- 17 7月, 2015 19 次提交
-
-
由 Dave Airlie 提交于
Merge branch 'drm-rockchip-2015-07-13' of https://github.com/markyzq/kernel-drm-rockchip into drm-fixes misc rockchip fixes. * 'drm-rockchip-2015-07-13' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: vop: remove hardware cursor window drm/rockchip: vop: switch cursor plane to window 3 drm/rockchip: Drop owner assignment from platform_driver drm/rockchip: use drm_gem_mmap helpers drm/rockchip: only call drm_fb_helper_hotplug_event if fb_helper present drm/rockchip: Add BGR formats to VOP
-
git://git.pengutronix.de/git/pza/linux由 Dave Airlie 提交于
imx-drm: fixes for parallel-display, imx-tve, and ipu-common These patches fix the parallel-display driver to use the standard OF graph bindings for connecting a drm_panel via device tree instead of an undocumented, driver specific device tree property, take care to disable all IPU interrupts before setting up the irq chip to fix a kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting the media bus format set by the imx-tve driver. * tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux: drm/imx: tve: fix media bus format for VGA output GPU: ipu: fix lockup caused by pending chained interrupts drm/imx: parallel-display: fix drm_panel support
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Dave Airlie 提交于
A range of fixes for the Armada DRM driver: - A missing wakeup could result in overlay frames being delayed, causing video playback to hiccup. - Avoid unmapping a dma-buf attachment which was never mapped - Fix the overlay when partially off the screen by switching to the drm_plane_helper_check_update() helper and using the calculated coordinates to set the start address. - Remove an incorrect assignment to crtc->mode - which should be the unadjusted mode. - Fix a missing call to drm_plane_cleanup() in the overlay code. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: avoid saving the adjusted mode to crtc->mode drm/armada: fix overlay when partially off-screen drm/armada: convert overlay to use drm_plane_helper_check_update() drm/armada: fix gem object free after failed prime import drm/armada: fix incorrect overlay plane cleanup drm/armada: fix missing overlay wake-up
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Next batch of i915 fixes. Note that the compat32 patch here needs the drm core one to be actually useful, I'll send you that one with a separate drm-fixes pull request. One revert because a fix in -rc2 did break existing userspace. * tag 'drm-intel-fixes-2015-07-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Do not call intel_crtc_disable if the crtc is already disabled. Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" drm/i915: Forward all core DRM ioctls to core compat handling drm/i915: fix oops in primary_check_plane drm/i915: remove unused has_dma_mapping flag drm/i915: Fix missing return warning for !CONFIG_DEBUGFS drm/i915: avoid leaking DMA mappings drm/i915: Snapshot seqno of most recently submitted request. drm/i915: Store device pointer in contexts for late tracepoint usafe
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Ok next attempt at drm-fixes pull. Big thing really is just the compat32 one for addfb2.1. * tag 'topic/drm-fixes-2015-07-16' of git://anongit.freedesktop.org/drm-intel: drm: Provide compat ioctl for addfb2.1 Documentation: drm: Fix tablulation in KMS properties table drm: add a check for x/y in drm_mode_setcrtc drm/rockchip: use drm_gem_mmap helpers
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
More radeon and amdgpu fixes for 4.2. Mostly amdgpu bug fixes. * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu/dce8: Re-set VBLANK interrupt state when enabling a CRTC drm/radeon/ci: silence a harmless PCC warning drm/amdgpu/cz: silence some dpm debug output drm/amdgpu/cz: store the forced dpm level drm/amdgpu/cz: unforce dpm levels before forcing to low/high drm/amdgpu: remove bogus check in gfx8 rb setup drm/amdgpu: set proper index/data pair for smc regs on CZ (v2) drm/amdgpu: disable the IP module if early_init returns -ENOENT (v2) drm/amdgpu: stop context leak in the error path drm/amdgpu: validate the context id in the dependencies drm/radeon: fix user ptr race condition drm/radeon: Don't flush the GART TLB if rdev->gart.ptr == NULL drm/radeon: add a dpm quirk for Sapphire Radeon R9 270X 2GB GDDR5
-
由 Michel Dänzer 提交于
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK register while the CRTC is off, which caused e.g. glxgears or gnome-shell to hang after a modeset. Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
-
由 Alex Deucher 提交于
This has been a source of confusion. Make it debug only. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
So the selected forced level shows up properly in sysfs. Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This is necessary to properly reset the min/max limits before clamping them otherwise we may get improper clamping depending on what what was the last forced level. Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Always respect the harvest configuration as is. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
v2: squash in later fix Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we run into a part with a harvest configuration where the entire IP block is unusable, just disable the IP block. v2: fix logic as noted by Christian Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
-
由 Christian König 提交于
Just to make sure userspace don't send nonsense to the kernel. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
-
由 Christian König 提交于
