When registering the handlers, any state they rely on must be
completely initialised first.  When unregistering, we must wait until
they are definitely no longer running.  llc_rcv() must also avoid
reading the handler pointers again after checking for NULL.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise the station packet handler will remain registered even though
the module is unloaded.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

llc_station_init() creates and processes an event skb with no effect
other than to change the state from DOWN to UP.  Allocation failure is
reported, but then ignored by its caller, llc2_init().  Remove this
possibility by simply initialising the state as UP.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix error handling in case making of dir dev_snmp6 failes
Signed-off-by: NIgor Maravic <igorm@etf.rs>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit caacf05e causes big drop of UDP loop back performance.
The cause of the regression is that we do not cache the local output
routes. Each time we send a datagram from unconnected UDP socket,
the kernel allocates a dst_entry and adds it to the rt_uncached_list.
It creates lock contention on the rt_uncached_lock.
Reported-by: NAlex Shi <alex.shi@intel.com>
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

napi->poll() needs IRQ enabled, so we have to re-enable IRQ before
calling it.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this patch, I can't get netconsole logs remotely over
vlan. The reason is probably we don't handle vlan tags in either
netpoll tx or rx path.

I am not sure if I use these vlan functions correctly, at
least this patch works.

Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up vlan_dev_hard_start_xmit() function.

Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To be consistent, s/info/vlan/.

Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although this doesn't matter actually, because netpoll_tx_running()
doesn't use the parameter, the code will be more readable.

For team_dev_queue_xmit() we have to move it down to avoid
compile errors.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't delete 'p' from the list in the loop,
so we can just use list_for_each_entry().

Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add comments on why we don't notify NETDEV_RELEASE.

Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes several problems in the call path of
netpoll_send_skb_on_dev():

1. Disable IRQ's before calling netpoll_send_skb_on_dev().

2. All the callees of netpoll_send_skb_on_dev() should use
   rcu_dereference_bh() to dereference ->npinfo.

3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(),
this patch fixes it by using the 'npinfo' passed from netpoll_rx()
where it is already dereferenced with rcu_dereference_bh().

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup()
may be called with read_lock() held too, so we should make them
non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

slave_enable_netpoll() and __netpoll_setup() may be called
with read_lock() held, so should use GFP_ATOMIC to allocate
memory. Eric suggested to pass gfp flags to __netpoll_setup().

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here's a quote of the comment about the BUG macro from asm-generic/bug.h:

 Don't use BUG() or BUG_ON() unless there's really no way out; one
 example might be detecting data structure corruption in the middle
 of an operation that can't be backed out of.  If the (sub)system
 can somehow continue operating, perhaps with reduced functionality,
 it's probably not BUG-worthy.

 If you're tempted to BUG(), think again:  is completely giving up
 really the *only* solution?  There are usually better options, where
 users don't need to reboot ASAP and can mostly shut down cleanly.

In our case, the status flag of a ring buffer slot is managed from both sides,
the kernel space and the user space. This means that even though the kernel
side might work as expected, the user space screws up and changes this flag
right between the send(2) is triggered when the flag is changed to
TP_STATUS_SENDING and a given skb is destructed after some time. Then, this
will hit the BUG macro. As David suggested, the best solution is to simply
remove this statement since it cannot be used for kernel side internal
consistency checks. I've tested it and the system still behaves /stable/ in
this case, so in accordance with the above comment, we should rather remove it.
Signed-off-by: NDaniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_send_skb() can send orphaned skb, so we must pass the net pointer to
avoid possible NULL dereference in error path.

Bug added by commit 3a7c384f (ipv4: tcp: unicast_sock should not
land outside of TCP stack)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 5d299f3d (net: ipv6: fix TCP early demux) added a
regression for ipv6_mapped case.

