Implement mem_cgroup_css_from_page() which returns the
cgroup_subsys_state of the memcg associated with a given page on the
default hierarchy.  This will be used by cgroup writeback support.

This function assumes that page->mem_cgroup association doesn't change
until the page is released, which is true on the default hierarchy as
long as replace_page_cache_page() is not used.  As the only user of
replace_page_cache_page() is FUSE which won't support cgroup writeback
for the time being, this works for now, and replace_page_cache_page()
will soon be updated so that the invariant actually holds.

Note that the RCU protected page->mem_cgroup access is consistent with
other usages across memcg but ultimately incorrect.  These unlocked
accesses are missing required barriers.  page->mem_cgroup should be
made an RCU pointer and updated and accessed using RCU operations.

v4: Instead of triggering WARN, return the root css on the traditional
    hierarchies.  This makes the function a lot easier to deal with
    especially as there's no light way to synchronize against
    hierarchy rebinding.

v3: s/mem_cgroup_migrate()/mem_cgroup_css_from_page()/

v2: Trigger WARN if the function is used on the traditional
    hierarchies and add comment about the assumed invariant.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bio can only be associated with the io_context and blkcg
of %current using bio_associate_current().  This is too restrictive
for cgroup writeback support.  Implement bio_associate_blkcg() which
associates a bio with the specified blkcg.

bio_associate_blkcg() leaves the io_context unassociated.
bio_associate_current() is updated so that it considers a bio as
already associated if it has a blkcg_css, instead of an io_context,
associated with it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Implement a wrapper around task_get_css() to acquire the blkcg css for
a given task.  The wrapper is necessary for cgroup writeback support
as there will be places outside blkcg proper trying to acquire
blkcg_css and blkio_cgrp_id will be undefined when !CONFIG_BLK_CGROUP.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

bio_associate_current() currently open codes task_css() and
css_tryget_online() to find and pin $current's blkcg css.  Abstract it
into task_get_css() which is implemented from cgroup side.  As a task
is always associated with an online css for every subsystem except
while the css_set update is propagating, task_get_css() retries till
css_tryget_online() succeeds.

This is a cleanup and shouldn't lead to noticeable behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add global constant blkcg_root_css which points to &blkcg_root.css.
This will be used by cgroup writeback support.  If blkcg is disabled,
it's defined as ERR_PTR(-EINVAL).

v2: The declarations moved to include/linux/blk-cgroup.h as suggested
    by Vivek.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add global mem_cgroup_root_css which points to the root memcg css.
This will be used by cgroup writeback support.  If memcg is disabled,
it's defined as ERR_PTR(-EINVAL).
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
aCc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, blkcg does a minor optimization where the root blkcg is
created when the first blkcg policy is activated on a queue and
destroyed on the deactivation of the last.  On systems where blkcg is
configured but not used, this saves one blkcg_gq struct per queue.  On
systems where blkcg is actually used, there's no difference.  The only
case where this can lead to any meaninful, albeit still minute, save
in memory consumption is when all blkcg policies are deactivated after
being widely used in the system, which is a hihgly unlikely scenario.

The conditional existence of root blkcg_gq has already created several
bugs in blkcg and became an issue once again for the new per-cgroup
wb_congested mechanism for cgroup writeback support leading to a NULL
dereference when no blkcg policy is active.  This is really not worth
bothering with.  This patch makes blkcg always allocate and link the
root blkcg_gq and release it only on queue destruction.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The header file will be used more widely with the pending cgroup
writeback support and the current set of dummy declarations aren't
enough to handle different config combinations.  Update as follows.

* Drop the struct cgroup declaration.  None of the dummy defs need it.

* Define blkcg as an empty struct instead of just declaring it.

* Wrap dummy function defs in CONFIG_BLOCK.  Some functions use block
  data types and none of them are to be used w/o block enabled.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup aware writeback support will require exposing some of blkcg
details.  In preprataion, move block/blk-cgroup.h to
include/linux/blk-cgroup.h.  This patch is pure file move.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When modifying PG_Dirty on cached file pages, update the new
MEM_CGROUP_STAT_DIRTY counter.  This is done in the same places where
global NR_FILE_DIRTY is managed.  The new memcg stat is visible in the
per memcg memory.stat cgroupfs file.  The most recent past attempt at
this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632

The new accounting supports future efforts to add per cgroup dirty
page throttling and writeback.  It also helps an administrator break
down a container's memory usage and provides evidence to understand
memcg oom kills (the new dirty count is included in memcg oom kill
messages).

