I don't know of any case where they have been useful and they look ugly.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

# HG changeset patch
# User Jeremy Fitzhardinge <jeremy@xensource.com>
# Date 1199391030 28800
# Node ID 5d35c92fdf0e2c52edbb6fc4ccd06c7f65f25009
# Parent  22f6a5902285b58bfc1fbbd9e183498c9017bd78
x86/efi: fix improper use of lvalue

pgd_val is no longer valid as an lvalue, so don't try to assign to it.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Commits
 - c52f61fcbdb2aa84f0e4d831ef07f375e6b99b2c
  (x86: allow TSC clock source on AMD Fam10h and some cleanup)
 - e30436f05d456efaff77611e4494f607b14c2782
  (x86: move X86_FEATURE_CONSTANT_TSC into early cpu feature detection)

are supposed to fix the detection of contant TSC for AMD CPUs.
Unfortunately on x86_64 it does still not work with current x86/mm.
For a Phenom I still get:

  ...
  TSC calibrated against PM_TIMER
  Marking TSC unstable due to TSCs unsynchronized
  time.c: Detected 2288.366 MHz processor.
  ...

We have to set c->x86_power in early_identify_cpu to properly detect
the CONSTANT_TSC bit in early_init_amd.

Attached patch fixes this issue. Following the relevant boot
messages when the fix is used:

  ...
  TSC calibrated against PM_TIMER
  time.c: Detected 2288.279 MHz processor.
  ...
  Initializing CPU#1
  ...
  checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  ...
  Initializing CPU#2
  ...
  checking TSC synchronization [CPU#0 -> CPU#2]: passed.
  ...
  Booting processor 3/4 APIC 0x3
  ...
  checking TSC synchronization [CPU#0 -> CPU#3]: passed.
  Brought up 4 CPUs
  ...

Patch is against x86/mm (v2.6.24-rc8-672-ga9f7faa).
Please apply.

Set c->x86_power in early_identify_cpu. This ensures that
X86_FEATURE_CONSTANT_TSC can properly be set in early_init_amd.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Trust the ACPI code to disable TSC instead when C3 is used.

AMD Fam10h does not disable TSC in any C states so the
check was incorrect there anyways after the change
to handle this like Intel on AMD too.

This allows to use the TSC when C3 is disabled in software
(acpi.max_c_state=2), but the BIOS supports it anyways.

Match i386 behaviour.

Cc: lenb@kernel.org
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

After a lot of discussions with AMD it turns out that TSC
on Fam10h CPUs is synchronized when the CONSTANT_TSC cpuid bit is set.
Or rather that if there are ever systems where that is not
true it would be their BIOS' task to disable the bit.

So finally use TSC gettimeofday on Fam10h by default.

Or rather it is always used now on CPUs where the AMD
specific CONSTANT_TSC bit is set.

This gives a nice speed bost for gettimeofday() on these systems
which tends to be by far the most common v/syscall.

On a Fam10h system here TSC gtod uses about 20% of the CPU time of
acpi_pm based gtod(). This was measured on 32bit, on 64bit
it is even better because TSC gtod() can use a vsyscall
and stay in ring 3, which acpi_pm doesn't.

The Intel check simply checks for CONSTANT_TSC too without hardcoding
Intel vendor. This is equivalent on 64bit because all 64bit capable Intel
CPUs will have CONSTANT_TSC set.

On Intel there is no CPU supplied CONSTANT_TSC bit currently,
but we synthesize one based on hardcoded knowledge which steppings
have p-state invariant TSC.

So the new logic is now: On CPUs which have the AMD specific
CONSTANT_TSC bit set or on Intel CPUs which are new enough
to be known to have p-state invariant TSC always use
TSC based gettimeofday()

Cc: lenb@kernel.org
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Need this in the next patch in time_init and that happens early.

This includes a minor fix on i386 where early_intel_workarounds()
[which is now called early_init_intel] really executes early as
the comments say.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

[ andi@firstfloor.org: build fix ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

rdtsc is now speculation-safe, so no need for the sync variants of
the APIs.

[ mingo@elte.hu: removed the nsec_barrier() complication. ]
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

make native_read_tsc() always non-speculative.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

map vsyscalls early enough. This is important if a __vsyscall_fn
function is used by other kernel code too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

move native_read_tsc() offline.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

LFENCE is available on XMM2 or higher Intel CPUs - not XMM or higher...

this caused boot failures on XMM1 & !XMM1 capable CPUs.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

According to Intel RDTSC can be always synchronized with LFENCE
on all current CPUs. Implement the necessary CPUID bit for that.

It is unclear yet if that is true for all future CPUs too,
but if there's another way the kernel can be always updated.

Cc: asit.k.mallick@intel.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

According to AMD RDTSC can be synchronized through MFENCE.
Implement the necessary CPUID bit for that.

