- 17 11月, 2010 32 次提交
-
-
由 Uwe Kleine-König 提交于
The mxc-keypad device seems to be the result of an early and partial merge of the keypad driver. It's unused and there is no corresponding driver available, so just remove it. Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
To use common macros to define the gpio ports for imx{1,21,25,27} the existing ones had to made more general and a few more base address defines were necessary. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
According to the reference manual of the i.MX25 the host controller uses an offset of 0x200 not 0x400 as was specified in the resources for mxc_usbh2. Needs-Testing: yes Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
This finally gets rid of mach-imx/devices.c. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
... plus a trivial simplification of mx21ads_sdhc_init() Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Alberto Panizzo 提交于
This function should be marked as __init because it is used only in the init phase. This fix the compiler warning: LD arch/arm/mach-mx3/built-in.o WARNING: arch/arm/mach-mx3/built-in.o(.text+0x1328): Section mismatch in reference from the function eet_init_devices() to the (unknown reference) .init.rodata:(unknown) The function eet_init_devices() references the (unknown reference) __initconst (unknown). This is often because eet_init_devices lacks a __initconst annotation or the annotation of (unknown) is wrong. Signed-off-by: NAlberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
SPI_IMX defaults to m for i.MX machines. So enabling SPI is enough. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Group soc specific data in a global struct instead of repeating it for each call to imxXX_add_flexcanX. The structs holding the actual data are placed in .init.constdata and so don't do much harm. Compared to the previous approach this reduces code size to call imx_add_flexcan. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Currently there is no platform data used in the driver. In case this changes and for consistency NULL is passed unused to the soc specific functions. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
This is only available for mx1 machines with no in-tree user. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
all these don't have a driver and are not added in any machine file. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Currently there is no platform data used in the driver. In case this changes NULL is passed unused to the soc specific functions. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
This gets rid of the last user of IMX_NEEDS_DEPRECATED_SYMBOLS. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Now only the virtual addresses [0xf4000000, 0xf5ffffff] are used for static per-SoC mappings. The few mappings of whole chip selects are moved accordingly. The now wrong defines for virtual base addresses are removed. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
This allows changing the mapping without the need to adapt all users. While at it remove some unneeded casts to void __iomem *, this is already taken care for in the IO_ADDRESS macros Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
This makes less code rely on the virtual constants. To further simplify code and reduce the needed boilerplate when defining the static mappings a new helper macro is defined in mach/hardware.h. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
This makes it more assembler friendly and allows it to be used in situation that need an unsigned long and not a pointer. Also the naming is clearer. IOMEM is introduced without IMX_ prefix as it is used this way in more than one ARM subarch and it might become globally available soon. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
-
- 27 10月, 2010 3 次提交
-
-
由 Hagen Paul Pfeifer 提交于
Use the new {max,min}3 macros to save some cycles and bytes on the stack. This patch substitutes trivial nested macros with their counterpart. Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net> Cc: Joe Perches <joe@perches.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 10月, 2010 5 次提交
-
-
由 Dinh Nguyen 提交于
Add function definition for irq_chip.set_wake to enable GPIO to wake-up the system. This patch has been tested on a MX51 Babbage system that had suspend code implemented. The set_wake implementation is necessary for a GPIO to wake up a system from suspend. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
Add functionality for the power button on MX51 Babbage board. Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Dinh Nguyen 提交于
Add imx_add_gpio_keys function to add gpio-keys in plat-mxc Signed-off-by: NDinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Rogerio Pimentel 提交于
Commit (06606ff1) "ARM: imx: dynamically register spi_imx devices (imx31)" registered the wrong SPI port for mx31_3ds board. mx31_3ds uses SPI2 to connect to the MC13783 PMIC. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NRogerio Pimentel <rogerio.pimentel@freescale.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Rogerio Pimentel 提交于
The function mxc_expio_init returns 0 on success, so fix the logic for printing the error case. Also fixed the wording on the error message. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NRogerio Pimentel <rogerio.pimentel@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-