- 31 1月, 2014 5 次提交
-
-
由 Dave Jones 提交于
Passing a freed 'pages' to free_xenballooned_pages will end badly on kernels with slub debug enabled. This looks out of place between the rc assign and the check, but we do want to kfree pages regardless of which path we take. Signed-off-by: NDave Jones <davej@fedoraproject.org> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Zoltan Kiss 提交于
The grant mapping API does m2p_override unnecessarily: only gntdev needs it, for blkback and future netback patches it just cause a lock contention, as those pages never go to userspace. Therefore this series does the following: - the original functions were renamed to __gnttab_[un]map_refs, with a new parameter m2p_override - based on m2p_override either they follow the original behaviour, or just set the private flag and call set_phys_to_machine - gnttab_[un]map_refs are now a wrapper to call __gnttab_[un]map_refs with m2p_override false - a new function gnttab_[un]map_refs_userspace provides the old behaviour It also removes a stray space from page.h and change ret to 0 if XENFEAT_auto_translated_physmap, as that is the only possible return value there. v2: - move the storing of the old mfn in page->index to gnttab_map_refs - move the function header update to a separate patch v3: - a new approach to retain old behaviour where it needed - squash the patches into one v4: - move out the common bits from m2p* functions, and pass pfn/mfn as parameter - clear page->private before doing anything with the page, so m2p_find_override won't race with this v5: - change return value handling in __gnttab_[un]map_refs - remove a stray space in page.h - add detail why ret = 0 now at some places v6: - don't pass pfn to m2p* functions, just get it locally Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Suggested-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Andrey Vagin 提交于
The SOFT_DIRTY bit shows that the content of memory was changed after a defined point in the past. mprotect() doesn't change the content of memory, so it must not change the SOFT_DIRTY bit. This bug causes a malfunction: on the first iteration all pages are dumped. On other iterations only pages with the SOFT_DIRTY bit are dumped. So if the SOFT_DIRTY bit is cleared from a page by mistake, the page is not dumped and its content will be restored incorrectly. This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify() is called only for present pages. Fixes commit 0f8975ec ("mm: soft-dirty bits for user memory changes tracking"). Signed-off-by: NAndrey Vagin <avagin@openvz.org> Acked-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Borislav Petkov <bp@suse.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
Both clang 3.5 and GCC 4.9 will support this (as of r199754 and r207196 respectively). Both have been tested to produce booting kernels when the 16-bit code is built with -m16. (Modulo LLVM PR3997, at least.) [ hpa: folded test for -m16 into M16_CFLAGS ] Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1390997807.20153.133.camel@i7.infradead.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Woodhouse 提交于
Commit dd78b973 ("x86, boot: Move CPU flags out of cpucheck") introduced ambiguous inline asm in the has_eflag() function. In 16-bit mode want the instruction to be 'pushfl', but we just say 'pushf' and hope the compiler does what we wanted. When building with 'clang -m16', it won't, because clang doesn't use the horrid '.code16gcc' hack that even 'gcc -m16' uses internally. Say what we mean and don't make the compiler make assumptions. [ hpa: ideally we would be able to use the gcc %zN construct here, but that is broken for 64-bit integers in gcc < 4.5. The code with plain "pushf/popf" is fine for 32- or 64-bit mode, but not for 16-bit mode; in 16-bit mode those are 16-bit instructions in .code16 mode, and 32-bit instructions in .code16gcc mode. ] Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1391079628.26079.82.camel@shinybook.infradead.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 30 1月, 2014 9 次提交
-
-
由 Andi Kleen 提交于
LTO requires consistent types of symbols over all files. So "nmi" cannot be declared as a char [] here, need to use the correct function type. Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-8-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andi Kleen 提交于
These functions are called from inline assembler stubs, thus need to be global and visible. Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-7-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andi Kleen 提交于
LTO in gcc 4.6/47. has trouble with global register variables. They were used to read the stack pointer. Use a simple inline assembler statement with a mov instead. This also helps LLVM/clang, which does not support global register variables. [ hpa: Ideally this should become a builtin in both gcc and clang. ] v2: More general asm constraint. Fix description (Jan Beulich) Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-6-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andi Kleen 提交于
