Be sure that sock_list initialized in net_init hook was return
to initial state.
Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NVasily Averin <vvs@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DSA now uses one of the symbols exported by the bridge,
br_vlan_enabled(). This has a stub, if the bridge is not
enabled. However, if the bridge is enabled, we cannot have DSA built
in and the bridge as a module, otherwise we get undefined symbols at
link time:

   net/dsa/port.o: In function `dsa_port_vlan_add':
   net/dsa/port.c:255: undefined reference to `br_vlan_enabled'
   net/dsa/port.o: In function `dsa_port_vlan_del':
   net/dsa/port.c:270: undefined reference to `br_vlan_enabled'
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
net: improve the process of redirect and toobig for ipv6 tunnels

Now let's say there are 3 kinds of icmp packets to process for tunnels,
toobig(needfrag), redirect, others, their process should be:

 - toobig(needfrag)
   update the lower dst's pmtu by route cache, also update sk dst's pmtu
   if possible, or it will be fine if sk dst pmtu will get updated on tx
   path.

 - redirect
   update the lower dst's gw by route cache and return, no need to send
   this redirect packet to user sk.

 - others
   send the packet to user's sk, or it will also be fine to use err_count
   to count it and report fail link on tx path.

All ipv4 tunnels basically follow this while some of ipv6 tunnels are
doing in different ways, like ip6gre and ip6_tunnels update tnl dev's
mtu instead of updating lower dst pmtu, no redirect process on their
err_handlers, which doesn't make any sense and even causes performance
problems.

This patchset is to improve the process of redirect and toobig for ip6gre
ip4ip6, ip6ip6 tunnels, as in ipv4 tunnels.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to remove some useless codes of redirect and fix some
indents on ip4ip6 and ip6ip6's err_handlers.

Note that redirect icmp packet is already processed in ip6_tnl_err,
the old redirect codes in ip4ip6_err actually never worked even
before this patch. Besides, there's no need to send redirect to
user's sk, it's for lower dst, so just remove it in this patch.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The same improvement in "ip6_gre: process toobig in a better way"
is needed by ip4ip6 and ip6ip6 as well.

Note that ip4ip6 and ip6ip6 will also update sk dst pmtu in their
err_handlers. Like I said before, gre6 could not do this as it's
inner proto is not certain. But for all of them, sk dst pmtu will
be updated in tx path if in need.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The same process for redirect in "ip6_gre: add the process for redirect
in ip6gre_err" is needed by ip4ip6 and ip6ip6 as well.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now ip6gre processes toobig icmp packet by setting gre dev's mtu in
ip6gre_err, which would cause few things not good:

  - It couldn't set mtu with dev_set_mtu due to it's not in user context,
    which causes route cache and idev->cnf.mtu6 not to be updated.

  - It has to update sk dst pmtu in tx path according to gredev->mtu for
    ip6gre, while it updates pmtu again according to lower dst pmtu in
    ip6_tnl_xmit.

  - To change dev->mtu by toobig icmp packet is not a good idea, it should
    only work on pmtu.

This patch is to process toobig by updating the lower dst's pmtu, as later
sk dst pmtu will be updated in ip6_tnl_xmit, the same way as in ip4gre.

Note that gre dev's mtu will not be updated any more, it doesn't make any
sense to change dev's mtu after receiving a toobig packet.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is to add redirect icmp packet process for ip6gre by
calling ip6_redirect() in ip6gre_err(), as in vti6_err.

Prior to this patch, there's even no route cache generated after
receiving redirect.
Reported-by: NJianlin Shi <jishi@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In xmit process, the variables are set many times. In fact,
it is enough for these variables to be set once.
After a long time test, the throughput performance is better
than before.

CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Samuel Ortiz says:

====================
NFC 4.15 pull request

This is the NFC pull request for 4.15. We have:

- A new netlink command for explicitly deactivating NFC targets
- i2c constification for all NFC drivers
- One NFC device allocation error path fix
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andy Zhou says:

====================
Openvswitch meter action

This patch series is the first attempt to add openvswitch
meter support. We have previously experimented with adding
metering support in nftables. However 1) It was not clear
how to expose a named nftables object cleanly, and 2)
the logic that implements metering is quite small, < 100 lines
of code.

With those two observations, it seems cleaner to add meter
support in the openvswitch module directly.

---

    v1(RFC)->v2:  remove unused code improve locking
		  and other review comments
    v2 -> v3:     rebase
    v3 -> v4:     fix undefined "__udivdi3" references on 32 bit builds.
                  use div_u64() instead.
    v4 -> v5:     rebase
====================
Acked-by: NPravin B Shelar <pshelar@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implements OVS kernel meter action support.
Signed-off-by: NAndy Zhou <azhou@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OVS kernel datapath so far does not support Openflow meter action.
This is the first stab at adding kernel datapath meter support.
This implementation supports only drop band type.
Signed-off-by: NAndy Zhou <azhou@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Later patches will invoke get_dp() outside of datapath.c. Export it.
Signed-off-by: NAndy Zhou <azhou@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Meter has its own netlink family. Define netlink messages and attributes
for communicating with the user space programs.
Signed-off-by: NAndy Zhou <azhou@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: b53: Support prepended Broadcom tags

This patch series adds support for prepended 4-bytes Broadcom tags that we
already support. This type of tag will typically be used when interfaced to
a SoC like BCM58xx (NorthStar Plus) which supports a Flow Accelerator (WIP).
In that case, we need to support a slightly different tagging format.

