In the current nilfs, page cache for btree nodes and meta data files
do not set a valid back pointer to the host inode in mapping->host.

This will change it so that every address space in nilfs uses
mapping->host to hold its host inode.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This replaces all references of NILFS_I_NILFS(inode)->ns_bdev with
inode->i_sb->s_bdev and unfolds remaining uses of NILFS_I_NILFS inline
function.

Before 2.6.37, referring to a nilfs object from inodes needed a
conditional judgement, and NILFS_I_NILFS was helpful to simplify it.
But now we can simply do it by going through a super block instance
like inode->i_sb->s_fs_info.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This uses list_first_entry macro instead of list_entry if it's used to
get the first entry.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Applies empty_aops for address space operations of gc-inodes.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds resize ioctl which makes online resize possible.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

When shrinking the filesystem, segments to be truncated must be test
if they are busy or not, and unneeded sufile block should be deleted.
This adds routines for the truncation.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

After resizing the filesystem, the secondary super block must be moved
to a new location.  This adds a helper function for this.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This adds a new ioctl command which limits range of segment to be
allocated.  This is intended to gather data whithin a range of the
partition before shrinking the filesystem, or to control new log
location for some purpose.

If a range is specified by the ioctl, segment allocator of nilfs tries
to allocate new segments from the range unless no free segments are
available there.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The super root block is newly-allocated each time it is written back
to disk, so unused portion of the block should be cleared.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The size of super root structure depends on inode size, so
NILFS_SR_BYTES macro should be a function of the inode size.  This
fixes the issue.

Even though a different size value will be written for a possible
future filesystem with extended inode, but fortunately this does not
break disk format compatibility.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Previously, nilfs was cloning pages for mmapped region to freeze their
data and ensure consistency of checksum during writeback cycles.  A
private page allocator was used for this page cloning.  But, we no
longer need to do that since clear_page_dirty_for_io function sets up
pte so that vm_ops->page_mkwrite function is called right before the
mmapped pages are modified and nilfs_page_mkwrite function can safely
wait for the pages to be written back to disk.

So, this stops making a copy of mmapped pages during writeback, and
eliminates the private page allocation and deallocation functions from
nilfs.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Merge list_del() + list_add_tail() to list_move_tail().
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

After having applied commit 9954e7af ("nilfs2: add free
entries count only if clear bit operation succeeded"), a free routine
of nilfs came to fall into an infinite loop, outputting the same
message endlessly:

 nilfs_palloc_freev: entry number 29497 already freed
 nilfs_palloc_freev: entry number 29497 already freed
 nilfs_palloc_freev: entry number 29497 already freed
 nilfs_palloc_freev: entry number 29497 already freed
 nilfs_palloc_freev: entry number 29497 already freed ...

That patch broke the routine so that a loop counter is never updated
in an abnormal state.  This fixes the regression.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

With the ->sync_page() hook gone, we have a few users that
add their own static address_space_operations without any
functions defined.

