- 18 2月, 2009 1 次提交
-
-
由 Wenji Huang 提交于
Impact: cleanup Fix incorrect hint message in code and typos in comments. Signed-off-by: NWenji Huang <wenji.huang@oracle.com> Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
- 05 2月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Impact: cleanup Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 1月, 2009 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Impact: cleanup Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 1月, 2009 3 次提交
-
-
由 Steven Rostedt 提交于
Impact: better data for wakeup tracer This patch adds the wakeup and schedule calls that are used by the scheduler tracer to make the wakeup tracer more readable. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Impact: add option to trace all tasks or just RT tasks The current wakeup tracer only traces RT task wakeups. This is fine for those interested in wake up timings of RT tasks, but it is useless for those that are interested in the causes of long wakeups for non RT tasks. This patch creates a "wakeup_rt" to implement the tracing of just RT tasks (as the current "wakeup" does). And makes "wakeup" now trace all tasks as an average developer would expect. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Impact: fix to erased trace output To try not to have the outputing of a trace interfere with the wakeup tracer, it would disable tracing while the output was printing. But if a trace had started when it was disabled, it can show a partial trace. To try to solve this, on closing of the tracer, it would clear the trace buffer. The latency tracers (wakeup and irqsoff) have two buffers. One for recording and one for holding the max trace that is printed. The clearing of the trace above should only affect the recording buffer. But for some reason it would move the erased trace to the print buffer. Probably due to a race with the closing of the trace and the saving ofhe max race. The above is all pretty useless, and if the user does not want the printing of the trace to be traced itself, then the user can manual disable tracing. This patch removes all the code that tries to keep the output of the tracer from modifying the trace. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 1月, 2009 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: trace max latencies on start of latency tracing This patch sets the max latency to zero whenever one of the irq variant tracers or the wakeup tracer is set to current tracer. Most developers expect to see output when starting up a latency tracer. But since the max_latency is already set to max, and it takes a latency greater than max_latency to be recorded, there is no trace. This is not the expected behavior and has even confused myself. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 1月, 2009 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: trace max latencies on start of latency tracing This patch sets the max latency to zero whenever one of the irq variant tracers or the wakeup tracer is set to current tracer. Most developers expect to see output when starting up a latency tracer. But since the max_latency is already set to max, and it takes a latency greater than max_latency to be recorded, there is no trace. This is not the expected behavior and has even confused myself. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 12月, 2008 1 次提交
-
-
由 Peter Zijlstra 提交于
Impact: extend the wakeup tracepoint with the info whether the wakeup was real Add the information needed to distinguish 'real' wakeups from 'false' wakeups. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 11月, 2008 1 次提交
-
-
由 Frederic Weisbecker 提交于
Impact: extend the ->init() method with the ability to fail This bring a way to know if the initialization of a tracer successed. A tracer must return 0 on success and a traditional error (ie: -ENOMEM) if it fails. If a tracer fails to init, it is free to print a detailed warn. The tracing api will not and switch to a new tracer will just return the error from the init callback. Note: this will be used for the return tracer. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 11月, 2008 2 次提交
-
-
由 Steven Rostedt 提交于
Impact: remove obsolete variable in trace_array structure With the new start / stop method of ftrace, the ctrl variable in the trace_array structure is now obsolete. Remove it. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
