Make sure that for Ethernet ports, the port GID table index 0 is always
occupied with a default GID of the relevant IPv6 link-local adderss.

This provides better user experience for legacy applications that don't use
the RDMA CM and were working on index 0 prior to the IP addressing change.

Also, as GIDs are generated from IP addresses of the network devices that
are associated with the port, it's basically possible that the GID table
will be empty if no IP address was assigned.  This doesn't comply with the
IB spec section 4.1.1 "GID usage and properties".
Signed-off-by: NMoni Shoua <monis@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When the device has only Ethernet ports, don't try to allocate range
of steerable UD QPs since they aren't needed.  This fixes an issue
where mlx4 VFs tried to allocate a range of UD steerable QPs, but
failed to do so.

Fixes: c1c98501 ("IB/mlx4: Add support for steerable IB UD QPs")
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

...instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Currently, the mlx4 driver set IBoE (RoCE) gids to encode related
Ethernet netdevice interface MAC address and possibly VLAN id.

Change this scheme such that gids encode interface IP addresses (both
IP4 and IPv6).

This requires learning the IP addresses which are of use by a
netdevice associated with the HCA port, formatting them to gids and
adding them to the port gid table.  Furthermore, events of add and
delete address are caught to maintain the gid table accordingly.

Associated IP addresses may belong to a master of an Ethernet
netdevice on top of that port so this should be considered when
building and maintaining the gid table.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch adds support for steerable (NETIF) QP creation.  When we
create the device, we allocate a range of steerable QPs.

Afterward when a QP is created with the NETIF flag, it's allocated
from this range.  Allocation is managed by bitmap allocator.

Internal steering rules for those QPs is automatically generated on
their creation.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The mlx4 device requires adding IB flow spec to rules that apply over
infiniband link layer.  This patch adds a mechanism to add such a rule.

If higher levels e.g. IP/UDP/TCP flow specs are provided, the device
requires us to add an empty wild-carded IB rule. Furthermore, the device
requires the QPN to be put in the rule.

Add here specific parsing support for IB empty rules and the ability
to self-generate missing specs based on existing ones.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Up until now, flow steering wasn't supported when using IB ports.

This patch enables support for flow steering if all hardware ports
support that, for example the new MLX4_DEV_CAP_FLAG2_DMFS_IPOIB mlx4
device capability.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This commit reverts commit 7afbddfa ("IB/core: Temporarily disable
create_flow/destroy_flow uverbs").  Since the uverbs extensions
functionality was experimental for v3.12, this patch re-enables the
support for them and flow-steering for v3.13.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit 400dbc96 ("IB/core: Infrastructure for extensible uverbs
commands") added an infrastructure for extensible uverbs commands
while later commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow
through uverbs") exported ib_create_flow()/ib_destroy_flow() functions
using this new infrastructure.

According to the commit 400dbc96, the purpose of this
infrastructure is to support passing around provider (eg. hardware)
specific buffers when userspace issue commands to the kernel, so that
it would be possible to extend uverbs (eg. core) buffers independently
from the provider buffers.

But the new kernel command function prototypes were not modified to
take advantage of this extension. This issue was exposed by Roland
Dreier in a previous review[1].

So the following patch is an attempt to a revised extensible command
infrastructure.

This improved extensible command infrastructure distinguish between
core (eg. legacy)'s command/response buffers from provider
(eg. hardware)'s command/response buffers: each extended command
implementing function is given a struct ib_udata to hold core
(eg. uverbs) input and output buffers, and another struct ib_udata to
hold the hw (eg. provider) input and output buffers.

Having those buffers identified separately make it easier to increase
one buffer to support extension without having to add some code to
guess the exact size of each command/response parts: This should make
the extended functions more reliable.

Additionally, instead of relying on command identifier being greater
than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on
unused bits in command field: on the 32 bits provided by command
field, only 6 bits are really needed to encode the identifier of
commands currently supported by the kernel. (Even using only 6 bits
leaves room for about 23 new commands).

So this patch makes use of some high order bits in command field to
store flags, leaving enough room for more command identifiers than one
will ever need (eg. 256).

The new flags are used to specify if the command should be processed
as an extended one or a legacy one. While designing the new command
format, care was taken to make usage of flags itself extensible.

