- 25 7月, 2007 1 次提交
-
-
由 Li Yang 提交于
The patch enables statistics in ucc_geth and adds ethtool support to ucc_geth driver. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 7月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
The QE Ethernet driver was writing to the wrong register to mask interrupts. In ucc_geth_stop(), it was clearing UCCE instead of UCCM. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 25 5月, 2007 1 次提交
-
-
由 Li Yang 提交于
Remove redundant includes. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 5月, 2007 1 次提交
-
-
由 Kim Phillips 提交于
It was agreed that phy-connection-type was a better name for the interface-type property, so this patch renames it. Also, the max-speed property name was determined too generic, and is therefore eliminated in favour of phy-connection-type derivation logic. includes corrections to copyright text. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 10 5月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
The rheap allocation functions return a pointer, but the actual value is based on how the heap was initialized, and so it can be anything, e.g. an offset into a buffer. A ulong is a better representation of the value returned by the allocation functions. This patch changes all of the relevant rheap functions to use a unsigned long integers instead of a pointer. In case of an error, the value returned is a negative error code that has been cast to an unsigned long. The caller can use the IS_ERR_VALUE() macro to check for this. All code which calls the rheap functions is updated accordingly. Macros IS_MURAM_ERR() and IS_DPERR(), have been deleted in favor of IS_ERR_VALUE(). Also added error checking to rh_attach_region(). Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 02 5月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
These are all the remaining instances of get_property. Simple rename of get_property to of_get_property. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 28 4月, 2007 6 次提交
-
-
由 Kim Phillips 提交于
Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Nicu Ioan Petru 提交于
The ucc_geth_memclean function can be called before the Tx BD rings, Rx BD rings and associated socket buffers are allocated (for example if ucc_fast_init fails). The current code doesn't check if p_tx_bd_ring[i] is null, generating a kernel panic when trying to free the associated socket buffers. The function can also fail when accessing the uninitialized list_head structures ugeth->group_hash_q and ugeth->ind_hash_q. In the current implementation the list heads are initialized only when maxGroupAddrInHash and maxIndAddrInHash are positive values, although I think it's better to always initialize them. Signed-off-by: NIonut Nicu <ionut.nicu@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Reiss 提交于
Transmit on Demand: Fix spelling in config option, and make it actually enable TOD. Signed-off-by: NMichael Reiss <michael.f.reiss@freescale.com> Signed-off-by: NMichael Barkowski <michael.barkowski@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Barkowski 提交于
The rx interrupt coalescing table alignment was "guessed" to be 4, but should be 64. The size should be 8 * number of queues + 4. Verified in the MPC8323E manual. Signed-off-by: NMichael Barkowski <Michael.Barkowski@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Reiss 提交于
Based partly on the gianfar driver, this patch fixes several bugs which were causing NAPI to be completely unusable. * An IRQ is still needed in NAPI, to kick off NAPI task, and for Tx processing. Request the IRQ. * If rx_work_limit = 0 we are not complete. * While running Rx NAPI processing we must mask Rx events, including Rx busy. * ucc_geth_rx function does not need a lock. Could lead to deadlock in NAPI case. * There's no need to loop reading ucce multiple times in the ISR, so while adding the call to schedule NAPI which was not there, simplify the event processing into if-else format. * Rx Busy now kicks off NAPI processing, while still being counted as an error. Signed-off-by: NMichael Reiss <michael.f.reiss@freescale.com> Signed-off-by: NMichael Barkowski <michael.barkowski@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kim Phillips 提交于
migrate ucc_geth to use the common phylib code. There are several side effects from doing this: o deprecate 'interface' property specification present in some old device tree source files in favour of a split 'max-speed' and 'interface-type' description to appropriately match definitions in include/linux/phy.h. Note that 'interface' property is still honoured if max-speed or interface-type are not present (backward compatible). o compile-time CONFIG_UGETH_HAS_GIGA is eliminated in favour of probe time speed derivation logic. o adjust_link streamlined to only operate on maccfg2 and upsmr.r10m, instead of reapplying static initial values related to the interface-type. o Addition of UEC MDIO of_platform driver requires platform code add 'mdio' type to id list prior to calling of_platform_bus_probe (separate patch). o ucc_struct_init introduced to reduce ucc_geth_startup complexity. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 26 4月, 2007 1 次提交
-
-
由 Paul Mackerras 提交于
This reverts commit d05c7a80, which included changes which should go via other subsystem maintainers.
-
- 13 4月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 3月, 2007 1 次提交
-
-
由 Li Yang 提交于
This reverts commit 18babd38. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by: NMichael Barkowski <michael.barkowski@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 06 3月, 2007 2 次提交
-
-
由 Li Yang 提交于
Returns NETDEV_TX_BUSY when BD ring is full. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
Fix broken BD processing code. Signed-off-by: NMichael Barkowski <michael.barkowski@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 27 2月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
Update ucc_geth_probe() to use function of_get_mac_address() to obtain the MAC address. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 2月, 2007 2 次提交
-
-
由 Li Yang 提交于
IEEE-1275 defines “local-mac-address” to be a standard property name to specify preassigned network address. This patch adds support for it. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
The workaround used a long delay of 4s which caused problem when two link-changes happens at the same time. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NWu Xiaochuan <xiao-chuan.wu@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 06 2月, 2007 1 次提交
-
-
由 Ahmed S. Darwish 提交于
A kmalloc casting cleanup patch. Signed-off-by: NAhmed Darwish <darwish.07@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 19 1月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
The workqueue interface changed with David Howell's patch on 11/22/2006 (SHA 65f27f38). Several drivers were updated with that patch to handle the new interface, but ucc_geth.c was not one of them. This patch updates ucc_geth.c to support the new model. A compiler warning in set_mac_addr() was also fixed. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 12月, 2006 2 次提交
-
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Scott Wood 提交于
Fix compilation failures when building the ucc_geth driver with spinlock debugging. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 02 12月, 2006 1 次提交
-
-
由 Kim Phillips 提交于
Include of_platform header, and use new of_[un]register_platform_driver() fns. Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 22 10月, 2006 1 次提交
-
-
由 Li Yang 提交于
changes due to qe_lib changes include: o removed inclusion of platform header file o removed platform_device code, replaced with of_device o removed typedefs o uint -> u32 conversions o removed following defines: QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER, BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET because they hid sizeof/in_be32/out_be32 operations from the reader. o removed irrelevant comments, added others to resemble removed BD_ defines o const'd and uncasted all get_property() assignments bugfixes, courtesy of Scott Wood, include: - Read phy_address as a u32, not u8. - Match on type == "network" as well as compatible == "ucc_geth", as device_is_compatible() will only compare up to the length of the test string, allowing "ucc_geth_phy" to match as well. - fixes the MAC setting code in ucc_geth.c. The old code was overwriting and dereferencing random stack contents. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKim Phillips <kim.phillips@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 14 9月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 12 9月, 2006 1 次提交
-
-
由 Andy Gospodarek 提交于
As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 20 8月, 2006 1 次提交
-
-
由 Li Yang 提交于
QE(QUICC Engine) is a new generation communication coprocessor, which can be found on some of the latest Freescale PowerQUICC CPUs(e.g. MPC8360). The UCC(Unified Communications Controller) module of QE can work as gigabit Ethernet device. This patch provides driver for the device. Signed-off-by: NShlomi Gridish <gridish@freescale.com> Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-