fs/inode.c already has an empty_aops that it uses for init
purposes. Lets export that and use it in the places where
an otherwise empty aops was defined.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Fixes whitespace coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs in 2.6.39-rc1 hit the following oops:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
 IP: [<ffffffff810ac235>] try_to_release_page+0x2a/0x3d
 PGD 234cb6067 PUD 234c72067 PMD 0
 Oops: 0000 [#1] SMP
 <snip>
 Process truncate (pid: 10995, threadinfo ffff8802353c2000, task ffff880234cfa000)
 Stack:
  ffff8802333c77b8 ffffffff810b64b0 0000000000003802 ffffffffa0052cca
  0000000000000000 ffff8802353c3b58 0000000000000000 ffff8802353c3b58
  0000000000000001 0000000000000000 ffffea0007b92308 ffffea0007b92308
 Call Trace:
  [<ffffffff810b64b0>] ? invalidate_inode_pages2_range+0x15f/0x273
  [<ffffffffa0052cca>] ? nilfs_palloc_get_block+0x2d/0xaf [nilfs2]
  [<ffffffff810589e7>] ? bit_waitqueue+0x14/0xa1
  [<ffffffff81058ab1>] ? wake_up_bit+0x10/0x20
  [<ffffffffa00433fd>] ? nilfs_forget_buffer+0x66/0x7a [nilfs2]
  [<ffffffffa00467b8>] ? nilfs_btree_concat_left+0x5c/0x77 [nilfs2]
  [<ffffffffa00471fc>] ? nilfs_btree_delete+0x395/0x3cf [nilfs2]
  [<ffffffffa00449a3>] ? nilfs_bmap_do_delete+0x6e/0x79 [nilfs2]
  [<ffffffffa0045845>] ? nilfs_btree_last_key+0x14b/0x15e [nilfs2]
  [<ffffffffa00449dd>] ? nilfs_bmap_truncate+0x2f/0x83 [nilfs2]
  [<ffffffffa0044ab2>] ? nilfs_bmap_last_key+0x35/0x62 [nilfs2]
  [<ffffffffa003e99b>] ? nilfs_truncate_bmap+0x6b/0xc7 [nilfs2]
  [<ffffffffa003ee4a>] ? nilfs_truncate+0x79/0xe4 [nilfs2]
  [<ffffffff810b6c00>] ? vmtruncate+0x33/0x3b
  [<ffffffffa003e8f1>] ? nilfs_setattr+0x4d/0x8c [nilfs2]
  [<ffffffff81026106>] ? do_page_fault+0x31b/0x356
  [<ffffffff810f9d61>] ? notify_change+0x17d/0x262
  [<ffffffff810e5046>] ? do_truncate+0x65/0x80
  [<ffffffff810e52af>] ? sys_ftruncate+0xf1/0xf6
  [<ffffffff8132c012>] ? system_call_fastpath+0x16/0x1b
 Code: c3 48 83 ec 08 48 8b 17 48 8b 47 18 80 e2 01 75 04 0f 0b eb fe 48 8b 17 80 e6 20 74 05 31 c0 41 59 c3 48 85 c0 74 11 48 8b 40 58
  8b 40 48 48 85 c0 74 04 41 58 ff e0 59 e9 b1 b5 05 00 41 54
 RIP  [<ffffffff810ac235>] try_to_release_page+0x2a/0x3d
  RSP <ffff8802353c3b08>
 CR2: 0000000000000048

This oops was brought in by the change "block: remove per-queue
plugging" (commit: 7eaceacc).  It initializes mapping->a_ops
with a NULL pointer for some pages in nilfs (e.g. btree node pages),
but mm code doesn't NULL pointer checks against mapping->a_ops. (the
check is done for each callback function)

This corrects the aops initialization and fixes the oops.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: NJens Axboe <jaxboe@fusionio.com>

From the result of a function test of mmap, mmap write to shared pages
turned out to be broken for hole blocks.  It doesn't write out filled
blocks and the data will be lost after umount.  This is due to a bug
that the target file is not queued for log writer when filling hole
blocks.

Also, nilfs_page_mkwrite function exits normal code path even after
successfully filled hole blocks due to a change of block_page_mkwrite
function; just after nilfs was merged into the mainline,
block_page_mkwrite() started to return VM_FAULT_LOCKED instead of zero
by the patch "mm: close page_mkwrite races" (commit:
b827e496).  The current nilfs_page_mkwrite() is not handling
this value properly.

This corrects nilfs_page_mkwrite() and will resolve the data loss
problem in mmap write.

[This should be applied to every kernel since 2.6.30 but a fix is
 needed for 2.6.37 and prior kernels]
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org>  [2.6.38]

And give it a kernel-doc comment.

[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h.  This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This directly uses sb->s_fs_info to keep a nilfs filesystem object and
fully removes the intermediate nilfs_sb_info structure.  With this
change, the hierarchy of on-memory structures of nilfs will be
simplified as follows:

Before:
  super_block
       -> nilfs_sb_info
             -> the_nilfs
                   -> cptree --+-> nilfs_root (current file system)
                               +-> nilfs_root (snapshot A)
                               +-> nilfs_root (snapshot B)
                               :
             -> nilfs_sc_info (log writer structure)
After:
  super_block
       -> the_nilfs
             -> cptree --+-> nilfs_root (current file system)
                         +-> nilfs_root (snapshot A)
                         +-> nilfs_root (snapshot B)
                         :
             -> nilfs_sc_info (log writer structure)

