Submitting a batchbuffer which simulates a gpu
hang by doing MI_BATCH_BUFFER_START into itself,
to test hangcheck, started to hard hang the whole box
(IVB). Bisecting lead to this commit:

commit 664b422c2966cd39b8f67e8d53a566ea8c877cd6
Author: Vinit Azad <vinit.azad@intel.com>
Date:   Wed Aug 14 13:34:33 2013 -0700

    drm/i915: Only unmask required PM interrupts

Experimenting with the mask register showed that
unmasking EI UP will prevent the hard hang in IVB and SNB.
HSW doesn't hang with EI UP masked.

Considering we are just disabling interrupts that aren't even
delivered to driver, this change is more likely to paper over some
weirdness in gpu's internal state machine. But until better
explanation can be found, let's trade little bit of power
for stability on these architectures.

v2: - Unmask EI_EXPIRED directly in I915_WRITE (Vinit)
v3: - Only unmask on SNB and IVB

Cc: Vinit Azad <vinit.azad@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Acked-by: NVinit Azad <vinit.azad@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Enable support for drm render nodes for radeon by flagging the ioctls that
are safe and just needed for rendering.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Enable support for drm render nodes for nouveau by flagging the ioctls that
are safe and just needed for rendering.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Enable support for drm render nodes for i915 by flagging the ioctls that
are safe and just needed for rendering.

v2: mark reg_read, set_caching and get_caching (ickle, danvet)
Signed-off-by: NKristian Høgsberg <krh@bitplanet.net>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DRM_IOCTL_MODE_GETFB is used to retrieve information about a given
framebuffer ID. It is a read-only helper and was thus declassified for
unprivileged access in:

  commit a14b1b42
  Author: Mandeep Singh Baines <mandeep.baines@gmail.com>
  Date:   Fri Jan 20 12:11:16 2012 -0800

      drm: remove master fd restriction on mode setting getters

However, alongside width, height and stride information,
DRM_IOCTL_MODE_GETFB also passes back a handle to the underlying buffer of
the framebuffer. This handle allows users to mmap() it and read or write
into it. Obviously, this should be restricted to DRM-Master.

With the current setup, *any* process with access to /dev/dri/card0 (which
means any process with access to hardware-accelerated rendering) can
access the current screen framebuffer and modify it ad libitum.

For backwards-compatibility reasons we want to keep the
DRM_IOCTL_MODE_GETFB call unprivileged. Besides, it provides quite useful
information regarding screen setup. So we simply test whether the caller
is the current DRM-Master and if not, we return 0 as handle, which is
always invalid. A following DRM_IOCTL_GEM_CLOSE on this handle will fail
with EINVAL, but we accept this. Users shouldn't test for errors during
GEM_CLOSE, anyway. And it is still better as a failing MODE_GETFB call.

v2: add capable(CAP_SYS_ADMIN) check for compatibility with i-g-t

Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Drop the msm_connector base class, and special calls to base class
methods from the encoder, and use instead drm_bridge.  This allows for a
cleaner division between the hdmi (and in future dsi) blocks, from the
mdp block.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Noticed by kbuild test robot.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This was one level away from where I'd grepped.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Alex writes:
This is the radeon drm-next request.  Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes

[airlied: fix up a bunch of conflicts from drm_order removal]

* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
  drm/radeon/dpm: make sure dc performance level limits are valid (CI)
  drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
  drm/radeon: gcc fixes for extended dpm tables
  drm/radeon: gcc fixes for kb/kv dpm
  drm/radeon: gcc fixes for ci dpm
  drm/radeon: gcc fixes for si dpm
  drm/radeon: gcc fixes for ni dpm
  drm/radeon: gcc fixes for trinity dpm
  drm/radeon: gcc fixes for sumo dpm
  drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
  drm/radeon: gcc fixes for rv6xx dpm
  drm/radeon: gcc fixes for radeon_atombios.c
  drm/radeon: enable UVD interrupts on CIK
  drm/radeon: fix init ordering for r600+
  drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
  drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
  drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
  radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
  drm/radeon/audio: set up the sads on DCE3.2 asics
  drm/radeon: fix handling of variable sized arrays for router objects
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem_dmabuf.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/radeon/cik.c
	drivers/gpu/drm/radeon/ni.c
	drivers/gpu/drm/radeon/r600.c

Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table.  In that case just
use the ac limits.  This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table.  In that case just
use the ac limits.  This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708

v2: fix up limits in dpm_init()
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The same as on evergreen.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reported-by: NFrankR Huang <FrankR.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The vram scratch buffer needs to be initialized
before the mc is programmed otherwise we program
0 as the GPU address of the default GPU fault
page.  In most cases we put vram at zero anyway and
reserve a page for the legacy vga buffer so in practice
this shouldn't cause any problems, but better to make
it correct.

Was changed in:
6fab3febReported-by: NFrankR Huang <FrankR.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Avoid needless uvd reprogramming if uvd powergating is disabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

No need to try the ring tests if starting the UVD block failed.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

For powergating, we just need to re-init the registers, there
is no need to restore the uvd BOs.  This just adds needless
work when powergating uvd for playback while the system is
on.  We only need to restore the uvd BOs on an actual resume
from suspend or when the driver loads.

