Some constant definitions are only defined for spear13xx, so
we must not attempt to build SPEAr SMP support when that
SoC is not enabled.

arch/arm/mach-spear/platsmp.c:25:35:
 error: 'VA_SCU_BASE' undeclared here (not in a function)
 arch/arm/mach-spear/platsmp.c: In function 'spear13xx_smp_prepare_cpus':
 arch/arm/mach-spear/platsmp.c:111:58: error: 'SYS_LOCATION' undeclared (first use in this function)

Cc: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

From Nicolas Ferre <nicolas.ferre@atmel.com>:

DT modifications for generic slave DMA binding.
Addition of MCI and I2C DMA bindings.
A little DT machine compatibility removal for SAMA5.

* tag 'at91-soc' of git://github.com/at91linux/linux-at91:
  ARM: at91/sama5d34ek.dts: remove not needed compatibility string
  ARM: at91: dts: add MCI DMA support
  ARM: at91: dts: add i2c dma support
  ARM: at91: dts: set #dma-cells to the correct value
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

I changed the prototype of the function earlier but only
in the section for CONFIG_DMA_ENGINE, not the alternative.
This makes the driver build again, e.g. for vexpress_defconfig.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This is a series originally prepared for inclusion in 3.9, which did
not work out because of dependencies on the dmaengine driver. All the
changes for the dmaengine code are merged in 3.9 now, so we can finally
do the switchover and remove the now unnecessary dma definitions for
spear13xx from the platform code.

The dma platform_data actually made up the majority of the spear13xx
platform code overall, so moving that into device tree files makes the
code substantially smaller.

* spear/dwdma:
  ata: arasan: remove the need for platform_data
  ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
  serial: pl011: use generic DMA slave configuration if possible
  spi: pl022: use generic DMA slave configuration if possible
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This is a prerequisite for the spear/dwdma series.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This adds a complete DT binding for the arasan device driver. There is
currently only one user, which is the spear13xx platform, so we don't
actually have to parse all the properties until another user comes in,
but this does use the generic DMA binding to find the DMA channel.

The patch is untested so far and is part of a series to convert
the spear platform over to use the generic DMA binding, so it
should stay with the rest of the series.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NViresh Kumar <viresh.linux@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: devicetree-discuss@lists.ozlabs.org

From Nicolas Ferre:
Little modification in SoC presentation in kernel log.
Removing of a long-standing warning in sam9263 PM code.

* tag 'at91-soc' of git://github.com/at91linux/linux-at91:
  ARM: at91: suspend both memory controllers on at91sam9263
  ARM: at91: change "Unknown" qualifier SoC subtype handling
Signed-off-by: NOlof Johansson <olof@lixom.net>

* at91/soc:
  ARM: at91: add defconfig for SAMA5
  ARM: at91: dt: add device tree files for SAMA5D3 family
  ARM: at91: introduce SAMA5 support
  ARM: at91: introduce the core type choice to split ARMv4/5 and ARMv7 arch
  ARM: at91: add AT91_SAM9_TIME entry to select at91sam926x_time.c compilation
  ARM: at91: change name template in AT91_SOC_START macro
  ARM: at91: renamme rm9200 dt file
  ARM: at91: rename board-dt to more specific name board-dt-sam9
  ARM: at91: move non DT Kconfig to Kconfig.non_dt

Merge tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into late/cleanup

From Tony Lindgren:
Display related clean-up from Tomi Valkeinen.

These were separated from the DSS driver changes to leave out
a dependency between the driver and arch/arm related code.

* tag 'omap-for-v3.10/dss-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm: dss-common: don't use reset_gpio from omap4_panda_dvi_device
  arm: omap boards: Remove unnecessary platform_enable/disable callbacks for VENC devices
  arm: omap: dss-common: use picodlp panel's gpio handling
  arm: omap: board-omap3pandora: use tpo panel's gpio handling
  arm: omap: board-zoom: use NEC panel's gpio handling
  arm: omap: board-rx-51: use acx565akm panel's gpio handling
  arm: omap: board-sdp3430: use sharp panel's gpio handling
  arm: omap: board-omap3evm: use sharp panel's gpio handling
  arm: omap: board-overo: use lb035q02 dpi panel's gpio handling
  arm: omap: board-ldp: use generic dpi panel's gpio handling
  arm: omap: board-am3517: use generic dpi panel's gpio handling
  arm: omap: board-cm-t35: use generic dpi panel's gpio handling
  arm: omap: board-devkit8000: use generic dpi panel's gpio handling
  arm: omap: board-2430: use generic dpi panel's gpio handling
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  OMAPDSS: add fields to panels' platform data
  OMAPDSS: panels: keep platform data of all panels in a single header