[   67.422369] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[   67.449678] SELinux: initialized (dev autofs, type autofs), uses
genfs_contexts
[   92.631060] BUG: unable to handle kernel NULL pointer dereference at
(null)
[   92.631435] IP: [<          (null)>]           (null)
[   92.631645] PGD 0
[   92.631846] Oops: 0010 [#1] SMP
[   92.632095] Modules linked in: autofs4 sunrpc ipv6 dm_mirror
dm_region_hash dm_log dm_multipath dm_mod video sbs sbshc battery ac lp
parport sg snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event
snd_seq snd_seq_device pcspkr snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer serio_raw button floppy snd i2c_i801 i2c_core soundcore
snd_page_alloc shpchp ide_cd_mod cdrom microcode ehci_hcd ohci_hcd
uhci_hcd
[   92.634294] CPU 0
[   92.634294] Pid: 4469, comm: sendmail Not tainted 3.6.0-rc1 #3
[   92.634294] RIP: 0010:[<0000000000000000>]  [<          (null)>]
(null)
[   92.634294] RSP: 0018:ffff880245fc7cb0  EFLAGS: 00010282
[   92.634294] RAX: ffffffffa01985f0 RBX: ffff88024827ad00 RCX:
0000000000000000
[   92.634294] RDX: 0000000000000218 RSI: ffff880254735380 RDI:
ffff88024827ad00
[   92.634294] RBP: ffff880245fc7cc8 R08: 0000000000000001 R09:
0000000000000000
[   92.634294] R10: 0000000000000000 R11: ffff880245fc7bf8 R12:
ffff880254735380
[   92.634294] R13: ffff880254735380 R14: 0000000000000000 R15:
7fffffffffff0218
[   92.634294] FS:  00007f4516ccd6f0(0000) GS:ffff880256600000(0000)
knlGS:0000000000000000
[   92.634294] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   92.634294] CR2: 0000000000000000 CR3: 0000000245ed1000 CR4:
00000000000007f0
[   92.634294] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   92.634294] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[   92.634294] Process sendmail (pid: 4469, threadinfo ffff880245fc6000,
task ffff880254b8cac0)
[   92.634294] Stack:
[   92.634294]  ffffffff813837a7 ffff88024827ad00 ffff880254b6b0e8
ffff880245fc7d68
[   92.634294]  ffffffff81385083 00000000001d2680 ffff8802547353a8
ffff880245fc7d18
[   92.634294]  ffffffff8105903a ffff88024827ad60 0000000000000002
00000000000000ff
[   92.634294] Call Trace:
[   92.634294]  [<ffffffff813837a7>] ? tcp_finish_connect+0x2c/0xfa
[   92.634294]  [<ffffffff81385083>] tcp_rcv_state_process+0x2b6/0x9c6
[   92.634294]  [<ffffffff8105903a>] ? sched_clock_cpu+0xc3/0xd1
[   92.634294]  [<ffffffff81059073>] ? local_clock+0x2b/0x3c
[   92.634294]  [<ffffffff8138caf3>] tcp_v4_do_rcv+0x63a/0x670
[   92.634294]  [<ffffffff8133278e>] release_sock+0x128/0x1bd
[   92.634294]  [<ffffffff8139f060>] __inet_stream_connect+0x1b1/0x352
[   92.634294]  [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
[   92.634294]  [<ffffffff8104b333>] ? wake_up_bit+0x25/0x25
[   92.634294]  [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
[   92.634294]  [<ffffffff8139f223>] ? inet_stream_connect+0x22/0x4b
[   92.634294]  [<ffffffff8139f234>] inet_stream_connect+0x33/0x4b
[   92.634294]  [<ffffffff8132e8cf>] sys_connect+0x78/0x9e
[   92.634294]  [<ffffffff813fd407>] ? sysret_check+0x1b/0x56
[   92.634294]  [<ffffffff81088503>] ? __audit_syscall_entry+0x195/0x1c8
[   92.634294]  [<ffffffff811cc26e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   92.634294]  [<ffffffff813fd3e2>] system_call_fastpath+0x16/0x1b
[   92.634294] Code:  Bad RIP value.
[   92.634294] RIP  [<          (null)>]           (null)
[   92.634294]  RSP <ffff880245fc7cb0>
[   92.634294] CR2: 0000000000000000
[   92.648982] ---[ end trace 24e2bed94314c8d9 ]---
[   92.649146] Kernel panic - not syncing: Fatal exception in interrupt

Fix this using inet_sk_rx_dst_set(), and export this function in case
IPv6 is modular.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit be9f4a44 (ipv4: tcp: remove per net tcp_sock) added a
selinux regression, reported and bisected by John Stultz

selinux_ip_postroute_compat() expect to find a valid sk->sk_security
pointer, but this field is NULL for unicast_sock

It turns out that unicast_sock are really temporary stuff to be able
to reuse  part of IP stack (ip_append_data()/ip_push_pending_frames())

Fact is that frames sent by ip_send_unicast_reply() should be orphaned
to not fool LSM.

Note IPv6 never had this problem, as tcp_v6_send_response() doesnt use a
fake socket at all. I'll probably implement tcp_v4_send_response() to
remove these unicast_sock in linux-3.7
Reported-by: NJohn Stultz <johnstul@us.ibm.com>
Bisected-by: NJohn Stultz <johnstul@us.ibm.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently leak all tcp metrics at struct net dismantle time.

tcp_net_metrics_exit() frees the hash table, we must first
iterate it to free all metrics.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not leak memory by updating pointer with potentially NULL realloc return value.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Memory is allocated for 'tt_change_node' with kmalloc().
'tt_change_node' may go out of scope really being used for anything
(except have a few members initialized) if we hit the 'del:' label.
This patch makes sure we free the memory in that case.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[Resending again, as the text was corrupted by the email client]

To speed up operations, QFQ internally divides classes into
groups. Which group a class belongs to depends on the ratio between
the maximum packet length and the weight of the class. Unfortunately
the function qfq_change_class lacks the steps for changing the group
of a class when the ratio max_pkt_len/weight of the class changes.

