ICL has two slices of DBuf, each slice of size 1024 blocks.
We should not always enable slice-2. It should be enabled only if
display total required BW is > 12GBps OR more than 1 pipes are enabled.

Changes since V1:
 - typecast total_data_rate to u64 before multiplication to solve any
   possible overflow (Rodrigo)
 - fix where skl_wm_get_hw_state was memsetting ddb, resulting
   enabled_slices to become zero
 - Fix the logic of calculating ddb_size
Changes since V2:
 - If no-crtc is part of commit required_slices will have value "0",
   don't try to disable DBuf slice.
Changes since V3:
 - Create a generic helper to enable/disable slice
 - don't return early if total_data_rate is 0, it may be cursor only
   commit, or atomic modeset without any plane.
Changes since V4:
 - Solve checkpatch warnings
 - use kernel types u8/u64 instead of uint8_t/uint64_t
Changes since V5:
 - Rebase
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-3-mahesh1.kumar@intel.com

This patch adds support to start tracking status of DBUF slices.
This is foundation to introduce support for enabling/disabling second
DBUF slice dynamically for ICL.

Changes Since V1:
 - use kernel type u8 over uint8_t
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426142517.16643-2-mahesh1.kumar@intel.com

These fields have been deprecated and moved in ICL+. Stop setting the
bits.

They have moved to GAMMA_MODE and CSC_MODE, respectively. This patch
is just to stop incorrectly setting bits in PLANE_COLOR_CTL while
we're waiting for the new replacement functionality to be done.

v2: Drop useless comment, and change !(GEN >= 11) to (GEN < 11). (Ville)

v3: No changes

v4 (from Paulo): Rebase.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NJames Ausmus <james.ausmus@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-2-paulo.r.zanoni@intel.com

Make the PIPE_CONF_CHECK macros a bit more robust by wrapping them
in do {} while(0). Avoids funky sirprises when you try put an 'else'
after a PIPE_CONF_CHECK invocation...
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316183625.16316-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc

Today we only want to pass along the priority to engine->schedule(), but
in the future we want to have much more control over the various aspects
of the GPU during a context's execution, for example controlling the
frequency allowed. As we need an ever growing number of parameters for
scheduling, move those into a struct for convenience.

v2: Move the anonymous struct into its own function for legibility and
ye olde gcc.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418184052.7129-3-chris@chris-wilson.co.uk

Adding a i915_fifo_underrun_reset debugfs file will make it possible
for IGT tests to clear FIFO underrun fallout at the start of each
subtest, and make re-enable FBC so tests always have maximum exposure
to features used by IGT. FIFO underruns and FBC bugs will no longer
hide when an earlier subtests disables both.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105685
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105681
Link: https://patchwork.freedesktop.org/patch/msgid/20180328100526.36467-1-maarten.lankhorst@linux.intel.comAcked-by: NJani Nikula <jani.nikula@linux.intel.com>
[mlankhorst: Reset FBC reason if underrun had occurred. (vivijim)]
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

All the references to get_existing_state can be converted to
get_new_state or get_old_state, which means that i915 is now
get_existing_state free.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409124656.39886-3-maarten.lankhorst@linux.intel.com
[mlankhorst: Fix alignment in prepare_plane_fb. (Ville)]
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made
less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series

v6: Rebased (me)
Fixed review comments from Paauwe, Bob J
Previous version, where a split of calculation
was done, was wrong. Fixed that issue here.

v7: Rebased (me)

v8: Rebased (me)

v9: Rebased (me)

v10: Rebased (me)

v11: Addressed review comments from Shashank Sharma
Alignment issues fixed.
When call to skl_update_scaler is made, 0 was being
sent instead of pixel_format.
When crtc update scaler is called, we dont have the
fb to derive the pixel format. Added the function
parameter bool plane_scaler_check to account for this.

v12: Fixed failure in IGT debugfs_test.
fb is NULL in skl_update_scaler_plane
Due to this, accessing fb->format caused failure.
Patch checks fb before using.

v13: In the previous version there was a flaw.
In skl_update_scaler during plane_scaler_check
if the format was non-NV12, it would set need_scaling
to false. This could reset the previously set need_scaling
from a previous condition check. Patch fixes this.
Patch also adds minimum src height for YUV 420 formats
to 16 (as defined in BSpec) and adds for checking this
range.

v14: Addressed review comments from Maarten
Just add a check for NV12 min src height in
skl_update_scaler and retain the remaining checks
as is. Added Reviewed By from Juha-Pekka Heikkila.

v15: Rebased the series.

v16: Changed fb height restriction to be >= 16 as per
Bspec. Earlier it was > 16.

v17: Adding src width and height to be mult of 4 restriction
to avoid pipe fifo underruns for NV12.

Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: NClinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NClinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Signed-off-by: NNabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-15-git-send-email-vidya.srinivas@intel.com

If the fb format is YUV, enable the plane CSC mode bits
for the conversion.

v2: Addressed review comments from Shashank Sharma
Alignment issue fixed in i915_reg.h

v3: Adding Reviewed By from Shashank Sharma

v4: Rebased the patch. As part of rebasing, re-using
the color series defines which are already merged.
plane_state->base.color_encoding might not be set for
NV12. For now, just using PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709
in glk_plane_color_ctl if format is NV12.

v5: Added reviewed by from Juha-Pekka Heikkila

v6: Rebased the series
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-12-git-send-email-vidya.srinivas@intel.com

Display WA 827 applies to GEN9 (excluede GLK) and CNL.
Switching the plane format from NV12 to RGB and leaving system idle
results in display underrun and corruption.
WA: Set the bit 15 & bit 19 to 1b in the CLKGATE_DIS_PSL
register for the pipe in which NV12 plane is enabled.

v2: Addressed review comments from Maarten and
Juha-Pekka Heikkila. Added reviewed by from
Juha-Pekka Heikkila.

v3: Rebased the series
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: NChandra Konduru <chandra.konduru@intel.com>
Signed-off-by: NNabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-11-git-send-email-vidya.srinivas@intel.com

For YUV 420 Planar formats like NV12,
buffer allocation is done for Y and UV surfaces separately.
For NV12 plane formats, the UV buffer
allocation must be programmed in the Plane Buffer Config register
and the Y buffer allocation must be programmed in the
Plane NV12 Buffer Config register. Both register values
should be verified during verify_wm_state.

v2: Addressed review comments by Maarten.

v3: Addressed review comments by Shashank Sharma.

v4: Adding reviewed by tag from Shashank Sharma

v5: Added reviewed by from Juha-Pekka Heikkila

v6: Rebased the series
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-5-git-send-email-vidya.srinivas@intel.com

Add support of recognizing DRM_FORMAT_NV12 from plane_format
register value.

v2: Added reviewed by tag from Mika Kahola

v3: Added reviewed by from Juha-Pekka Heikkila

v4: Rebased the series
Reviewed-by: NJuha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NMahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523245273-30264-4-git-send-email-vidya.srinivas@intel.com

If we skip the intel_prepare_reset(), we should also skip the
intel_display_reset(). If we we use a flag set by intel_prepare_reset()
then we do not have to second guess based on external user controlled
state whether or not the prepare was called before deciding to finish
it after the reset. igt/gem_eio is one such example that may tweak
i915.reset faster than the code is expecting, leading to

