- 27 3月, 2015 3 次提交
-
-
由 Vincent Guittot 提交于
Now that arch_scale_cpu_capacity has been introduced to scale the original capacity, the arch_scale_freq_capacity is no longer used (it was previously used by ARM arch). Remove arch_scale_freq_capacity from the computation of cpu_capacity. The frequency invariance will be handled in the load tracking and not in the CPU capacity. arch_scale_freq_capacity will be revisited for scaling load with the current frequency of the CPUs in a later patch. Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NMorten Rasmussen <morten.rasmussen@arm.com> Cc: Morten.Rasmussen@arm.com Cc: dietmar.eggemann@arm.com Cc: efault@gmx.de Cc: kamalesh@linux.vnet.ibm.com Cc: linaro-kernel@lists.linaro.org Cc: nicolas.pitre@linaro.org Cc: preeti@linux.vnet.ibm.com Cc: riel@redhat.com Link: http://lkml.kernel.org/r/1425052454-25797-4-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Morten Rasmussen 提交于
Add usage contribution tracking for group entities. Unlike se->avg.load_avg_contrib, se->avg.utilization_avg_contrib for group entities is the sum of se->avg.utilization_avg_contrib for all entities on the group runqueue. It is _not_ influenced in any way by the task group h_load. Hence it is representing the actual cpu usage of the group, not its intended load contribution which may differ significantly from the utilization on lightly utilized systems. Signed-off-by: NMorten Rasmussen <morten.rasmussen@arm.com> Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Ben Segall <bsegall@google.com> Cc: Ben Segall <bsegall@google.com> Cc: Morten.Rasmussen@arm.com Cc: Paul Turner <pjt@google.com> Cc: dietmar.eggemann@arm.com Cc: efault@gmx.de Cc: kamalesh@linux.vnet.ibm.com Cc: linaro-kernel@lists.linaro.org Cc: nicolas.pitre@linaro.org Cc: preeti@linux.vnet.ibm.com Cc: riel@redhat.com Link: http://lkml.kernel.org/r/1425052454-25797-3-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Vincent Guittot 提交于
Add new statistics which reflect the average time a task is running on the CPU and the sum of these running time of the tasks on a runqueue. The latter is named utilization_load_avg. This patch is based on the usage metric that was proposed in the 1st versions of the per-entity load tracking patchset by Paul Turner <pjt@google.com> but that has be removed afterwards. This version differs from the original one in the sense that it's not linked to task_group. The rq's utilization_load_avg will be used to check if a rq is overloaded or not instead of trying to compute how many tasks a group of CPUs can handle. Rename runnable_avg_period into avg_period as it is now used with both runnable_avg_sum and running_avg_sum. Add some descriptions of the variables to explain their differences. Signed-off-by: NVincent Guittot <vincent.guittot@linaro.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NMorten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Ben Segall <bsegall@google.com> Cc: Ben Segall <bsegall@google.com> Cc: Morten.Rasmussen@arm.com Cc: Paul Turner <pjt@google.com> Cc: dietmar.eggemann@arm.com Cc: efault@gmx.de Cc: kamalesh@linux.vnet.ibm.com Cc: linaro-kernel@lists.linaro.org Cc: nicolas.pitre@linaro.org Cc: preeti@linux.vnet.ibm.com Cc: riel@redhat.com Link: http://lkml.kernel.org/r/1425052454-25797-2-git-send-email-vincent.guittot@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 23 3月, 2015 11 次提交
-
-
由 Steven Rostedt 提交于
When debugging the latencies on a 40 core box, where we hit 300 to 500 microsecond latencies, I found there was a huge contention on the runqueue locks. Investigating it further, running ftrace, I found that it was due to the pulling of RT tasks. The test that was run was the following: cyclictest --numa -p95 -m -d0 -i100 This created a thread on each CPU, that would set its wakeup in iterations of 100 microseconds. The -d0 means that all the threads had the same interval (100us). Each thread sleeps for 100us and wakes up and measures its latencies. cyclictest is maintained at: git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git What happened was another RT task would be scheduled on one of the CPUs that was running our test, when the other CPU tests went to sleep and scheduled idle. This caused the "pull" operation to execute on all these CPUs. Each one of these saw the RT task that was overloaded on the CPU of the test that was still running, and each one tried to grab that task in a thundering herd way. To grab the task, each thread would do a double rq lock grab, grabbing its own lock as well as the rq of the overloaded CPU. As the sched domains on this box was rather flat for its size, I saw up to 12 CPUs block on this lock at once. This caused a ripple affect with the rq locks especially since the taking was done via a double rq lock, which means that several of the CPUs had their own rq locks held while trying to take this rq lock. As these locks were blocked, any wakeups or load balanceing on these CPUs would also block on these locks, and the wait time escalated. I've tried various methods to lessen the load, but things like an atomic counter to only let one CPU grab the task wont work, because the task may have a limited affinity, and we may pick the wrong CPU to take that lock and do the pull, to only find out that the CPU we picked isn't in the task's affinity. Instead of doing the PULL, I now have the CPUs that want the pull to send over an IPI to the overloaded CPU, and let that CPU pick what CPU to push the task to. No more need to grab the rq lock, and the push/pull algorithm still works fine. With this patch, the latency dropped to just 150us over a 20 hour run. Without the patch, the huge latencies would trigger in seconds. I've created a new sched feature called RT_PUSH_IPI, which is enabled by default. When RT_PUSH_IPI is not enabled, the old method of grabbing the rq locks and having the pulling CPU do the work is implemented. When RT_PUSH_IPI is enabled, the IPI is sent to the overloaded CPU to do a push. To enabled or disable this at run time: # mount -t debugfs