For example, when the last of the following three commands is
executed, the group of class 1:1 is not correctly changed:

tc disc add dev XXX root handle 1: qfq
tc class add dev XXX parent 1: qfq classid 1:1 weight 1
tc class change dev XXX parent 1: classid 1:1 qfq weight 4

Not changing the group of a class does not affect the long-term
bandwidth guaranteed to the class, as the latter is independent of the
maximum packet length, and correctly changes (only) if the weight of
the class changes. In contrast, if the group of the class is not
updated, the class is still guaranteed the short-term bandwidth and
packet delay related to its old group, instead of the guarantees that
it should receive according to its new weight and/or maximum packet
length. This may also break service guarantees for other classes.
This patch adds the missing operations.
Signed-off-by: NPaolo Valente <paolo.valente@unimore.it>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While investigating on network performance problems, I found this little
gem :

$ nm -v vmlinux | grep -1 dst_default_metrics
ffffffff82736540 b busy.46605
ffffffff82736560 B dst_default_metrics
ffffffff82736598 b dst_busy_list

Apparently, declaring a const array without initializer put it in
(writeable) bss section, in middle of possibly often dirtied cache
lines.

Since we really want dst_default_metrics be const to avoid any possible
false sharing and catch any buggy writes, I force a null initializer.

ffffffff818a4c20 R dst_default_metrics
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After IP route cache removal, I believe rcu_bh() has very little use and
we should remove this RCU variant, since it adds some cycles in fast
path.

Anyway, the call_rcu_bh() use in fib_true is obviously wrong, since
some users only assert rcu_read_lock().
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Quiets the sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 needs a cookie in dst_check() call.

We need to add rx_dst_cookie and provide a family independent
sk_rx_dst_set(sk, skb) method to properly support IPv6 TCP early demux.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some action modules free struct tcf_common in their error path
while estimator is still active. This results in est_timer()
dereference freed memory.
Add gen_kill_estimator() in ipt, pedit and simple action.
Signed-off-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__neigh_create() returns either a pointer to struct neighbour or PTR_ERR().
But the caller expects it to return either a pointer or NULL.  Replace
the NULL check with IS_ERR() check.

The bug was introduced in a263b309
("ipv4: Make neigh lookups directly in output packet path.").
Signed-off-by: NVasily Kulikov <segoon@openwall.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are freeing skb instead of nskb, resulting in a double
free on skb and a leak from nskb.
Signed-off-by: NSorin Dumitru <sdumitru@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix sparse warning:
	* symbol 'tcp_wfree' was not declared. Should it be static?
Signed-off-by: NSilviu-Mihai Popescu <silviupopescu1990@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a regression introduced by: 2265c141
("batman-adv: gateway election code refactoring")
Reported-by: NNicolás Echániz <nicoechaniz@codigosur.org>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Acked-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

libertas currently calls cfg80211_disconnected() when it is being
brought down. This causes an event to be allocated, but since the
wdev is already removed from the rdev by the time that the event
processing work executes, the event is never processed or freed.
http://article.gmane.org/gmane.linux.kernel.wireless.general/95666

Fix this leak, and other possible situations, by processing the event
queue when a device is being unregistered. Thanks to Johannes Berg for
the suggestion.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Cc: stable@vger.kernel.org
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

gact_rand array is accessed by gact->tcfg_ptype whose value
is assumed to less than MAX_RAND, but any range checks are
not performed.

So add a check in tcf_gact_init(). And in tcf_gact(), we can
reduce a branch.
Signed-off-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid crashing if the crypto key payload was NULL, as when it was not correctly
allocated and initialized.  Also, avoid leaking it.
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Restore the default state to the "beacon_found" flag when
the channel flags are restored.  Otherwise, we can end up
with a channel that we can no longer transmit on even when
we can see beacons on that channel.
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently the only way for wireless drivers to tell whether or not OFDM
is allowed on the current channel is to check the regulatory
information. However, this requires hodling cfg80211_mutex, which is not
visible to the drivers.

Other regulatory restrictions are provided as flags in the channel
definition, so let's do similarly with OFDM. This patch adds a new flag,
IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not
allowed. This flag is set on any channels for which regulatory indicates
that OFDM is prohibited.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Tested-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Remove unused includes after IP cache removal
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After SA is setup, one timer is armed to detect soft/hard expiration,
however the timer handler uses xtime to do the math. This makes hard
expiration occurs first before soft expiration after setting new date
with big interval. As a result new child SA is deleted before rekeying
the new one.
Signed-off-by: NFan Du <fdu@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>