Using high order bits of the commands field ensure that newer
libibverbs on older kernel will properly fail when trying to call
extended commands. On the other hand, older libibverbs on newer kernel
will never be able to issue calls to extended commands.

The extended command header includes the optional response pointer so
that output buffer length and output buffer pointer are located
together in the command, allowing proper parameters checking. This
should make implementing functions easier and safer.

Additionally the extended header ensure 64bits alignment, while making
all sizes multiple of 8 bytes, extending the maximum buffer size:

                             legacy      extended

   Maximum command buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)
  Maximum response buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)

For the purpose of doing proper buffer size accounting, the headers
size are no more taken in account in "in_words".

One of the odds of the current extensible infrastructure, reading
twice the "legacy" command header, is fixed by removing the "legacy"
command header from the extended command header: they are processed as
two different parts of the command: memory is read once and
information are not duplicated: it's making clear that's an extended
command scheme and not a different command scheme.

The proposed scheme will format input (command) and output (response)
buffers this way:

- command:

  legacy header +
  extended header +
  command data (core + hw):

    +----------------------------------------+
    | flags     |   00      00    |  command |
    |        in_words    |   out_words       |
    +----------------------------------------+
    |                 response               |
    |                 response               |
    | provider_in_words | provider_out_words |
    |                 padding                |
    +----------------------------------------+
    |                                        |
    .              <uverbs input>            .
    .              (in_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .             <provider input>           .
    .          (provider_in_words * 8)       .
    |                                        |
    +----------------------------------------+

- response, if present:

    +----------------------------------------+
    |                                        |
    .          <uverbs output space>         .
    .             (out_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .         <provider output space>        .
    .         (provider_out_words * 8)       .
    |                                        |
    +----------------------------------------+

The overall design is to ensure that the extensible infrastructure is
itself extensible while begin more reliable with more input and bound
checking.

Note:

The unused field in the extended header would be perfect candidate to
hold the command "comp_mask" (eg. bit field used to handle
compatibility).  This was suggested by Roland Dreier in a previous
review[2].  But "comp_mask" field is likely to be present in the uverb
input and/or provider input, likewise for the response, as noted by
Matan Barak[3], so it doesn't make sense to put "comp_mask" in the
header.

[1]:
http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com

[2]:
http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com

[3]:
http://marc.info/?i=525C1149.6000701@mellanox.comSigned-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com

[ Convert "ret ? ret : 0" to the equivalent "ret".  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

To guarantee that all unused fields in all FW commands for both inboxes
and outboxes are zeroed out, initialize the mailbox buffer to all zeroes.

This is especially important for SRIOV comm-channel virtual commands
(such as QUERY_FUNC_CAP), where if new fields are added to support new
features, the driver can depend on older kernels passing zeroes in these
fields.

In addition to zeroing out the mailbox buffer at allocation time, all
(now unnecessary) calls to memset by the callers of
mlx4_alloc_cmd_mailbox() are removed.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is step #1 for implementing SRIOV resource quotas for VFs.

Quotas are implemented per resource type for VFs and the PF, to prevent
any entity from simply grabbing all the resources for itself and leaving
the other entities unable to obtain such resources.

Resources which are allocated using quotas:  QPs, CQs, SRQs, MPTs, MTTs, MAC,
                                             VLAN, and Counters.

The quota system works as follows:
Each entity (VF or PF) is given a max number of a given resource (its quota),
and a guaranteed minimum number for each resource (starvation prevention).

For QPs, CQs, SRQs, MPTs and MTTs:
50% of the available quantity for the resource is divided equally among
the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module
parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool.
The other 50% is the "free pool", allocated on a first-come-first-serve basis.
For each VF/PF, resources are first allocated from its "guaranteed-minimum"
pool. When that pool is exhausted, the driver attempts to allocate from
the resource "free-pool".

The quota (i.e., max) for the VFs and the PF is:
  The free-pool amount (50% of the real max) + the guaranteed minimum

For MACs:
  Guarantee 2 MACs per VF/PF per port. As a result, since we have only
  128 MACs per port, reduce the allowable number of VFs from 64 to 63.
  Any remaining MACs are put into a free pool.

