for non-RCU situations
  staging: android: logger: Fix log corruption regression

The sk_prot is irda's own set of protocol handlers, so irda should
statically know what that function is anyway, without using an indirect
pointer.  And as it happens, we know *exactly* what that pointer is
statically: it's NULL, because irda doesn't define a disconnect
operation.

So calling that function is doubly wrong, and will just cause an oops.
Reported-by: NMartin Lang <mlg.hessigheim@gmail.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During system suspend after connector switch off its dpms field
is set to connector previous dpms state. To properly resume dpms field
should be set to its actual state (off) before resuming to previous dpms state.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Before DPMS off driver disables vblank.
It should be balanced by vblank enable after DPMS on.
The patch fixes issue with page_flip ioctl not being able
to acquire vblank counter introduced by patch:
drm: Always reject drm_vblank_get() after drm_vblank_off()
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

HPD events can be generated by components even if drm_dev is not fully
initialized, to skip such events kms poll initialization should
be performed at the end of load callback followed directly by forced
connection detection.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>