Cc: andreas.herrmann3@amd.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

More white space and coding style clean up.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

White space and coding style clean up.
Make apic_32/64.c similar.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

When developing the Kprobes arch code for ARM, I ran across some code
found in x86 and s390 Kprobes arch code which I didn't consider as
good as it could be.

Once I figured out what the code was doing, I changed the code
for ARM Kprobes to work the way I felt was more appropriate.
I've tested the code this way in ARM for about a year and would
like to push the same change to the other affected architectures.

The code in question is in kprobe_exceptions_notify() which
does:
====
          /* kprobe_running() needs smp_processor_id() */
          preempt_disable();
          if (kprobe_running() &&
              kprobe_fault_handler(args->regs, args->trapnr))
                  ret = NOTIFY_STOP;
          preempt_enable();
====

For the moment, ignore the code having the preempt_disable()/
preempt_enable() pair in it.

The problem is that kprobe_running() needs to call smp_processor_id()
which will assert if preemption is enabled.  That sanity check by
smp_processor_id() makes perfect sense since calling it with preemption
enabled would return an unreliable result.

But the function kprobe_exceptions_notify() can be called from a
context where preemption could be enabled.  If that happens, the
assertion in smp_processor_id() happens and we're dead.  So what
the original author did (speculation on my part!) is put in the
preempt_disable()/preempt_enable() pair to simply defeat the check.

Once I figured out what was going on, I considered this an
inappropriate approach.  If kprobe_exceptions_notify() is called
from a preemptible context, we can't be in a kprobe processing
context at that time anyways since kprobes requires preemption to
already be disabled, so just check for preemption enabled, and if
so, blow out before ever calling kprobe_running().  I wrote the ARM
kprobe code like this:
====
          /* To be potentially processing a kprobe fault and to
           * trust the result from kprobe_running(), we have
           * be non-preemptible. */
          if (!preemptible() && kprobe_running() &&
              kprobe_fault_handler(args->regs, args->trapnr))
                  ret = NOTIFY_STOP;
====

The above code has been working fine for ARM Kprobes for a year.
So I changed the x86 code (2.6.24-rc6) to be the same way and ran
the Systemtap tests on that kernel.  As on ARM, Systemtap on x86
comes up with the same test results either way, so it's a neutral
external functional change (as expected).

This issue has been discussed previously on linux-arm-kernel and the
Systemtap mailing lists.  Pointers to the by base for the two
discussions:
http://lists.arm.linux.org.uk/lurker/message/20071219.223225.1f5c2a5e.en.html
http://sourceware.org/ml/systemtap/2007-q1/msg00251.htmlSigned-off-by: NQuentin Barnes <qbarnes@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NAnanth N Mavinakayahanalli <ananth@in.ibm.com>
Acked-by: NAnanth N Mavinakayahanalli <ananth@in.ibm.com>

This patch eliminates most of code-style errors
discovered by checkpatch.pl on arch/x86/kernel/apm_32.c

no code changed:

      text    data     bss     dec     hex filename
     12142    1837      84   14063    36ef apm_32.o.before
     12142    1837      84   14063    36ef apm_32.o.after

   md5:
       2676b881ad55e387da4a995e8b9ee372  apm_32.o.before.asm
       2676b881ad55e387da4a995e8b9ee372  apm_32.o.after.asm
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch eliminates checkpatch.pl complaints on bootflag.c

No code changed:

   text    data     bss     dec     hex filename
    321       8       0     329     149 bootflag.o.before
    321       8       0     329     149 bootflag.o.after

   md5:
      9c1b474bcf25ddc1724a29c19880043f  bootflag.o.before.asm
      9c1b474bcf25ddc1724a29c19880043f  bootflag.o.after.asm
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Combine the 32 and 64 bit specific Makefiles in one file.
While doing so link order was (almost) preserved on 32 bit
but on 64 bit link order changed a lot.

Patch was checked with defconfig + allyesconfig builds.
The same .o files were linked in these configurations.

To keep readability of the Makefiles a few Kconfig
symbols was added/modified and it was checked that
they were not used anywhere else.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Make the control flow of kprobe_handler more obvious.

Collapse the separate if blocks/gotos with if/else blocks
this unifies the duplication of the check for a breakpoint
instruction race with another cpu.

Create two jump targets:
	preempt_out: re-enables preemption before returning ret
	out: only returns ret
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The functions time_before, time_before_eq, time_after, and time_after_eq
are more robust for comparing jiffies against other values.

A simplified version of the semantic patch making this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@ change_compare_np @
expression E;
@@

(
- jiffies <= E
+ time_before_eq(jiffies,E)
|
- jiffies >= E
+ time_after_eq(jiffies,E)
|
- jiffies < E
+ time_before(jiffies,E)
|
- jiffies > E
+ time_after(jiffies,E)
)

@ include depends on change_compare_np @
@@

#include <linux/jiffies.h>

@ no_include depends on !include && change_compare_np @
@@

  #include <linux/...>
+ #include <linux/jiffies.h>
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Move #ifdef around function definiton into the function and
unconditionally return on X86_32.  Saves an ifdef from the
one callsite.