Impact: Remove the ctrl_update tracer method With the new quick start/stop method of tracing, the ctrl_update method is out of date. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 11月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: change where tracing is started up and stopped Currently, when a new tracer is selected via echo'ing a tracer name into the current_tracer file, the startup is only done if tracing_enabled is set to one. If tracing_enabled is changed to zero (by echo'ing 0 into the tracing_enabled file) a full shutdown is performed. The full startup and shutdown of a tracer can be expensive and the user can lose out traces when echo'ing in 0 to the tracing_enabled file, because the process takes too long. There can also be places that the user would like to start and stop the tracer several times and doing the full startup and shutdown of a tracer might be too expensive. This patch performs the full startup and shutdown when a tracer is selected. It also adds a way to do a quick start or stop of a tracer. The quick version is just a flag that prevents the tracing from taking place, but the overhead of the code is still there. For example, the startup of a tracer may enable tracepoints, or enable the function tracer. The stop and start will just set a flag to have the tracer ignore the calls when the tracepoint or function trace is called. The overhead of the tracer may still be present when the tracer is stopped, but no tracing will occur. Setting the tracer to the 'nop' tracer (or any other tracer) will perform the shutdown of the tracer which will disable the tracepoint or disable the function tracer. The tracing_enabled file will simply start or stop tracing. This change is all internal. The end result for the user should be the same as before. If tracing_enabled is not set, no trace will happen. If tracing_enabled is set, then the trace will happen. The tracing_enabled variable is static between tracers. Enabling tracing_enabled and going to another tracer will keep tracing_enabled enabled. Same is true with disabling tracing_enabled. This patch will now provide a fast start/stop method to the users for enabling or disabling tracing. Note: There were two methods to the struct tracer that were never used: The methods start and stop. These were to be used as a hook to the reading of the trace output, but ended up not being necessary. These two methods are now used to enable the start and stop of each tracer, in case the tracer needs to do more than just not write into the buffer. For example, the irqsoff tracer must stop recording max latencies when tracing is stopped. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 11月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Impact: use new, consolidated APIs in ftrace plugins This patch replaces the schedule safe preempt disable code with the ftrace_preempt_disable() and ftrace_preempt_enable() safe functions. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 10月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Due to confusion between the ftrace infrastructure and the gcc profiling tracer "ftrace", this patch renames the config options from FTRACE to FUNCTION_TRACER. The other two names that are offspring from FTRACE DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same. This patch was generated mostly by script, and partially by hand. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 10月, 2008 3 次提交
-
-
由 Steven Rostedt 提交于
With the new ring buffer infrastructure in ftrace, I'm trying to make ftrace a little more light weight. This patch converts a lot of the local_irq_save/restore into preempt_disable/enable. The original preempt count in a lot of cases has to be sent in as a parameter so that it can be recorded correctly. Some places were recording it incorrectly before anyway. This is also laying the ground work to make ftrace a little bit more reentrant, and remove all locking. The function tracers must still protect from reentrancy. Note: All the function tracers must be careful when using preempt_disable. It must do the following: resched = need_resched(); preempt_disable_notrace(); [...] if (resched) preempt_enable_no_resched_notrace(); else preempt_enable_notrace(); The reason is that if this function traces schedule() itself, the preempt_enable_notrace() will cause a schedule, which will lead us into a recursive failure. If we needed to reschedule before calling preempt_disable, we should have already scheduled. Since we did not, this is most likely that we should not and are probably inside a schedule function. If resched was not set, we still need to catch the need resched flag being set when preemption was off and the if case at the end will catch that for us. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
This patch ports ftrace over to the new ring buffer. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mathieu Desnoyers 提交于
Porting the trace_mark() used by ftrace to tracepoints. (cleanup) Changelog : - Change error messages : marker -> tracepoint [ mingo@elte.hu: conflict resolutions ] Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: N'Peter Zijlstra' <peterz@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 7月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