Port of amdgpu patch 9298e52f. Signed-off-by: NChristian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
This can be the case when the GPU is powered off, e.g. via vgaswitcheroo or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin flushes the TLB after setting rdev->gart.ptr to non-NULL. Fixes panic on powering off R7xx GPUs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 16 7月, 2015 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull TPM bugfixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm, tpm_crb: fail when TPM2 ACPI table contents look corrupted tpm: Fix initialization of the cdev
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "Mainly fix-ups for the various 4.2 items" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits) IB/core: Destroy ocrdma_dev_id IDR on module exit IB/core: Destroy multcast_idr on module exit IB/mlx4: Optimize do_slave_init IB/mlx4: Fix memory leak in do_slave_init IB/mlx4: Optimize freeing of items on error unwind IB/mlx4: Fix use of flow-counters for process_mad IB/ipath: Convert use of __constant_<foo> to <foo> IB/ipoib: Set MTU to max allowed by mode when mode changes IB/ipoib: Scatter-Gather support in connected mode IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush IB/ucma: Fix lockdep warning in ucma_lock_files rds: rds_ib_device.refcount overflow RDMA/nes: Fix for incorrect recording of the MAC address RDMA/nes: Fix for resolving the neigh RDMA/core: Fixes for port mapper client registration IB/IPoIB: Fix bad error flow in ipoib_add_port() IB/mlx4: Do not attemp to report HCA clock offset on VFs IB/cm: Do not queue work to a device that's going away IB/srp: Avoid using uninitialized variable ...
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking updates from Jeff Layton: "I had thought that I was going to get away without a pull request this cycle. There was a NFSv4 file locking problem that cropped up that I tried to fix in the NFSv4 code alone, but that fix has turned out to be problematic. These patches fix this in the correct way. Note that this touches some NFSv4 code as well. Ordinarily I'd wait for Trond to ACK this, but he's on holiday right now and the bug is rather nasty. So I suggest we merge this and if he raises issues with it we can sort it out when he gets back" Acked-by: NBruce Fields <bfields@fieldses.org> Acked-by: NDan Williams <dan.j.williams@intel.com> [ +1 to this series fixing a 100% reproducible slab corruption + general protection fault in my nfs-root test environment. - Dan ] Acked-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> * tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux: locks: inline posix_lock_file_wait and flock_lock_file_wait nfs4: have do_vfs_lock take an inode pointer locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait locks: have flock_lock_file take an inode pointer instead of a filp Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: - Fix FPU refactoring ("kvm: x86: fix load xsave feature warning") - Fix eager FPU mode (Cc stable) - AMD bits of MTRR virtualization * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: fix load xsave feature warning KVM: x86: apply guest MTRR virtualization on host reserved pages KVM: SVM: Sync g_pat with guest-written PAT value KVM: SVM: use NPT page attributes KVM: count number of assigned devices KVM: VMX: fix vmwrite to invalid VMCS KVM: x86: reintroduce kvm_is_mmio_pfn x86: hyperv: add CPUID bit for crash handlers
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: - Makefile changes (top-level+ARC) reinstates -O3 builds (regression since 3.16) - IDU intc related fixes, IRQ affinity - patch to make bitops safer for ARC - perf fix from Alexey to remove signed PC braino - Futex backend gets llock/scond support * tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: support HS38 releases ARC: make sure instruction_pointer() returns unsigned value ARC: slightly refactor macros for boot logging ARC: Add llock/scond to futex backend arc:irqchip: prepare for drivers/irqchip/irqchip.h removal ARC: Make ARC bitops "safer" (add anti-optimization) ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler ARCv2: intc: IDU: support irq affinity ARC: fix unused var wanring ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO ARC: Override toplevel default -O2 with -O3 kbuild: Allow arch Makefiles to override {cpp,ld,c}flags ARCv2: guard SLC DMA ops with spinlock ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "One improvement for the zcrypt driver, the quality attribute for the hwrng device has been missing. Without it the kernel entropy seeding will not happen automatically. And six bug fixes, the most important one is the fix for the vector register corruption due to machine checks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/nmi: fix vector register corruption s390/process: fix sfpc inline assembly s390/dasd: fix kernel panic when alias is set offline s390/sclp: clear upper register halves in _sclp_print_early s390/oprofile: fix compile error s390/sclp: fix compile error s390/zcrypt: enable s390 hwrng to seed kernel entropy
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux由 Linus Torvalds 提交于