The paravirt thunks use a hack of using a static reference to a static function to reference that function from the top level statement. This assumes that gcc always generates static function names in a specific format, which is not necessarily true. Simply make these functions global and asmlinkage or __visible. This way the static __used variables are not needed and everything works. Functions with arguments are __visible to keep the register calling convention on 32bit. Changed in paravirt and in all users (Xen and vsmp) v2: Use __visible for functions with arguments Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ido Yariv <ido@wizery.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-5-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andi Kleen 提交于
The paravirt patching code assumes that it can reference a local assembler label between two different top level assembler statements. This does not work with LTO where the assembler code may end up in different assembler files. Replace it with extern / global /asm linkage labels. This also removes one redundant copy of the macro. Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-4-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Andi Kleen 提交于
- Make the C code used by the paravirt stubs visible - Since they have to be global now, give them a more unique name. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-3-git-send-email-andi@firstfloor.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Paolo Bonzini 提交于
When Hyper-V hypervisor leaves are present, KVM must relocate its own leaves at 0x40000100, because Windows does not look for Hyper-V leaves at indices other than 0x40000000. In this case, the KVM features are at 0x40000101, but the old code would always look at 0x40000001. Fix by using kvm_cpuid_base(). This also requires making the function non-inline, since kvm_cpuid_base() is static. Fixes: 1085ba7f Cc: stable@vger.kernel.org Cc: mtosatti@redhat.com Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
It is unnecessary to go through hypervisor_cpuid_base every time a leaf is found (which will be every time a feature is requested after the next patch). Fixes: 1085ba7f Cc: stable@vger.kernel.org Cc: mtosatti@redhat.com Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Self explanatory. Reported-by: NRadim Krcmar <rkrcmar@redhat.com> Cc: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 29 1月, 2014 1 次提交
-
-
由 David Cohen 提交于
platform_ipc.h and platform_msic.h are wrongly declaring functions as external and with 'weak' attribute. This patch does a cleanup on those header files. It should have no functional change. Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1390950567-12821-1-git-send-email-david.a.cohen@linux.intel.com Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 28 1月, 2014 2 次提交
-
-
由 Yinghai Lu 提交于
Dave reported big numa system booting is broken. It turns out that commit 5b6e5295 ("x86: memblock: set current limit to max low memory address") sets the limit to low wrongly. max_low_pfn_mapped is different from max_pfn_mapped. max_low_pfn_mapped is always under 4G. That will memblock_alloc_nid all go under 4G. Revert 5b6e5295 to fix a no-boot regression which was triggered by 457ff1de ("lib/swiotlb.c: use memblock apis for early memory allocations"). Signed-off-by: NYinghai Lu <yinghai@kernel.org> Reported-by: NDave Hansen <dave.hansen@intel.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josh Triplett 提交于
The kernel already has this information, so other bits of kernel code shouldn't duplicate that. This also eliminates the use of __DATE__, which makes the build non-deterministic. This message was already disabled at build time, with PRINT_MESSAGES undef'd at the top of the file. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 27 1月, 2014 1 次提交
-
-
由 Jan Kiszka 提交于
Check for invalid state transitions on guest-initiated updates of MSR_IA32_APICBASE. This address both enabling of the x2APIC when it is not supported and all invalid transitions as described in SDM section 10.12.5. It also checks that no reserved bit is set in APICBASE by the guest. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> [Use cpuid_maxphyaddr instead of guest_cpuid_get_phys_bits. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 25 1月, 2014 3 次提交
-
-
由 Mike Travis 提交于