On Wed, 16 Jul 2008, Vegard Nossum wrote: > When booting 4d3702b6, I got this huge thing: > > Testing tracer wakeup: <4>------------[ cut here ]------------ > WARNING: at kernel/lockdep.c:2731 check_flags+0x123/0x160() > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.26-crashing-02127-g4d3702b6 #30 > [<c015c349>] warn_on_slowpath+0x59/0xb0 > [<c01276c6>] ? ftrace_call+0x5/0x8 > [<c012d800>] ? native_read_tsc+0x0/0x20 > [<c0158de2>] ? sub_preempt_count+0x12/0xf0 > [<c01814eb>] ? trace_hardirqs_off+0xb/0x10 > [<c0182fbc>] ? __lock_acquire+0x2cc/0x1120 > [<c01814eb>] ? trace_hardirqs_off+0xb/0x10 > [<c01276af>] ? mcount_call+0x5/0xa > [<c017ff53>] check_flags+0x123/0x160 > [<c0183e61>] lock_acquire+0x51/0xd0 > [<c01276c6>] ? ftrace_call+0x5/0x8 > [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0 > [<c01a8d45>] ? ftrace_record_ip+0xf5/0x220 > [<c02d5413>] ? debug_locks_off+0x3/0x50 > [<c01a8d45>] ftrace_record_ip+0xf5/0x220 > [<c01276af>] mcount_call+0x5/0xa > [<c02d5418>] ? debug_locks_off+0x8/0x50 > [<c017ff27>] check_flags+0xf7/0x160 > [<c0183e61>] lock_acquire+0x51/0xd0 > [<c01276c6>] ? ftrace_call+0x5/0x8 > [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0 > [<c01affcd>] ? wakeup_tracer_call+0x6d/0xf0 > [<c01625e2>] ? _local_bh_enable+0x62/0xb0 > [<c0158ddd>] ? sub_preempt_count+0xd/0xf0 > [<c01affcd>] wakeup_tracer_call+0x6d/0xf0 > [<c0162724>] ? __do_softirq+0xf4/0x110 > [<c01afff1>] ? wakeup_tracer_call+0x91/0xf0 > [<c01276c6>] ftrace_call+0x5/0x8 > [<c0162724>] ? __do_softirq+0xf4/0x110 > [<c0158de2>] ? sub_preempt_count+0x12/0xf0 > [<c01625e2>] _local_bh_enable+0x62/0xb0 > [<c0162724>] __do_softirq+0xf4/0x110 > [<c01627ed>] do_softirq+0xad/0xb0 > [<c0162a15>] irq_exit+0xa5/0xb0 > [<c013a506>] smp_apic_timer_interrupt+0x66/0xa0 > [<c02d3fac>] ? trace_hardirqs_off_thunk+0xc/0x10 > [<c0127449>] apic_timer_interrupt+0x2d/0x34 > [<c018007b>] ? find_usage_backwards+0xb/0xf0 > [<c0613a09>] ? _spin_unlock_irqrestore+0x69/0x80 > [<c014ef32>] tg_shares_up+0x132/0x1d0 > [<c014d2a2>] walk_tg_tree+0x62/0xa0 > [<c014ee00>] ? tg_shares_up+0x0/0x1d0 > [<c014a860>] ? tg_nop+0x0/0x10 > [<c015499d>] update_shares+0x5d/0x80 > [<c0154a2f>] try_to_wake_up+0x6f/0x280 > [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0 > [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0 > [<c0154c94>] wake_up_process+0x14/0x20 > [<c01725f6>] kthread_create+0x66/0xb0 > [<c0195400>] ? do_stop+0x0/0x200 > [<c0195320>] ? __stop_machine_run+0x30/0xb0 > [<c0195340>] __stop_machine_run+0x50/0xb0 > [<c0195400>] ? do_stop+0x0/0x200 > [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0 > [<c061242d>] ? mutex_unlock+0xd/0x10 > [<c01953cc>] stop_machine_run+0x2c/0x60 > [<c01a94d3>] unregister_ftrace_function+0x103/0x180 > [<c01b0517>] stop_wakeup_tracer+0x17/0x60 > [<c01b056f>] wakeup_tracer_ctrl_update+0xf/0x30 > [<c01ab8d5>] trace_selftest_startup_wakeup+0xb5/0x130 > [<c01ab950>] ? trace_wakeup_test_thread+0x0/0x70 > [<c01aadf5>] register_tracer+0x135/0x1b0 > [<c0877d02>] init_wakeup_tracer+0xd/0xf > [<c085d437>] kernel_init+0x1a9/0x2ce > [<c061397b>] ? _spin_unlock_irq+0x3b/0x60 > [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10 > [<c0877cf5>] ? init_wakeup_tracer+0x0/0xf > [<c0182646>] ? trace_hardirqs_on_caller+0x126/0x180 > [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10 > [<c01269c8>] ? restore_nocheck_notrace+0x0/0xe > [<c085d28e>] ? kernel_init+0x0/0x2ce > [<c085d28e>] ? kernel_init+0x0/0x2ce > [<c01275fb>] kernel_thread_helper+0x7/0x10 > ======================= > ---[ end trace a7919e7f17c0a725 ]--- > irq event stamp: 579530 > hardirqs last enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10 > hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10 > softirqs last enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110 > softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0 > irq event stamp: 579530 > hardirqs last enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10 > hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10 > softirqs last enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110 > softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0 > PASSED > > Incidentally, the kernel also hung while I was typing in this report. Things get weird between lockdep and ftrace because ftrace can be called within lockdep internal code (via the mcount pointer) and lockdep can be called with ftrace (via spin_locks). Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Tested-by: NVegard Nossum <vegard.nossum@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 7月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
Enabling the wakeup tracer before enabling the function tracing causes some strange results due to the dynamic enabling of the functions. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 5月, 2008 1 次提交
