Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 12 8月, 2020 1 次提交
    • S
      xfrm: Fix crash when the hold queue is used. · ac001dc5
      由 Steffen Klassert 提交于 
      [ Upstream commit 101dde4207f1daa1fda57d714814a03835dccc3f ]

The commits "xfrm: Move dst->path into struct xfrm_dst"
and "net: Create and use new helper xfrm_dst_child()."
changed xfrm bundle handling under the assumption
that xdst->path and dst->child are not a NULL pointer
only if dst->xfrm is not a NULL pointer. That is true
with one exception. If the xfrm hold queue is used
to wait until a SA is installed by the key manager,
we create a dummy bundle without a valid dst->xfrm
pointer. The current xfrm bundle handling crashes
in that case. Fix this by extending the NULL check
of dst->xfrm with a test of the DST_XFRM_QUEUE flag.

Fixes: 0f6c480f ("xfrm: Move dst->path into struct xfrm_dst")
Fixes: b92cf4aa ("net: Create and use new helper xfrm_dst_child().")
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
      ac001dc5
  3. 07 7月, 2020 1 次提交
  5. 16 4月, 2020 1 次提交
  7. 15 4月, 2020 1 次提交
  9. 27 12月, 2019 4 次提交
    • M
      xfrm: Honor original L3 slave device in xfrmi policy lookup · 50a5434a
      由 Martin Willi 提交于 
      mainline inclusion
from mainline-5.1
commit 025c65e1
category: bugfix
bugzilla: 14338
CVE: NA

-------------------------------------------------

If an xfrmi is associated to a vrf layer 3 master device,
xfrm_policy_check() fails after traffic decapsulation. The input
interface is replaced by the layer 3 master device, and hence
xfrmi_decode_session() can't match the xfrmi anymore to satisfy
policy checking.

Extend ingress xfrmi lookup to honor the original layer 3 slave
device, allowing xfrm interfaces to operate within a vrf domain.

Fixes: f203b76d ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: NMartin Willi <martin@strongswan.org>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NShijie Luo <luoshijie1@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
      50a5434a
    • C
      xfrm: clean up xfrm protocol checks · 63277674
      由 Cong Wang 提交于 
      mainline inclusion
from mainline-5.1
commit dbb2483b
category: bugfix
bugzilla: 14337
CVE: NA

-------------------------------------------------

In commit 6a53b759 ("xfrm: check id proto in validate_tmpl()")
I introduced a check for xfrm protocol, but according to Herbert
IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so
it should be removed from validate_tmpl().

And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific
protocols, this is why xfrm_state_flush() could still miss
IPPROTO_ROUTING, which leads that those entries are left in
net->xfrm.state_all before exit net. Fix this by replacing
IPSEC_PROTO_ANY with zero.

This patch also extracts the check from validate_tmpl() to
xfrm_id_proto_valid() and uses it in parse_ipsecrequest().
With this, no other protocols should be added into xfrm.

Fixes: 6a53b759 ("xfrm: check id proto in validate_tmpl()")
Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NShijie Luo <luoshijie1@huawei.com>
Reviewed-by: NYue Haibing <yuehaibing@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
      63277674
    • T
      kabi: reserve space for network subsystem related structure · 148a9c4f
      由 Tan Xiaojun 提交于 
      hulk inclusion
category: feature
bugzilla: 13276
CVE: NA

-------------------------------

Reserve space for the structure in network subsystem.
Signed-off-by: NTan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
      148a9c4f
    • C
      xfrm: destroy xfrm_state synchronously on net exit path · d985029e
      由 Cong Wang 提交于 
      mainline inclusion
from mainline-5.0
commit f75a2804da39
category: bugfix
bugzilla: 10919
CVE: NA

-------------------------------------------------

xfrm_state_put() moves struct xfrm_state to the GC list
and schedules the GC work to clean it up. On net exit call
path, xfrm_state_flush() is called to clean up and
xfrm_flush_gc() is called to wait for the GC work to complete
before exit.

However, this doesn't work because one of the ->destructor(),
ipcomp_destroy(), schedules the same GC work again inside
the GC work. It is hard to wait for such a nested async
callback. This is also why syzbot still reports the following
warning:

 WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351
 ...
  ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153
  cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551
  process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
  worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
  kthread+0x357/0x430 kernel/kthread.c:246
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

In fact, it is perfectly fine to bypass GC and destroy xfrm_state
synchronously on net exit call path, because it is in process context
and doesn't need a work struct to do any blocking work.

This patch introduces xfrm_state_put_sync() which simply bypasses
GC, and lets its callers to decide whether to use this synchronous
version. On net exit path, xfrm_state_fini() and
xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is
blocking, it can use xfrm_state_put_sync() directly too.

Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to
reflect this change.

Fixes: b48c05ab ("xfrm: Fix warning in xfrm6_tunnel_net_exit.")
Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NZhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: NWenan Mao <maowenan@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
      d985029e
  11. 29 12月, 2018 1 次提交
  13. 20 7月, 2018 1 次提交
    • B
      xfrm: Remove xfrmi interface ID from flowi · bc56b334
      由 Benedict Wong 提交于 
      In order to remove performance impact of having the extra u32 in every
single flowi, this change removes the flowi_xfrm struct, prefering to
take the if_id as a method parameter where needed.

In the inbound direction, if_id is only needed during the
__xfrm_check_policy() function, and the if_id can be determined at that
point based on the skb. As such, xfrmi_decode_session() is only called
with the skb in __xfrm_check_policy().

In the outbound direction, the only place where if_id is needed is the
xfrm_lookup() call in xfrmi_xmit2(). With this change, the if_id is
directly passed into the xfrm_lookup_with_ifid() call. All existing
callers can still call xfrm_lookup(), which uses a default if_id of 0.

