The vmbus/hyperv interrupt handling is another complete trainwreck and
probably the worst of all currently in tree.

If CONFIG_HYPERV=y then the interrupt delivery to the vmbus happens
via the direct HYPERVISOR_CALLBACK_VECTOR. So far so good, but:

  The driver requests first a normal device interrupt. The only reason
  to do so is to increment the interrupt stats of that device
  interrupt. For no reason it also installs a private flow handler.

  We have proper accounting mechanisms for direct vectors, but of
  course it's too much effort to add that 5 lines of code.

  Aside of that the alloc_intr_gate() is not protected against
  reallocation which makes module reload impossible.

Solution to the problem is simple to rip out the whole mess and
implement it correctly.

First of all move all that code to arch/x86/kernel/cpu/mshyperv.c and
merily install the HYPERVISOR_CALLBACK_VECTOR with proper reallocation
protection and use the proper direct vector accounting mechanism.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linuxdrivers <devel@linuxdriverproject.org>
Cc: x86 <x86@kernel.org>
Link: http://lkml.kernel.org/r/20140223212739.028307673@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.

First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds.  For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.

Second, there are ordering dependencies between those files that always
have to be met.  Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there.  And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds.  That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This moves the ringbuffer bus attributes to the dev_groups structure,
deletes the now unneeded struct hv_device_info, and removes some now
unused functions, and variables as everything is now moved to the
dev_groups structure, dev_attrs is no longer needed.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's no longer needed, and the struct hv_ring_buffer_debug_info
structure shouldn't be "global" so move it to the local .h file instead.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's only used once, only contains 2 function calls, so just make those
calls directly, deleting the function, and the now unneeded structure
entirely.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "client_monitor_conn_id" and "server_monitor_conn_id" bus
attributes to the dev_groups structure, removing the need for it to be
in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "client_monitor_latency" and "server_monitor_latency" bus
attributes to the dev_groups structure, removing the need for it to be
in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "client_monitor_pending" and "server_monitor_pending" bus
attributes to the dev_groups structure, removing the need for it to be
in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "device_id" bus attribute to the dev_groups structure,
removing the need for it to be in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "class_id" bus attribute to the dev_groups structure,
removing the need for it to be in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "state" bus attribute to the dev_groups structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "state" bus attribute to the dev_groups structure,
removing the need for it to be in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This moves the "state" bus attribute to the dev_groups structure,
removing the need for it to be in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is the first in a series that moves the hv bus code to use the
dev_groups field instead of dev_attrs, as dev_attrs is going away in future
kernel releases.

It moves the id sysfs file to the dev_groups structure, and creates the needed
show/store functions, instead of relying on one "universal" function for this.
By doing this, it removes the need for this to be in a temporary structure.
Tested-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove HV_DRV_VERSION, it has no meaning for upstream drivers.

Initially it was supposed to show the "Linux Integration Services"
version, now it is not in sync anymore with the out-of-tree drivers
available from the MSFT website.

The only place where a version string is still required is the KVP
command "IntegrationServicesVersion" which is handled by
tools/hv/hv_kvp_daemon.c. To satisfy such KVP request from the host pass
the current string to the daemon during KVP userland registration.
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Whenever a device is unregistered in vmbus_device_unregister (drivers/hv/vmbus_drv.c), the device name in the log message may contain garbage as the memory has already been freed by the time pr_info is called. Log example:
 [ 3149.170475] hv_vmbus: child device àõsèè0_5 unregistered

By logging the message just before calling device_unregister, the correct device name is printed:
[ 3145.034652] hv_vmbus: child device vmbus_0_5 unregistered

Also changing register & unregister messages to debug to avoid unnecessarily cluttering the kernel log.
Signed-off-by: NFernando M Soto <fsoto@bluecatnetworks.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We currently allocate synic structures in hv_sync_init(), but there's no way for
the driver to know about the allocation failure and it may continue to use the
uninitialized pointers. Solve this by introducing helpers for allocating and
freeing and doing the allocation before the on_each_cpu() call in
vmbus_bus_init().

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Even if guest were compiled without SMP support, it could not assume that host
wasn't. So switch to use mb() instead of smp_mb() to force memory barriers for
UP guest.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the infrastructure for delivering VMBUS interrupts using a
special vector. With this patch, we can now properly handle
the VMBUS interrupts that can be delivered on any CPU. Also,
turn on interrupt load balancing as well.

This patch requires the infrastructure that was implemented in the patch:
X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We establish the handler before we have fully initialized the VMBUS state.
Deal with spurious interrupts.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Vmbus interrupts are unique in that while the interrupt is delivered on a
given vector, these can be handled concurrently on different CPUs. Handle the
vmbus interrupts concurrently on all the CPUs.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that we can potentially take vmbus interrupts on any CPU, make the
tasklets per-CPU.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This call to seek offers is not necessary and just adds unnecessary delay.
Get rid of it.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Starting with Win8 (WS2012), the event page can be used to directly get the
channel ID that needs servicing. Modify the channel event handling code
to take advantage of this feature.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two reasons we need to use x86_hyper instead of
query_hypervisor_presence():

- Not only hyperv but also other hypervisors such as kvm would set
  X86_FEATURE_HYTPERVISOR, so query_hypervisor_presence() will return true even
  in kvm. This may cause extra delay of 5 seconds before failing the probing in
  kvm guest.
- The hypervisor has been detected in init_hypervisor(), so no need to do the
  work again.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We wait for about 5 seconds for the success of the hyperv registration even if
we were not in hyperv platform. This is suboptimal, so the patch check the cpuid
in the beginning of hv_acpi_init() instead of in vmbus_bus_init() to fail the
probing immediately.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Format GUIDS as per MSFT standard. This makes interacting with MSFT
tool stack easier.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NOlaf Hering <olaf@aepfle.de>
Reviewed-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a
no-op; interrupt randomness is now collected unconditionally in a very
low-overhead fashion; see commit 775f4b29.  The IRQF_SAMPLE_RANDOM
flag was scheduled to be removed in 2009 on the
feature-removal-schedule, so this patch is preparation for the final
removal of this flag.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: N"K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>

The function vmbus_exists() was introduced recently to deal with cases where
the vmbus driver failed to initialize and yet other Hyper-V drivers attempted
to register with the vmbus bus driver. This patch introduced a bug where
vmbus_driver_unregister() would fail to unregister the driver. This patch
fixes the problem.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NFuzhou Chen <fuzhouch@microsoft.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It turns out that the vmbus driver can be made unloadable. Make it
unloadable.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The hv vmbus driver was causing an OOPS since it was trying to register drivers
on top of the bus even if initialization of the bus has failed for some
reason (such as the odd chance someone would run a hv enabled kernel in a
non-hv environment).
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Modify the way we initialize the vmbus driver so that all the hyper-v drivers
can be linked with the kernel and still ensure that the vmbus driver
is fully initialized before the drivers that depend upon the vmbus
driver attempt to initialize.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is only used/needed by the vmbus core code, so move it out of the
hyperv.h file and into the .c file that uses it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As there is no user of this variable, it's time to delete it.  For
dynamic debugging of the hyperv code, use the standard dynamic debug
kernel interface.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No one outside of the hyperv core needs to include the asm/hyperv.h
file, so don't put it in the "global" include/linux/hyperv.h file.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>

struct hv_device_info is about 101 bytes in size. Do not allocate this structure
on the stack.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

vmbus_remove() cannot fail; clean it up accordingly.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In preparation to leveraging the driver_data field in struct
hv_vmbus_device_id, change the signature of struct hv_driver probe function.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>