-
-
由 Steven Rostedt 提交于
This patch adds function tracing to the functions that are called on the CPU of the task being traced. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 24 5月, 2008 10 次提交
-
-
由 Mathieu Desnoyers 提交于
Porting ftrace to the marker infrastructure. Don't need to chain to the wakeup tracer from the sched tracer, because markers support multiple probes connected. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
printk called from wakeup critical timings and irqs off can cause deadlocks since printk might do a wakeup itself. If the call to printk happens with the runqueue lock held, it can deadlock. This patch protects the printk from being called in trace irqs off with a test to see if the runqueue for the current CPU is locked. If it is locked, the printk is skipped. The wakeup always holds the runqueue lock, so the printk is simply removed. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
now that we have a kbuild method for notrace, no need to pollute the C code with the annotations. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
A new check was added in the ftrace function that wont trace if the CPU trace buffer is disabled. Unfortunately, other tracers used ftrace() to write to the buffer after they disabled it. The new disable check makes these calls into a nop. This patch changes the __ftrace that is called without the check into a new api for the other tracers to use, called "trace_function". The other tracers use this interface instead when the trace CPU buffer is already disabled. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
rename and uninline now() to ftrace_now(). Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
factor out code and clean it up. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch adds the tracer that tracks the wakeup latency of the highest priority waking task. "wakeup" is added to /debugfs/tracing/available_tracers Also added to /debugfs/tracing tracing_max_latency holds the current max latency for the wakeup wakeup_thresh if set to other than zero, a log will be recorded for every wakeup that takes longer than the number entered in here (usecs for all counters) (deletes previous trace) Examples: (with ftrace_enabled = 0) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 Signed-off-by: NIngo Molnar <mingo@elte.hu> -------------------------------------------------------------------- latency: 26 us, #2/2, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/0-3 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / quilt-8551 0d..3 0us+: wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>) quilt-8551 0d..4 26us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>) vim:ft=help ============ (with ftrace_enabled = 1) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 -------------------------------------------------------------------- latency: 36 us, #45/45, CPU#0 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/1-5 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / bash-10653 1d..3 0us : wake_up_process+0x15/0x17 <ffffffff80233e80> (sched_exec+0xc9/0x100 <ffffffff80235343>) bash-10653 1d..3 1us : try_to_wake_up+0x271/0x2e7 <ffffffff80233dcf> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>) bash-10653 1d..2 2us : try_to_wake_up+0x296/0x2e7 <ffffffff80233df4> (update_rq_clock+0x9/0x20 <ffffffff802303f3>) bash-10653 1d..2 2us : update_rq_clock+0x1e/0x20 <ffffffff80230408> (__update_rq_clock+0xc/0x90 <ffffffff80230366>) bash-10653 1d..2 3us : __update_rq_clock+0x1b/0x90 <ffffffff80230375> (sched_clock+0x9/0x29 <ffffffff80214529>) bash-10653 1d..2 4us : try_to_wake_up+0x2a6/0x2e7 <ffffffff80233e04> (activate_task+0xc/0x3f <ffffffff8022ffca>) bash-10653 1d..2 4us : activate_task+0x2d/0x3f <ffffffff8022ffeb> (enqueue_task+0xe/0x66 <ffffffff8022ff66>) bash-10653 1d..2 5us : enqueue_task+0x5b/0x66 <ffffffff8022ffb3> (enqueue_task_rt+0x9/0x3c <ffffffff80233351>) bash-10653 1d..2 6us : try_to_wake_up+0x2ba/0x2e7 <ffffffff80233e18> (check_preempt_wakeup+0x12/0x99 <ffffffff80234f84>) [...] bash-10653 1d..5 33us : tracing_record_cmdline+0xcf/0xd4 <ffffffff80338aad> (_spin_unlock+0x9/0x33 <ffffffff8048d3ec>) bash-10653 1d..5 34us : _spin_unlock+0x19/0x33 <ffffffff8048d3fc> (sub_preempt_count+0xc/0x7a <ffffffff8023309e>) bash-10653 1d..4 35us : wakeup_sched_switch+0x65/0x2ff <ffffffff80339f66> (_spin_lock_irqsave+0xc/0xa9 <ffffffff8048d08b>) bash-10653 1d..4 35us : _spin_lock_irqsave+0x19/0xa9 <ffffffff8048d098> (add_preempt_count+0xe/0x77 <ffffffff8023311a>) bash-10653 1d..4 36us : sched_switch_callback+0x73/0x81 <ffffffff80338d2f> (schedule+0x483/0x6d5 <ffffffff8048b3ee>) vim:ft=help ============ The [...] was added here to not waste your email box space. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-