- 16 8月, 2008 1 次提交
-
-
由 Andrew Vasquez 提交于
Greg Wettstein (greg@enjellic.com) noted: http://article.gmane.org/gmane.linux.scsi/43409 on a reboot of a previously recognized SCST target, the initiator driver would be unable to re-recognize the device as a target. It turns out that prior to the SCST software reloading and returning it's "target-capable" abilities in the PRLI payload, the HBA would be re-initialized as an initiator-only type port. Since initiators typically classify themselves as an FCP-2 capable device, both software and firmware do not perform an explicit logout during port-loss. Unfortunately, as can be seen by the failure case, when the port (now target-capable) returns, firmware performs an ADISC without a follow-on PRLI, leaving stale 'initiator-only' data in the firmware's port database. Correct the discrepancy by performing the explicit logout during the transport's request to terminate-rport-io, thus synchronizing port states and ensuring a follow-on PRLI is performed. Reported-by: NGreg Wettstein <greg@enjellic.com> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 28 7月, 2008 1 次提交
-
-
由 FUJITA Tomonori 提交于
drivers/scsi/qla2xxx/qla_attr.c: In function 'qla24xx_vport_delete': drivers/scsi/qla2xxx/qla_attr.c:1184: error: implicit declaration of function 'msleep' make[3]: *** [drivers/scsi/qla2xxx/qla_attr.o] Error 1 make[3]: *** Waiting for unfinished jobs.... Reported-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 27 7月, 2008 8 次提交
-
-
由 Andrew Vasquez 提交于
Minor fixes addressing: - rport managements during vport deletion. - acquire proper physical-ha during qla24xx_abort_command() and qla24xx_queuecommand() - do not needlessly acquire the pha for non-NPIV capable ISPs. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Joe Carnuccio 提交于
Recent ISPs have this information written at manufacturing time, so use the information. This also reduces future churn of the qla_devtbl.h file contents, as the driver can now depend on the information to be present in VPD. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Seokmann Ju 提交于
Removed repeated or unnecessary operations during vport creation/deletion. Signed-off-by: NShyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: NRavi Anand <ravi.anand@qlogic.com> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Harish Zunjarrao 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Harish Zunjarrao 提交于
This parameter counts the total number of ISP aborts during driver execution. The value is exported through a DEVICE_ATTR() off the scsi_host. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
As there's no point in adding a fixed-fudge value (originally 5 seconds), honor the user settings only. We also remove the driver's dead-callback get_rport_dev_loss_tmo function (qla2x00_get_rport_loss_tmo()). Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Seokmann Ju 提交于
Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 15 5月, 2008 3 次提交
-
-
由 Andrew Vasquez 提交于
The user-initiated dump can be a useful tool in triaging complex ISP and FC issues. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 matthias@kaehlcke.net 提交于
The semaphore vport_sem is used as a mutex. Convert it to the mutex API. Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Shyam Sundar 提交于
For Vports, the port_type should be set to FC_PORTTYPE_NPIV. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 23 4月, 2008 1 次提交
-
-
由 Hannes Reinecke 提交于
lpfc and qla2xxx overwrite the standard 'state' attribute with custom callbacks. So rename the custom attributes to 'link_state' and retain the original meaning of the 'state' attribute. Signed-off-by: NHannes Reinecke <hare@suse.de> Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: NJames Smart <James.Smart@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 20 4月, 2008 1 次提交
-
-
由 Tony Jones 提交于
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: NTony Jones <tonyj@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 4月, 2008 4 次提交
-
-
由 Harihara Kadayam 提交于
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com> Additional cleanups and Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
Rather than using a duplicate/cached value stored in the driver's internal fcport structure. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
Use generic FC transport #defines for speed values. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 08 2月, 2008 2 次提交
-
-
由 Seokmann Ju 提交于
For following fc_host specific attributes, vports rely on the pport. So, this patch changed way to access the data for those attributes so that they can access pport's. - get_host_speed (speed) - get_host_port_state (port_state) - get_host_port_type (port_type) - get_fc_host_stats Also, added PORT_SPEED_8GB case in the speed attribute for 8Gb HBAs. Signed-Off-by: NSeokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
