- 29 5月, 2008 7 次提交
-
-
由 Matt Carlson 提交于
This patch adds some options obtained through shared memory. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch added the 5785 device ID and ASIC revision to the code. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch introduces the libphy support. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch introduces code to register and unregister the tg3 mdio bus with the system. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch introduces the TG3_FLG3_USE_PHYLIB flag and applies it to some select places. This work makes later patches a little easier to read. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch applies cleanups that would otherwise clutter later patches. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch moves some functions towards the top of the file to avoid unnecessary function prototypes. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NBenjamin Li <benli@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2008 5 次提交
-
-
由 Matt Carlson 提交于
This patch updates the version number to 3.92. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
All variants of the 5714, 5715, and 5780 offer a feature called the "Universal Management Port". This feature is implemented in firmware and is largely transparent to the driver, except... It turns out that the UMP firmware needs to know the current status of the link. Because the firmware cannot touch the PHY registers while the driver is in control of the device, it needs the driver to report link status changes through an additional handshaking mechanism. Without this handshake, it has been observed in the field that the UMP firmware will not operate correctly. This patch implements the new handshake with the UMP firmware. Since the handshake uses the same mechanism ASF heartbeats use, code was added to detect and wait for completion of a pending previous event. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
A CPMU related loopback test bug existed for AX revisions of the 5761. While that errata has been fixed, the CPMU still slows down the core clock too far to run the loopback test successfully. This patch disables the CPMU LINK_SPEED mode just like we do with the AX revisions of the 5761 and all revisions of the 5784. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The 5761 NVRAM sizes assigned to the nvram_size member are half as big as they should be. This patch corrects the NVRAM sizes and replaces the hardcoded constants with preprocessor constants for readability. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The MI clock is not configured correctly on adapters with the CPMU present. The tg3 driver has code which statically sets the MI clock to be a fraction of the speed at which the core clock is running. However, the CPMU can change the adapter's core clock frequency based on operating conditions. Consequently, the MI will run slow when the core's clock has been slowed down. There is a new 500KHz constant frequency clock available on adapters with a CPMU. This patch removes the static core clock scaling and configures the MI clock to use this new 500KHz clock instead. Running the MI clock at slower speeds will not directly result in data corruption, but it does challenge the PHY read and write routine timeouts. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 4月, 2008 1 次提交
-
-
由 Hirofumi Nakagawa 提交于
Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless code. Signed-off-by: NHirofumi Nakagawa <hnakagawa@miraclelinux.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJeff Garzik <jeff@garzik.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2008 1 次提交
-
-
由 Eric Dumazet 提交于
Fix the following sparse warning : drivers/net/tg3.c:4025:3: warning: context imbalance in 'tg3_restart_hw' - unexpected unlock Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 4月, 2008 1 次提交
-
-
由 Matt Carlson 提交于
Herbert Xu's commit fb93134d, entitled "[TCP]: Fix size calculation in sk_stream_alloc_pskb", has triggered a bug in the 5701 where the 5701 DMA engine will corrupt outgoing packets. This problem only happens when the starting address of the packet matches a certain range of offsets and only when the 5701 is placed downstream of a particular Intel bridge. This patch detects the problematic bridge and if present, readjusts the starting address of the packet data to a dword aligned boundary. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2008 1 次提交
-
-
由 Sergei Shtylyov 提交于
The driver stores the PCI resource addresses into 'unsigned long' variable before calling ioremap_nocache() on them. This warrants kernel oops when the registers are accessed on PPC 44x platforms which (being 32-bit) have PCI memory space mapped beyond 4 GB. The arch/ppc/ kernel has a fixup in ioremap() that creates an illusion that the PCI memory resource is mapped below 4 GB, but arch/powerpc/ code got rid of this trick, having instead CONFIG_RESOURCES_64BIT enabled. [ Bump driver version and release date -DaveM ] Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2008 1 次提交
-
-
由 Matt Carlson 提交于
The 5784 B step and newer chips require the PHY DSPs to be fine-tuned based on one-time programmable values stored in the chip. This is essential to achieve optimal PHY operations especially when using long cables. We also need to properly handle the 10Mbit RX bit in the CPMU_CTRL register during PHY reset. Update version to 3.89. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 3月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Sparc MAC address support should be protected consistently with CONFIG_SPARC, but there was a stray CONFIG_SPARC64 case. Bump driver version and release date. Reported by Andrew Morton. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