[  190.233528] =====================================
[  190.233534] WARNING: bad unlock balance detected!
[  190.233540] 4.16.0-rc7-g335ef9849310-drmtip_10+ #1 Tainted: G     U
[  190.233547] -------------------------------------
[  190.233553] gem_eio/1348 is trying to release lock (crtc_ww_class_acquire) at:
[  190.233569] [<ffffffff895c7810>] drm_modeset_acquire_fini+0x0/0x60
[  190.233575] but there are no more locks to release!
[  190.233580]
               other info that might help us debug this:
[  190.233588] 3 locks held by gem_eio/1348:
[  190.233592]  #0:  (&f->f_pos_lock){+.+.}, at: [<00000000ab90c784>] __fdget_pos+0x3a/0x50
[  190.233607]  #1:  (sb_writers#11){.+.+}, at: [<00000000e1529265>] vfs_write+0x188/0x1a0
[  190.233622]  #2:  (&attr->mutex){+.+.}, at: [<0000000011f40afe>] simple_attr_write+0x36/0xd0
[  190.233635]
               stack backtrace:
[  190.233644] CPU: 0 PID: 1348 Comm: gem_eio Tainted: G     U           4.16.0-rc7-g335ef9849310-drmtip_10+ #1
[  190.233655] Hardware name: Dell Inc.                 OptiPlex GX280               /0G8310, BIOS A04 02/09/2005
[  190.233664] Call Trace:
[  190.233674]  dump_stack+0x67/0x95
[  190.233682]  ? drm_modeset_backoff+0x1b0/0x1b0
[  190.233690]  print_unlock_imbalance_bug+0xd2/0xe0
[  190.233698]  ? drm_modeset_backoff+0x1b0/0x1b0
[  190.233704]  lock_release+0x23e/0x300
[  190.233712]  drm_modeset_acquire_fini+0x16/0x60
[  190.233835]  intel_finish_reset+0x72/0x160 [i915]
[  190.233894]  i915_reset_device+0x1e9/0x240 [i915]
[  190.233953]  ? __intel_get_crtc_scanline+0x1c0/0x1c0 [i915]
[  190.233962]  ? work_on_cpu_safe+0x50/0x50
[  190.234020]  i915_handle_error+0x1f2/0x470 [i915]
[  190.234031]  ? __might_fault+0x39/0x90
[  190.234037]  ? __might_fault+0x39/0x90
[  190.234099]  i915_wedged_set+0x7f/0xc0 [i915]
[  190.234107]  simple_attr_write+0xb0/0xd0
[  190.234117]  full_proxy_write+0x51/0x80
[  190.234125]  __vfs_write+0x21/0x140
[  190.234133]  ? rcu_read_lock_sched_held+0x6f/0x80
[  190.234140]  ? rcu_sync_lockdep_assert+0x29/0x50
[  190.234147]  ? __sb_start_write+0x152/0x1f0
[  190.234152]  ? __sb_start_write+0x168/0x1f0
[  190.234159]  vfs_write+0xbd/0x1a0
[  190.234166]  SyS_write+0x40/0xa0
[  190.234173]  ? do_syscall_64+0x19/0x1b0
[  190.234180]  do_syscall_64+0x6b/0x1b0
[  190.234188]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
[  190.234196] RIP: 0033:0x7f84c1b392b7
[  190.234201] RSP: 002b:00007f84b6755b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[  190.234211] RAX: ffffffffffffffda RBX: 0000000000000046 RCX: 00007f84c1b392b7
[  190.234218] RDX: 0000000000000002 RSI: 000055ec20abc8d6 RDI: 0000000000000046
[  190.234225] RBP: 000055ec20abc8d6 R08: 0000000000000000 R09: 0000000000000000
[  190.234231] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000002
[  190.234238] R13: 0000000000000000 R14: 00007f84b0000b20 R15: 000055ec20ce4eb8

Testcase: igt/gem_eio
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405123714.3638-1-chris@chris-wilson.co.uk

Replace all users of pll->flags to use pll->info.flags.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-7-lucas.demarchi@intel.com

Replace all users of pll->name to use pll->info->name.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-5-lucas.demarchi@intel.com

Replace all users of pll->funcs.* to use
pll->info->funcs->*. The extra indirection here is not on any critical
path and we can leave all const data together.
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320220637.21480-4-lucas.demarchi@intel.com

Gen11 supports upto 5k source scaling

v2: Re-factoring of code as per review
v3: Corrected max Vertical size and indentation
v4: Added max Vertical dst size in same patch
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NNabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323172419.24911-7-paulo.r.zanoni@intel.com

We don't use the enum i9xx_plane_id namespace on SKL+ anymore, so
do not initialize the related plane_to_crtc_mapping[] table either.

Actually the only remaining user of that table is the pre-g4x
watermark code, but no harm in initializing the table on all
pre-SKL platforms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305174122.17273-1-ville.syrjala@linux.intel.comReviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm_printk is used for both DRM_ERROR and DRM_DEBUG with unnecessary
arguments that can be removed by creating separate functins.

Create specific functions for these calls to reduce x86/64 defconfig
size by ~20k.

