- 09 2月, 2013 7 次提交
-
-
由 Oleg Nesterov 提交于
trace_uprobe->consumer and "struct uprobe_trace_consumer" add the unnecessary indirection and complicate the code for no reason. This patch simply embeds uprobe_consumer into "struct trace_uprobe", all other changes only fix the compilation errors. Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Oleg Nesterov 提交于
probe_event_enable/disable() check tu->consumer != NULL to avoid the wrong uprobe_register/unregister(). We are going to kill this pointer and "struct uprobe_trace_consumer", so we add the new helper, is_trace_uprobe_enabled(), which can rely on TP_FLAG_TRACE/TP_FLAG_PROFILE instead. Note: the current logic doesn't look optimal, it is not clear why TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably change this later. Also kill the unused TP_FLAG_UPROBE. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
由 Oleg Nesterov 提交于
probe_event_enable/disable() check tu->inode != NULL at the start. This is ugly, if igrab() can fail create_trace_uprobe() should not succeed and "postpone" the failure. And S_ISREG(inode->i_mode) check added by d24d7dbf is not safe. Note: alloc_uprobe() should probably check igrab() != NULL as well. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
由 Oleg Nesterov 提交于
probe_event_enable() does uprobe_register() and only after that sets utc->tu and tu->consumer/flags. This can race with uprobe_dispatcher() which can miss these assignments or see them out of order. Nothing really bad can happen, but this doesn't look clean/safe. And this does not allow to use uprobe_consumer->filter() we are going to add, it is called by uprobe_register() and it needs utc->tu. Change this code to initialize everything before uprobe_register(), and reset tu->consumer/flags if it fails. We can't race with event_disable(), the caller holds event_mutex, and if we could the code would be wrong anyway. In fact I think uprobe_trace_consumer should die, it buys nothing but complicates the code. We can simply add uprobe_consumer into trace_uprobe. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
由 Oleg Nesterov 提交于
create_trace_uprobe() does kern_path() to find ->d_inode, but forgets to do path_put(). We can do this right after igrab(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
由 Oleg Nesterov 提交于
Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is what consumer->handler() needs but uprobe_get_swbp_addr() is not exported. This also simplifies the code and makes it more consistent across the supported architectures. handle_swbp() becomes the only caller of uprobe_get_swbp_addr(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
-
由 Oleg Nesterov 提交于
uprobe_consumer->filter() is pointless in its current form, kill it. We will add it back, but with the different signature/semantics. Perhaps we will even re-introduce the callsite in handler_chain(), but not to just skip uc->handler(). Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
-
- 22 1月, 2013 1 次提交
-
-
由 Jovi Zhang 提交于
Without this patch, we can register a uprobe event for a directory. Enabling such a uprobe event would anyway fail. Example: $ echo 'p /bin:0x4245c0' > /sys/kernel/debug/tracing/uprobe_events However dirctories cannot be valid targets for uprobe. Hence verify if the target is a regular file during the probe registration. Link: http://lkml.kernel.org/r/20130103004212.690763002@goodmis.org Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: NJovi Zhang <bookjovi@gmail.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> [ cleaned up whitespace and removed redundant IS_DIR() check ] Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 18 12月, 2012 1 次提交
-
-
由 Andy Shevchenko 提交于
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 11月, 2012 1 次提交
-
-
由 Daniel Walter 提交于
* remove old string conversions with kstrto* Link: http://lkml.kernel.org/r/20120926200838.GC1244@0x90.atSigned-off-by: NDaniel Walter <sahne@0x90.at> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
- 25 10月, 2012 1 次提交
-
-
由 Jovi Zhang 提交于
There don't have any 'r' prefix in uprobe event naming, remove it. Signed-off-by: NJovi Zhang <bookjovi@gmail.com> Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
- 31 7月, 2012 1 次提交
-
-
由 Andrew Vagin 提交于
A few events are interesting not only for a current task. For example, sched_stat_* events are interesting for a task which wakes up. For this reason, it will be good if such events will be delivered to a target task too. Now a target task can be set by using __perf_task(). The original idea and a draft patch belongs to Peter Zijlstra. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Inspired-by: NPeter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arun Sharma <asharma@fb.com> Signed-off-by: NAndrew Vagin <avagin@openvz.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 07 5月, 2012 1 次提交
-
-
由 Srikar Dronamraju 提交于
Implements trace_event support for uprobes. In its current form it can be used to put probes at a specified offset in a file and dump the required registers when the code flow reaches the probed address. The following example shows how to dump the instruction pointer and %ax a register at the probed text address. Here we are trying to probe zfree in /bin/zsh: # cd /sys/kernel/debug/tracing/ # cat /proc/`pgrep zsh`/maps | grep /bin/zsh | grep r-xp 00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh # objdump -T /bin/zsh | grep -w zfree 0000000000446420 g DF .text 0000000000000012 Base zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events # cat uprobe_events p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420 # echo 1 > events/uprobes/enable # sleep 20 # echo 0 > events/uprobes/enable # cat trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79 Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-