Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 03 12月, 2016 27 次提交
  3. 02 12月, 2016 13 次提交
    • S
      sock: reset sk_err for ICMP packets read from error queue · 83a1a1a7
      由 Soheil Hassas Yeganeh 提交于 
      Only when ICMP packets are enqueued onto the error queue,
sk_err is also set. Before f5f99309 (sock: do not set sk_err
in sock_dequeue_err_skb), a subsequent error queue read
would set sk_err to the next error on the queue, or 0 if empty.
As no error types other than ICMP set this field, sk_err should
not be modified upon dequeuing them.

Only for ICMP errors, reset the (racy) sk_err. Some applications,
like traceroute, rely on it and go into a futile busy POLLERR
loop otherwise.

In principle, sk_err has to be set while an ICMP error is queued.
Testing is_icmp_err_skb(skb_next) approximates this without
requiring a full queue walk. Applications that receive both ICMP
and other errors cannot rely on this legacy behavior, as other
errors do not set sk_err in the first place.

Fixes: f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb)
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      83a1a1a7
    • D
      Merge branch 'lwt-bpf' · f577e22c
      由 David S. Miller 提交于 
      Thomas Graf says:

====================
bpf: BPF for lightweight tunnel encapsulation

This series implements BPF program invocation from dst entries via the
lightweight tunnels infrastructure. The BPF program can be attached to
lwtunnel_input(), lwtunnel_output() or lwtunnel_xmit() and see an L3
skb as context. Programs attached to input and output are read-only.
Programs attached to lwtunnel_xmit() can modify and redirect, push headers
and redirect packets.

The facility can be used to:
 - Collect statistics and generate sampling data for a subset of traffic
   based on the dst utilized by the packet thus allowing to extend the
   existing realms.
 - Apply additional per route/dst filters to prohibit certain outgoing
   or incoming packets based on BPF filters. In particular, this allows
   to maintain per dst custom state across multiple packets in BPF maps
   and apply filters based on statistics and behaviour observed over time.
 - Attachment of L2 headers at transmit where resolving the L2 address
   is not required.
 - Possibly many more.

v3 -> v4:
 - Bumped LWT_BPF_MAX_HEADROOM from 128 to 256 (Alexei)
 - Renamed bpf_skb_push() helper to bpf_skb_change_head() to relate to
   existing bpf_skb_change_tail() helper (Alexei/Daniel)
 - Added check in __bpf_redirect_common() to verify that program added a
   link header before redirecting to a l2 device. Adding the check to
   lwt-bpf code was considered but dropped due to massive code required
   due to retrieval of net_device via per-cpu redirect buffer. A test
   case was added to cover the scenario when a program directs to an l2
   device without adding an appropriate l2 header.
   (Alexei)
 - Prohibited access to tc_classid (Daniel)
 - Collapsed bpf_verifier_ops instance for lwt in/out as they are
   identical (Daniel)
 - Some cosmetic changes

v2 -> v3:
 - Added real world sample lwt_len_hist_kern.c which demonstrates how to
   collect a histogram on packet sizes for all packets flowing through
   a number of routes.
 - Restricted output to be read-only. Since the header can no longer
   be modified, the rerouting functionality has been removed again.
 - Added test case which cover destructive modification of packet data.

v1 -> v2:
 - Added new BPF_LWT_REROUTE return code for program to indicate
   that new route lookup should be performed. Suggested by Tom.
 - New sample to illustrate rerouting
 - New patch 05: Recursion limit for lwtunnel_output for the case
   when user creates circular dst redirection. Also resolves the
   issue for ILA.
 - Fix to ensure headroom for potential future L2 header is still
   guaranteed
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f577e22c
    • T
      bpf: Add tests and samples for LWT-BPF · f74599f7
      由 Thomas Graf 提交于 
      Adds a series of tests to verify the functionality of attaching
BPF programs at LWT hooks.

Also adds a sample which collects a histogram of packet sizes which
pass through an LWT hook.

$ ./lwt_len_hist.sh
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.253.2 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00    39857.69
       1 -> 1        : 0        |                                      |
       2 -> 3        : 0        |                                      |
       4 -> 7        : 0        |                                      |
       8 -> 15       : 0        |                                      |
      16 -> 31       : 0        |                                      |
      32 -> 63       : 22       |                                      |
      64 -> 127      : 98       |                                      |
     128 -> 255      : 213      |                                      |
     256 -> 511      : 1444251  |********                              |
     512 -> 1023     : 660610   |***                                   |
    1024 -> 2047     : 535241   |**                                    |
    2048 -> 4095     : 19       |                                      |
    4096 -> 8191     : 180      |                                      |
    8192 -> 16383    : 5578023  |************************************* |
   16384 -> 32767    : 632099   |***                                   |
   32768 -> 65535    : 6575     |                                      |
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f74599f7
    • T
      bpf: BPF for lightweight tunnel infrastructure · 3a0af8fd
      由 Thomas Graf 提交于 
      Registers new BPF program types which correspond to the LWT hooks:
  - BPF_PROG_TYPE_LWT_IN   => dst_input()
  - BPF_PROG_TYPE_LWT_OUT  => dst_output()
  - BPF_PROG_TYPE_LWT_XMIT => lwtunnel_xmit()

The separate program types are required to differentiate between the
capabilities each LWT hook allows:

 * Programs attached to dst_input() or dst_output() are restricted and
   may only read the data of an skb. This prevent modification and
   possible invalidation of already validated packet headers on receive
   and the construction of illegal headers while the IP headers are
   still being assembled.