The ability to move page accounting between memcg
(memory.move_charge_at_immigrate) makes this accounting more
complicated than the global counter.  The existing
mem_cgroup_{begin,end}_page_stat() lock is used to serialize move
accounting with stat updates.
Typical update operation:
	memcg = mem_cgroup_begin_page_stat(page)
	if (TestSetPageDirty()) {
		[...]
		mem_cgroup_update_page_stat(memcg)
	}
	mem_cgroup_end_page_stat(memcg)

Summary of mem_cgroup_end_page_stat() overhead:
- Without CONFIG_MEMCG it's a no-op
- With CONFIG_MEMCG and no inter memcg task movement, it's just
  rcu_read_lock()
- With CONFIG_MEMCG and inter memcg  task movement, it's
  rcu_read_lock() + spin_lock_irqsave()

A memcg parameter is added to several routines because their callers
now grab mem_cgroup_begin_page_stat() which returns the memcg later
needed by for mem_cgroup_update_page_stat().

Because mem_cgroup_begin_page_stat() may disable interrupts, some
adjustments are needed:
- move __mark_inode_dirty() from __set_page_dirty() to its caller.
  __mark_inode_dirty() locking does not want interrupts disabled.
- use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in
  __delete_from_page_cache(), replace_page_cache_page(),
  invalidate_complete_page2(), and __remove_mapping().

   text    data     bss      dec    hex filename
8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before
8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after
                            +192 text bytes
8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before
8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after
                            +773 text bytes

Performance tests run on v4.0-rc1-36-g4f671fe2.  Lower is better for
all metrics, they're all wall clock or cycle counts.  The read and write
fault benchmarks just measure fault time, they do not include I/O time.

* CONFIG_MEMCG not set:
                            baseline                              patched
  kbuild                 1m25.030000(+-0.088% 3 samples)       1m25.426667(+-0.120% 3 samples)
  dd write 100 MiB          0.859211561 +-15.10%                  0.874162885 +-15.03%
  dd write 200 MiB          1.670653105 +-17.87%                  1.669384764 +-11.99%
  dd write 1000 MiB         8.434691190 +-14.15%                  8.474733215 +-14.77%
  read fault cycles       254.0(+-0.000% 10 samples)            253.0(+-0.000% 10 samples)
  write fault cycles     2021.2(+-3.070% 10 samples)           1984.5(+-1.036% 10 samples)

* CONFIG_MEMCG=y root_memcg:
                            baseline                              patched
  kbuild                 1m25.716667(+-0.105% 3 samples)       1m25.686667(+-0.153% 3 samples)
  dd write 100 MiB          0.855650830 +-14.90%                  0.887557919 +-14.90%
  dd write 200 MiB          1.688322953 +-12.72%                  1.667682724 +-13.33%
  dd write 1000 MiB         8.418601605 +-14.30%                  8.673532299 +-15.00%
  read fault cycles       266.0(+-0.000% 10 samples)            266.0(+-0.000% 10 samples)
  write fault cycles     2051.7(+-1.349% 10 samples)           2049.6(+-1.686% 10 samples)

* CONFIG_MEMCG=y non-root_memcg:
                            baseline                              patched
  kbuild                 1m26.120000(+-0.273% 3 samples)       1m25.763333(+-0.127% 3 samples)
  dd write 100 MiB          0.861723964 +-15.25%                  0.818129350 +-14.82%
  dd write 200 MiB          1.669887569 +-13.30%                  1.698645885 +-13.27%
  dd write 1000 MiB         8.383191730 +-14.65%                  8.351742280 +-14.52%
  read fault cycles       265.7(+-0.172% 10 samples)            267.0(+-0.000% 10 samples)
  write fault cycles     2070.6(+-1.512% 10 samples)           2084.4(+-2.148% 10 samples)

As expected anon page faults are not affected by this patch.

tj: Updated to apply on top of the recent cancel_dirty_page() changes.
Signed-off-by: NSha Zhengju <handai.szj@gmail.com>
Signed-off-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

cancel_dirty_page() had some issues and b9ea2515 ("page_writeback:
clean up mess around cancel_dirty_page()") replaced it with
account_page_cleaned() which makes the caller responsible for clearing
the dirty bit; unfortunately, the planned changes for cgroup writeback
support requires synchronization between dirty bit manipulation and
stat updates.  While we can open-code such synchronization in each
account_page_cleaned() callsite, that's gonna be unnecessarily awkward
and verbose.

