The gntdev driver allows usermode to map granted pages from other
domains.  This is typically used to implement a Xen backend driver
in user mode.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Allocate irq descs on any NUMA node (we don't care) rather than
specifically node 0, which may not exist.

(At the moment NUMA is meaningless within a domain, so any info
the kernel has is just from an SRAT table we haven't suppressed/disabled.)
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

If this is a non-HIGHMEM 32-bit kernel, then the page structures only go
up to the limit of addressable memory, even if more memory is physically
present.  Don't try to add that extra memory to the balloon.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Re-map and re-bind all the pirqs at resume time.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

When remapping MSIs into pirqs for PV on HVM guests, qemu is responsible
for doing the actual mapping and unmapping.
We only give qemu the desired pirq number when we ask to do the mapping
the first time, after that we should be reading back the pirq number
from qemu every time we want to re-enable the MSI.

This fixes a bug in xen_hvm_setup_msi_irqs that manifests itself when
trying to enable the same MSI for the second time: the old MSI to pirq
mapping is still valid at this point but xen_hvm_setup_msi_irqs would
try to assign a new pirq anyway.
A simple way to reproduce this bug is to assign an MSI capable network
card to a PV on HVM guest, if the user brings down the corresponding
ethernet interface and up again, Linux would fail to enable MSIs on the
device.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Use the new hypercall PHYSDEVOP_get_free_pirq to ask Xen to allocate a
pirq. Remove the unsupported PHYSDEVOP_get_nr_pirqs hypercall to get the
amount of pirq available.

This fixes find_unbound_pirq that otherwise would return a number
starting from nr_irqs that might very well be out of range in Xen.

The symptom of this bug is that when you passthrough an MSI capable pci
device to a PV on HVM guest, Linux would fail to enable MSIs on the
device.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

When we allocate a vector for MSI/MSI-X we save away the PIRQ, and the
vector value. When we unmap (de-allocate) the MSI/MSI-X vector(s) we
need to provide the PIRQ and the vector value. What we did instead
was to provide the GSI (which was zero) and the vector value, and we
got these unhappy error messages:

(XEN) irq.c:1575: dom0: pirq 0 not mapped
[    7.733415] unmap irq failed -22

This patches fixes this and we use the PIRQ value instead of the GSI
value.

CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If the user specifies mem= on the kernel command line, some or all
of the extra memory E820 region may be clipped away, so make sure
we don't try to add more extra memory than exists in E820.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The balloon_lock is useless, since it protects nothing against nothing.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Add extra pages in the pseudo-physical address space to the balloon
so we can extend into them later.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

This reverts commit 24a89b5b.

We should no longer need an address space now that we're correctly
setting VM_PFNMAP on our vmas.

Conflicts:

	drivers/xen/xenfs/super.c
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The per-cpu event channel masks can be updated unlocked from multiple
CPUs, so use the locked variant.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

To bind all event channels to CPU#0, it is not sufficient to set all
of its cpu_evtchn_mask[] bits; all other CPUs also need to get their
bits cleared. Otherwise, evtchn_do_upcall() will start handling
interrupts on CPUs they're not intended to run on, which can be
particularly bad for per-CPU ones.

[ linux-2.6.18-xen.hg 7de7453dee36 ]
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

.mount now returns a struct dentry *.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Set VM_PFNMAP in the privcmd mmap file_op, rather than later in
xen_remap_domain_mfn_range when it is too late because
vma_wants_writenotify has already been called and vm_page_prot has
already been modified.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

The IRQ core code will take care of disabling and reenabling
interrupts over suspend resume automatically, therefore we do not need
to do this in the Xen event channel code.

The only exception is those event channels marked IRQF_NO_SUSPEND
which the IRQ core ignores. We must unmask these ourselves, taking
care to obey the current IRQ_DISABLED status. Failure check for
IRQ_DISABLED leads to enabling polled only event channels, such as
that associated with the pv spinlocks, which must never be enabled:

