Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 1月, 2012 2 次提交
    • M
      gspca: Fix falling back to lower isoc alt settings · ac97ecc8
      由 Mauro Carvalho Chehab 提交于 
      The current gspca core code has a regression where it no longer properly
falls back to lower alt settings when there is not enough bandwidth.

This causes many iso based usb-1 cameras to not work when plugged into a
usb2 hub or a sandybridge chipset motherboard!

This patch fixes this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ac97ecc8
    • H
      futex: Fix uninterruptible loop due to gate_area · e6780f72
      由 Hugh Dickins 提交于 
      It was found (by Sasha) that if you use a futex located in the gate
area we get stuck in an uninterruptible infinite loop, much like the
ZERO_PAGE issue.

While looking at this problem, PeterZ realized you'll get into similar
trouble when hitting any install_special_pages() mapping.  And are there
still drivers setting up their own special mmaps without page->mapping,
and without special VM or pte flags to make get_user_pages fail?

In most cases, if page->mapping is NULL, we do not need to retry at all:
Linus points out that even /proc/sys/vm/drop_caches poses no problem,
because it ends up using remove_mapping(), which takes care not to
interfere when the page reference count is raised.

But there is still one case which does need a retry: if memory pressure
called shmem_writepage in between get_user_pages_fast dropping page
table lock and our acquiring page lock, then the page gets switched from
filecache to swapcache (and ->mapping set to NULL) whatever the refcount.
Fault it back in to get the page->mapping needed for key->shared.inode.
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e6780f72
  3. 31 12月, 2011 7 次提交
  5. 30 12月, 2011 11 次提交
    • L
      Merge branch 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · 89307bab
      由 Linus Torvalds 提交于 
      * 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Initialize domain->handler in iommu_domain_alloc()
      89307bab
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 50b2abed
      由 Linus Torvalds 提交于 
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  packet: fix possible dev refcnt leak when bind fail
  netem: dont call vfree() under spinlock and BH disabled
  netfilter: ctnetlink: fix scheduling while atomic if helper is autoloaded
  netfilter: ctnetlink: fix return value of ctnetlink_get_expect()
      50b2abed
    • L
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 7578ed02
      由 Linus Torvalds 提交于 
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix raw_spin_unlock_irqrestore() usage
  oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue
      7578ed02
    • L
      Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs · d2bac6ab
      由 Linus Torvalds 提交于 
      * 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: log all dirty inodes in xfs_fs_sync_fs
  xfs: log the inode in ->write_inode calls for kupdate
      d2bac6ab
    • L
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 1cac8e88
      由 Linus Torvalds 提交于 
      * 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix blk_queue_end_tag()
  block: re-use existing 'reading' variable instead of checking direction again
  block, cfq: fix empty queue crash caused by request merge
      1cac8e88
    • H
      mm: hugetlb: fix non-atomic enqueue of huge page · b0365c8d
      由 Hillf Danton 提交于 
      If a huge page is enqueued under the protection of hugetlb_lock, then the
operation is atomic and safe.
Signed-off-by: NHillf Danton <dhillf@gmail.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>		[2.6.37+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b0365c8d
    • A
      procfs: do not confuse jiffies with cputime64_t · 34845636
      由 Andreas Schwab 提交于 
      Commit 2a95ea6c ("procfs: do not overflow get_{idle,iowait}_time
for nohz") did not take into account that one some architectures jiffies
and cputime use different units.

This causes get_idle_time() to return numbers in the wrong units, making
the idle time fields in /proc/stat wrong.

Instead of converting the usec value returned by
get_cpu_{idle,iowait}_time_us to units of jiffies, use the new function
usecs_to_cputime64 to convert it to the correct unit of cputime64_t.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Artem S. Tashkinov" <t.artem@mailcity.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      34845636
    • K
      mm/mempolicy.c: refix mbind_range() vma issue · e26a5114
      由 KOSAKI Motohiro 提交于 
      commit 8aacc9f5 ("mm/mempolicy.c: fix pgoff in mbind vma merge") is the
slightly incorrect fix.