This patch revives cancel_dirty_page() but in a more restricted form.
All it does is TestClearPageDirty() followed by account_page_cleaned()
invocation if the page was dirty.  This helper covers all
account_page_cleaned() usages except for __delete_from_page_cache()
which is a special case anyway and left alone.  As this leaves no
module user for account_page_cleaned(), EXPORT_SYMBOL() is dropped
from it.

This patch just revives cancel_dirty_page() as a trivial wrapper to
replace equivalent usages and doesn't introduce any functional
changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NJens Axboe <axboe@fb.com>

Storage controllers may expose multiple block devices that share hardware
resources managed by blk-mq. This patch enhances the shared tags so a
low-level driver can access the shared resources not tied to the unshared
h/w contexts. This way the LLD can dynamically add and delete disks and
request queues without having to track all the request_queue hctx's to
iterate outstanding tags.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We don't need to honor chunk sizes for IO that doesn't carry any
data.
Signed-off-by: NJens Axboe <axboe@fb.com>

We can safely merge anything that wont generate an SG list entry,
so if the bio is data-less (discard), don't look at potential
SG gaps.
Signed-off-by: NJens Axboe <axboe@fb.com>

Remove unneeded variable used to store return value.

Generated by: scripts/coccinelle/misc/returnvar.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.

This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence.  With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.

I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for
non-chains") regressed all existing callers that followed this pattern:
 1) saving a bio's original bi_end_io
 2) wiring up an intermediate bi_end_io
 3) restoring the original bi_end_io from intermediate bi_end_io
 4) calling bio_endio() to execute the restored original bi_end_io

The regression was due to BIO_CHAIN only ever getting set if
bio_inc_remaining() is called.  For the above pattern it isn't set until
step 3 above (step 2 would've needed to establish BIO_CHAIN).  As such
the first bio_endio(), in step 2 above, never decremented __bi_remaining
before calling the intermediate bi_end_io -- leaving __bi_remaining with
the value 1 instead of 0.  When bio_inc_remaining() occurred during step
3 it brought it to a value of 2.  When the second bio_endio() was
called, in step 4 above, it should've called the original bi_end_io but
it didn't because there was an extra reference that wasn't dropped (due
to atomic operations being optimized away since BIO_CHAIN wasn't set
upfront).

Fix this issue by removing the __bi_remaining management complexity for
all callers that use the above pattern -- bio_chain() is the only
interface that _needs_ to be concerned with __bi_remaining.  For the
above pattern callers just expect the bi_end_io they set to get called!
Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls
that aren't associated with the bio_chain() interface.

Also, the bio_inc_remaining() interface has been moved local to bio.c.

Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains")
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The only possible problem of using mutex_lock() instead of trylock
is about deadlock.

If there aren't any locks held before calling blkdev_reread_part(),
deadlock can't be caused by this conversion.

If there are locks held before calling blkdev_reread_part(),
and if these locks arn't required in open, close handler and I/O
path, deadlock shouldn't be caused too.

Both user space's ioctl(BLKRRPART) and md_setup_drive() from
init/do_mounts_md.c belongs to the 1st case, so the conversion is safe
for the two cases.

For loop, the previous patches in this pathset has fixed the ABBA lock
dependency, so the conversion is OK.

For nbd, tx_lock is held when calling the function:

	- both open and release won't hold the lock
	- when blkdev_reread_part() is run, I/O thread has been stopped
	already, so tx_lock won't be acquired in I/O path at that time.
	- so the conversion won't cause deadlock for nbd

For dasd, both dasd_open(), dasd_release() and request function don't
acquire any mutex/semphone, so the conversion should be safe.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch exports blkdev_reread_part() for block drivers, also
introduce __blkdev_reread_part().

For some drivers, such as loop, reread of partitions can be run
from the release path, and bd_mutex may already be held prior to
calling ioctl_by_bdev(bdev, BLKRRPART, 0), so introduce
__blkdev_reread_part for use in such cases.