The first patch does a bit of re-factoring and passes a port index to
the get_tag_protocol() function since at least two different drivers need
that type of information (mt7530, b53) to support tagging or not.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On BCM58xx devices (Northstar Plus), there is an accelerator attached to
port 8 which would only work if we use prepended Broadcom tags. Resolve
that difference in our get_tag_protocol() function by setting the
appropriate tagging protocol in that case. We need to change
b53_brcm_hdr_setup() a little bit now since we can deal with two types
of Broadcom tags.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the
4-bytes Broadcom tag that we already support, but in a format where it
is pre-pended to the packet instead of located between the MAC SA and
the Ethertyper (DSA_TAG_PROTO_BRCM).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for supporting the same Broadcom tag format, but instead
of inserted between the MAC SA and EtherType, prepended to the Ethernet
frame, restructure the code a little bit to make that possible and take
an offset parameter.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of drivers want to check whether the configured CPU port is a
possible configuration for enabling tagging, pass down the CPU port
number so they verify that.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc-4.4.4 (at lest) has issues with initializers and anonymous unions:

net/sched/sch_red.c: In function 'red_dump_offload':
net/sched/sch_red.c:282: error: unknown field 'stats' specified in initializer
net/sched/sch_red.c:282: warning: initialization makes integer from pointer without a cast
net/sched/sch_red.c:283: error: unknown field 'stats' specified in initializer
net/sched/sch_red.c:283: warning: initialization makes integer from pointer without a cast
net/sched/sch_red.c: In function 'red_dump_stats':
net/sched/sch_red.c:352: error: unknown field 'xstats' specified in initializer
net/sched/sch_red.c:352: warning: initialization makes integer from pointer without a cast

Work around this.

Fixes: 602f3baf ("net_sch: red: Add offload ability to RED qdisc")
Cc: Nogah Frankel <nogahf@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since Mellanox focus is on newer adapters, we would like to have the
ability to disable the support for old gen2 adapters.

This can be done by turning off the MLX4_CORE_GEN2 Kconfig flag.
We keep it turned on by default.
Signed-off-by: NSlava Shwartsman <slavash@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The way people generally use netlink_dump is that they fill in the skb
as much as possible, breaking when nla_put returns an error. Then, they
get called again and start filling out the next skb, and again, and so
forth. The mechanism at work here is the ability for the iterative
dumping function to detect when the skb is filled up and not fill it
past the brim, waiting for a fresh skb for the rest of the data.

However, if the attributes are small and nicely packed, it is possible
that a dump callback function successfully fills in attributes until the
skb is of size 4080 (libmnl's default page-sized receive buffer size).
The dump function completes, satisfied, and then, if it happens to be
that this is actually the last skb, and no further ones are to be sent,
then netlink_dump will add on the NLMSG_DONE part:

  nlh = nlmsg_put_answer(skb, cb, NLMSG_DONE, sizeof(len), NLM_F_MULTI);

It is very important that netlink_dump does this, of course. However, in
this example, that call to nlmsg_put_answer will fail, because the
previous filling by the dump function did not leave it enough room. And
how could it possibly have done so? All of the nla_put variety of
functions simply check to see if the skb has enough tailroom,
independent of the context it is in.

In order to keep the important assumptions of all netlink dump users, it
is therefore important to give them an skb that has this end part of the
tail already reserved, so that the call to nlmsg_put_answer does not
fail. Otherwise, library authors are forced to find some bizarre sized
receive buffer that has a large modulo relative to the common sizes of
messages received, which is ugly and buggy.

This patch thus saves the NLMSG_DONE for an additional message, for the
case that things are dangerously close to the brim. This requires
keeping track of the errno from ->dump() across calls.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dave Taht says:

====================
netem: add nsec scheduling and slot feature

This patch series converts netem away from the old "ticks" interface and
userspace API, and adds support for a new "slot" feature intended to
emulate bursty macs such as WiFi and LTE better.

Changes since v2:
Use u64 for packet_len_sched_time()
Use simpler max(time_to_send,q->slot.slot_next)

Changes since v1:
Always pass new nanosecond APIs to userspace
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Slotting is a crude approximation of the behaviors of shared media such
as cable, wifi, and LTE, which gather up a bunch of packets within a
varying delay window and deliver them, relative to that, nearly all at
once.

It works within the existing loss, duplication, jitter and delay
parameters of netem. Some amount of inherent latency must be specified,
regardless.

The new "slot" parameter specifies a minimum and maximum delay between
transmission attempts.

The "bytes" and "packets" parameters can be used to limit the amount of
information transferred per slot.