Pull final init.h/module.h code relocation from Paul Gortmaker: "With the release of 4.2-rc2 done, we should not be seeing any new code added that gets upset by this small code move, and we've banked yet another complete week of testing with this move in place on top of 4.2-rc1 via linux-next to ensure that remained true. Given that, I'd like to put it in now so that people formulating new work for 4.3-rc1 will be exposed to the ever so slightly stricter (but sensible) requirements wrt. whether they are needing init.h vs. module.h macros, even if they are not using linux-next. The diffstat of the move is slightly asymmetrical due to needing to leave behind a couple #ifdef in the old location and add the same ones to the new location, but other than that, it is a 1:1 move, complete with the module_init/exit trailing semicolon that we can't fix. That is, until/unless someone does a tree-wide sed fix of all the approximately 800 currently in tree users relying on it" * tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: module: relocate module_init from init.h to module.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fix from Steven Rostedt: "Fengguang Wu discovered a crash that happened to be because of the branch tracer (traces unlikely and likely branches) when enabled with certain debug options. What happened was that various debug options like lockdep and DEBUG_PREEMPT can cause parts of the branch tracer to recurse outside its recursion protection. In fact, part of its recursion protection used these features that caused the lockup. This cleans up the code a little and makes the recursion protection a bit more robust" * tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have branch tracer use recursive field of task struct
-
- 15 7月, 2015 13 次提交
-
-
由 Russell King 提交于
We're not supposed to store the adjusted mode into crtc->mode. We don't use it anyway, so we can safely remove this. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Fix the start address calculation when overlay is partially off screen. fb->bits_per_pixel is not set for YUV formats, and is always zero, which led to the first component always starting at zero. Use drm_format_plane_cpp() instead. This also revealed a problem in that YUYV formats toggle the U/V data for odd pixel start address offsets. We try to rectify that by toggling the U/V swap, which for the most part works, but seemingly introduces a flicker for one scan frame of swapped U/V. However, these changes result in an overall improvement. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Use drm_plane_helper_check_update() rather than our own code to validate and limit the size of the displayed image. As we are able to support scaling, permit the full scaling ability. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Fix the gem object freeing after a partial import of a dma buffer, eg, one which has been imported, but not mapped. This was provoking a warning from the dma_buf code. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The Armada overlay plane wasn't being properly cleaned up as it was missing a call to drm_plane_cleanup(). It also wasn't freeing the right type of pointer (although we were still freeing the right pointer value.) Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Nothing was waking up the overlay plane wait queue, so we were fully reliant on the HZ/25 wait timing out to make progress. Fix the lack of wake-up. We were also mis-handling the wait_event_timeout() return value - this returns an unsigned integer of the remaining time, or zero on timeout and the condition evaluated false. Checking this for less than zero is not sane. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
-
由 Tvrtko Ursulin 提交于
Frame buffer modifiers extensions provided in; commit e3eb3250 Author: Rob Clark <robdclark@gmail.com> Date: Thu Feb 5 14:41:52 2015 +0000 drm: add support for tiled/compressed/etc modifier in addfb2 Missed the structure packing/alignment problem where 64-bit members were added after the odd number of 32-bit ones. This makes the compiler produce structures of different sizes under 32- and 64-bit x86 targets and makes the ioctl need explicit compat handling. v2: Removed the typedef. (Daniel Vetter) Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: stable@vger.kernel.org [danvet: Squash in compile fix from Mika.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Johannes Thumshirn 提交于
Destroy ocrdma_dev_id IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Johannes Thumshirn 提交于
Destroy multcast_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Doug Ledford 提交于
There is little chance our memory allocation will fail, so we can combine initializing the work structs with allocating them instead of looping through all of them once to allocate and again to initialize. Then when we need to actually find out if our device is up or in the process of going down, have all of our work structs batched up, take the spin_lock once and only once, and do all of the batch under the one spin_lock invocation instead of incurring all of the locked memory cycles we would otherwise incur to take/release the spin_lock over and over again. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Doug Ledford 提交于
We create a number of work structs to be queued up to a workqueue, and on completion of the workqueue handler, the workqueue handler frees the allocated memory. If, however, we don't queue the work struct because the device is going down, then we need to free the memory ourselves. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maninder Singh 提交于
On failure, we loop through all possible pointers and test them before calling kfree. But really, why even attempt to free items we didn't allocate when we can easily loop through exactly and only the devices for which the original memory allocation succeeded and free just those. Signed-off-by: NManinder Singh <maninder1.s@samsung.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-