- 30 10月, 2009 11 次提交
-
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Tentative support for newer Marvell hardware including the Yukon-2 Optima chip. Do not have hatdware to test this yet, code is based on vendor driver. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Changes related to support of Yukon supreme chip. Don't have this chip version to test on, these are reverse engineered from the vendor (GPL) driver. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Program the receive pause thresholds differently depending on chip version. This cloned from from the vendor (GPL) driver. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This adds infrastructure for the newer chip versions and workarounds. Extracted from the vendor (GPL) driver. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This is a new ID that just showed up in latest vendor driver. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Now that we can tell whether GRO is being applied, this heuristic is effective once more. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
When GRO is successfully merging received packets, we should allocate raw page buffers rather than skbs that will be discarded by GRO. Otherwise, we should allocate skbs. GRO also benefits from higher interrupt moderation, so increase the score for mergeable RX packets. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This will allow drivers to adjust their receive path dynamically based on whether GRO is being applied successfully. Currently all in-tree callers ignore the return values of these functions and do not need to be changed. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This clarifies which return and parameter types are GRO result codes and not RX result codes. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 29 10月, 2009 29 次提交
-
-
由 Gabor Gombas 提交于
Currently PACKET_TX_RING forces certain amount of every frame to remain unused. This probably originates from an early version of the PACKET_TX_RING patch that in fact used the extra space when the (since removed) CONFIG_PACKET_MMAP_ZERO_COPY option was enabled. The current code does not make any use of this extra space. This patch removes the extra space reservation and lets userspace make use of the full frame size. Signed-off-by: NGabor Gombas <gombasg@sztaki.hu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cyrill Gorcunov 提交于
proto_ops->getname implies copying protocol specific data into storage unit (particulary to __kernel_sockaddr_storage). So when we implement new protocol support we should keep such a detail in mind (which is easy to forget about). Lets introduce DECLARE_SOCKADDR helper which check if storage unit is not overfowed at build time. Eventually inet_getname is switched to use DECLARE_SOCKADDR (to show example of usage). Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Some workloads hit dev_base_lock rwlock pretty hard. We can use RCU lookups to avoid touching this rwlock. netdevices are already freed after a RCU grace period, so this patch adds no penalty at device dismantle time. dev_ifname() converted to dev_get_by_index_rcu() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
The variables are unsigned so the `< 0' test always fails, the other part of the test catches wrapped values. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
optlen is unsigned so the `< 0' test is never true. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
If there is data, the unsigned skb->len is greater than 0. rt.sigdigits is unsigned as well, so the test `>= 0' is always true, the other part of the test catches wrapped values. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Replace the sequence of strcmp calls for interpreting ZSAU parameter strings by a table of known strings and lookup loop to improve readability. Impact: readability improvement, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
On more step towards the holy grail of checkpatch.pl silence. Impact: cosmetic Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
On the quest for the holy grail of checkpatch.pl silence. Impact: cosmetic Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Duly uglified as demanded by checkpatch.pl. Impact: cosmetic Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Dum sanctis checkpatch.pl'ae legibus obsequimur. Impact: cosmetic Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Reorganize the code of the Gigaset M10x driver to make it more readable, less redundant, better aligned to the style of other parts of the driver, and cause fewer checkpatch.pl complaints. Impact: code reorganization, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The CAPI interface incorrectly assumed that CAPI messages would always start at the beginning of the data buffer: fix by treating DATA_B3 messages as the link layer header to their payload data. This fix changes the way acknowledgement information is propagated through the hardware specific modules and thereby impacts the ISDN4Linux variant of the driver, too. Also some assumptions about methods not being called from interrupt context turned out to be unwarranted; fix by using dev_kfree_skb_any() wherever non-interrupt context isn't guaranteed. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
A missing dot lead to garbage characters being included in the dial command generated from a CAPI CONNECT_REQ message, which interestingly enough worked anyway, illustrating the resilience of the device. Impact: bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Replace the "ignoring Additional Info" warning message by better readable ones citing the specific subparameters being ignored. Make parts of the code more readable by using a local cmsg pointer variable. Impact: readability improvement Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
Add and use no DSCAK bit in the features field. Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: NOri Finkelman <ori@comsleep.com> Sigend-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
Add and use no window scale bit in the features field. Note that this is not the same as setting a window scale of 0 as would happen with window limit on route. Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: NOri Finkelman <ori@comsleep.com> Sigend-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
Implement querying and acting upon the no timestamp bit in the feature field. Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: NOri Finkelman <ori@comsleep.com> Sigend-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
Implement querying and acting upon the no sack bit in the features field. Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: NOri Finkelman <ori@comsleep.com> Sigend-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
Adding an accessor to existing dst_entry feautres field and refactor the only supported feature (allfrag) to use it. Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: NOri Finkelman <ori@comsleep.com> Sigend-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
We need tcp_parse_options to be aware of dst_entry to take into account per dst_entry TCP options settings Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Sigend-off-by: NOri Finkelman <ori@comsleep.com> Sigend-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gilad Ben-Yossef 提交于
Since we only use tcp_parse_options here to check for the exietence of TCP timestamp option in the header, it is better to call with the "established" flag on. Signed-off-by: NGilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: NOri Finkelman <ori@comsleep.com> Signed-off-by: NYony Amit <yony@comsleep.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Janusz Krzysztofik 提交于
I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Speedup module unloading by factorizing synchronize_rcu() calls Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-