The reason why we didn't design so from the beginning is because the
initial shape also differed from the above.  The early hierachy was
composed of "per-mount-point" super_block -> nilfs_sb_info pairs and a
shared nilfs object.  On the kernel 2.6.37, it was changed to the
current shape in order to unify super block instances into one per
device, and this cleanup became applicable as the result.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This replaces sbi uses with direct reference to sb instance.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Removes sci->sc_sbi which is a back pointer to nilfs_sb_info struct
from log writer object (nilfs_sc_info).
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Log writer is held by the nilfs_sb_info structure.  This moves it into
nilfs object and replaces all uses of NILFS_SC() accessor.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Moves s_next_generation counter and a spinlock protecting it to nilfs
object from nilfs_sb_info structure.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Moves s_inode_lock spinlock and s_dirty_files list to nilfs object
from nilfs_sb_info structure.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This moves four parameter variables on nilfs_sb_info s_resuid,
s_resgid, s_interval and s_watermark to the nilfs object.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This moves mount_opt local variable to nilfs object from nilfs_sb_info
struct.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This records the number of used blocks per checkpoint in each
checkpoint entry of cpfile.  Even though userland tools can get the
block count via nilfs_get_cpinfo ioctl, it was not updated by the
nilfs2 kernel code.  This fixes the issue and makes it available for
userland tools to calculate used amount per checkpoint.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>

This is a similar change to those in ext2/ext3 codebase (commit
40a063f6 and a4ae3094, respectively).

The addition of 64k block capability in the rec_len_from_disk and
rec_len_to_disk functions added a bit of math overhead which slows
down file create workloads needlessly when the architecture cannot
even support 64k blocks.  This will cut the corner.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

At present, the same warning message can be output twice when nilfs
detected a problem on super blocks:

 NILFS warning: broken superblock. using spare superblock.
 NILFS warning: broken superblock. using spare superblock.
 ...

This is because these super blocks are reloaded with the block size
written in a super block if it differs from the first block size, but
this repetition looks somewhat confusing.  So, we hint at what is
going on by appending block size information to those messages.
Reported-by: NWakko Warner <wakko@animx.eu.org>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

The current FS_IOC_GETFLAGS/SETFLAGS/GETVERSION will fail if
application is 32 bit and kernel is 64 bit.

This issue is avoidable by adding compat_ioctl method.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Add support for the standard attributes set via chattr and read via
lsattr.  These attributes are already in the flags value in the nilfs2
inode, but currently we don't have any ioctl commands that expose them
to the userland.

Collaterally, this adds the FS_IOC_GETVERSION ioctl for getting
i_generation, which allows users to list the file's generation number
with "lsattr -v".
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Nilfs has few rectrictions on which flags may be set on which inodes
like ext2/3/4 filesystems used to be.  Specifically DIRSYNC may only
be set on directories and IMMUTABLE and APPEND may not be set on
links.  Tighten that to disallow TOPDIR being set on non-directories
and only NODUMP and NOATIME to be set on non-regular file,
non-directories.

This introduces a flags masking function like those of extN and uses
it during inode creation.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

At present, nilfs marks S_NOATIME flag on all inodes.  This restricts
nilfs_set_inode_flags function so that it marks S_NOATIME only if a
given inode has an FS_NOATIME_FL flag.

Although nilfs does not support atime yet, touch_atime() still safely
returns on IS_NOATIME check since MS_NOATIME is always set on sb.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Replaces uses of own inode flags (i.e. NILFS_SECRM_FL, NILFS_UNRM_FL,
NILFS_COMPR_FL, and so forth) with common inode flags, and removes the
own flag declarations.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Three functions of the current persistent object allocator,
nilfs_palloc_commit_free_entry, nilfs_palloc_abort_alloc_entry, and
nilfs_palloc_freev functions unconditionally add a counter after doing
clear bit operation on a bitmap block.

If the clear bit operation overlapped, the counter will not add up.
This fixes the issue by making the counter operations conditional.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

This fixes the issue that inodes count will not add up after removal
of raw inodes fails.  Hence, this prevents possible under flow of the
inodes count.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>