[   21.970432] ------------[ cut here ]------------
[   21.970432] kernel BUG at arch/x86/xen/spinlock.c:343!
[   21.970432] invalid opcode: 0000 [#1] SMP
[   21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate
[   21.970432] Modules linked in:
[   21.970432]
[   21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34)
[   21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3
[   21.970432] EIP is at dummy_handler+0x3/0x7
[   21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000
[   21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10
[   21.970432]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
[   21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000)
[   21.970432] Stack:
[   21.970432]  dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001
[   21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284
[   21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90
[   21.970432] Call Trace:
[   21.970432]  [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122
[   21.970432]  [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55
[   21.970432]  [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f
[   21.970432]  [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30
[   21.970432]  [<c1030d47>] ? xen_do_upcall+0x7/0xc
[   21.970432]  [<c102007b>] ? apic_reg_read+0xd3/0x22d
[   21.970432]  [<c1002227>] ? hypercall_page+0x227/0x1005
[   21.970432]  [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14
[   21.970432]  [<c102da7c>] ? check_events+0x8/0xc
[   21.970432]  [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1
[   21.970432]  [<c105e485>] ? finish_task_switch+0x62/0xba
[   21.970432]  [<c14e3f84>] ? schedule+0x808/0x89d
[   21.970432]  [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22
[   21.970432]  [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162
[   21.970432]  [<c102f43a>] ? cpu_idle+0x6d/0x6f
[   21.970432]  [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf
[   21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \
c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \
eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15
[   21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10
[   21.970432] ---[ end trace c0b71f7e12cf3011 ]---
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

put_user() may fail.  In this case propagate error code from
privcmd_ioctl_mmap_batch().
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Register a pci notifier to add (or remove) pci devices to Xen via
hypercalls. Xen needs to know the pci devices present in the system to
handle pci passthrough and even MSI remapping in the initial domain.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>

Use the console hypercalls for dom0 console.

[ Impact: Add Xen dom0 console ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Do initial xenbus/xenstore setup in dom0.  In dom0 we need to actually
allocate the xenstore resources, rather than being given them from
outside.

[ Impact: initialize Xenbus ]
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Implement xen_create_msi_irq to create an msi and remap it as pirq.
Use xen_create_msi_irq to implement an initial domain specific version
of setup_msi_irqs.
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NYunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Implement xen_register_gsi to setup the correct triggering and polarity
properties of a gsi.
Implement xen_register_pirq to register a particular gsi as pirq and
receive interrupts as events.
Call xen_setup_pirqs to register all the legacy ISA irqs as pirqs.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Map MSIs into pirqs, writing 0 in the MSI vector data field and the pirq
number in the MSI destination id field.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Disable pcifront when running on HVM: it is meant to be used with pv
guests that don't have PCI bus.

Use acpi_register_gsi_xen_hvm to remap GSIs into pirqs.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and
receive the interrupt as an event channel from that point on.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Use PHYSDEVOP_get_nr_pirqs to get the maximum number of pirqs from xen.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

PHYSDEVOP_map_pirq might return a pirq different from what we asked if
we are running as an HVM guest, so we need to be able to support pirqs
that are different from linux irqs.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* Fix bitmask formatting on 64 bit by specifying correct field widths.

* Output both global and local masked and pending information.

* Indicate in list of pending interrupts whether they are pending in
  the L2, masked globally and/or masked locally.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Make sure the irq is set up before binding a virq event channel to it.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

All event channels startbound to VCPU 0 so ensure that cpu_evtchn_mask
is initialised to reflect this. Otherwise there is a race after registering an
event channel but before the affinity is explicitly set where the event channel
can be delivered. If this happens then the event channel remains pending in the
L1 (evtchn_pending) array but is cleared in L2 (evtchn_pending_sel), this means
the event channel cannot be reraised until another event channel happens to
trigger the same L2 entry on that VCPU.

sizeof(cpu_evtchn_mask(0))==sizeof(unsigned long*) which is not correct, and
causes only the first 32 or 64 event channels (depending on architecture) to be
initially bound to VCPU0. Use sizeof(struct cpu_evtchn_s) instead.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: stable@kernel.org

Change event delivery to:
 - mask+clear event in the upcall function
 - use handle_fasteoi_irq as the handler
 - unmask in the eoi function (and handle migration)
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

It has its uses in a domU as well as dom0.  Xen will prevent an
unprivileged domain from doing anything untoward.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

This allows xenfs to be built as a module, previously it required flush_tlb_all
and arbitrary_virt_to_machine to be exported.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

On error IOCTL_PRIVCMD_MMAPBATCH is expected to set the top nibble of
the effected MFN and return 0. Currently it leaves the MFN unmodified
and returns the number of failures. Therefore:

- reimplement remap_domain_mfn_range() using direct
  HYPERVISOR_mmu_update() calls and small batches. The xen_set_domain_pte()
  interface does not report errors and since some failures are
  expected/normal using the multicall infrastructure is too noisy.
- return 0 as expected
- writeback the updated MFN list to mmapbatch->arr not over mmapbatch,
  smashing the caller's stack.
- remap_domain_mfn_range can be static.

With this change I am able to start an HVM domain.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

xen_store_interface is needed by xenfs, and xenfs may be a module.

[ Impact: build fix for modular xenfs ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>