- Drop loop-till-allocated structure of code within qla2x00_mem_alloc(). - Properly unwind deallcations of memory during failures. - Drop qla2x00_allocate_sp_pool() and qla2x00_free_sp_pool() functions as their implementations can easily be collapsed into the callers. - Defer DMA pool allocation of SFP data until requested. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 24 1月, 2008 3 次提交
-
-
由 Adrian Bunk 提交于
- make the following needlessly global code static: - qla_attr.c: qla24xx_vport_delete() - qla_attr.c: qla24xx_vport_disable() - qla_mid.c: qla24xx_allocate_vp_id() - qla_mid.c: qla24xx_find_vhost_by_name() - qla_mid.c: qla2x00_do_dpc_vp() - qla_os.c: struct qla2x00_driver_template - qla_os.c: qla2x00_stop_timer() - qla_os.c: qla2x00_mem_alloc() - qla_os.c: qla2x00_mem_free() - qla_sup.c: qla2x00_lock_nvram_access() - qla_sup.c: qla2x00_unlock_nvram_access() - qla_sup.c: qla2x00_get_nvram_word() - qla_sup.c: qla2x00_write_nvram_word() - #if 0 the following unused global functions: - qla_mbx.c: qla2x00_system_error() - qla_os.c: remove some unneeded function prototypes - removed unused functions: - qla_dbg.c: qla2x00_dump_pkt() - qla_mbx.c: qla2x00_get_serdes_params() - qla_mbx.c: qla2x00_get_idma_speed() - qla_mbx.c: qla24xx_get_vp_database() - qla_mbx.c: qla24xx_get_vp_entry() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Small modifications and Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
As the driver depends on the DPC routine to handle bottom-half loop resynchronization in order to recover from the issue-lip request. The issue_lip call is sleeping context capable, so just issue the reset function there. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Andrew Vasquez 提交于
HBAs supporting these additional counters include ISP24xx and ISP25xx type boards. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 12 1月, 2008 1 次提交
-
-
由 Andrew Vasquez 提交于
Firmware will export to software the maximum number of vports supported for any given firmware version and ISP type. Use this information rather than the current hardcoding of limitations within the driver. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 24 10月, 2007 2 次提交
-
-
由 Andrew Vasquez 提交于
The original serial-number calculations based on WWPN no longer apply to newer ISPs (ISP24xx and ISP25xx). These newer board's serial number reside in the VPD. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
Since both NVRAM and VPD regions of the flash reside on unaligned sector boundaries, during update, the driver must perform a read-modify-write operation to the composite NVRAM/VPD region. This affects ISP25xx type boards only. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 13 10月, 2007 4 次提交
-
-
由 Andrew Vasquez 提交于
Drop usage of legacy to_qla_host() macro. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Seokmann Ju 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
Original code, incorrectly passed the address-of a pointer rather than the pointer value itself. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Joe Carnuccio 提交于
Additional cleanups and Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 27 7月, 2007 1 次提交
-
-
由 Seokmann Ju 提交于
This is a patch to fix 'segmentation fault' issue which was initiated by Richard Lary <rlary@us.ibm.com>. Thanks again Richard. - on following sysfs attritute function, changes have made so that both count and offset input parameters are honored by the functions. = qla2x00_sysfs_read_nvram() = qla2x00_sysfs_read_vpd() - made changes so that NVRAM data to be cached to minimize H/W accesses during agent querying of the driver's. Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 20 7月, 2007 3 次提交
-
-
由 Andrew Vasquez 提交于
Large code-reuse from ISP24xx, consolidate RISC memory extraction routines during firmware-dump. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
In preparation for new ISP types. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
In preparation for new ISP types. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 15 7月, 2007 1 次提交
-
-
由 Seokmann Ju 提交于
Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: NSeokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 12 7月, 2007 2 次提交
-
-
由 Zhang Rui 提交于
Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tejun Heo 提交于
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 2月, 2007 2 次提交
-
-
由 Andrew Vasquez 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andrew Vasquez 提交于
Non-ISP24xx cards must have a loop-id in order to query host statistics. Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-