For VLANs:
  For the PF, the per-port quota is 128 and guarantee is 64
     (to allow the PF to register at least a VLAN per VF in VST mode).
  For the VFs, the per-port quota is 64 and the guarantee is 0.
      We assume that VGT VFs are trusted not to abuse the VLAN resource.

For Counters:
  For all functions (PF and VFs), the quota is 128 and the guarantee is 0.

In this patch, we define the needed structures, which are added to the
resource-tracker struct.  In addition, we do initialization
for the resource quota, and adjust the query_device response to use quotas
rather than resource maxima.

As part of the implementation, we introduce a new field in
mlx4_dev: quotas.  This field holds the resource quotas used
to report maxima to the upper layers (ib_core, via query_device).

The HCA maxima of these values are passed to the VFs (via
QUERY_HCA) so that they may continue to use these in handling
QPs, CQs, SRQs and MPTs.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The create_flow/destroy_flow uverbs and the associated extensions to
the user-kernel verbs ABI are under review and are too experimental to
freeze at this point.

So userspace is not exposed to experimental features and an uinstable
ABI, temporarily disable this for v3.12 (with a Kconfig option behind
staging to reenable it if desired).

The feature will be enabled after proper cleanup for v3.13.
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1381351016.git.ydroneaud@opteya.com
Link: http://marc.info/?i=cover.1381177342.git.ydroneaud@opteya.com

[ Add a Kconfig option to reenable these verbs.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Implement ib_create_flow() and ib_destroy_flow().

Translate the verbs structures provided by the user to HW structures
and call the MLX4_QP_FLOW_STEERING_ATTACH/DETACH firmware commands.

On the ATTACH command completion, the firmware provides a 64-bit
registration ID, which is placed into struct mlx4_ib_flow that wraps
the instance of struct ib_flow which is retuned to caller.  Later,
this reg ID is used for detaching that flow from the firmware.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Indicate memory windows support through device capabilities, kernel
verb entries and the relevant uverbs command mask entries.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NShani Michaeli <shanim@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

kfree on NULL pointer is a no-op.
Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

ConnectX-3 devices can use either 64- or 32-byte completion queue
entries (CQEs) and event queue entries (EQEs).  Using 64-byte
EQEs/CQEs performs better because each entry is aligned to a complete
cacheline.  This patch queries the HCA's capabilities, and if it
supports 64-byte CQEs and EQES the driver will configure the HW to
work in 64-byte mode.

The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ.

Since this mode is global, userspace (libmlx4) must be updated to work
with the configured CQE size, and guests using SR-IOV virtual
functions need to know both EQE and CQE size.

In case one of the 64-byte CQE/EQE capabilities is activated, the
patch makes sure that older guest drivers that use the QUERY_DEV_FUNC
command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that
they need an update to be able to work with the PPF. This is done by
changing the returned pf_context_behaviour not to be zero any more. In
case none of these capabilities is activated that value remains zero
and older guest drivers can run OK.

The SRIOV related flow is as follows

1. the PPF does the detection of the new capabilities using
   QUERY_DEV_CAP command.

2. the PPF activates the new capabilities using INIT_HCA.

3. the VF detects if the PPF activated the capabilities using
   QUERY_HCA, and if this is the case activates them for itself too.

Note that the VF detects that it must be aware to the new PF behaviour
using QUERY_FUNC_CAP.  Steps 1 and 2 apply also for native mode.

User space notification is done through a new field introduced in
struct mlx4_ib_ucontext which holds device capabilities for which user
space must take action. This changes the binary interface so the ABI
towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only
when **needed** i.e. only when the driver does use 64-byte CQEs or
future device capabilities which must be in sync by user space. This
practice allows to work with unmodified libmlx4 on older devices (e.g
A0, B0) which don't support 64-byte CQEs.

In order to keep existing systems functional when they update to a
newer kernel that contains these changes in VF and userspace ABI, a
module parameter enable_64b_cqe_eqe must be set to enable 64-byte
mode; the default is currently false.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When we have VFs and PFs on same host, the VFs are activated within
the mlx4_core module before the mlx4_ib kernel module is loaded.

When the mlx4_ib module initializes the PF (master), it now creates
MAD paravirtualization contexts for any VFs that already active.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Remove the error returns for IB ports from mlx4_ib_add,
mlx4_INIT_PORT_wrapper, and mlx4_CLOSE_PORT_wrapper.

