- 05 9月, 2015 3 次提交
-
-
由 Andrea Arcangeli 提交于
I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
Defines the uAPI of the userfaultfd, notably the ioctl numbers and protocol. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrea Arcangeli 提交于
This is the latest userfaultfd patchset. The postcopy live migration feature on the qemu side is mostly ready to be merged and it entirely depends on the userfaultfd syscall to be merged as well. So it'd be great if this patchset could be reviewed for merging in -mm. Userfaults allow to implement on demand paging from userland and more generally they allow userland to more efficiently take control of the behavior of page faults than what was available before (PROT_NONE + SIGSEGV trap). The use cases are: 1) KVM postcopy live migration (one form of cloud memory externalization). KVM postcopy live migration is the primary driver of this work: http://blog.zhaw.ch/icclab/setting-up-post-copy-live-migration-in-openstack/ http://lists.gnu.org/archive/html/qemu-devel/2015-02/msg04873.html 2) postcopy live migration of binaries inside linux containers: http://thread.gmane.org/gmane.linux.kernel.mm/132662 3) KVM postcopy live snapshotting (allowing to limit/throttle the memory usage, unlike fork would, plus the avoidance of fork overhead in the first place). While the wrprotect tracking is not implemented yet, the syscall API is already contemplating the wrprotect fault tracking and it's generic enough to allow its later implementation in a backwards compatible fashion. 4) KVM userfaults on shared memory. The UFFDIO_COPY lowlevel method should be extended to work also on tmpfs and then the uffdio_register.ioctls will notify userland that UFFDIO_COPY is available even when the registered virtual memory range is tmpfs backed. 5) alternate mechanism to notify web browsers or apps on embedded devices that volatile pages have been reclaimed. This basically avoids the need to run a syscall before the app can access with the CPU the virtual regions marked volatile. This depends on point 4) to be fulfilled first, as volatile pages happily apply to tmpfs. Even though there wasn't a real use case requesting it yet, it also allows to implement distributed shared memory in a way that readonly shared mappings can exist simultaneously in different hosts and they can be become exclusive at the first wrprotect fault. This patch (of 22): Add documentation. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 9月, 2015 3 次提交
-
-
由 Ezequiel Garcia 提交于
Add a device-tree binding document for the clocksource driver provided by Pistachio SoC general purpose timers. Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: NAndrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: devicetree@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hartley <James.Hartley@imgtec.com> Cc: Govindraj Raja <Govindraj.Raja@imgtec.com> Cc: Damien Horsley <Damien.Horsley@imgtec.com> Cc: James Hogan <James.Hogan@imgtec.com> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Patchwork: https://patchwork.linux-mips.org/patch/10783/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Commit d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") added the 'x' sysrq key for dumping MIPS TLB entries, but didn't document it in Documentation/sysrq.txt. Add mention of the MIPS use of the 'x' SysRq key. Reported-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: NJonathan Corbet <corbet@lwn.net> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-doc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10720/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 9月, 2015 7 次提交
-
-
由 Viresh Kumar 提交于
What's being done from CPUFREQ_INCOMPATIBLE, can also be done with CPUFREQ_ADJUST. There is nothing special with CPUFREQ_INCOMPATIBLE notifier. Kill CPUFREQ_INCOMPATIBLE and fix its usage sites. This also updates the numbering of notifier events to remove holes. Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Pi-Cheng Chen 提交于
This patch adds the clock and regulator consumer properties part of document for CPU DVFS clocks on Mediatek MT8173 SoC. Signed-off-by: NPi-Cheng Chen <pi-cheng.chen@linaro.org> Acked-by: NMichael Turquette <mturquette@baylibre.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Robert Jarzmik 提交于
The PXA architecture provides a DMA to pump data from the nand controller to memory and the other way around. Add it to the binding description. Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Mugunthan V N 提交于
CPSW driver has multiple compatibles for errata implementations but not documented, add necessary documentation. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Andrew Lunn 提交于
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip Downey 提交于
Document the addition of a new sysctl variable which controls the generation of IGMP reports for link local multicast groups in the 224.0.0.X range. IGMP reports for local multicast groups can now be optionally inhibited by setting the value to zero e.g.: echo 0 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports To retain backwards compatibility the previous behaviour is retained by default on system boot or reverted by setting the value back to non-zero. Signed-off-by: NPhilip Downey <pdowney@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heinz Mauelshagen 提交于
For RAID 4/5/6 data integrity reasons 'discard_zeroes_data' must work properly. Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
- 29 8月, 2015 2 次提交
-
-
由 Aaron Skomra 提交于