Modify the existing macros to use the specific calls.

new:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1876562	  44542	    995	19220999	 1d5433	(TOTALS)

old:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1897565	  44542	    995	1943102	 1da63e	(TOTALS)

Miscellanea:

o intel_display requires a change to use the specific calls.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/016b5cb84cede20fd0f91ed6965421d99fd5f2ce.1520978414.git.joe@perches.com

DRM_IOCTL_MODE_CURSOR results in frontbuffer flush before the cursor
plane MMIOs are written to. But this flush should not be necessary for
PSR as hardware tracking triggers PSR exit when MMIOs are written. As
for FBC, the spec says "Flips or changes to plane size and panning" cause
FBC to be nuked. Use origin == ORIGIN_FLIP so that features can ignore
cursor updates in their frontbuffer_flush implementations.

 /sys/kernel/debug/dri/0/i915_fbc_status shows
"Compressing: yes" when I move the cursor around.

v3: Use ORIGIN_FLIP now that pin_to_display does not flush frontbuffer.
v2: Update comment in i915_gem_object_pin_to_display_plane. (Chris)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307033420.3086-2-dhinakaran.pandiyan@intel.com

i915_gem_obj_pin_to_display() calls frontbuffer_flush with origin set to
DIRTYFB. The callers however are at a vantage point to decide if hardware
frontbuffer tracking can do the flush for us. For example, legacy cursor
updates, like flips, write to MMIO registers, which then triggers PSR flush
by the hardware. Moving frontbuffer_flush out will enable us to skip a
software initiated flush by setting origin to FLIP. Thanks to Chris for the
idea.

v2:
Rebased due to Ville adding intel_plane_pin_fb().
Minor code reordering as fb_obj_flush doesn't need struct_mutex (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307033420.3086-1-dhinakaran.pandiyan@intel.com

This will get rid of the following error:
[   74.730271] WARNING: CPU: 4 PID: 0 at drivers/gpu/drm/drm_vblank.c:614 drm_calc_vbltimestamp_from_scanoutpos+0x13e/0x2f0
[   74.730311] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel crct10dif_pclmul snd_hda_codec crc32_pclmul snd_hwdep broadcom ghash_clmulni_intel snd_hda_core bcm_phy_lib snd_pcm tg3 lpc_ich mei_me mei prime_numbers
[   74.730353] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G     U           4.16.0-rc2-CI-CI_DRM_3822+ #1
[   74.730355] Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
[   74.730359] RIP: 0010:drm_calc_vbltimestamp_from_scanoutpos+0x13e/0x2f0
[   74.730361] RSP: 0018:ffff88022fb03d10 EFLAGS: 00010086
[   74.730365] RAX: ffffffffa0291d20 RBX: ffff88021a180000 RCX: 0000000000000001
[   74.730367] RDX: ffffffff820e7db8 RSI: 0000000000000001 RDI: ffffffff82068cea
[   74.730369] RBP: ffff88022fb03d70 R08: 0000000000000000 R09: ffffffff815d26d0
[   74.730371] R10: 0000000000000000 R11: ffffffffa0161ca0 R12: 0000000000000001
[   74.730373] R13: ffff880212448008 R14: ffff880212448330 R15: 0000000000000000
[   74.730376] FS:  0000000000000000(0000) GS:ffff88022fb00000(0000) knlGS:0000000000000000
[   74.730378] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   74.730380] CR2: 000055edcbec9000 CR3: 0000000002210001 CR4: 00000000000606e0
[   74.730382] Call Trace:
[   74.730385]  <IRQ>
[   74.730397]  drm_get_last_vbltimestamp+0x36/0x50
[   74.730401]  drm_update_vblank_count+0x64/0x240
[   74.730409]  drm_crtc_accurate_vblank_count+0x41/0x90
[   74.730453]  display_pipe_crc_irq_handler+0x176/0x220 [i915]
[   74.730497]  i9xx_pipe_crc_irq_handler+0xfe/0x150 [i915]
[   74.730537]  ironlake_irq_handler+0x618/0xa30 [i915]
[   74.730548]  __handle_irq_event_percpu+0x3c/0x340
[   74.730556]  handle_irq_event_percpu+0x1b/0x50
[   74.730561]  handle_irq_event+0x2f/0x50
[   74.730566]  handle_edge_irq+0xe4/0x1b0
[   74.730572]  handle_irq+0x11/0x20
[   74.730576]  do_IRQ+0x5e/0x120
[   74.730584]  common_interrupt+0x84/0x84
[   74.730586]  </IRQ>
[   74.730591] RIP: 0010:cpuidle_enter_state+0xaa/0x350
[   74.730593] RSP: 0018:ffffc9000008beb8 EFLAGS: 00000212 ORIG_RAX: ffffffffffffffde
[   74.730597] RAX: ffff880226b80040 RBX: 000000000031fc3e RCX: 0000000000000001
[   74.730599] RDX: 0000000000000000 RSI: ffffffff8210fb59 RDI: ffffffff820c02e7
[   74.730601] RBP: 0000000000000004 R08: 00000000000040af R09: 0000000000000018
[   74.730603] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[   74.730606] R13: ffffe8ffffd00430 R14: 0000001166120bf4 R15: ffffffff82294460
[   74.730621]  ? cpuidle_enter_state+0xa6/0x350
[   74.730629]  do_idle+0x188/0x1d0
[   74.730636]  cpu_startup_entry+0x14/0x20
[   74.730641]  start_secondary+0x129/0x160
[   74.730646]  secondary_startup_64+0xa5/0xb0
[   74.730660] Code: e1 48 c7 c2 b8 7d 0e 82 be 01 00 00 00 48 c7 c7 ea 8c 06 82 e8 64 ec ff ff 48 8b 83 c8 07 00 00 48 83 78 28 00 0f 84 e2 fe ff ff <0f> 0b 45 31 ed e9 db fe ff ff 41 b8 d3 4d 62 10 89 c8 6a 03 41
[   74.730754] ---[ end trace 14b1345705b68565 ]---