CC: Christoph Hellwig <hch@lst.de>
CC: Jens Axboe <axboe@kernel.dk>
CC: Tejun Heo <tj@kernel.org>
CC: Alexander Viro <viro@zeniv.linux.org.uk>
CC: Markus Pargmann <mpa@pengutronix.de>
CC: Stefan Weinhuber <wein@de.ibm.com>
CC: Stefan Haberland <stefan.haberland@de.ibm.com>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
CC: Fabian Frederick <fabf@skynet.be>
CC: Ming Lei <ming.lei@canonical.com>
CC: David Herrmann <dh.herrmann@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: nbd-general@lists.sourceforge.net
CC: linux-s390@vger.kernel.org
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Stop abusing struct page functionality and the swap end_io handler, and
instead add a modified version of the blk-lib.c bio_batch helpers.

Also move the block I/O code into swap.c as they are directly tied into
each other.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Tested-by: NMing Lin <mlin@kernel.org>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NRafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: NJens Axboe <axboe@fb.com>

Various previous patches removed bits and left holes, collapse them
all. Leave the reset start bit where it is, we don't need to change
that.
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since the big barrier rewrite/removal in 2007 we never fail FLUSH or
FUA requests, which means we can remove the magic BIO_EOPNOTSUPP flag
to help propagating those to the buffer_head layer.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

lockdep gets unhappy about the not disabling irqs when using the queue_lock
around it.  Instead of trying to fix that up just switch to an atomic_t
and get rid of the lock.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Last patch makes plug work for multiple queue case. However it only
works for single disk case, because it assumes only one request in the
plug list. If a task is accessing multiple disks, eg MD/DM, the
assumption is wrong. Let blk_attempt_plug_merge() record request from
the same queue.

V2: use NULL parameter in !mq case. Fix a bug. Add comments in
blk_attempt_plug_merge to make it less (hopefully) confusion.

Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

plug is still helpful for workload with IO merge, but it can be harmful
otherwise especially with multiple hardware queues, as there is
(supposed) no lock contention in this case and plug can introduce
latency. For multiple queues, we do limited plug, eg plug only if there
is request merge. If a request doesn't have merge with following
request, the requet will be dispatched immediately.

V2: check blk_queue_nomerges() as suggested by Jeff.

Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If we directly issue a request and it fails, we use
blk_mq_merge_queue_io(). But we already assigned bio to a request in
blk_mq_bio_to_request. blk_mq_merge_queue_io shouldn't run
blk_mq_bio_to_request again.
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The following appears in blk_sq_make_request:

	/*
	 * If we have multiple hardware queues, just go directly to
	 * one of those for sync IO.
	 */

We clearly don't have multiple hardware queues, here!  This comment was
introduced with this commit 07068d5b (blk-mq: split make request
handler for multi and single queue):

    We want slightly different behavior from them:

    - On single queue devices, we currently use the per-process plug
      for deferred IO and for merging.

    - On multi queue devices, we don't use the per-process plug, but
      we want to go straight to hardware for SYNC IO.

The old code had this:

        use_plug = !is_flush_fua && ((q->nr_hw_queues == 1) || !is_sync);

and that was converted to:

	use_plug = !is_flush_fua && !is_sync;

which is not equivalent.  For the single queue case, that second half of
the && expression is always true.  So, what I think was actually inteded
follows (and this more closely matches what is done in blk_queue_bio).

V2: delete the 'likely', which should not be a big deal
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

block plug callback could sleep, so we introduce a parameter
'from_schedule' and corresponding drivers can use it to destinguish a
schedule plug flush or a plug finish. Unfortunately io_schedule_out
still uses blk_flush_plug(). This causes below output (Note, I added a
might_sleep() in raid1_unplug to make it trigger faster, but the whole
thing doesn't matter if I add might_sleep). In raid1/10, this can cause
deadlock.

This patch makes io_schedule_out always uses blk_schedule_flush_plug.
This should only impact drivers (as far as I know, raid 1/10) which are
sensitive to the 'from_schedule' parameter.

