- 09 7月, 2014 1 次提交
-
-
由 Michal Marek 提交于
Commit 5180d5f4 ("firmware: Simplify directory creation") broke including firmware specified in CONFIG_EXTRA_FIRMWARE: MK_FW firmware/amd-ucode/microcode_amd.bin.gen.S /bin/sh: firmware/amd-ucode/microcode_amd.bin.gen.S: No such file or directory ... firmware/Makefile:185: recipe for target 'firmware/amd-ucode/microcode_amd.bin.gen.S' failed It works with O= builds, because the directory is created by Makefile.build. Create the directory in firmware/Makefile in non-O builds. Reported-and-tested-by: NRonald Uitermark <ronald645@gmail.com> Reported-and-tested-by: NTorsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 15 5月, 2014 2 次提交
-
-
由 Michal Marek 提交于
The literal " confuses syntax highlighting in vim. Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
由 Michal Marek 提交于
When building the firmware blobs, use a simple loop to create directories in $(objtree), like in Makefile.build. This simplifies the rules and also makes it possible to set $(objtree) to '.' later. Before this change, a dependency on $(objtree)/<dir> would be satisfied by <dir> in $(srctree). When installing the firmware blobs, call mkdir like in Makefile.modinst. Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 17 4月, 2014 1 次提交
-
-
由 Jean Delvare 提交于
These serial drivers were removed in kernel v3.1, so we can drop their documentation files and references to their magic numbers and parameters. There are still references to these old drivers in Documentation/devices.txt but I'm afraid they can't be removed. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Rob Landley <rob@landley.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 12月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
Commit b8e24bfa ('emi62: use request_firmware()') made emi62/bitstream.HEX a copy of emi26/bitstream.HEX. Re-do the conversion from drivers/usb/misc/emi62_fw_{m,s}.h (these headers contained the same bitstream but different firmware). This produces an identical blob to the known working version in http://people.xiph.org/~xiphmont/emagic/emi-20131209.tgzReported-by: NMonty <xiphmont@xiph.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 4月, 2013 1 次提交
-
-
由 Mike Marciniszyn 提交于
Commit e2eed58b ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 3月, 2013 1 次提交
-
-
由 Vinit Agnihotri 提交于
These changes modify the qib driver as part of acquiring the InfiniBand assets of QLogic. Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 22 11月, 2012 1 次提交
-
-
由 Tim Gardner 提交于
dabusb was removed with commit dae86ccb ("[media] dabusb: remove obsolete driver"), so remove the last vestiges of firmware and documentation. Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Cc: Rob Landley <rob@landley.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 8月, 2012 1 次提交
-
-
由 Tim Gardner 提交于
The only Computone support left in the kernel is in drivers/tty/serial/8250/8250_pci.c. CONFIG_COMPUTONE is no longer a valid option. Therefore, remove firmware, documentation, and the last vestiges of this driver. Cc: Rob Landley <rob@landley.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NTim Gardner <tim.gardner@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 8月, 2012 1 次提交
-
-
由 Tim Gardner 提交于
The current firmware version used by the device driver is 7.12.0 Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
-
- 16 5月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
This represents the mass deletion of the of the tokenring support. It gets rid of: - the net/tr.c which the drivers depended on - the drivers/net component - the Kbuild infrastructure around it - any tokenring related CONFIG_ settings in any defconfigs - the tokenring headers in the include/linux dir - the firmware associated with the tokenring drivers. - any associated token ring documentation. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 16 1月, 2012 1 次提交
-
-
由 Ben Hutchings 提交于
This parameter blob and generator program have been moved to the linux-firmware.git repository. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
-
- 21 12月, 2011 1 次提交
-
-
由 Ben Hutchings 提交于
David and I are sharing maintenance of this repository. Patches should be sent to both of us. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 7月, 2011 7 次提交
-
-
由 Adam Gruchala 提交于
C0 silicon updates the pci revision id and requires new AFE parameters for phy signal integrity. Support for previous silicon revisions is deprecated (it's also broken for the theoretical case of multiple controllers at different silicon revisions, all the more reason to get it removed as soon as possible) Signed-off-by: NAdam Gruchala <adam.gruchala@intel.com> [fixed up deprecated silicon support] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The element_length is 2 bytes. Reported-by: NYinghai Lu <yinghai.lu@oracle.com> Acked-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The original apc mode definition is the correct one, the fix from commit 4711ba10 "isci: fix oem parameter initialization and mode detection" was based on a typo from a specification update. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