Changes since v1:
- Don't try to apply CRC workaround when enabling pipe, it should already be enabled.
Changes since v2:
- Make crc functions for !DEBUGFS case inline.
- Pass intel_crtc to crc functions.
- Add comments to callsites.
Changes since v3:
- Cache selected source to pipe_crc->source.
- Set pipe_crc->skipped to MIN_INT during disable to close a race condition.
Changes since v4:
- Handle fallout from setting pipe_crc->source in irq handler.

Cc: Marta Löfstedt <marta.lofstedt@intel.com>
Reported-by: NMarta Löfstedt <marta.lofstedt@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105185Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180308120202.52446-1-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Move the plane clip rectangle handling into
drm_atomic_helper_check_plane_state(). Drivers no longer
have to worry about such mundane details.

v2: Convert armada, rcar, and sun4i as well
v3: Resolve simple_kms_helper conflict

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com
Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx
Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson
Acked-by: Shawn Guo <shawnguo@kernel.org> #zte

If we fail to acquire a fence when we must, we must unwind before
reporting the error. Otherwise, we lose tracking of the vma pinning and
eventually hit a bug like

<3>[   46.163202] i915_vma_unpin:333 GEM_BUG_ON(!i915_vma_is_pinned(vma))
<4>[   46.163424] ------------[ cut here ]------------
<2>[   46.163429] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:333!
<4>[   46.163444] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
<0>[   46.163451] Dumping ftrace buffer:
<0>[   46.163457] ---------------------------------
<0>[   46.163630]    <...>-84      1.... 46260767us : i915_gem_object_unpin_from_display_plane: i915_vma_unpin:333 GEM_BUG_ON(!i915_vma_is_pinned(vma))
<0>[   46.163635] ---------------------------------
<4>[   46.163638] Modules linked in: vgem i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich mei_me e1000e mei prime_numbers
<4>[   46.163667] CPU: 1 PID: 84 Comm: kworker/u16:1 Tainted: G     U           4.16.0-rc3-gc07ef2c77d14-kasan_18+ #1
<4>[   46.163671] Hardware name: Dell Inc. OptiPlex 755                 /0PU052, BIOS A08 02/19/2008
<4>[   46.163743] Workqueue: events_unbound intel_atomic_commit_work [i915]
<4>[   46.163809] RIP: 0010:i915_gem_object_unpin_from_display_plane+0x253/0x2f0 [i915]
<4>[   46.163813] RSP: 0018:ffff8800624cfb48 EFLAGS: 00010286
<4>[   46.163818] RAX: 000000000000000c RBX: ffff880064446c40 RCX: ffff8800653135b8
<4>[   46.163822] RDX: dffffc0000000000 RSI: 0000000000000054 RDI: ffff8800651e30d0
<4>[   46.163825] RBP: 00000000000003d0 R08: 0000000000000001 R09: ffff8800651e3158
<4>[   46.163829] R10: 0000000000000000 R11: ffff8800651e30f0 R12: 0000000000000001
<4>[   46.163832] R13: ffff880054c58620 R14: 0000000000000000 R15: dffffc0000000000
<4>[   46.163836] FS:  0000000000000000(0000) GS:ffff880066040000(0000) knlGS:0000000000000000
<4>[   46.163840] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[   46.163843] CR2: 00007f1fc6fb0000 CR3: 00000000526fe000 CR4: 00000000000006e0
<4>[   46.163846] Call Trace:
<4>[   46.163918]  intel_unpin_fb_vma+0xbd/0x300 [i915]
<4>[   46.163990]  intel_cleanup_plane_fb+0x99/0xc0 [i915]