[  370.817949] ------------[ cut here ]------------
[  370.817960] WARNING: CPU: 7 PID: 145 at ../kernel/sched/core.c:7306 __might_sleep+0x7f/0x90()
[  370.817969] do not call blocking ops when !TASK_RUNNING; state=2 set at [<ffffffff81092fcf>] prepare_to_wait+0x2f/0x90
[  370.817971] Modules linked in: raid1
[  370.817976] CPU: 7 PID: 145 Comm: kworker/u16:9 Tainted: G        W       4.0.0+ #361
[  370.817977] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014
[  370.817983] Workqueue: writeback bdi_writeback_workfn (flush-9:1)
[  370.817985]  ffffffff81cd83be ffff8800ba8cb298 ffffffff819dd7af 0000000000000001
[  370.817988]  ffff8800ba8cb2e8 ffff8800ba8cb2d8 ffffffff81051afc ffff8800ba8cb2c8
[  370.817990]  ffffffffa00061a8 000000000000041e 0000000000000000 ffff8800ba8cba28
[  370.817993] Call Trace:
[  370.817999]  [<ffffffff819dd7af>] dump_stack+0x4f/0x7b
[  370.818002]  [<ffffffff81051afc>] warn_slowpath_common+0x8c/0xd0
[  370.818004]  [<ffffffff81051b86>] warn_slowpath_fmt+0x46/0x50
[  370.818006]  [<ffffffff81092fcf>] ? prepare_to_wait+0x2f/0x90
[  370.818008]  [<ffffffff81092fcf>] ? prepare_to_wait+0x2f/0x90
[  370.818010]  [<ffffffff810776ef>] __might_sleep+0x7f/0x90
[  370.818014]  [<ffffffffa0000c03>] raid1_unplug+0xd3/0x170 [raid1]
[  370.818024]  [<ffffffff81421d9a>] blk_flush_plug_list+0x8a/0x1e0
[  370.818028]  [<ffffffff819e3550>] ? bit_wait+0x50/0x50
[  370.818031]  [<ffffffff819e21b0>] io_schedule_timeout+0x130/0x140
[  370.818033]  [<ffffffff819e3586>] bit_wait_io+0x36/0x50
[  370.818034]  [<ffffffff819e31b5>] __wait_on_bit+0x65/0x90
[  370.818041]  [<ffffffff8125b67c>] ? ext4_read_block_bitmap_nowait+0xbc/0x630
[  370.818043]  [<ffffffff819e3550>] ? bit_wait+0x50/0x50
[  370.818045]  [<ffffffff819e3302>] out_of_line_wait_on_bit+0x72/0x80
[  370.818047]  [<ffffffff810935e0>] ? autoremove_wake_function+0x40/0x40
[  370.818050]  [<ffffffff811de744>] __wait_on_buffer+0x44/0x50
[  370.818053]  [<ffffffff8125ae80>] ext4_wait_block_bitmap+0xe0/0xf0
[  370.818058]  [<ffffffff812975d6>] ext4_mb_init_cache+0x206/0x790
[  370.818062]  [<ffffffff8114bc6c>] ? lru_cache_add+0x1c/0x50
[  370.818064]  [<ffffffff81297c7e>] ext4_mb_init_group+0x11e/0x200
[  370.818066]  [<ffffffff81298231>] ext4_mb_load_buddy+0x341/0x360
[  370.818068]  [<ffffffff8129a1a3>] ext4_mb_find_by_goal+0x93/0x2f0
[  370.818070]  [<ffffffff81295b54>] ? ext4_mb_normalize_request+0x1e4/0x5b0
[  370.818072]  [<ffffffff8129ab67>] ext4_mb_regular_allocator+0x67/0x460
[  370.818074]  [<ffffffff81295b54>] ? ext4_mb_normalize_request+0x1e4/0x5b0
[  370.818076]  [<ffffffff8129ca4b>] ext4_mb_new_blocks+0x4cb/0x620
[  370.818079]  [<ffffffff81290956>] ext4_ext_map_blocks+0x4c6/0x14d0
[  370.818081]  [<ffffffff812a4d4e>] ? ext4_es_lookup_extent+0x4e/0x290
[  370.818085]  [<ffffffff8126399d>] ext4_map_blocks+0x14d/0x4f0
[  370.818088]  [<ffffffff81266fbd>] ext4_writepages+0x76d/0xe50
[  370.818094]  [<ffffffff81149691>] do_writepages+0x21/0x50
[  370.818097]  [<ffffffff811d5c00>] __writeback_single_inode+0x60/0x490
[  370.818099]  [<ffffffff811d630a>] writeback_sb_inodes+0x2da/0x590
[  370.818103]  [<ffffffff811abf4b>] ? trylock_super+0x1b/0x50
[  370.818105]  [<ffffffff811abf4b>] ? trylock_super+0x1b/0x50
[  370.818107]  [<ffffffff811d665f>] __writeback_inodes_wb+0x9f/0xd0
[  370.818109]  [<ffffffff811d69db>] wb_writeback+0x34b/0x3c0
[  370.818111]  [<ffffffff811d70df>] bdi_writeback_workfn+0x23f/0x550
[  370.818116]  [<ffffffff8106bbd8>] process_one_work+0x1c8/0x570
[  370.818117]  [<ffffffff8106bb5b>] ? process_one_work+0x14b/0x570
[  370.818119]  [<ffffffff8106c09b>] worker_thread+0x11b/0x470
[  370.818121]  [<ffffffff8106bf80>] ? process_one_work+0x570/0x570
[  370.818124]  [<ffffffff81071868>] kthread+0xf8/0x110
[  370.818126]  [<ffffffff81071770>] ? kthread_create_on_node+0x210/0x210
[  370.818129]  [<ffffffff819e9322>] ret_from_fork+0x42/0x70
[  370.818131]  [<ffffffff81071770>] ? kthread_create_on_node+0x210/0x210
[  370.818132] ---[ end trace 7b4deb71e68b6605 ]---