This device is pad (buttons) only, there is no stylus or touch. Up to five remotes can pair with the device's associated USB dongle. Signed-off-by: NAaron Skomra <aaron.skomra@wacom.com> Reviewed-by: NJason Gerecke <jason.gerecke@wacom.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Kamlakant Patel 提交于
Add DT bindings documentation for SPI controller driver used by Netlogic XLP MIPS64 SoCs. Signed-off-by: NKamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 28 8月, 2015 4 次提交
-
-
由 Prarit Bhargava 提交于
dis_ucode_ldr was introduced in 65cef131 ("x86, microcode: Add a disable chicken bit") and will disable microcode loading on x86. This kernel parameter is buried in the code and should be added to the Documentation. Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Vincent Donnefort 提交于
On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO values to LED mode) is different from the one used on other boards supported by the leds-ns2 driver. With this patch the hardcoded mapping is removed from leds-ns2. Now, it must be defined either in the platform data (if an old-fashion board setup file is used) or in the DT node. In order to allow the later, this patch also introduces a modes-map property for the leds-ns2 DT binding. Signed-off-by: NVincent Donnefort <vdonnefort@gmail.com> Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
-
由 Jacek Anaszewski 提交于
1. Since max-microamp property has had no users so far, then rename it to more descriptive led-max-microamp. 2. Since flash-timeout-us property has had no users so far, then rename it to more accurate flash-max-timeout-us. 3. Describe led-max-microamp property as mandatory for specific board configurations. 4. Make flash-max-microamp and flash-max-timeout-us properties mandatory for devices with configurable flash current and flash timeout settings respectively. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: devicetree@vger.kernel.org Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
-
由 Luis R. Rodriguez 提交于
The effort to replace mtrr_add() with architecture agnostic arch_phys_wc_add() is complete, this will ensure write-combining implementations (PAT on x86) is taken advantage instead of using MTRR. With the effort done now, hide direct MTRR access for drivers. The legacy user-space /proc/mtrr ABI is not affected. Update x86 documentation on MTRR to reflect the completion of the phasing out of direct access to MTRR, also add a note on platform firmware code use of MTRRs based on the obituary discussion of MTRRs on Linux [0]. [0] http://lkml.kernel.org/r/1438991330.3109.196.camel@hp.comSigned-off-by: NLuis R. Rodriguez <mcgrof@suse.com> Cc: <syrjala@sci.fi> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Borislav Petkov <bp@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suresh Siddha <sbsiddha@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Ville Syrjälä <syrjala@sci.fi> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: airlied@linux.ie Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: dan.j.williams@intel.com Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: mst@redhat.com Cc: netdev@vger.kernel.org Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1440443613-13696-12-git-send-email-mcgrof@do-not-panic.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 27 8月, 2015 4 次提交
-
-
由 Huang Rui 提交于
This patch updates description of fam15h_power driver, its scope is extended to family 16h processsors. Signed-off-by: NHuang Rui <ray.huang@amd.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Vineet Gupta 提交于
With all features in place, the ARC HS pct block can now be effectively allowed to be probed/used Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Matthew R. Ochs 提交于
Add support for physical LUN segmentation (virtual LUNs) to device driver supporting the IBM CXL Flash adapter. This patch allows user space applications to virtually segment a physical LUN into N virtual LUNs, taking advantage of the translation features provided by this adapter. Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: NMichael Neuling <mikey@neuling.org> Reviewed-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Matthew R. Ochs 提交于
Add superpipe supporting infrastructure to device driver for the IBM CXL Flash adapter. This patch allows userspace applications to take advantage of the accelerated I/O features that this adapter provides and bypass the traditional filesystem stack. Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: NMichael Neuling <mikey@neuling.org> Reviewed-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Reviewed-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 26 8月, 2015 5 次提交
-
-
由 Florian Fainelli 提交于
Add a document describing the Broadcom Starfigther 2 switch hardware, its specifics, and how the driver is implemented and its specifics. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Describe how the DSA subsystem works, its design principles, limitations, and describe in details how to implement a DSA switch driver. Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When TCP pacing was added back in linux-3.12, we chose to apply a fixed ratio of 200 % against current rate, to allow probing for optimal throughput even during slow start phase, where cwnd can be doubled every other gRTT. At Google, we found it was better applying a different ratio while in Congestion Avoidance phase. This ratio was set to 120 %. We've used the normal tcp_in_slow_start() helper for a while, then tuned the condition to select the conservative ratio as soon as cwnd >= ssthresh/2 : - After cwnd reduction, it is safer to ramp up more slowly, as we approach optimal cwnd. - Initial ramp up (ssthresh == INFINITY) still allows doubling cwnd every other RTT. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Rutland 提交于