1/ Since commit 858d4aa7 "isci: Move firmware loading to per PCI device" we have been silently falling back to built-in defaults for the parameter settings by skipping the call to scic_oem_parameters_set(). 2/ The afe parameters from the firmware were not being honored 3/ The latest oem parameter definition flips the mode_type values which are now 0: for APC 1: for MPC. For APC we need to make sure all the phys default to the same address otherwise strict_wide_ports will cause duplicate domains. 4/ Fix up the driver announcement to indicate the source of the parameters. 5/ Fix up the sas addresses to be unique per controller (in the fallback case) Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Henryk Dembkowski 提交于
1/ add OEM paramater support for mode_type (MPC vs APC) 2/ add OEM parameter support for max_number_concurrent_device_spin_up 3/ cleanup scic_sds_controller_start_next_phy todo: hook up the amp control afe parameters into the afe init code Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: NJacek Danecki <Jacek.Danecki@intel.com> [cleaned up scic_sds_controller_start_next_phy] Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
We need to scan the OROM for signature and grab the OEM parameters. We also need to do the same for EFI. If all fails then we resort to user binary blob, and if that fails then we go to the defaults. Share the format with the create_fw utility so that all possible sources of the parameters are in-sync. Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the chipset. This is a snapshot of the first publicly available version of the driver, commit 4c1db2d0 in the 'historical' branch. git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical Signed-off-by: NMaciej Trela <maciej.trela@intel.com> Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NEdmund Nadolski <edmund.nadolski@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 01 4月, 2011 1 次提交
-
-
由 Dmitry Kravkov 提交于
To fix bugs when running offloaded FCoE/iSCSI traffic in multiple Class of Service environments. In some scenarios, traffic could stop on certain rings and eventually all traffic would stop. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2011 1 次提交
-
-
由 Michael Chan 提交于
Update 5709 mips firmware to 6.2.1a to fix iSCSI performance regression. There was an unnecessary context read in the fast path affecting performance. Update bnx2 to 2.1.6. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2011 1 次提交
-
-
由 Chris Ruffin 提交于
Fix unusued return value compiler warnings due to unchecked write() calls. [akpm@linux-foundation.org: correctly handle short writes] Signed-off-by: NChris Ruffin <cmruffin@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 1月, 2011 1 次提交
-
-
由 Michael Chan 提交于
Update MIPS firmware to 6.2.1, with improved small packet performance in RSS mode, and iSCSI CID allocation bug fix on 5708. Update driver version to 2.0.21. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 12月, 2010 3 次提交
-
-
由 Vladislav Zolotarov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Includes FCoE releated fixes in FW flows Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Zolotarov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 10月, 2010 1 次提交
-
-
由 Mark Brown 提交于
ihex firmwares can include a jump address for starting execution. Add a -j option which will cause this to be written into the generated file as a record with address zero and data consisting of the address to jump to, allowing drivers to make use of this information. This format is chosen because it most closely follows the original ihex format, though it may make more sense to write a record with length zero and the address stored as the address. The records are not omitted by default since our ihex format does not include record type information and so including additional records may lead to confusion. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the kernel Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: NBen Pfaff <blp@cs.stanford.edu> Acked-by: NHans J. Koch <hjk@linutronix.de> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 12 10月, 2010 1 次提交
-
-
由 Michael Chan 提交于
- Improved flow control and simplified interface - Use hardware RSS indirection table instead of the slower firmware- based table - Lower latency interrupt on 5709 Signed-off-by: NMichael Chan <mchan@broadcom.com> Reviewed-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 10月, 2010 5 次提交
-
-
由 Dmitry Kravkov 提交于
57712 HW supported with same set of features as for 57710/57711 Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
New firmware files for all bnx2x devices Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 8月, 2010 1 次提交
-
-
由 Jan Beulich 提交于
It doesn't like pattern and explicit rules to be on the same line, and it seems to be more picky when matching file (or really directory) names with different numbers of trailing slashes. Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Andrew Benton <b3nton@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 09 7月, 2010 1 次提交
-
-
由 Ben Hutchings 提交于
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 26 6月, 2010 1 次提交
-
-
由 Divy Le Ray 提交于
Update FW to 7.10 Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2010 1 次提交
-
-
由 Michael Chan 提交于
New firmware fixes a performance regression on small packets. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2010 1 次提交
-
-
由 Vladislav Zolotarov 提交于
Removed FW 5.2.7. Signed-off-by: NVladislav Zolotarov <vladz@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-