Fix UV call into kgdb to depend only on whether KGDB is defined and not both KGDB and KDB. This allows the power nmi command to use the gdb remote connection if enabled. Note new action of 'kgdb' needs to be set as well to indicate user wants to wait for gdb to be connected. If it's set to 'kdb' then an error message is displayed if KDB is not configured. Also note that if both KGDB and KDB are enabled, then the action of 'kgdb' or 'kdb' has no affect on which is used. See the KGDB documentation for further information. Signed-off-by: NMike Travis <travis@sgi.com> Reviewed-by: NHedi Berriche <hedi@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20140114162551.635540667@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mike Travis 提交于
Make uv_register_nmi_notifier() and uv_handle_nmi_ping() static to address sparse warnings. Fix problem where uv_nmi_kexec_failed is unused when CONFIG_KEXEC is not defined. Signed-off-by: NMike Travis <travis@sgi.com> Reviewed-by: NHedi Berriche <hedi@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20140114162551.480872353@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Mike Travis 提交于
Some code added to the debug_core module had KDB dependencies that it shouldn't have. Move the KDB dependent REASON back to the caller to remove the dependency in the debug core code. Update the call from the UV NMI handler to conform to the new interface. Signed-off-by: NMike Travis <travis@sgi.com> Reviewed-by: NHedi Berriche <hedi@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20140114162551.318251993@asylum.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 1月, 2014 6 次提交
-
-
由 Vadim Rozenfeld 提交于
Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com> Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Robert Graffham 提交于
Remove an outdated reference to "most personal computers" having only one CPU, and change the use of "singleprocessor" and "single processor" in CONFIG_SMP's documentation to "uniprocessor" across all arches where that documentation is present. Signed-off-by: NRobert Graffham <psquid@psquid.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ard Biesheuvel 提交于
This patch makes a couple of changes to the SMBIOS/DMI scanning code so it can be used on other archs (such as ARM and arm64): (a) wrap the calls to ioremap()/iounmap(), this allows the use of a flavor of ioremap() more suitable for random unaligned access; (b) allow the non-EFI fallback probe into hardcoded physical address 0xF0000 to be disabled. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: NGrant Likely <grant.likely@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Salter 提交于
Signed-off-by: NMark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sasha Levin 提交于
Most of the VM_BUG_ON assertions are performed on a page. Usually, when one of these assertions fails we'll get a BUG_ON with a call stack and the registers. I've recently noticed based on the requests to add a small piece of code that dumps the page to various VM_BUG_ON sites that the page dump is quite useful to people debugging issues in mm. This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what VM_BUG_ON() does, also dumps the page before executing the actual BUG_ON. [akpm@linux-foundation.org: fix up includes] Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vadim Rozenfeld 提交于
Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com> Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 23 1月, 2014 4 次提交
-
-
由 Peter Zijlstra 提交于
Since we keep the clock value linearly continuous on frequency change, make sure the initial multiplier is 0, such that our initial value is 0. Without this we compute the initial value at whatever the TSC has managed to reach since power-on. Reported-and-Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Fixes: 20d1c86a ("sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs") Cc: lenb@kernel.org Cc: rjw@rjwysocki.net Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: rui.zhang@intel.com Cc: jacob.jun.pan@linux.intel.com Cc: Mike Galbraith <bitbucket@online.de> Cc: hpa@zytor.com Cc: paulmck@linux.vnet.ibm.com Cc: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: dyoung@redhat.com Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140123094804.GP30183@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 David Cohen 提交于
This patch adds missing 'void' to functions that doesn't receive arguments. Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1390429369-13761-1-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Paul Gortmaker 提交于
Commit bc20aa48 ("x86, intel-mid: Add Merrifield platform support") added new instances of __cpuinit usage. We removed this a couple versions ago; we now want to remove the compat no-op stubs. Introducing new users is not what we want to see at this point in time, as it will break once the stubs are gone. This also fixes an out of sync __init vs. __cpuinit -- as the former is real, and the latter is a no-op; hence it would have been a section mismatch. Cc: Fei Yang <fei.yang@intel.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1390412125-19439-1-git-send-email-paul.gortmaker@windriver.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Paul Gortmaker 提交于