This fixes multi-stream UVD playback on KB systems.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Commit a01c34f7 (radeon kms: do not
flush uninitialized hotplug work) moved work initialisation phase to
the last step of radeon_irq_kms_init(). Meelis Roos reported that this
causes problems on his machine because drm_irq_install() uses hotplug
work on r100.

hotplug work flushed in radeon_irq_kms_fini(), with two possible cases:
-- radeon_irq_kms_fini() call after successful radeon_irq_kms_init()
-- radeon_irq_kms_fini() call after unsuccessful (or not called at all)
   radeon_irq_kms_init()

The latter one causes flush work on uninitialised hotplug work. Move
work initialisation before drm_irq_install(), but keep existing agreement
to flush hotplug work in radeon_irq_kms_fini() only for `irq.installed'
(successful radeon_irq_kms_init()) case.

WARNING: CPU: 0 PID: 243 at kernel/workqueue.c:1378 __queue_work+0x132/0x16d()
Call Trace:
[<c12319b3>] ? dump_stack+0xa/0x13
[<c1022600>] ? warn_slowpath_common+0x75/0x8a
[<c1031010>] ? __queue_work+0x132/0x16d
[<c1031010>] ? __queue_work+0x132/0x16d
[<c102269e>] ? warn_slowpath_null+0x1b/0x1f
[<c1031010>] ? __queue_work+0x132/0x16d
[<c103107b>] ? queue_work_on+0x30/0x40
[<f8aed3f3>] ? r100_irq_process+0x16d/0x1e6 [radeon]
[<f8ae77cf>] ? radeon_driver_irq_preinstall_kms+0xc2/0xc5 [radeon]
[<f8974d77>] ? drm_irq_install+0xb2/0x1ac [drm]
[<f897604d>] ? drm_vblank_init+0x196/0x1d2 [drm]
[<f8ae78d3>] ? radeon_irq_kms_init+0x33/0xc6 [radeon]
[<f8aef35a>] ? r100_startup+0x1a3/0x1d6 [radeon]
[<f8ad77c8>] ? radeon_ttm_init+0x26e/0x287 [radeon]
[<f8aef752>] ? r100_init+0x2b3/0x309 [radeon]
[<c118082e>] ? vga_client_register+0x39/0x40
[<f8ac535f>] ? radeon_device_init+0x54b/0x61b [radeon]
[<f8ac40fd>] ? cail_mc_write+0x13/0x13 [radeon]
[<f8ac6864>] ? radeon_driver_load_kms+0x82/0xda [radeon]
[<f8978bbd>] ? drm_get_pci_dev+0x136/0x22d [drm]
[<f8ac409b>] ? radeon_pci_probe+0x6c/0x86 [radeon]
[<c112acf6>] ? pci_device_probe+0x4c/0x83
[<c11846c7>] ? driver_probe_device+0x80/0x184
[<c112a848>] ? pci_match_id+0x18/0x36
[<c1184837>] ? __driver_attach+0x44/0x5f
[<c11833f4>] ? bus_for_each_dev+0x50/0x5a
[<c118433e>] ? driver_attach+0x14/0x16
[<c11847f3>] ? __device_attach+0x28/0x28
[<c1184045>] ? bus_add_driver+0xd6/0x1bf
[<c1184c22>] ? driver_register+0x78/0xcf
[<f8ba8000>] ? 0xf8ba7fff
[<c10003bf>] ? do_one_initcall+0x8b/0x121
[<c101e668>] ? change_page_attr_clear+0x2e/0x33
[<f8ba8000>] ? 0xf8ba7fff
[<c101e689>] ? set_memory_ro+0x1c/0x20
[<c104de94>] ? set_page_attributes+0x11/0x12
[<c104f6e1>] ? load_module+0x12fa/0x17e8
[<c107483b>] ? map_vm_area+0x22/0x31
[<c104fc36>] ? SyS_init_module+0x67/0x7d
[<c1234245>] ? sysenter_do_call+0x12/0x26
Reported-by: NMeelis Roos <mroos@linux.ee>
Tested-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This sets up the short audio descriptors properly on
DCE3.2 asics for hdmi audio.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The table has the following format:

typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset pointing to this structure
{
  UCHAR               ucNumberOfSrc;
  USHORT              usSrcObjectID[1];
  UCHAR               ucNumberOfDst;
  USHORT              usDstObjectID[1];
}ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT;

usSrcObjectID[] and usDstObjectID[] are variably sized, so we
can't access them directly.  Use pointers and update the offset
appropriately when accessing the Dst members.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Setting MC_MISC_CNTL.GART_INDEX_REG_EN causes hangs on
some boards on resume.  The systems seem to work fine
without touching this bit so leave it as is.

v2: read-modify-write the GART_INDEX_REG_EN bit.
I suspect the problem is that we are losing the other
settings in the register.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=52952Reported-by: NOndrej Zary <linux@rainbow-software.org>
Tested-by: NDaniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This adds the pci ids for the berlin GPU core.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This fills in the GPU specific details for berlin
GPU cores so that the driver will work with them.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

These blocks need to be ungated for the other parts of
the driver properly initialize them (e.g., after a gpu
reset, etc.).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Track the current uvd gated state on CI to avoid unnecessary
state changes when uvd is active.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

UVD dpm dynamically adjusts the uvd clocks on
demand.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since we aren't using it when the crtc is disabled, turn it off
to save power.  The GRPH block is the part of the display
controller that controls the primary graphics plane (size,
address, etc.).
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

These fixes make writes work properly.  Previously
only reads worked.  Note that this feature is off
by default.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the LCD table contains an EDID record, properly account
for the edid size when walking through the records.

This should fix error messages about unknown LCD records.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Check the overrides in the firmware info table before
enabling spread spectrum on the engine or memory clocks.

Some boards may have valid spread spectrum tables, but
shouldn't necessarily have it enabled.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>