 * Programs attached to lwtunnel_xmit() are allowed to modify packet
   content as well as prepending an L2 header via a newly introduced
   helper bpf_skb_change_head(). This is safe as lwtunnel_xmit() is
   invoked after the IP header has been assembled completely.

All BPF programs receive an skb with L3 headers attached and may return
one of the following error codes:

 BPF_OK - Continue routing as per nexthop
 BPF_DROP - Drop skb and return EPERM
 BPF_REDIRECT - Redirect skb to device as per redirect() helper.
                (Only valid in lwtunnel_xmit() context)

The return codes are binary compatible with their TC_ACT_
relatives to ease compatibility.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3a0af8fd
    • T
      route: Set lwtstate for local traffic and cached input dsts · efd85700
      由 Thomas Graf 提交于 
      A route on the output path hitting a RTN_LOCAL route will keep the dst
associated on its way through the loopback device. On the receive path,
the dst_input() call will thus invoke the input handler of the route
created in the output path. Thus, lwt redirection for input must be done
for dsts allocated in the otuput path as well.

Also, if a route is cached in the input path, the allocated dst should
respect lwtunnel configuration on the nexthop as well.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      efd85700
    • T
      route: Set orig_output when redirecting to lwt on locally generated traffic · 11b3d9c5
      由 Thomas Graf 提交于 
      orig_output for IPv4 was only set for dsts which hit an input route.
Set it consistently for locally generated traffic as well to allow
lwt to continue the dst_output() path as configured by the nexthop.

Fixes: 25368623 ("lwt: Add support to redirect dst.input")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      11b3d9c5
    • D
      Merge branch 'mlx5-updates' · ee3d7c6e
      由 David S. Miller 提交于 
      Saeed Mahameed says:

====================
Mellanox 100G mlx5 updates 2016-11-29

The following series from Tariq and Roi, provides some critical fixes
and updates for the mlx5e driver.

From Tariq:
 - Fix driver coherent memory huge allocation issues by fragmenting
   completion queues, in a way that is transparent to the netdev driver by
   providing a new buffer type "mlx5_frag_buf" with the same access API.
 - Create UMR MKey per RQ to have better scalability.

From Roi:
 - Some fixes for the encap-decap support and tc flower added lately to the
   mlx5e driver.

v1->v2:
 - Fix start index in error flow of mlx5_frag_buf_alloc_node, pointed out by Eric.

This series was generated against commit:
31ac1c19 ("geneve: fix ip_hdr_len reserved for geneve6 tunnel.")
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ee3d7c6e
    • R
      net/mlx5e: Remove flow encap entry in the correct place · 5067b602
      由 Roi Dayan 提交于 
      Handling flow encap entry should be inside tc del flow
and is only relevant for offloaded eswitch TC rules.

Fixes: 11a457e9b6c1 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5067b602
    • R
      net/mlx5e: Refactor tc del flow to accept mlx5e_tc_flow instance · 961e8979
      由 Roi Dayan 提交于 
      Change the function that deletes offloaded TC rule to get
struct mlx5e_tc_flow instance which contains both the flow
handle and flow attributes. This is a cleanup needed for
downstream patches, it doesn't change any functionality.
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      961e8979
    • R
      net/mlx5e: Correct cleanup order when deleting offloaded TC rules · 86a33ae1
      由 Roi Dayan 提交于 
      According to the reverse unwinding principle, on delete time we should
first handle deletion of the steering rule and later handle the vlan
deletion from the eswitch.

Fixes: 8b32580d ("net/mlx5e: Add TC vlan action for SRIOV offloads")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      86a33ae1
    • R
      net/mlx5e: Remove redundant hashtable lookup in configure flower · 53636068
      由 Roi Dayan 提交于 
      We will never find a flow with the same cookie as cls_flower always
allocates a new flow and the cookie is the allocated memory address.

Fixes: e3a2b7ed ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      53636068
    • T
      net/mlx5e: Create UMR MKey per RQ · ec8b9981
      由 Tariq Toukan 提交于 
      In Striding RQ implementation, we used a single UMR
(User-Mode Memory Registration) memory key for all RQs.
When the product of RQs number*size gets high, we hit a
limitation of u16 field size in FW.

Here we move to using a UMR memory key per RQ, so we can
scale to any number of rings, with the maximum buffer
size in each.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ec8b9981
    • T
      net/mlx5e: Move function mlx5e_create_umr_mkey · 3608ae77
      由 Tariq Toukan 提交于 
      In next patch we are going to create a UMR MKey per RQ, we need
mlx5e_create_umr_mkey declared before mlx5e_create_rq.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3608ae77