[ mingo@elte.hu: minor cleanup. ]
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Fold some small ifdefs into a helper function.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

#88: FILE: arch/x86/kernel/cpu/mcheck/k7.c:34:
+		rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
 		                             ^

ERROR: need space after that ',' (ctx:VxV)
#142: FILE: arch/x86/kernel/cpu/mcheck/p4.c:170:
+		rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
 		                             ^

ERROR: need space after that ',' (ctx:VxV)
#180: FILE: arch/x86/kernel/cpu/mcheck/p6.c:34:
+		rdmsr(MSR_IA32_MC0_STATUS+i*4,low, high);
 		                             ^

total: 3 errors, 0 warnings, 114 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Min Zhang <mzhang@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

#40: FILE: arch/x86/kernel/cpu/mcheck/k7.c:46:
+				snprintf (misc, 20, "[%08x%08x]", ahigh, alow);

WARNING: line over 80 characters
#45: FILE: arch/x86/kernel/cpu/mcheck/k7.c:50:
+				snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#45: FILE: arch/x86/kernel/cpu/mcheck/k7.c:50:
+				snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#48: FILE: arch/x86/kernel/cpu/mcheck/k7.c:52:
+			printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",

WARNING: no space between function name and open parenthesis '('
#65: FILE: arch/x86/kernel/cpu/mcheck/p4.c:161:
+		printk (KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"

WARNING: no space between function name and open parenthesis '('
#88: FILE: arch/x86/kernel/cpu/mcheck/p4.c:182:
+				snprintf (misc, 20, "[%08x%08x]", ahigh, alow);

WARNING: line over 80 characters
#93: FILE: arch/x86/kernel/cpu/mcheck/p4.c:186:
+				snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#93: FILE: arch/x86/kernel/cpu/mcheck/p4.c:186:
+				snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#96: FILE: arch/x86/kernel/cpu/mcheck/p4.c:188:
+			printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",

WARNING: no space between function name and open parenthesis '('
#120: FILE: arch/x86/kernel/cpu/mcheck/p6.c:46:
+				snprintf (misc, 20, "[%08x%08x]", ahigh, alow);

WARNING: line over 80 characters
#125: FILE: arch/x86/kernel/cpu/mcheck/p6.c:50:
+				snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#125: FILE: arch/x86/kernel/cpu/mcheck/p6.c:50:
+				snprintf (addr, 24, " at %08x%08x", ahigh, alow);

WARNING: no space between function name and open parenthesis '('
#128: FILE: arch/x86/kernel/cpu/mcheck/p6.c:52:
+			printk (KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",

total: 0 errors, 13 warnings, 100 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Min Zhang <mzhang@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

SMP, the machine check exception dispatches all logical processors within a
physical package to the machine-check exception handler, so the printk
within each handler outputs concurrently and makes the output unreadable.
Refer to Intel system programming guide Part 1 Section 7.8.5
http://developer.intel.com/design/processor/manuals/253668.pdfSigned-off-by: NMin Zhang <mzhang@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

support according to fixes of x86_64 support.

- Delete efi_rt_lock because it is used during system early boot,
  before SMP is initialized.

- Change local_flush_tlb() to __flush_tlb_all() to flush global page
  mapping.

- Clean up includes.

- Revise Kconfig description.

- Enable noefi kernel parameter on i386.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

x86_read_per_cpu() and its writeish sister are not present in x86_64. So in
this patch, we replace them with __get_cpu_var(), which is present in both
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Like i386, x86_64 also need to include its own patching function.
(Well, if you're not in a hurry, and don't care about speed, you don't
really _need_ ;-))

So here they are. Not much different in essence from i386
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The core patching code for paravirt is sufficiently different
among i386 and x86_64, and we move them to specific files.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The assembly code in entry_64.S issues a bunch of privileged instructions,
like cli, sti, swapgs, and others. Paravirt guests are forbidden to do so,
and we then replace them with macros that will do the right thing.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds paravirt hook for swapgs operation, which is a privileged
operation in x86_64.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds a field in pv_cpu_ops for a paravirtualized hook
for rdtscp, needed for x86_64.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch changes paravirt_32.c to paravirt.c. The goal
is to have paravirt support in x86_64, so we do it in a common file
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Pass the buffer size for (most) ptrace commands that pass user-allocated buffers and check that size before accessing the buffer. Unfortunately, PTRACE_BTS_GET already uses all 4 parameters.
Commands that access user buffers return the number of bytes or records read or written.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Support BTS recording of 32bit and 64bit tasks from 32bit or 64bit tasks.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Check the rlimit of the tracing task for total and locked memory when allocating the BTS buffer.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Move some deeply indented code related to re-entrance processing
from kprobe_handler() to reenter_kprobe().
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>