When asked to blink LEDs the tg3 driver behaves when using: ethtool -p ethX The default value for data is zero, and other drivers interpret this as blink forever (or at least a really long time). The tg3 driver interprets this as blink once. All drivers should have the same behaviour. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 10 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch updates the version number to 3.87. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch does three things. It modifies tg3_setup_flow_control() to use the administrator requested flow control settings if autonegotiation is turned off. It slightly modifies the tg3_setup_fiber_mii_phy() function to account for this new use case. And finally, it does the same for tg3_setup_copper_phy(). The copper modifications are more than a small multi-line change. The new code makes an attempt to avoid a link renegotiation if the link is active at half duplex and the only difference between the current advertised settings and requested advertised settings is the flow control advertisements. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch modifies the software autoneg code to use the administrator specified flow control parameters. Since the autonegotiation code uses alternative flow control enumerations, the 1000-BaseX utility functions are used and code was added to convert the definitions to and from the alternate enumerations. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch modifies the 5704S hardware autoneg code to use the administrator specified flow control parameters. Since the 5704S uses device specific flow control enumerations, the 1000-BaseX utility functions are used and code was added to convert the definitions to and from the proprietary enumerations. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch replaces magic values with preprocessor definitions for the sg_dig_ctrl and sg_dig_status registers. This is preparatory work for the next patch. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds two functions designed to convert abstract TX & RX flow control parameters to 1000-BaseT and 1000-BaseX autonegotiation advertisements. Code that uses standard definitions which statically advertises TX & RX flow control has been replaced with code that configures the advertisements based on administrator dictated preferences. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds two new utility functions to resolve flow control. One function resolves flow control based on 1000-BaseT register definitions. The other resolves flow control based on 1000-Base X register definitions. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch removes the TX and RX flow control flags from tg3_flags and adds two new flow control variables, flowctrl and active_flowctrl. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 12月, 2007 2 次提交
-
-
由 Al Viro 提交于
tg3_nvram_write_block_unbuffered() is reading data from nvram into allocated buffer before overwriting a part of it with user-supplied data. Then it feeds the entire page back to nvram. It should be storing the words it had read as little-endian, not as host-endian. Note that tg3_set_eeprom() does exactly that for padding the same data to full words before it gets passed down to tg3_nvram_write_block() and then to tg3_nvram_write_block_unbuffered(). Moreover, when we get to sending the entire thing back to nvram, we go through it word-by-word, doing essentially writel(swab32(le32_to_cpu(word)), ...) so if we want them to reach the card in host-independent endianness, we'd better really have all that buffer filled with fixed-endian. For user-supplied part we obviously do have that (it's an array of octets memcpy'd in), ditto for padding of user-supplied part to word boundaries (taken care of in tg3_set_eeprom()). The rest of the buffer gets filled by tg3_nvram_write_block_unbuffered() and it would damn better be consistent with that (and with tg3_get_eeprom(), while we are at it - there we also convert the words read from nvram to little-endian before returning the buffer to user). The bug should get triggered on big-endian boxen when set_eeprom is done for less than entire page. Then the words that should've been unaffected at all will actually get byteswapped in place in nvram. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Fixed misannotations, introduced a new helper - tg3_nvram_read_le(). It gets __le32 * instead of u32 * and puts there the value converted to little-endian. A lot of callers of tg3_nvram_read() were doing that; converted them to tg3_nvram_read_le(). At that point the driver is practically endian-clean; the only remaining place is an actual bug, AFAICS; will be dealt with in the next patch. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2007 9 次提交
-
-
由 Matt Carlson 提交于
This patch updates the version number to 3.86 Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch changes the PHY type reported through ethtool for copper devices from MII to TP. The latter is more accurate. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds the A1 revision of 5784, 5764, and 5761, and applies all previous bugfixes. In places where the list of devices gets too long, the patch uses a new TG3_FLG3_5761_5784_AX_FIXES flag instead. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Previous devices hardcoded the PCI Maximum Read Request Size to 4K. To better comply with the PCI spec, the hardware now defaults the MRRS to 512 bytes. This will yield poor driver performance if left untouched. This patch increases the MRRS to 4K on driver initialization. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Internal hardware timers become inaccurate after link events. Clock frequency switches performed by the CPMU fail to adjust timer prescalers. The fix is to detect core clock frequency changes during link events and adjust the timer prescalers accordingly. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Most 5784 / 5764 LED modes do not work as expected because of a hardware bug. This patch forces the LED mode to be in MAC LED mode. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
New CPMU devices contend with the GPHY for power management. The GPHY autopowerdown feature is enabled by default in the PHY and thus needs to be disabled after every PHY reset. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch adds the LINK_SPEED mode to the list of CPMU modes that can cause the loopback tests to fail. These bugs are planned to be fixed in future revisions of the chip, so the patch qualifies the fixes as such. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
Newer devices contain bootcode in the chip's private ROM area. This bootcode is called selfboot. Selfboot can be patched in the device's NVRAM and the patches can have several formats. In one particular format, the checksum calculation needs to be slightly modified. This patch adjusts the NVRAM test code for that case, and add support for the missing formats. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-