<4>[   46.163998]  drm_atomic_helper_cleanup_planes+0x166/0x280
<4>[   46.164071]  intel_atomic_commit_tail+0x1594/0x33a0 [i915]
<4>[   46.164081]  ? process_one_work+0x66e/0x1460
<4>[   46.164151]  ? skl_update_crtcs+0x9c0/0x9c0 [i915]
<4>[   46.164157]  ? lock_acquire+0x13d/0x390
<4>[   46.164161]  ? lock_acquire+0x13d/0x390
<4>[   46.164169]  process_one_work+0x71a/0x1460
<4>[   46.164175]  ? __schedule+0x838/0x1e50
<4>[   46.164182]  ? pwq_dec_nr_in_flight+0x2b0/0x2b0
<4>[   46.164188]  ? _raw_spin_lock_irq+0xa/0x40
<4>[   46.164194]  worker_thread+0xdf/0xf60
<4>[   46.164204]  ? process_one_work+0x1460/0x1460
<4>[   46.164209]  kthread+0x2cf/0x3c0
<4>[   46.164213]  ? _kthread_create_on_node+0xa0/0xa0
<4>[   46.164218]  ret_from_fork+0x3a/0x50
<4>[   46.164227] Code: e8 78 d9 cd e8 48 8b 35 cc 9e 47 00 49 c7 c0 c0 31 84 c0 b9 4d 01 00 00 48 c7 c2 e0 80 84 c0 48 c7 c7 0e bb 57 c0 e8 5d 4b df e8 <0f> 0b 48 c7 c1 c0 30 84 c0 ba 4e 01 00 00 48 c7 c6 e0 80 84 c0
<1>[   46.164368] RIP: i915_gem_object_unpin_from_display_plane+0x253/0x2f0 [i915] RSP: ffff8800624cfb48

Fixes: 85798ac9 ("drm/i915: Fail if we can't get a fence for gen2/3 tiled scanout")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305103312.29492-1-chris@chris-wilson.co.uk

Add support for the COLOR_RANGE property on planes. This property
selects whether the input YCbCr data is to treated as limited range
or full range.

On most platforms this is a matter of setting the "YUV range correction
disable" bit, and on VLV/CHV we'll just have to program the color
correction logic to pass the data through unmodified.

v2: Rebase

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-9-ville.syrjala@linux.intel.com

Bring us forward from the stone age and switch our default YCbCr->RGB
conversion matrix to BT.709 from BT.601. I would expect most matrial
to be BT.709 these days.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Acked-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-8-ville.syrjala@linux.intel.com

Add support for the COLOR_ENCODING plane property which selects
the matrix coefficients used for the YCbCr->RGB conversion. Our
hardware can generally handle BT.601 and BT.709.

CHV pipe B sprites have a fully programmable matrix, so in theory
we could handle anything, but it doesn't seem all that useful to
expose anything beyond BT.601 and BT.709 at this time.

GLK can supposedly do BT.2020, but let's leave enabling that for
the future as well.

v2: Rename bit defines to match the spec more closely (Shashank)

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-7-ville.syrjala@linux.intel.com

On GLK the plane CSC controls moved into the COLOR_CTL register.
Update the code to progam the YCbCr->RGB CSC mode correctly when
faced with an YCbCr framebuffer.

The spec is rather confusing as it calls the mode "YUV601 to RGB709".
I'm going to assume that just means it's going to use the YCbCr->RGB
matrix as specified in BT.601 and doesn't actually change the gamut.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214192327.3250-6-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Moving the check upwards will mean we we no longer have to add planes
and connectors manually, because everything is handled correctly by
drm_atomic_helper_check_modeset() as intended.