Currently, SRIOV is supported only for devices for which the
link layer is IB on all ports; RoCE support will be added later.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

1. Allow only master to change node description.
2. Prevent AH leakage in send mads.
3. Take device part number from PCI structure, so that guests see the
   VF part number (and not the PF part number).
4. Place the device revision ID into caps structure at startup.
5. SET_PORT in update_gids_task needs to go through wrapper on master.
6. In mlx4_ib_event(), PORT_MGMT_EVENT needs be handled in a work
   queue on the master, since it propagates events to slaves using
   GEN_EQE.
7. Do not support FMR on slaves.
8. Add spinlock to slave_event(), since it is called both in interrupt
   context and in process context (due to 6 above, and also if
   smp_snoop is used).  This fix was found and implemented by Saeed
   Mahameed <saeedm@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

For IB ports, we paravirtualize the GUID at index 0 on slaves.  The
GUID at index 0 seen by a slave is the actual GUID occupying the GUID
table at the slave-id index.

The driver, by default, requests at startup time that subnet manager
populate its entire guid table with GUIDs. These guids are then mapped
(paravirtualized) to the slaves, and appear for each slave as its GUID
at index 0.

Until each slave has such a guid, its port status is DOWN.

The guid table is cached to support special QP paravirtualization, and
event propagation to slaves on guid change (we test to see if the guid
really changed before propagating an event to the slave).

To support this caching, add capability to __mlx4_ib_query_gid() to
obtain the network view (i.e., physical view) gid at index X, not just
the host (paravirtualized) view.

Based on a patch from Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

MCG paravirtualization support includes:
- Creating multicast groups by VFs, and keeping accounting of them
- Leaving multicast groups by VFs
- Updating SM only with real changes in the overall picture of MCGs status
- Creation of MGID=0 groups (let SM choose MGID)

Note that the MCG module maintains its own internal MCG object
reference counts.  The reason for this is that the IB core is used to
track only the multicast groups joins generated by the PF it runs
over.  The PF IB core layer is unaware of slaves, so it cannot be used
to keep track of MCG joins they generate.
Signed-off-by: NOren Duer <oren@mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The MAD_IFC firmware command fulfills two functions.

First, it is used in the QP0/QP1 MAD-handling flow to obtain
information from the FW (for answering queries), and for setting
variables in the HCA (MAD SET packets).

For this, MAD_IFC should provide the FW (physical) view of the data.
This is the view that OpenSM needs.  We call this the "network view".

In the second case, MAD_IFC is used by various verbs to obtain data
regarding the local HCA (e.g., ib_query_device()).  We call this the
"host view".

This data needs to be paravirtualized.

MAD_IFC therefore needs a wrapper function, and also needs another
flag indicating whether it should provide the network view (when it is
called by ib_process_mad in special-qp packet handling), or the host
view (when it is called while implementing a verb).

There are currently 2 flag parameters in mlx4_MAD_IFC already:
ignore_bkey and ignore_mkey.  These two parameters are replaced by a
single "mad_ifc_flags" parameter, with different bits set for each
flag.  A third flag is added: "network-view/host-view".
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This requires:

1. Replacing the paravirtualized P_Key index (inserted by the guest)
   with the real P_Key index.

2. For UD QPs, placing the guest's true source GID index in the
   address path structure mgid field, and setting the ud_force_mgid
   bit so that the mgid is taken from the QP context and not from the
   WQE when posting sends.

3. For UC and RC QPs, placing the guest's true source GID index in the
   address path structure mgid field.

4. For tunnel and proxy QPs, setting the Q_Key value reserved for that
   proxy/tunnel pair.

Since not all the above adjustments occur in all the QP transitions,
the QP transitions require separate wrapper functions.

Secondly, initialize the P_Key virtualization table to its default
values: Master virtualized table is 1-1 with the real P_Key table,
guest virtualized table has P_Key index 0 mapped to the real P_Key
index 0, and all the other P_Key indices mapped to the reserved
(invalid) P_Key at index 127.

Finally, add logic in smp_snoop for maintaining the phys_P_Key_cache.
and generating events on the master only if a P_Key actually changed.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Allocate SR-IOV paravirtualization resources and MAD demuxing contexts
on the master.