Why? Think following case.

1. map 4 pages of a file at offset 0

   [0123]

2. map 2 pages just after the first mapping of the same file but with
   page offset 2

   [0123][23]

3. mbind() 2 pages from the first mapping at offset 2.
   mbind_range() should treat new vma is,

   [0123][23]
     |23|
     mbind vma

   but it does

   [0123][23]
     |01|
     mbind vma

   Oops. then, it makes wrong vma merge and splitting ([01][0123] or similar).

This patch fixes it.

[testcase]
  test result - before the patch

	case4: 126: test failed. expect '2,4', actual '2,2,2'
       	case5: passed
	case6: passed
	case7: passed
	case8: passed
	case_n: 246: test failed. expect '4,2', actual '1,4'

	------------[ cut here ]------------
	kernel BUG at mm/filemap.c:135!
	invalid opcode: 0000 [#4] SMP DEBUG_PAGEALLOC

	(snip long bug on messages)

  test result - after the patch

	case4: passed
       	case5: passed
	case6: passed
	case7: passed
	case8: passed
	case_n: passed

  source:  mbind_vma_test.c
============================================================
 #include <numaif.h>
 #include <numa.h>
 #include <sys/mman.h>
 #include <stdio.h>
 #include <unistd.h>
 #include <stdlib.h>
 #include <string.h>

static unsigned long pagesize;
void* mmap_addr;
struct bitmask *nmask;
char buf[1024];
FILE *file;
char retbuf[10240] = "";
int mapped_fd;

char *rubysrc = "ruby -e '\
  pid = %d; \
  vstart = 0x%llx; \
  vend = 0x%llx; \
  s = `pmap -q #{pid}`; \
  rary = []; \
  s.each_line {|line|; \
    ary=line.split(\" \"); \
    addr = ary[0].to_i(16); \
    if(vstart <= addr && addr < vend) then \
      rary.push(ary[1].to_i()/4); \
    end; \
  }; \
  print rary.join(\",\"); \
'";

void init(void)
{
	void* addr;
	char buf[128];

	nmask = numa_allocate_nodemask();
	numa_bitmask_setbit(nmask, 0);

	pagesize = getpagesize();

	sprintf(buf, "%s", "mbind_vma_XXXXXX");
	mapped_fd = mkstemp(buf);
	if (mapped_fd == -1)
		perror("mkstemp "), exit(1);
	unlink(buf);

	if (lseek(mapped_fd, pagesize*8, SEEK_SET) < 0)
		perror("lseek "), exit(1);
	if (write(mapped_fd, "\0", 1) < 0)
		perror("write "), exit(1);

	addr = mmap(NULL, pagesize*8, PROT_NONE,
		    MAP_SHARED, mapped_fd, 0);
	if (addr == MAP_FAILED)
		perror("mmap "), exit(1);

	if (mprotect(addr+pagesize, pagesize*6, PROT_READ|PROT_WRITE) < 0)
		perror("mprotect "), exit(1);

	mmap_addr = addr + pagesize;

	/* make page populate */
	memset(mmap_addr, 0, pagesize*6);
}

void fin(void)
{
	void* addr = mmap_addr - pagesize;
	munmap(addr, pagesize*8);

	memset(buf, 0, sizeof(buf));
	memset(retbuf, 0, sizeof(retbuf));
}

void mem_bind(int index, int len)
{
	int err;

	err = mbind(mmap_addr+pagesize*index, pagesize*len,
		    MPOL_BIND, nmask->maskp, nmask->size, 0);
	if (err)
		perror("mbind "), exit(err);
}

void mem_interleave(int index, int len)
{
	int err;

	err = mbind(mmap_addr+pagesize*index, pagesize*len,
		    MPOL_INTERLEAVE, nmask->maskp, nmask->size, 0);
	if (err)
		perror("mbind "), exit(err);
}

void mem_unbind(int index, int len)
{
	int err;

	err = mbind(mmap_addr+pagesize*index, pagesize*len,
		    MPOL_DEFAULT, NULL, 0, 0);
	if (err)
		perror("mbind "), exit(err);
}

void Assert(char *expected, char *value, char *name, int line)
{
	if (strcmp(expected, value) == 0) {
		fprintf(stderr, "%s: passed\n", name);
		return;
	}
	else {
		fprintf(stderr, "%s: %d: test failed. expect '%s', actual '%s'\n",
			name, line,
			expected, value);
//		exit(1);
	}
}