[applied with whitespace changes to make sparse happy]
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221092808.30060-1-maarten.lankhorst@linux.intel.com

The core now checks that the plane supports the fb's format+modifier
combination, so we can drop the related checks from
skl_check_ccs_aux_surface(). These checks were specific to
SKL/KBL/BXT anyway.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-9-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>

We've replicated the fb pin/unpin code in a few places. Pull it into
convenint helpers.

Slight change in locking behaviour as intel_cleanup_plane_fb() now
grab struct_mutex unconditionally.

v2: Change the locking to be symmetric between pin and unpin

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-6-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

As only a subset of primary planes are FBC capable there's no need
to waste fences on all of them. So let's skip the fence if the plane
isn't even fbc capable.

In the future we might extend this to skip the fence even for FBC
capable planes if the crtc and/or plane state isn't suitable
for FBC.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-5-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Let's record the information whether a plane can do fbc or not under
struct inte_plane.

v2: Rebase due to i9xx_plane_id
    Handle BDW/HSW correctly
v3: Move inte_fbc_init() back since we depend on it happening
    even with i915.disable_display, and populate
    fbc->possible_framebuffer_bits directly from the
    plane init code instead
v4: Add note about plane A being tied to pipe A on HSW+

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221173101.19385-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-5-ville.syrjala@linux.intel.com

Currently we pin a fence on every plane doing tiled scanout. The
number of planes we have available is fast apporaching the number
of fences so we really should stop wasting them. Only FBC needs
the fence on gen4+, so let's use fences only for the primary planes
on those platforms.

v2: drop the tiling check from plane_uses_fence() as the obj is
    NULL during initial_plane_config() and we don't rally need the
    check since i915_vma_pin_fence() does the check anyway

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221184807.577-1-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Gen2/3 display engine depends on the fence for tiled scanout. So if we
fail to get a fence fail the entire operation.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221160235.11134-2-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

We want to de-emphasize the link between the request (dependency,
execution and fence tracking) from GEM and so rename the struct from
drm_i915_gem_request to i915_request. That is we may implement the GEM
user interface on top of requests, but they are an abstraction for
tracking execution rather than an implementation detail of GEM. (Since
they are not tied to HW, we keep the i915 prefix as opposed to intel.)

In short, the spatch:
@@

@@
- struct drm_i915_gem_request
+ struct i915_request

A corollary to contracting the type name, we also harmonise on using
'rq' shorthand for local variables where space if of the essence and
repetition makes 'request' unwieldy. For globals and struct members,
'request' is still much preferred for its clarity.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Currently we make the unilateral decision inside
i915_gem_object_pin_to_display() where the VMA should resided (inside
the fence and mappable region or above?). This is not our decision to
make as it impacts on how the display engine can use the resulting
scanout object, and it would rather instruct us where to place the VMA so
that it can enable the features it wants. As such, make the pin flags an
argument to i915_gem_object_pin_to_display() and control them from
intel_pin_and_fence_fb_obj()

Whilst taking control of the mapping for ourselves, start tracking how
we use it to avoid trying to free a fence we never claimed:

<3>[  227.151869] GEM_BUG_ON(vma->fence->pin_count <= 0)
<4>[  227.152064] ------------[ cut here ]------------
<2>[  227.152068] kernel BUG at drivers/gpu/drm/i915/i915_vma.h:391!
<4>[  227.152084] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
<0>[  227.152092] Dumping ftrace buffer:
<0>[  227.152099]    (ftrace buffer empty)
<4>[  227.152102] Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm lpc_ich e1000e mei_me mei prime_numbers
<4>[  227.152131] CPU: 1 PID: 1587 Comm: kworker/u16:49 Tainted: G     U           4.16.0-rc1-gbab67b2f6177-kasan_7+ #1
<4>[  227.152134] Hardware name: Dell Inc. OptiPlex 755                 /0PU052, BIOS A08 02/19/2008
<4>[  227.152236] Workqueue: events_unbound intel_atomic_commit_work [i915]
<4>[  227.152292] RIP: 0010:intel_unpin_fb_vma+0x23a/0x2a0 [i915]
<4>[  227.152295] RSP: 0018:ffff88005aad7b68 EFLAGS: 00010286
<4>[  227.152300] RAX: 0000000000000026 RBX: ffff88005c359580 RCX: 0000000000000000
<4>[  227.152304] RDX: 0000000000000026 RSI: ffffffff8707d840 RDI: ffffed000b55af63
<4>[  227.152307] RBP: ffff880056817e58 R08: 0000000000000001 R09: 0000000000000000
<4>[  227.152311] R10: ffff88005aad7b88 R11: 0000000000000000 R12: ffff8800568184d0
<4>[  227.152314] R13: ffff880065b5ab08 R14: 0000000000000000 R15: dffffc0000000000
<4>[  227.152318] FS:  0000000000000000(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000
<4>[  227.152322] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[  227.152325] CR2: 00007f5fb25550a8 CR3: 0000000068c78000 CR4: 00000000000006e0
<4>[  227.152328] Call Trace:
<4>[  227.152385]  intel_cleanup_plane_fb+0x6b/0xd0 [i915]
<4>[  227.152395]  drm_atomic_helper_cleanup_planes+0x166/0x280
<4>[  227.152452]  intel_atomic_commit_tail+0x159d/0x3380 [i915]
<4>[  227.152463]  ? process_one_work+0x66e/0x1460
<4>[  227.152516]  ? skl_update_crtcs+0x9c0/0x9c0 [i915]
<4>[  227.152523]  ? lock_acquire+0x13d/0x390
<4>[  227.152527]  ? lock_acquire+0x13d/0x390
<4>[  227.152534]  process_one_work+0x71a/0x1460
<4>[  227.152540]  ? __schedule+0x815/0x1e20
<4>[  227.152547]  ? pwq_dec_nr_in_flight+0x2b0/0x2b0
<4>[  227.152553]  ? _raw_spin_lock_irq+0xa/0x40
<4>[  227.152559]  worker_thread+0xdf/0xf60
<4>[  227.152569]  ? process_one_work+0x1460/0x1460
<4>[  227.152573]  kthread+0x2cf/0x3c0
<4>[  227.152578]  ? _kthread_create_on_node+0xa0/0xa0
<4>[  227.152583]  ret_from_fork+0x3a/0x50
<4>[  227.152591] Code: c6 00 11 86 c0 48 c7 c7 e0 bd 85 c0 e8 60 e7 a9 c4 0f ff e9 1f fe ff ff 48 c7 c6 40 10 86 c0 48 c7 c7 e0 ca 85 c0 e8 2b 95 bd c4 <0f> 0b 48 89 ef e8 4c 44 e8 c4 e9 ef fd ff ff e8 42 44 e8 c4 e9
<1>[  227.152720] RIP: intel_unpin_fb_vma+0x23a/0x2a0 [i915] RSP: ffff88005aad7b68

v2: i915_vma_pin_fence() is a no-op if a fence isn't required, so check
vma->fence as well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-2-chris@chris-wilson.co.uk

i965 and g4x still have the pipe select bits in the plane control
registers, they're just hardcoded to select a specific pipe. However
plane C on i965 can still move between the pipes, thus we should
program the pipe select bits on i965 if we want to expose plane C
some day.

Since there is no harm in programming the bits on any plane on
i965/g4x let's just always set them. This will also make our
pre-computed register value match what the hardware register
would read, should we want to cross check the two.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-2-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>

G4x cursor control registers still allow us to write to the pipe select
bits even though cursors are supposed to be fixed to a specific pipe.
Bspec tells us that we should only ever write 0 to these bits. Let's
follow that recommendation. On ilk+ the bits become hardwired to 0.

Also looks like ICL repurposes these bits for some other use, so
we had better stop setting them to bogus values there.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-1-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>

Hitting the failure path through check_digital_port_conflicts triggers:

================================================
WARNING: lock held when returning to user space!
4.16.0-rc1-CI-kasan_1+ #1 Tainted: G        W
------------------------------------------------
kms_3d/1439 is leaving the kernel with locks still held!
1 lock held by kms_3d/1439:
 #0:  (drm_connector_list_iter){.+.+}, at: [<000000003745d183>] intel_atomic_check+0x1d9d/0x3ff0 [i915]

Rearrange the code to have a single exit path through the unlock.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180215091425.42364-1-maarten.lankhorst@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>