This change does not change any behavior of XFRMIs except for improving
overall system performance via flowi size reduction.

This change has been tested against the Android Kernel Networking Tests:

https://android.googlesource.com/kernel/tests/+/master/net/testSigned-off-by: NBenedict Wong <benedictwong@google.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      bc56b334
  15. 11 7月, 2018 1 次提交
  17. 25 6月, 2018 1 次提交
    • F
      xfrm: policy: remove pcpu policy cache · e4db5b61
      由 Florian Westphal 提交于 
      Kristian Evensen says:
  In a project I am involved in, we are running ipsec (Strongswan) on
  different mt7621-based routers. Each router is configured as an
  initiator and has around ~30 tunnels to different responders (running
  on misc. devices). Before the flow cache was removed (kernel 4.9), we
  got a combined throughput of around 70Mbit/s for all tunnels on one
  router. However, we recently switched to kernel 4.14 (4.14.48), and
  the total throughput is somewhere around 57Mbit/s (best-case). I.e., a
  drop of around 20%. Reverting the flow cache removal restores, as
  expected, performance levels to that of kernel 4.9.

When pcpu xdst exists, it has to be validated first before it can be
used.

A negative hit thus increases cost vs. no-cache.

As number of tunnels increases, hit rate decreases so this pcpu caching
isn't a viable strategy.

Furthermore, the xdst cache also needs to run with BH off, so when
removing this the bh disable/enable pairs can be removed too.

Kristian tested a 4.14.y backport of this change and reported
increased performance:

  In our tests, the throughput reduction has been reduced from around -20%
  to -5%. We also see that the overall throughput is independent of the
  number of tunnels, while before the throughput was reduced as the number
  of tunnels increased.
Reported-by: NKristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      e4db5b61
  19. 23 6月, 2018 3 次提交
  21. 19 6月, 2018 1 次提交
  23. 15 5月, 2018 2 次提交
  25. 16 4月, 2018 1 次提交
  27. 30 3月, 2018 1 次提交
  29. 01 3月, 2018 1 次提交
  31. 18 1月, 2018 1 次提交
  33. 21 12月, 2017 1 次提交
  35. 20 12月, 2017 3 次提交
  37. 19 12月, 2017 1 次提交
  39. 30 11月, 2017 4 次提交
    • D
      xfrm: Move dst->path into struct xfrm_dst · 0f6c480f
      由 David Miller 提交于 
      The first member of an IPSEC route bundle chain sets it's dst->path to
the underlying ipv4/ipv6 route that carries the bundle.

Stated another way, if one were to follow the xfrm_dst->child chain of
the bundle, the final non-NULL pointer would be the path and point to
either an ipv4 or an ipv6 route.

This is largely used to make sure that PMTU events propagate down to
the correct ipv4 or ipv6 route.

When we don't have the top of an IPSEC bundle 'dst->path == dst'.

Move it down into xfrm_dst and key off of dst->xfrm.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NEric Dumazet <edumazet@google.com>
      0f6c480f
    • D
      xfrm: Move child route linkage into xfrm_dst. · b6ca8bd5
      由 David Miller 提交于 
      XFRM bundle child chains look like this:

	xdst1 --> xdst2 --> xdst3 --> path_dst

All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL.
The final child pointer in the chain, here called 'path_dst', is some
other kind of route such as an ipv4 or ipv6 one.

The xfrm output path pops routes, one at a time, via the child
pointer, until we hit one which has a dst->xfrm pointer which
is NULL.

We can easily preserve the above mechanisms with child sitting
only in the xfrm_dst structure.  All children in the chain
before we break out of the xfrm_output() loop have dst->xfrm
non-NULL and are therefore xfrm_dst objects.

Since we break out of the loop when we find dst->xfrm NULL, we
will not try to dereference 'dst' as if it were an xfrm_dst.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b6ca8bd5
    • D
      ipsec: Create and use new helpers for dst child access. · 45b018be
      由 David Miller 提交于 
      This will make a future change moving the dst->child pointer less
invasive.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NEric Dumazet <edumazet@google.com>
      45b018be
    • D
      net: Create and use new helper xfrm_dst_child(). · b92cf4aa
      由 David Miller 提交于 
      Only IPSEC routes have a non-NULL dst->child pointer.  And IPSEC
routes are identified by a non-NULL dst->xfrm pointer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b92cf4aa
  41. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  43. 25 9月, 2017 4 次提交
  45. 31 8月, 2017 1 次提交
  47. 11 8月, 2017 1 次提交
    • L
      net: xfrm: support setting an output mark. · 077fbac4
      由 Lorenzo Colitti 提交于 
      On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.

Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.

This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:

1. The xfrm mark is used to match xfrm policies and states, while
   the xfrm output mark is used to set the mark (and influence
   the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
   the originating socket or transformed packet, but the output
   mark is arbitrary and depends only on the state.

The use of a separate mark provides additional flexibility. For
example:

- A packet subject to two transforms (e.g., transport mode inside
  tunnel mode) can have two different output marks applied to it,
  one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
  emitted by an IPsec tunnel can be routed based on a mark that
  is determined by the tunnel, not by the marks of the
  unencrypted packets.
- Support for setting the output marks can be introduced without
  breaking any existing setups that employ both mark-based
  routing and xfrm tunnel mode. Simply changing the code to use
  the xfrm mark for routing output packets could xfrm mark could
  change behaviour in a way that breaks these setups.

If the output mark is unspecified or set to zero, the mark is not
set or changed.

Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      077fbac4
  49. 02 8月, 2017 2 次提交