Since the driver uses the DMA API, we should pass it valid DMA masks.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NPetr Stetiar <ynezz@true.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mach-nomadik machine did not compile properly due to bad
ux500-specific functions being called. Introduce new state
variables to fix this up.
Reported-by: NAxel Lin <axel.lin@gmail.com>
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: Prafulla Wadaskar <prafulla.wadaskar@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Currently, both the WM8903 and TPS6586x chips attempt to register with
gpiolib using the same GPIO numbers. This causes the audio driver to
fail to initialize.

To solve this, add a define to board-harmony.h for the TPS6586x, and make
board-harmony-power.c use this define, instead of directly referencing
TEGRA_NR_GPIOS.

This fixes a regression introduced by commit
6f168f2f.
ARM: tegra: harmony: initialize the TPS65862 PMIC
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NColin Cross <ccross@android.com>

Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

s3c24xx_irq_syscore_ops was only defined for s3c2410 cpus leading
to compile errors on for example 2412 and 2416.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

s3c2410_dma_chan is not a type itself, so struct is required.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

There's no place to use these functions.
and actually no need to set the platform data.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Remove compiler warning when no CONFIG_PM

arch/arm/mach-exynos4/time.c:209:
        warning: 'exynos4_pwm4_resume' defined but not used
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Added Kconfig entry for setup-usb-phy.c on which EHCI support
is dependent on.

Following the naming convention of other setup files, we have
following renaming.
	usb-phy.c ==> setup-usb-phy.c
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

These definitions are needed to let the runtime PM subsystem turn off
DMAC clocks, when it is suspended by the driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Basically, other S3C SoCs and S5PC100 use 'S3C_VA_USB_HSPHY'
commonly. It should be changed to 'S3C_VA_USB_HSPHY' for common
usage and others. Now happens build error on S5PC100.

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Changed the SPI platform device name from S5P6450 to S5P64x0 as it is
defined common for both S5p6440 and S5P6450 in dev-spi.c of S5P64x0.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

4 micro seconds is not enough for PBIAS if MMC regulator is
enabled from MMC regulator OFF.
Increase the delay for PBIAS to stabilize.
Wait for PBIAS and timeout if not.

Resolves MMC/SD failure on OMAP4
"Pbias Voltage is not same as LDO"
Signed-off-by: NBalaji T K <balajitk@ti.com>
Acked-by: NKishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Several boards defining mtd partitions also defined NAND_BLOCK_SIZE as
SZ_128K. Move the define to common-board-devices.h

This removes multiple defines of NAND_BLOCK_SIZE.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
[tony@atomide.com: updated comments]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit 407a6888 (OMAP4: hwmod data:
Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU) added the
entry for keypad, but did not enable it.

Enable the keypad in the hwmod database so it works.

Signed-off-by: Shubhrajyoti D<shubhrajyoti@ti.com>
Acked-by: Benoit Cousson<b-cousson@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Free Beagle rev gpios when they are read, so others can read them later
Signed-off-by: NTasslehoff Kjappfot <tasskjapp@gmail.com>
[tony@atomide.com: updated comments]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Without msecure beeing high it isn't possible to set (or start)
the RTC.

Tested with a BeagleBoard C4.
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Speaker amplifier is accidentally powered up in early TWL gpio setup. This
causes a few mA of needless battery current consumption. Without this patch
the amplifier can be shutdown only by having one active audio playback and
shutdown cycle to speaker output.

Thanks to Kalle Jokiniemi <kalle.jokiniemi@nokia.com> for noticing the issue.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Cc: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The V28_A domain in Nokia N900 that supplies VDD voltages to TLV320AIC34 and
TPA6130A2 should not be shutdown. This is because otherwise there will be
leak from VIO to VDD in TLV320AIC34 and this leak consumes more battery
current that is saved from keeping V28_A off. With this patch the battery
current consumption is approximately 1.5 mA lower.

Thanks to Kalle Jokiniemi <kalle.jokiniemi@nokia.com> for noticing the issue.
Signed-off-by: NJarkko Nikula <jhnikula@gmail.com>
Cc: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

eMMC does not handle power off when not in sleep state,
Skip regulator disable during probe when eMMC is
not in known state - state left by bootloader.

Resolves eMMC failure on OMAP4
mmc0: error -110 whilst initialising MMC card
Signed-off-by: NBalaji T K <balajitk@ti.com>
Tested-by: NKishore Kadiyala <kishore.kadiyala@ti.com>
Acked-by: NKishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

introduced by: 96974a24
(omap: consolidate touch screen initialization among different boards)

ads7846 driver can use either gpio_pendown or get_pendown_state()
callback. In case of gpio_pendown, it requests the provided gpio_pendown
thus resulting in double requesting that gpio:

ads7846 spi1.0: failed to request pendown GPIO57
ads7846: probe of spi1.0 failed with error -16

Fix this by restricting the gpio request to the case of
get_pendown_state() callback is used.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Tested-by: NThomas Weber <weber@corscience.de>
Signed-off-by: NTony Lindgren <tony@atomide.com>

!dev case needs iounmap before return.
Signed-off-by: NTodd Poynor <toddpoynor@google.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

OMAP4 contains two separate instances of the padconf registers,
one in the core system config and one in the wakeup system config.
Pass in two tables to apply the correct values to each instance.
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

OMAP4 has two mux instances, and the board may not have settings
for one of them.  Allow the board file to pass NULL for an
instance's mux settings, which will initialize the mux instance
but skip writing board settings.
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Don't PTR_ERR() a non-error pointer:

 initcall omap4_l3_init+0x0/0xdc returned -544980480 after 0 usecs
 initcall omap4_l3_init+0x0/0xdc returned with error code -544980480
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit d038aee2
"omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag",
changes iovmm to receive flags specified by user, however
the upper 16 bits of the flags are wiped by iovmm itself.