Currently msi-parent is used in a couple of drivers despite being fairly underspecified. This patch adds a generic binding for MSIs (including the existing msi-parent property) enabling the description of platform devices capable of using MSIs. While MSIs are primarily distinguished by doorbell and payload, some MSI controllers (e.g. the GICv3 ITS) also use side-band information accompanying the write to identify the master which originated the MSI, to allow for sandboxing. This sideband information is non-probeable and needs to be described in the DT. Other MSI controllers may have additional configuration details which need to be described per-master. This patch adds a generic msi-parent binding document, extending the de-facto standard with a new (optional) #msi-cells which can be used to express any per-master configuration and/or sideband data. This is sufficient to describe non-hotpluggable devices. For busses where sideband data may be derived from some bus-specific master ID scheme, other properties will be required to describe the mapping. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Geert Uytterhoeven 提交于
Add the "jedec" vendor prefix for the "JEDEC Solid State Technology Association" (formerly known as the "Joint Electron Device Engineering Council"), which is already in use in several bindings. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NBrian Norris <computersforpeace@gmail.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 25 8月, 2015 8 次提交
-
-
由 Linus Walleij 提交于
These Ux500 clocks have been around for years and were never properly documented. Add the proper binding documentation. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NMichael Turquette <mturquette@baylibre.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Leo Yan 提交于
Document the new compatible for stub clock driver which is used for CPU and DDR's dynamic frequency scaling. Signed-off-by: NLeo Yan <leo.yan@linaro.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Leo Yan 提交于
Document "hisilicon,hi6220-sramctrl" for SRAM controller. Signed-off-by: NLeo Yan <leo.yan@linaro.org> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Stephen Boyd 提交于
We're removing struct clk from the clk provider API. This code is calling the consumer APIs to change the parent to a 1 MHz fixed rate clock for each of the clocks that the driver provides. Move to using the assigned-clock-parents DT property for this instead. Because this is an ABI break, detect if the property is missing and fall back to setting the parent explicitly before the clocks are registered. Acked-by: NPawel Moll <pawel.moll@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Tested-by: NSudeep Holla <sudeep.holla@arm.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Pawel Moll 提交于
Signed-off-by: NPawel Moll <pawel.moll@arm.com> Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
-
由 Alexander Kuleshov 提交于
The IRQSTACKSIZE was renamed to the IRQ_STACK_SIZE in the (26f80bd6 x86-64: Convert irqstacks to per-cpu) commit, but it still named IRQSTACKSIZE in the documentation. This patch fixes this. Signed-off-by: NAlexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
由 Nan Xiao 提交于
Hi all, According to "Intel Virtualization Technology for Directed I/O" specification, DRHD stands for "DMA Remapping Hardware Unit Definition" , not "DMA Engine Reporting Structure". Signed-off-by: NNan Xiao <nan@chinadtrace.org>
-
由 Mario Carrillo 提交于
The HOWTO document needed updating for the new kernel versioning. Signed-off-by: NMario Carrillo <mario.alfredo.c.arevalo@intel.com> Signed-off-by: NJonathan Corbet <corbet@lwn.net>
-
- 24 8月, 2015 2 次提交
-
-
由 Thierry Reding 提交于
Use "sharp" as the vendor prefix for Sharp Corporation in device tree compatible strings. Signed-off-by: NThierry Reding <treding@nvidia.com> [robh: fix name to Sharp Corporation] Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Ben Hutchings 提交于
The pfc in the R8A7790 (and probably others in the R-Car gen 2 family) supports switching SDHI signals between 3.3V and 1.8V nominal voltage, and the SD driver should do that when switching to and from UHS modes. Add a flag for pins that have configurable I/O voltage and SoC operations to get and set the nominal voltage. Implement the pinconf power-source parameter using these operations. Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 22 8月, 2015 1 次提交
-
-
This change documents a new property for the snps,dw-apb-ssi device, allowing an implementer to specify either four byte or two bytes access to the SPI controller data register. This supports a change that unbreaks this driver on picoXcell platforms. Signed-off-by: NMichael van der Westhuizen <michael@smart-africa.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 8月, 2015 1 次提交
-
-
由 Eric Anholt 提交于
This is a new per-cpu root interrupt controller on the Raspberry Pi 2, which will chain to the bcm2835 interrupt controller for peripheral interrupts. Signed-off-by: NEric Anholt <eric@anholt.net> Acked-by: NStephen Warren <swarren@wwwdotorg.org> Cc: linux-rpi-kernel@lists.infradead.org Cc: Lee Jones <lee@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1438902033-31477-4-git-send-email-eric@anholt.netSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-