This has two parts.  The first part is to initialize the structures to
contain the contexts.  This is done at master startup time in
mlx4_ib_init_sriov().

The second part is to actually create the tunneling resources required
on the master to support a slave.  This is performed the master
detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event
generated when a slave initializes its comm channel).

For the master, there is no such startup event, so it creates its own
tunneling resources when it starts up.  In addition, the master also
creates the real special QPs.  The ib_core layer on the master causes
creation of proxy special QPs, since the master is also
paravirtualized at the ib_core layer.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The sm_lock spinlock is taken in the process context by
mlx4_ib_modify_device, and in the interrupt context by update_sm_ah,
so we need to take that spinlock with irqsave, and release it with
irqrestore.

Lockdeps reports this as follows:

    [ INFO: inconsistent lock state ]
    3.5.0+ #20 Not tainted
    inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
    swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
    (&(&ibdev->sm_lock)->rlock){?.+...}, at: [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib]
    {HARDIRQ-ON-W} state was registered at:
      [<ffffffff810b84a0>] mark_irqflags+0x120/0x190
      [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0
      [<ffffffff810b9f51>] lock_acquire+0xb1/0x150
      [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50
      [<ffffffffa028d563>] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib]
      [<ffffffffa026d1fc>] ib_modify_device+0x1c/0x20 [ib_core]
      [<ffffffffa026c353>] set_node_desc+0x83/0xc0 [ib_core]
      [<ffffffff8136a150>] dev_attr_store+0x20/0x30
      [<ffffffff81201fd6>] sysfs_write_file+0xe6/0x170
      [<ffffffff8118da38>] vfs_write+0xc8/0x190
      [<ffffffff8118dc01>] sys_write+0x51/0x90
      [<ffffffff8155b869>] system_call_fastpath+0x16/0x1b

    ...
    *** DEADLOCK ***

    1 lock held by swapper/0/0:

    stack backtrace:
    Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20
    Call Trace:
    <IRQ>  [<ffffffff810b7bea>] print_usage_bug+0x18a/0x190
    [<ffffffff810b7370>] ? print_irq_inversion_bug+0x210/0x210
    [<ffffffff810b7fb2>] mark_lock_irq+0xf2/0x280
    [<ffffffff810b8290>] mark_lock+0x150/0x240
    [<ffffffff810b84ef>] mark_irqflags+0x16f/0x190
    [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff810b9f51>] lock_acquire+0xb1/0x150
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50
    [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffffa026b2fa>] ? ib_create_ah+0x1a/0x40 [ib_core]
    [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib]
    [<ffffffff810c27c3>] ? is_module_address+0x23/0x30
    [<ffffffffa028b05b>] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib]
    [<ffffffffa028c177>] mlx4_ib_event+0x117/0x160 [mlx4_ib]
    [<ffffffff81552501>] ? _raw_spin_lock_irqsave+0x61/0x70
    [<ffffffffa022718c>] mlx4_dispatch_event+0x6c/0x90 [mlx4_core]
    [<ffffffffa0221b40>] mlx4_eq_int+0x500/0x950 [mlx4_core]

Reported by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Enable callers of mlx4_assign_eq to supply a pointer to cpu_rmap.
If supplied, the assigned IRQ is tracked using rmap infrastructure.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the user queries for device capabilities, fill in the
masked_atomic_cap attribute with the real support level of atomic
capabilities instead of using a hard coded value.
Signed-off-by: NDotan Barak <dotanb@dev.mellanox.co.il>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The port management change event can replace smp_snoop.  If the
capability bit for this event is set in dev-caps, the event is used
(by the driver setting the PORT_MNG_CHG_EVENT bit in the async event
mask in the MAP_EQ fw command).  In this case, when the driver passes
incoming SMP PORT_INFO SET mads to the FW, the FW generates port
management change events to signal any changes to the driver.

If the FW generates these events, smp_snoop shouldn't be invoked in
ib_process_mad(), or duplicate events will occur (once from the
FW-generated event, and once from smp_snoop).

In the case where the FW does not generate port management change
events smp_snoop needs to be invoked to create these events.  The flow
in smp_snoop has been modified to make use of the same procedures as
in the fw-generated-event event case to generate the port management
events (LID change, Client-rereg, Pkey change, and/or GID change).