This fixes IOVMF_DA_FIXED flags from being lost, and lets the user
map its desired "device addresses".
Signed-off-by: NOmar Ramirez Luna <omar.ramirez@ti.com>
Acked-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Platform_device_del should be called before platform_device_put, as
platform_device_put can delete the structure.

Additionally, improve the error handling code for the call to ioremap, so
that it calls platform_device_put.

The semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2;
@@

*platform_device_put(e1);
... when != e1 = e2
*platform_device_del(e1);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix below compilation warnings.

arch/arm/mach-omap2/omap_hwmod.c: In function 'omap_hwmod_for_each':
arch/arm/mach-omap2/omap_hwmod.c:1631: warning: 'ret' may be used uninitialized in this function

arch/arm/mach-omap2/mux.c: In function 'omap_mux_get_gpio':
arch/arm/mach-omap2/mux.c:917: warning: 'm' may be used uninitialized in this function
Signed-off-by: NGovindraj.R <govindraj.raja@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix below build warning.

 CC	arch/arm/plat-omap/sram.o
	arch/arm/plat-omap/sram.c: In function 'omap_map_sram':
	arch/arm/plat-omap/sram.c:224: warning: format '%08lx' expects
	type 'long unsigned int', but argument 2 has type 'unsigned int'

While at this, convert SRAM printk(* "") to pr_*("").
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

WARNING: arch/arm/mach-omap2/built-in.o(.text+0x11014): Section mismatch
in reference from the function cm_t3517_init_usbh() to the (unknown
reference) .init.data:(unknown)
The function cm_t3517_init_usbh() references
the (unknown reference) __initdata (unknown).
This is often because cm_t3517_init_usbh lacks a __initdata
annotation or the annotation of (unknown) is wrong.
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The serial*_data should have been marked as __initdata as per
it's usage in the board files. Fix the same to remove the
section mismatch warnings caused by it.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NSilesh C V <silesh@ti.com>
[tony@atomide.com: updated with additional fixes from Silesh]
Signed-off-by: NTony Lindgren <tony@atomide.com>

I got some build error like below while executing "make omap2plus_defconfig".

  CC      arch/arm/mach-omap2/board-2430sdp.o
arch/arm/mach-omap2/board-2430sdp.c: In function 'omap_2430sdp_init':
arch/arm/mach-omap2/board-2430sdp.c:247: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function)
arch/arm/mach-omap2/board-2430sdp.c:247: error: (Each undeclared identifier is reported only once
arch/arm/mach-omap2/board-2430sdp.c:247: error: for each function it appears in.)

This patch fixes the build error by include linux/gpio.h instead of mach/gpio.h.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: Syed Mohammed Khasim <x0khasim@ti.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
Cc: Steve Sakoman <steve@sakoman.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Forward-declare platform_device structure in
arch/arm/plat-omap/include/plat/flash.h, otherwise compilation may break
with:

In file included from arch/arm/mach-omap1/flash.c:15:
arch/arm/plat-omap/include/plat/flash.h:14: warning: 'struct platform_device' declared inside parameter list
arch/arm/plat-omap/include/plat/flash.h:14: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/mach-omap1/flash.c:16: warning: 'struct platform_device' declared inside parameter list
arch/arm/mach-omap1/flash.c:17: error: conflicting types for 'omap1_set_vpp'
arch/arm/plat-omap/include/plat/flash.h:14: error: previous declaration of 'omap1_set_vpp' was here

Detected and corrected while building for Amstrad Delta, confirmed with
omap1_defconfig.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: NMike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The software division functions never had unwinding annotations
added. Currently, when a division by zero occurs the backtrace shown
will stop at Ldiv0 or some completely unrelated function. Add
unwinding annotations in hopes of getting a more useful backtrace
when a division by zero occurs.
Signed-off-by: NLaura Abbott <lauraa@codeaurora.org>
Acked-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move OMAP GPIO driver to drivers/gpio.  Builds whenever
CONFIG_ARCH_OMAP=y.
Signed-off-by: NKevin Hilman <khilman@ti.com>

Register offset defines are moved to <plat/gpio.h> so they can be used
by SoC-specific device init code to fill out platform_data register
offsets.
Signed-off-by: NKevin Hilman <khilman@ti.com>

The previous style change enables to use asm-generic/bitops/le.h on arm.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The style that we normally use in asm-generic is to test the macro itself
for existence, so in asm-generic, do:

	#ifndef find_next_zero_bit_le
	extern unsigned long find_next_zero_bit_le(const void *addr,
		unsigned long size, unsigned long offset);
	#endif

and in the architectures, write

	static inline unsigned long find_next_zero_bit_le(const void *addr,
		unsigned long size, unsigned long offset)
	#define find_next_zero_bit_le find_next_zero_bit_le

This adds the #define for each of the optimized find bitops in the
architectures.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>