The usbmouse and usbkbd modules are not supposed to be used with regular USB
mice and keyboards. Make them depend on EMBEDDED to prevent them from being
built and loaded on non-EMBEDDED configs.
Signed-off-by: NParag Warudkar <parag.lkml@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This is a cleanup of hiddev and fixes the following issues:

- thread safety by locking in read & ioctl, introducing a per device mutex
- race between ioctl and disconnect, introducing a flag and locking
  in form of a per low level device mutex
- race between open and other methods, making sure only successfully
  opened devices are put on the list, changing order of events
- range checking both upper and lower limits of the minor range
- make sure further calls to open fail for unplugged devices even if
  the device still has opened files
- error checking for low level open
- possible loss of wakeup events, using standard waiting macros
- race in initialisation by moving registration after full initialisation
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I have implemented Force Feedback driver for another "GreeAsia" based device
(0e8f:0012 "GreenAsia Inc. USB Joystick"). The functionality was tested with
MANTA Warior MM816 and SpeedLink Strike2 SL-6635 and fftest software -
everything seems to work right.
Signed-off-by: NLukasz Lubojanski <lukasz@lubojanski.info>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix the obnoxious "default y" for all the "special" HID code, which forces folk
with EMBEDDED defined to manually override that inappropriate default for
almost 20 choices.  The general policy is against "default y"; it should apply
here too.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We need to properly set parent of the hidraw device (which is the
corresponding physical device itself) in order to hidraw devices not
end up under virtual device tree.
Reported-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Allow adding new devices to the hid drivers on the fly without
a need of kernel recompilation.

Now, one can test a driver e.g. by:
echo 0003:045E:00F0.0003 > ../generic-usb/unbind
echo 0003 045E 00F0 > new_id
from some driver subdir.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We might sleep, so no problem to use GFP_KERNEL.

While at it bring the function to coding style.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Use usb_endpoint_xfer_int() instead of direct use of constants.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move usbhid specific flags from global hid.h into local usbhid.h.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added quirks for the N-Trig digitizer.
Signed-off-by: NRafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The hiddev interface provides ioctl() calls which can be used
to obtain phys and raw name of the underlying device.

Add the corresponding support also into hidraw.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

CC: Jiri Kosina <jkosina@suse.cz>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch (as1146c) makes usbhid automatically call usbhid_set_leds()
for any device that supports the keyboard boot protocol.

In theory this should be perfectly safe.  BIOSes send the LED output
report as part of their normal device initialization, so any keyboard
device supporting the boot protocol has to be able to handle it.

As a side effect, the hid-dell and hid-bright drivers are no longer
needed, and the Logitech keyboard driver can be removed from hid-lg.

CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When computing the maximal buffer size needed, we must take into
account that not only input reports can be numbered.

Pointed out in bugzilla #10467
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The mouse interface on unibody macbooks is going to be handled by
bcm59743 driver in 2.6.29.
Reported-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

those two functions only used in that C file
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_NR_CPUS will be defined for all arch's whether SMP or not, but
it may not have made it into all arches yet.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce memory usage, use new API.

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).

(Changes to powernow-k* by <travis>.)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Day <ncmike@ncultra.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

These two IOMMUs can implement the current version of this API. So
select the API if one or both of these IOMMU drivers is selected.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This API can be used by KVM for accessing different types of IOMMUs to
do device passthrough to guests. Beside that this API can also be used
by device drivers to map non-linear host memory into dma-linear
addresses to prevent sgather-gather DMA. UIO may be another user for
this API.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

When domain is related to multiple iommus, need to check if the minimum agaw is sufficient for the mapped memory
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

These APIs are used by KVM to use VT-d
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

vm_domid won't be set in context, find available domain id for a device from its iommu.

For a virtual machine domain, a default agaw will be set, and skip top levels of page tables for iommu which has less agaw than default.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

virtual machine domain is different from native DMA-API domain, implement separate allocation and free functions for virtual machine domain.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Because virtual machine domain may have multiple devices from different iommus, it cannot use __iommu_flush_cache.

In some common low level functions, use domain_flush_cache instead of __iommu_flush_cache. On the other hand, in some functions, iommu can is specified or domain cannot be got, still use __iommu_flush_cache
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add iommu reference count in domain, and add a lock to protect iommu setting including iommu_bmp, iommu_count and iommu_coherency.

virtual machine domain may have multiple devices from different iommus, so it needs to do more things when add/remove domain device info. Thus implement separate these functions for virtual machine domain.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add this flag for VT-d used in virtual machine, like KVM.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

In dmar_domain, more than one iommus may be included in iommu_bmp. Due to "Coherency" capability may be different across iommus, set this variable to indicate iommu access is coherent or not. Only when all related iommus in a dmar_domain are all coherent, iommu access of this domain is coherent.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

"SAGAW" capability may be different across iommus. Use a default agaw, but if default agaw is not supported in some iommus, choose a less supported agaw.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

In order to support assigning multiple devices from different iommus to a domain, iommu bitmap is used to keep all iommus the domain are related to.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

deferred_flush[] uses the iommu seq_id to index, so its iommu is fixed and can get it from g_iommus.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>