V2: don't change ->in_iowait

Cc: NeilBrown <neilb@suse.de>
Signed-off-by: NShaohua Li <shli@fb.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Current code looks like inner plug gets flushed with a
blk_finish_plug(). Actually it's a nop. All requests/callbacks are added
to current->plug, while only outmost plug is assigned to current->plug.
So inner plug always has empty request/callback list, which makes
blk_flush_plug_list() a nop. This tries to make the code more clear.
Signed-off-by: NShaohua Li <shli@fb.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

This removes the request types and hacks from the block code and into the
old IDE driver.  There is a small amunt of code duplication due to this,
but it's not too bad.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

These values are only used by the IDE driver, so move them into it
by allowing drivers to take cmd_type values after the first private
one.  Note that we have to turn cmd_type into a plain unsigned integer
so that gcc doesn't complain about mismatching enum types.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Struct bio has a reference count that controls when it can be freed.
Most uses cases is allocating the bio, which then returns with a
single reference to it, doing IO, and then dropping that single
reference. We can remove this atomic_dec_and_test() in the completion
path, if nobody else is holding a reference to the bio.

If someone does call bio_get() on the bio, then we flag the bio as
now having valid count and that we must properly honor the reference
count when it's being put.
Tested-by: NRobert Elliott <elliott@hp.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Struct bio has an atomic ref count for chained bio's, and we use this
to know when to end IO on the bio. However, most bio's are not chained,
so we don't need to always introduce this atomic operation as part of
ending IO.

Add a helper to elevate the bi_remaining count, and flag the bio as
now actually needing the decrement at end_io time. Rename the field
to __bi_remaining to catch any current users of this doing the
incrementing manually.

For high IOPS workloads, this reduces the overhead of bio_endio()
substantially.
Tested-by: NRobert Elliott <elliott@hp.com>
Acked-by: NKent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Pull crypto fixes from Herbert Xu:
 "This fixes a build problem with bcm63xx and yet another fix to the
  memzero_explicit function to ensure that the memset is not elided"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: bcm63xx - Fix driver compilation
  lib: make memzero_explicit more robust against dead store elimination

Pull media fixes from Mauro Carvalho Chehab:
 "Three driver fixes:

   - fix for omap4, fixing a regression due to a subsystem API that got
     removed for 4.1 (commit efde2346);

   - fix for one of the formats supported by Marvel ccic driver;

   - fix rcar_vin driver that, when stopping abnormally, the driver
     can't return from wait_for_completion"

* tag 'media/v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: omap4iss: Replace outdated OMAP4 control pad API with syscon
  [media] media: soc_camera: rcar_vin: Fix wait_for_completion
  [media] marvell-ccic: fix Y'CbCr ordering