Commit 85611e3f ("x86, intel-mid: Add Clovertrail platform support") added new instances of __cpuinit usage. We removed this a couple versions ago; we now want to remove the compat no-op stubs. Introducing new users is not what we want to see at this point in time, as it will break once the stubs are gone. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Fei Yang <fei.yang@intel.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1390412055-19341-1-git-send-email-paul.gortmaker@windriver.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 22 1月, 2014 9 次提交
-
-
由 David Woodhouse 提交于
It looks like GCC will always emit an object that is marked with an explicit section, although the documentation doesn't say that and we possibly shouldn't be relying on it. Clang does *not* do so, so add __attribute__((used)) to make sure. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1389180083-23249-2-git-send-email-David.Woodhouse@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Woodhouse 提交于
Define them once in arch/x86/Makefile instead of twice. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1389180083-23249-1-git-send-email-David.Woodhouse@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Michael Davidson 提交于
Improve the debuggability of relocations output. When trying to compare the output between different linkers, it's handy to be able to see the section names in output. Signed-off-by: NMichael Davidson <md@google.com> Link: http://lkml.kernel.org/r/20140121203223.GA12649@www.outflux.netSigned-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Grygorii Strashko 提交于
Update X86 code to use NUMA_NO_NODE instead of MAX_NUMNODES while calling memblock APIs, because memblock API will be changed to use NUMA_NO_NODE and will produce warning during boot otherwise. See: https://lkml.org/lkml/2013/12/9/898Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Santosh Shilimkar 提交于
The memblock current limit value is used to limit early boot memory allocations below max low memory address by default, as the kernel can access only to the low memory. Hence, set memblock current limit value to the max mapped low memory address instead of max mapped memory address. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tejun Heo <tj@kernel.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
At very early time, the kernel have to use some memory such as loading the kernel image. We cannot prevent this anyway. So any node the kernel resides in should be un-hotpluggable. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
When parsing SRAT, we know that which memory area is hotpluggable. So we invoke function memblock_mark_hotplug() introduced by previous patch to mark hotpluggable memory in memblock. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tang Chen 提交于
[sfr@canb.auug.org.au: fix powerpc build] Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roger Pau Monne 提交于
otherwise we will get for some user-space applications that use 'clone' with CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID end up hitting an assert in glibc manifested by: general protection ip:7f80720d364c sp:7fff98fd8a80 error:0 in libc-2.13.so[7f807209e000+180000] This is due to the nature of said operations which sets and clears the PID. "In the successful one I can see that the page table of the parent process has been updated successfully to use a different physical page, so the write of the tid on that page only affects the child... On the other hand, in the failed case, the write seems to happen before the copy of the original page is done, so both the parent and the child end up with the same value (because the parent copies the page after the write of the child tid has already happened)." (Roger's analysis). The nature of this is due to the Xen's commit of 51e2cac257ec8b4080d89f0855c498cbbd76a5e5 "x86/pvh: set only minimal cr0 and cr4 flags in order to use paging" the CR0_WP was removed so COW features of the Linux kernel were not operating properly. While doing that also update the rest of the CR0 flags to be inline with what a baremetal Linux kernel would set them to. In 'secondary_startup_64' (baremetal Linux) sets: X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | X86_CR0_PG The hypervisor for HVM type guests (which PVH is a bit) sets: X86_CR0_PE | X86_CR0_ET | X86_CR0_TS For PVH it specifically sets: X86_CR0_PG Which means we need to set the rest: X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM to have full parity. Signed-off-by: NRoger Pau Monne <roger.pau@citrix.com> Signed-off-by: NMukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> [v1: Took out the cr4 writes to be a seperate patch] [v2: 0-DAY kernel found xen_setup_gdt to be missing a static]
-