Port management change event handling required changing the
mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument
(last argument) had to be changed to unsigned long in order to
accomodate passing the EQE pointer.

We also needed to move the definition of struct mlx4_eqe from
net/mlx4.h to file device.h -- to make it available to the IB driver,
to handle port management change events.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Define pr_fmt and add some pr_debug prints.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver is modified to support three operation modes.

If supported by firmware use the device managed flow steering
API, that which we call device managed steering mode. Else, if
the firmware supports the B0 steering mode use it, and finally,
if none of the above, use the A0 steering mode.

When the steering mode is device managed, the code is modified
such that L2 based rules set by the mlx4_en driver for Ethernet
unicast and multicast, and the IB stack multicast attach calls
done through the mlx4_ib driver are all routed to use the device
managed API.

When attaching rule using device managed flow steering API,
the firmware returns a 64 bit registration id, which is to be
provided during detach.

Currently the firmware is always programmed during HCA initialization
to use standard L2 hashing. Future work should be done to allow
configuring the flow-steering hash function with common, non
proprietary means.
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Limit the max number of WQEs per QP reported when querying the
   device, so that ib_create_qp() will not fail for a QP size that the
   device claimed to support due to additional headroom WQEs being
   allocated.

2. Limit qp resources accepted for ib_create_qp() to the limits
   reported in ib_query_device().  In kernel space, make sure that the
   limits returned to the caller following qp creation also lie within
   the reported device limits. For userspace, report as before, and do
   adjustment in libmlx4 (so as not to break ABI).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NSagi Grimberg <sagig@mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit e605b743 ("IB/mlx4: Increase the number of vectors (EQs)
available for ULPs") didn't handle correctly the case where there
aren't enough MSI-X vectors to increase the number of EQs, so only the
legacy EQs are allocated.  This results in an attempt to memset() to
zero the EQ table which was never allocated and a kernel crash.

Fix this by checking in the teardown flow if the table of EQs was ever
allocated.  Also remove some unneeded setting to zero of the EQ
related fields in struct mlx4_ib_dev.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We need to use a different loop index for mlx4_counter_alloc() and for
device_create_file() iterations: the mlx4_counter_alloc() loop index
is used in the error flow to free counters.

If the same loop index is used for device_create_file() and, say, the
device_create_file() loop fails on the first iteration, the allocated
counters will not be freed.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Enable IB ULPs to use a larger portion of the device EQs (which map to
IRQs).  The mlx4_ib driver follows the mlx4_core framework of the EQs
to be divided among the device ports.  In this scheme, for each IB
port, the number of allocated EQs follows the number of cores, subject
to other system constraints, such as number available MSI-X vectors.
Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com>

[ Replace one more printk_once() with pr_info_once().  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If the call to mlx4_MAD_IFC() fails in ib_link_query_port() we will
currently do 'return err;' which will leak 'in_mad' and 'out_mad'.  We
should instead do 'goto out;' where we'll properly free the memory we
previously allocated.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When the IB port is down, the active_speed value returned by the
MAD_IFC command is seven (7) which isn't among the defined IB speeds
in enum ib_port_speed, and this invalid speed value is passed up to
higher layers or applications who do port query.

Fix that by setting the speed to be SDR -- the lowest possible -- when
the port is down.
Signed-off-by: NRoland Dreier <roland@purestorage.com>

To issue a port query, use the QUERY_(Ethernet)_PORT command instead
of the MAD_IFC command, since MAD_IFC attempts to query the firmware
IB SMA, which is irrelevant for IBoE ports.

This allows us to handle both 10Gb/s and 40Gb/s rates (e.g in sysfs),
using QDR speed (10Gb/s) and width of 1X or 4X.
Signed-off-by: NDotan Barak <dotanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

While doing the work for commit a6f7feae ("IB/mlx4: pass SMP
vendor-specific attribute MADs to firmware") we realized that the
firmware would respond on all sorts of vendor-specific MADs.
Therefore commit 97285b78 ("mlx4_core: Add extended port
capabilities support") adds redundant code into the driver, since
there's no real reaon to maintain the extended capabilities of the
port, as they can be queried on demand (e.g the FDR10 capability).

This patch reverts commit 97285b78 and removes the check for
extended caps from the mlx4_ib driver port query flow.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>