Conflicts:
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-zoom-display.c

* omap/boards:
  ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
  omap2+: Remove useless Makefile line
  omap2+: Remove useless Makefile line
  ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
  ARM: OMAP1: fix omap_udc registration

* omap/fixes-non-critical:
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
  ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
  ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
  ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
  ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry
  ARM: OMAP: fix typo "CONFIG_SMC91x_MODULE"
  ARM: OMAP5: clock: No Freqsel on OMAP5 devices too
  ARM: OMAP5: Make errata i688 workaround available
  ARM: OMAP5: Update SAR memory layout for WakeupGen
  ARM: OMAP5: Update SAR RAM base address
  ARM: OMAP5: Reuse prm read_inst/write_inst
  ARM: OMAP5: prm: Allow prm init to succeed
  ARM: OMAP5: timer: Update the clocksource name as per clock data
  ARM: OMAP5: Update SOC id detection code for ES2

"atmel,sama5ek" compatibility sting does not correspond to a
useful board configuration. This d34ek.dts is the only sama5d3
.dts file affected.
Reported-by: NJosh Wu <josh.wu@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add DMA resources to MCI nodes.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add DMA resources to i2c nodes.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: correct 9n12 dma phandle name]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Moving to generic DMA DT binding involves to set #dma-cells to 2.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

For the past three years, we have had a #warning in
mach-at91 about the sdram_selfrefresh_enable or
at91sam9_standby functions possibly not working on
at91sam9263. In the meantime a function was added
to do the right thing on at91sam9g45, which looks like
it should also work on '9263.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
[nicolas.ferre@atmel.com: remove paragraph in commit message]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>

From Jason Cooper:
mvebu driver irqchip for v3.10

 - move the armada irqchip driver to drivers/irqchip/

* tag 'irqchip-3.10' of git://git.infradead.org/users/jcooper/linux:
  irqchip: armada-370-xp: slightly cleanup irq controller driver
  irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
  irqchip: move IRQ driver for Armada 370/XP
  ARM: mvebu: move L2 cache initialization in init_early()
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge branch '3.10-lo/board-cleanup' of git://gitorious.org/linux-omap-dss2/linux into omap-for-v3.10/dss

In preparation for the introduction of MSI support in the IRQ
controller driver, we clarify the implementation of IPI using
additional defines for the manipulation of doorbells. Just like IPIs
are implemented using doorbells, MSIs will also use doorbells, so it
makes sense to do this preparatory cleanup first.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

If we move the IRQ handler function above the initialization function,
we avoid a forward declaration. This wasn't done as part of the
previous commit, in order to increase the readibility of the previous
commit, who was also moving the IRQ controller driver from arch/arm to
drivers/irqchip.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

When the Marvell Armada 370/XP support was included in the kernel, the
drivers/irqchip/ directory didn't exist and the minimal infrastructure
in it also didn't exist. Now that we have those things in place, we
move the Armada 370/XP IRQ controller driver from
arch/arm/mach-mvebu/irq-armada-370-xp.c to
drivers/irqchip/irq-armada-370-xp.c.

Note in order to reduce code movement and therefore ease the review of
this patch, we intentionally introduce a forward declaration of
armada_370_xp_handle_irq(). It is in fact not needed because this
handler can now simply be implemented before
armada_370_xp_mpic_of_init(). That will be done in the next commit.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

In preparation for moving the IRQ controller driver to
drivers/irqchip/, we don't want the IRQ controller driver to be
responsible for initializing the L2 cache. Instead, let's initialize
the L2 cache at the init_early() level, like mach-exynos/common.c is
doing.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

An AT91 SoC that doesn't have a subtype is shown as "Unknown"
in the Linux log message which is not correct.
This was leading to confusion so, add a "none" qualifier to
the subtype property and set this one in the appropriate cases.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The pwm-backlight driver now takes a mandatory regulator that is gotten
during driver probe.  Initialize a dummy regulator to satisfy this
requirement.
Signed-off-by: NAndrew Chew <achew@nvidia.com>
Tested-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated fixed regulator id to avoid errors]
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use pwm_leds driver for the keyboard light and pwm-backlight for the lcd
backlight control (instead of implementing the PWM driver part in the board
file).
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This patch enables BMP085 pressure sensor that can be
found on OMAP4 Blaze Tablet development platform
Signed-off-by: NRuslan Bilovol <ruslan.bilovol@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Merge commit 95241450 ("Merge branch
'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc") added
references to CONFIG_MACH_PCM049 and board-omap4pcm049.o to this
Makefile. But there's no Kconfig symbol MACH_PCM049 and there's no file
board-omap4pcm049.c. This line can safely be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Commit f41caddb ("omap2+: Use Kconfig
symbol in Makefile instead of obj-y") reorganized this Makefile. But,
for some reason, it also added references to CONFIG_MACH_ENCORE and
board-omap3encore.o. But there's no Kconfig symbol MACH_ENCORE and
there's no file board-omap3encore.c. This line can safely be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add missing regulator definitions for lis3lv02d accelerometer. Fixes
the following probe issue:

[   57.737518] lis3lv02d_i2c 3-001d: Failed to get supply 'Vdd': -517
[   57.747100] i2c 3-001d: Driver lis3lv02d_i2c requests probe deferral
Reported-by: NPali Rohár <pali.rohar@gmail.com>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NTony Lindgren <tony@atomide.com>

omap_udc platform device is not registered properly anymore:
CONFIG_USB_GADGET_OMAP was deleted by 193ab2a6 (usb: gadget: allow
multiple gadgets to be built) already in v3.1.

Fix by using CONFIG_USB_OMAP instead. Tested on Nokia 770 by checking
that omap_udc is probed & working properly when built as a module.
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Pull KVM fix from Gleb Natapov:
 "Bugfix for the regression introduced by commit c300aa64"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Allow cross page reads and writes from cached translations.

Pull x86 fixes from Peter Anvin:
 "Two quite small fixes: one a build problem, and the other fixes
  seccomp filters on x32."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix rebuild with EFI_STUB enabled
  x86: remove the x32 syscall bitmask from syscall_get_nr()

Interrupt handlers are always invoked with interrupts disabled, so
remove all uses of the deprecated IRQF_DISABLED flag.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Linux has expected that interrupt handlers are executed with local
interrupts disabled for a while now, so ensure that this is the case on
Alpha even for non-device interrupts such as IPIs.

Without this patch, secondary boot results in the following backtrace:

  warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0()
  trace:
    __local_bh_enable+0xb8/0xd0
    irq_enter+0x74/0xa0
    scheduler_ipi+0x50/0x100
    handle_ipi+0x84/0x260
    do_entint+0x1ac/0x2e0
    irq_exit+0x60/0xa0
    handle_irq+0x98/0x100
    do_entint+0x2c8/0x2e0
    ret_from_sys_call+0x0/0x10
    load_balance+0x3e4/0x870
    cpu_idle+0x24/0x80
    rcu_eqs_enter_common.isra.38+0x0/0x120
    cpu_idle+0x40/0x80
    rest_init+0xc0/0xe0
    _stext+0x1c/0x20

A similar dump occurs if you try to reboot using magic-sysrq.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Due to all of the goodness being packed into today's kernels, the
resulting image isn't as slim as it once was.

In light of this, don't pass -msmall-data to gcc, which otherwise results
in link failures due to impossible relocations when compiling anything but
the most trivial configurations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Tested-by: NThorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes a NULL pointer dereference at boot on UP1500.

Cc: stable@vger.kernel.org
Reviewed-and-Tested-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NJay Estabrook <jay.estabrook@gmail.com>
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NMichael Cree <mcree@orcon.net.nz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for kvm_gfn_to_hva_cache_init functions for
reads and writes that will cross a page.  If the range falls within
the same memslot, then this will be a fast operation.  If the range
is split between two memslots, then the slower kvm_read_guest and
kvm_write_guest are used.

Tested: Test against kvm_clock unit tests.
Signed-off-by: NAndrew Honig <ahonig@google.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Pull device-mapper fixes from Alasdair Kergon:
 "A pair of patches to fix the writethrough mode of the device-mapper
  cache target when the device being cached is not itself wrapped with
  device-mapper."

* tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm cache: reduce bio front_pad size in writeback mode
  dm cache: fix writes to cache device in writethrough mode

Pull PCI fixes from Bjorn Helgaas:
 "PCI updates for v3.9:

  ASPM
      Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"
  kexec
      PCI: Don't try to disable Bus Master on disconnected PCI devices
  Platform ROM images
      PCI: Add PCI ROM helper for platform-provided ROM images
      nouveau: Attempt to use platform-provided ROM image
      radeon: Attempt to use platform-provided ROM image
  Hotplug
      PCI/ACPI: Always resume devices on ACPI wakeup notifications
      PCI/PM: Disable runtime PM of PCIe ports
  EISA
      EISA/PCI: Fix bus res reference
      EISA/PCI: Init EISA early, before PNP"

* tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PM: Disable runtime PM of PCIe ports
  PCI/ACPI: Always resume devices on ACPI wakeup notifications
  PCI: Don't try to disable Bus Master on disconnected PCI devices
  Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"
  radeon: Attempt to use platform-provided ROM image
  nouveau: Attempt to use platform-provided ROM image
  EISA/PCI: Init EISA early, before PNP
  EISA/PCI: Fix bus res reference
  PCI: Add PCI ROM helper for platform-provided ROM images