Examples of use:

tc qdisc add dev eth0 root netem delay 200us \
         slot 800us 10ms bytes 64k packets 42

A more correct example, using stacked netem instances and a packet limit
to emulate a tail drop wifi queue with slots and variable packet
delivery, with a 200Mbit isochronous underlying rate, and 20ms path
delay:

tc qdisc add dev eth0 root handle 1: netem delay 20ms rate 200mbit \
         limit 10000
tc qdisc add dev eth0 parent 1:1 handle 10:1 netem delay 200us \
         slot 800us 10ms bytes 64k packets 42 limit 512
Signed-off-by: NDave Taht <dave.taht@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netem userspace has long relied on a horrible /proc/net/psched hack
to translate the current notion of "ticks" to nanoseconds.

Expressing latency and jitter instead, in well defined nanoseconds,
increases the dynamic range of emulated delays and jitter in netem.

It will also ease a transition where reducing a tick to nsec
equivalence would constrain the max delay in prior versions of
netem to only 4.3 seconds.
Signed-off-by: NDave Taht <dave.taht@gmail.com>
Suggested-by: NEric Dumazet <edumazet@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upgrade the internal netem scheduler to use nanoseconds rather than
ticks throughout.

Convert to and from the std "ticks" userspace api automatically,
while allowing for finer grained scheduling to take place.
Signed-off-by: NDave Taht <dave.taht@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid traversing the list of mr6_tables (which requires the
rtnl_lock) in ip6mr_sk_done(), when we know in advance that
a match will not be found.
This can happen when rawv6_close()/ip6mr_sk_done() is invoked
on non-mroute6 sockets.
This patch helps reduce rtnl_lock contention when destroying
a large number of net namespaces, each having a non-mroute6
raw socket.

v2: same patch, only fixed subject line and expanded comment.
Signed-off-by: NFrancesco Ruggeri <fruggeri@arista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The variable giga_ctrl is being assigned to zero however this is
never read and hence the assignment is redundant, so remove it.
Cleans up clang warning:

drivers/net/ethernet/realtek/r8169.c:1978:3: warning: Value stored
to 'giga_ctrl' is never read
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix embarrassing bug in lan9303_alr_del_port(): Instead of zeroing
entr->mac_addr, I destroyed the next cache entry. Affected .port_fdb_del and
.port_mdb_del.

Fixes: 0620427e ("net: dsa: lan9303: Add fdb/mdb manipulation")
Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Use after free in vlan, from Cong Wang.

 2) Handle NAPI poll with a zero budget properly in mlx5 driver, from
    Saeed Mahameed.

 3) If DMA mapping fails in mlx5 driver, NULL out page, from Inbar
    Karmy.

 4) Handle overrun in RX FIFO of sun4i CAN driver, from Gerhard
    Bertelsmann.

 5) Missing return in mdb and vlan prepare phase of DSA layer, from
    Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  vlan: fix a use-after-free in vlan_device_event()
  net: dsa: return after vlan prepare phase
  net: dsa: return after mdb prepare phase
  can: ifi: Fix transmitter delay calculation
  tcp: fix tcp_fastretrans_alert warning
  tcp: gso: avoid refcount_t warning from tcp_gso_segment()
  can: peak: Add support for new PCIe/M2 CAN FD interfaces
  can: sun4i: handle overrun in RX FIFO
  can: c_can: don't indicate triple sampling support for D_CAN
  net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs
  net/mlx5e: Set page to null in case dma mapping fails
  net/mlx5e: Fix napi poll with zero budget
  net/mlx5: Cancel health poll before sending panic teardown command
  net/mlx5: Loop over temp list to release delay events
  rds: ib: Fix NULL pointer dereference in debug code

Merge tag 'wireless-drivers-next-for-davem-2017-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.15

Last minute patches before the merge window. Not really anything
special standing out, mostly fixes or cleanup and some minor new
features.

Major changes:

iwlwifi

* some new PCI IDs
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip6_frag_id was only used by UFO, which has been removed.
ipv6_proxy_select_ident() only existed to set ip6_frag_id and has no
in-tree callers.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Guillaume Nault says:

====================
l2tp: avoid aliasing tunnels socket pointer

We don't need to copy the tunnel's socket pointer in the pseudo-wire
specific session structures. This uselessly complicates the code
and hampers evolution.

This series was part of an effort to protect tunnels socket pointer
with RCU. But since it provides nice cleanup, I submit it separately.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The last user of .tunnel_sock is pppol2tp_connect() which defensively
uses it to verify internal data consistency.

This check isn't necessary: l2tp_session_get() guarantees that the
returned session belongs to the tunnel passed as parameter. And
.tunnel_sock is never updated, so checking that it still points to
the parent tunnel socket is useless; that test can never fail.
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sessions don't need to use l2tp_sock_to_tunnel(xxx->tunnel_sock) for
accessing their parent tunnel. They have the .tunnel field in the
l2tp_session structure for that. Furthermore, in all these cases, the
session is registered, so we're guaranteed that .tunnel isn't NULL and
that the session properly holds a reference on the tunnel.
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This field has never been used.
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>