do_div() requires that the first parameter is a 64-bit integer,
which but clkrate was defined as an unsigned long.  This caused
the following warnings:

 CC      sound/soc/fsl/fsl_ssi.o
sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_set_bclk':
sound/soc/fsl/fsl_ssi.c:593:3: warning: comparison of distinct pointer types lacks a cast
sound/soc/fsl/fsl_ssi.c:593:3: warning: right shift count >= width of type
sound/soc/fsl/fsl_ssi.c:593:3: warning: passing argument 1 of '__div64_32' from incompatible pointer type
include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but argument is of type 'long unsigned int *'
Signed-off-by: NTimur Tabi <timur@tabi.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

Commit 43248122 (ASoC: fsl-ssi: Use regmap) removed struct ccsr_ssi.
Unfortunately, the structure is still used. This causes
mpc85xx_smp_defconfig and mpc85xx_defconfig builds to fail with

sound/soc/fsl/fsl_dma.c:926:50:
  error: invalid use of undefined type 'struct ccsr_ssi'
  dma->ssi_stx_phys = res.start + offsetof(struct ccsr_ssi, stx0);
ound/soc/fsl/fsl_dma.c:927:50:
  error: invalid use of undefined type 'struct ccsr_ssi'
  dma->ssi_srx_phys = res.start + offsetof(struct ccsr_ssi, srx0);

Fix by using constants, similar to original commit.

Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMark Brown <broonie@linaro.org>

This is the same change as commit fb6b8e71 "ASoC: tegra: free jack
GPIOs before the sound card is freed", but applied to all other ASoC
machine drivers where code inspection indicates the same problem exists.

That commit's description is:
==========
snd_soc_jack_add_gpios() schedules a work queue item to poll the GPIO to
generate an initial jack status report. If sound card initialization
fails, that work item needs to be cancelled, so it doesn't run after the
card has been freed. Specifically, freeing the card calls
snd_jack_dev_free() which calls snd_jack_dev_disconnect() which sets
jack->input_dev = NULL, and input_dev is used by snd_jack_report(), which
is called from the work queue item.

snd_soc_jack_free_gpios() cancels the work item. The Tegra ASoC machine
drivers do call this function in the platform driver remove() callback.
However, this happens after the sound card is freed, at least when the
card is freed due to errors late during snd_soc_instantiate_card(). This
leaves a window where the work item can execute after the card is freed.
In next-20140522, sound card initialization does fail for unrelated
reasons, and hits the problem described above.

To solve this, fix the Tegra ASoC machine drivers to clean up the Jack
GPIOs during the snd_soc_card's .remove() callback, which is executed
before the overall card object is freed. also, guard the cleanup call
based on whether we actually setup up the GPIOs in the first place.
Ideally, we'd do the cleanup in a struct snd_soc_dai_link .fini/remove
function to match where the GPIOs get set up. However, there is no such
callback.
==========

Note that I have not even compile-tested this in most cases, since most
of the drivers rely on specific mach-* support I don't have enabled, and
don't support COMPILE_TEST. Testing by the relevant board maintainers
would be useful.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/simple' and 'asoc/topic/sirf' into asoc-next

It is not an error to have no cache so we shouldn't return an error code
and cause our callers to fail, just silently do nothing instead.  Thanks
to Jarkko for identify the problematic commit.
Reported-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds the Realtek ALC5677 codec driver.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Signed-off-by: NMark Brown <broonie@linaro.org>

The patch adds the function "get_clk_info" to RL6231 shared support.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The patch adds the function of the PLL clock calculation to RL6231 shared
support.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The patch adds the RL6231 class device shared support for RT5640, RT5645 and
RT5651. The function of the DMIC clock calculation can be shared by RL6231
shared support.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Merge branches 'topic/rt5640', 'topic/rt5645' and 'topic/rt5651' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rl6231

Since we cannot make sure the 'reg_size' will always be none zero here,
and then if 'reg_size' equals to zero, the kzalloc() will return ZERO_SIZE_PTR,
which equals to ((void *)16).

So this patch fix this with just doing the 'reg_size' zero check before calling
kzalloc().
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This is useful if we have a pointer to a DAPM context and know that it is a
CODEC or platform DAPM context and want to get a pointer to the CODEC or
platform.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Merge branch 'topic/fsl' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl-ssi

Conflicts:
	sound/soc/fsl/Kconfig

The mono output PGA input only has four possible sources, so
omit the rest.
Signed-off-by: NMatt Reimer <mreimer@sdgsystems.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Eukrea-i.MX51 board was converted to use DT, ie we no longer have a
MACH_EUKREA_MBIMXSD51_BASEBOARD symbol.
Transformation of other boards planned for the near future, so this
patch removes all these dependencies and restricts build of this
driver to ARCH_MXC.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch replaces the ssi specific functions write_ssi, read_ssi and
write_ssi_mask by standard regmap function calls.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Reorder all variables in struct fsl_ssi_private to have groups that make
sense together. The patch also updates the struct documentation.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The baudclock may be used and set by different streams.

Allow only the first stream to set the bitclock rate. Other streams have
to try to get to the correct rate without modifying the bitclock rate
using the SSI internal clock modifiers.

The variable baudclk_streams is introduced to keep track of the active
streams that are using the baudclock. This way we know if the baudclock
may be set and whether we may enable/disable the clock.

baudclock enable/disable is moved to hw_params()/hw_free(). This way we can
keep track of the baudclock in those two functions and avoid a running
clock while it is not used. As hw_params()/hw_free() may be called
multiple times for the same stream, we have to use baudclk_streams
variable to know whether we may enable/disable the clock.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

In i2s master mode the fsl_ssi driver depends on someone calling
.set_tdm_slot correctly. In this mode though only a DC value of
2 is allowed, so set it in this case and no longer depend on
.set_tdm_slot.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The baudclock_locked variable is only used in functions which
are serialized anyway from the core. No need to have a lock
around the variable, so remove it.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The fsl_ssi driver uses the .set_sysclk callback to configure the
bitclock for master mode. This is unnecessary since the bitclock
is known in hw_params. This patch configures the bitclock from .hw_params.
.set_dai_sysclk now sets a bitclock frequency which is preferred over
the default calculated bitclock frequency.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The simple soundcard binding has its own way for specifying the dai
format. To be able to use this binding we have to make the fsl,mode
property optional. As the property is used in existing devicetrees
keep the option around for compatibility reasons.
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Introduce a SoC data struct which contains the differences between
the different SoCs this driver supports. This makes it easy to support
more differences without having to introduce a new switch/case each
time.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
Tested-By: NMichael Grzeschik <mgr@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

Use card PM ops from ASoC core instead of defining custom PM ops here since
we are calling anyway common suspend/resume callbacks.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Simplify byt-rt5640.c and haswell.c machine drivers by using
devm_snd_soc_register_card(). Remove also needless dev_set_drvdata()
from byt_rt5640_probe() since snd_soc_register_card() does it too.
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

A few files contain duplicate headers. This patch removes the second entry of
duplicate in each file under question.

There is no functional changes.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@linaro.org>