- 20 11月, 2014 2 次提交
-
-
由 Chao Yu 提交于
Because we have checked the contrary condition in case of "if" judgment, we do not need to check the condition again in case of "else" judgment. Let's remove it. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In f2fs_remount, we will stop gc thread and set need_restart_gc as true when new option is set without BG_GC, then if any error occurred in the following procedure, we can restore to start the gc thread. But after that, We will fail to restore gc thread in start_gc_thread as BG_GC is not set in new option, so we'd better move this condition judgment out of start_gc_thread to fix this issue. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 19 11月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
We should put the inode page when error was occurred. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The locked page should be released before returning the function. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 12 11月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode. Otherwise, we can make some dirty pages during the truncation, and those pages will be written through f2fs_write_data_page. At that moment, the inode has still inline_data, so that it tries to write non- zero pages into inline_data area. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The scenario is like this. One trhead triggers: f2fs_write_data_pages lock_page f2fs_write_data_page f2fs_lock_op <- wait The other thread triggers: f2fs_truncate truncate_blocks f2fs_lock_op truncate_partial_data_page lock_page <- wait for locking the page This patch resolves this bug by relocating truncate_partial_data_page. This function is just to truncate user data page and not related to FS consistency as well. And, we don't need to call truncate_inline_data. Rather than that, f2fs_write_data_page will finally update inline_data later. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 11 11月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
The # of inline_data inode is decreased only when it has inline_data. After clearing the flag, we can't decreased the number. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 11月, 2014 3 次提交
-
-
由 Jaegeuk Kim 提交于
If a mount option has dirsync, we should call checkpoint for all the directory operations. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Under memory pressure, let's avoid skipping data writes. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
It needs to write node pages if checkpoint is not doing in order to avoid memory pressure. Reviewed-by: NChangman Lee <cm224.lee@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 11月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds to control the memory footprint used by ino entries. This will conduct best effort, not strictly. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds to monitor the number of ino entries. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 06 11月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
The roll-forward mechanism should be activated when the number of active logs is not 2. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 11月, 2014 5 次提交
-
-
由 Jaegeuk Kim 提交于
If a system wants to reduce the booting time as a top priority, now we can use a mount option, -o fastboot. With this option, f2fs conducts a little bit slow write_checkpoint, but it can avoid the node page reads during the next mount time. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Let's remove unused macro. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
__submit_merged_bio f2fs_write_end_io f2fs_write_end_io wait_io = X wait_io = x complete(X) complete(X) wait_io = NULL wait_for_completion() free(X) spin_lock(X) kernel panic In order to avoid this, this patch removes the wait_io facility. Instead, we can use wait_on_all_pages_writeback(sbi) to wait for end_ios. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If there is a chance to make a huge sized discard command, we don't need to split it out, since each blkdev_issue_discard should wait one at a time. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch simplifies the inline_data usage with the following rule. 1. inline_data is set during the file creation. 2. If new data is requested to be written ranges out of inline_data, f2fs converts that inode permanently. 3. There is no cases which converts non-inline_data inode to inline_data. 4. The inline_data flag should be changed under inode page lock. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 11月, 2014 22 次提交
-
-
由 Jan Kara 提交于
There's no point in using test_and_clear_bit_le() when we don't use the return value of the function. Just use clear_bit_le() instead. Coverity-id: 1016434 Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
We should not discard any data protected by the previous checkpoint all the time. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
When reading inline data, we should call flush_dcache_page. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
During the write_checkpoint, we should avoid f2fs_gc trigger to avoid any filesystem consistency. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jan Kara 提交于
f2fs_write_begin() doesn't initialize the 'dn' variable if the inode has inline data. However it uses its contents to decide whether it should just zero out the page or load data to it. Thus if we are unlucky we can zero out page contents instead of loading inline data into a page. CC: stable@vger.kernel.org CC: Changman Lee <cm224.lee@samsung.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Gu Zheng 提交于
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Gu Zheng 提交于
Rename f2fs_set/clear_bit to f2fs_test_and_set/clear_bit, which mean set/clear bit and return the old value, for better readability. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Gu Zheng 提交于
Set raw_super default to NULL to avoid the possibly used uninitialized warning, though we may never hit it in fact. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Gu Zheng 提交于
Introduce f2fs_change_bit to simplify the change bit logic in function set_to_next_nat{sit}. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Gu Zheng 提交于
Use clear_inode_flag to replace the redundant cond_clear_inode_flag. Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Gu Zheng 提交于
Remove the unneeded argument 'type' from __get_victim, use NO_CHECK_TYPE directly when calling v_ops->get_victim(). Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jan Kara 提交于
If user specifies too low end sector for trimming, f2fs_trim_fs() will use uninitialized value as a number of trimmed blocks and returns it to userspace. Initialize number of trimmed blocks early to avoid the problem. Coverity-id: 1248809 CC: stable@vger.kernel.org Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch declares f2fs_convert_inline_dir as a static function, which was reported by kbuild test robot. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
For better performance, we need to use kmap_atomic instead of kmap. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces do_make_empty_dir to mitigate code redundancy for inline_dentry. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces f2fs_dentry_ptr structure for the use of a function parameter in inline_dentry operations. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If the inode has inline_dentry, we should not truncate any block indices. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch introduces a core function, f2fs_fill_dentries, to remove redundant code in f2fs_readdir and f2fs_read_inline_dir. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch fixes wrongly counting inline_data inode numbers. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds status information for inline_dentry inodes. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previously, init_inode_metadata does not hold any parent directory's inode page. So, f2fs_init_acl can grab its parent inode page without any problem. But, when we use inline_dentry, that page is grabbed during f2fs_add_link, so that we can fall into deadlock condition like below. INFO: task mknod:11006 blocked for more than 120 seconds. Tainted: G OE 3.17.0-rc1+ #13 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mknod D ffff88003fc94580 0 11006 11004 0x00000000 ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8 0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220 ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002 Call Trace: [<ffffffff8173dc40>] ? bit_wait+0x50/0x50 [<ffffffff8173d4cd>] io_schedule+0x9d/0x130 [<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50 [<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0 [<ffffffff811640a7>] __lock_page+0x67/0x70 [<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40 [<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0 [<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs] [<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs] [<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs] [<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs] [<ffffffff8122d847>] get_acl+0x47/0x70 [<ffffffff8122db5a>] posix_acl_create+0x5a/0x150 [<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs] [<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs] [<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs] [<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs] [<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs] [<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs] [<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160 [<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200 [<ffffffff81741d7f>] tracesys+0xe1/0xe6 Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The inode page needs to wait NODE block io. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-