/*
      AAAA
    PPPPPPNNNNNN
    might become
    PPNNNNNNNNNN
    case 4 below
*/
void case4(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 4);
	mem_unbind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("2,4", retbuf, "case4", __LINE__);

	fin();
}

/*
       AAAA
 PPPPPPNNNNNN
 might become
 PPPPPPPPPPNN
 case 5 below
*/
void case5(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_bind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("4,2", retbuf, "case5", __LINE__);

	fin();
}

/*
	    AAAA
	PPPPNNNNXXXX
	might become
	PPPPPPPPPPPP 6
*/
void case6(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_bind(4, 2);
	mem_bind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("6", retbuf, "case6", __LINE__);

	fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPPPPPXXXX 7
*/
void case7(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_interleave(4, 2);
	mem_bind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("4,2", retbuf, "case7", __LINE__);

	fin();
}

/*
    AAAA
PPPPNNNNXXXX
might become
PPPPNNNNNNNN 8
*/
void case8(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	mem_bind(0, 2);
	mem_interleave(4, 2);
	mem_interleave(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("2,4", retbuf, "case8", __LINE__);

	fin();
}

void case_n(void)
{
	init();
	sprintf(buf, rubysrc, getpid(), mmap_addr, mmap_addr+pagesize*6);

	/* make redundunt mappings [0][1234][34][7] */
	mmap(mmap_addr + pagesize*4, pagesize*2, PROT_READ|PROT_WRITE,
	     MAP_FIXED|MAP_SHARED, mapped_fd, pagesize*3);

	/* Expect to do nothing. */
	mem_unbind(2, 2);

	file = popen(buf, "r");
	fread(retbuf, sizeof(retbuf), 1, file);
	Assert("4,2", retbuf, "case_n", __LINE__);

	fin();
}

int main(int argc, char** argv)
{
	case4();
	case5();
	case6();
	case7();
	case8();
	case_n();

	return 0;
}
=============================================================
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Caspar Zhang <caspar@casparzhang.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: <stable@vger.kernel.org>		[3.1.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e26a5114
    • H
      gspca: Fix bulk mode cameras no longer working (regression fix) · 757e55c2
      由 Hans de Goede 提交于 
      The new iso bandwidth calculation code accidentally has broken support
for bulk mode cameras. This has broken the following drivers:
finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x,
stv0680, vicam.

Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam
cams.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      757e55c2
    • T
      Input: sentelic - fix retrieving number of buttons · 6ccbcf2c
      由 Tai-hwa Liang 提交于 
      Fixing wrong register offset which is used to retrieve the number of buttons
attached to the hardware.
Signed-off-by: NTai-hwa Liang <avatar@sentelic.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
      6ccbcf2c
    • S
      ceph: disable use of dcache for readdir etc. · a4d46363
      由 Sage Weil 提交于 
      Ceph attempts to use the dcache to satisfy negative lookups and readdir
when the entire directory contents are in cache.  Disable this behavior
until lingering bugs in this code are shaken out; we'll re-enable these
hooks once things are fully stable.
Signed-off-by: NSage Weil <sage@newdream.net>
      a4d46363
  7. 29 12月, 2011 1 次提交
  9. 28 12月, 2011 4 次提交
  11. 27 12月, 2011 5 次提交
  13. 26 12月, 2011 9 次提交
  15. 25 12月, 2011 1 次提交