nodev /sys/kernel/debug # echo RT_PUSH_IPI > /sys/kernel/debug/sched_features or # echo NO_RT_PUSH_IPI > /sys/kernel/debug/sched_features Update: This original patch would send an IPI to all CPUs in the RT overload list. But that could theoretically cause the reverse issue. That is, there could be lots of overloaded RT queues and one CPU lowers its priority. It would then send an IPI to all the overloaded RT queues and they could then all try to grab the rq lock of the CPU lowering its priority, and then we have the same problem. The latest design sends out only one IPI to the first overloaded CPU. It tries to push any tasks that it can, and then looks for the next overloaded CPU that can push to the source CPU. The IPIs stop when all overloaded CPUs that have pushable tasks that have priorities greater than the source CPU are covered. In case the source CPU lowers its priority again, a flag is set to tell the IPI traversal to restart with the first RT overloaded CPU after the source CPU. Parts-suggested-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Joern Engel <joern@purestorage.com> Cc: Clark Williams <williams@redhat.com> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150318144946.2f3cc982@gandalf.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Steven Rostedt 提交于
When CONFIG_IRQ_WORK is not defined (difficult to do, as it also requires CONFIG_PRINTK not to be defined), we get a build failure: kernel/built-in.o: In function `flush_smp_call_function_queue': kernel/smp.c:263: undefined reference to `irq_work_run' kernel/smp.c:263: undefined reference to `irq_work_run' Makefile:933: recipe for target 'vmlinux' failed Simplest thing to do is to make irq_work_run() a nop when not set. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20150319101851.4d224d9b@gandalf.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Brian Silverman 提交于
When non-realtime tasks get priority-inheritance boosted to a realtime scheduling class, RLIMIT_RTTIME starts to apply to them. However, the counter used for checking this (the same one used for SCHED_RR timeslices) was not getting reset. This meant that tasks running with a non-realtime scheduling class which are repeatedly boosted to a realtime one, but never block while they are running realtime, eventually hit the timeout without ever running for a time over the limit. This patch resets the realtime timeslice counter when un-PI-boosting from an RT to a non-RT scheduling class. I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT mutex which induces priority boosting and spins while boosted that gets killed by a SIGXCPU on non-fixed kernels but doesn't with this patch applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and does happen eventually with PREEMPT_VOLUNTARY kernels. Signed-off-by: NBrian Silverman <brian@peloton-tech.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: austin@peloton-tech.com Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull bugfix for md from Neil Brown: "One fix for md in 4.0-rc4 Regression in recent patch causes crash on error path" * tag 'md/4.0-rc4-fix' of git://neil.brown.name/md: md: fix problems with freeing private data after ->run failure.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core fixes from Greg KH: "Here are two bugfixes for things reported. One regression in kernfs, and another issue fixed in the LZ4 code that was fixed in the "upstream" codebase that solves a reported kernel crash Both have been in linux-next for a while" * tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: LZ4 : fix the data abort issue kernfs: handle poll correctly on 'direct_read' files.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fixes from Greg KH: "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that were merged in 4.0-rc1 that cause regressions. So let's revert them for now and they will be reworked and resent sometime in the future. All have been tested in linux-next for a while" * tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "pcmcia: add a new resource manager for non ISA systems" Revert "pcmcia: fix incorrect bracketing on a test" Revert "pcmcia: add missing include for new pci resource handler"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are four small staging driver fixes, all for the vt6656 and vt6655 drivers, that resolve some reported issues with them. All of these patches have been in linux next for a while" * tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: vt6655: Fix late setting of byRFType. vt6655: RFbSetPower fix missing rate RATE_12M staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M staging: vt6655: vnt_tx_packet fix dma_idx selection.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver fix from Greg KH: "Here's a single 8250 serial driver that fixes a reported deadlock with the serial console and the tty driver. It's been in linux-next for a while now" * tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Fix deadlock in LCR workaround
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB / PHY driver fixes from Greg KH: "Here's a number of USB and PHY driver fixes for 4.0-rc5. The largest thing here is a revert of a gadget function driver patch that removes 500 lines of code. Other than that, it's a number of reported bugs fixes and new quirk/id entries. All have been in linux-next for a while" * tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: common: otg-fsm: only signal connect after switching to peripheral uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices USB: ehci-atmel: rework clk handling MAINTAINERS: add entry for USB OTG FSM usb: chipidea: otg: add a_alt_hnp_support response for B device phy: omap-usb2: Fix missing clk_prepare call when using old dt name phy: ti/omap: Fix modalias phy: core: Fixup return value of phy_exit when !pm_runtime_enabled phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof phy: twl4030-usb: Remove redundant assignment for twl->linkstat phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0] phy: Find the right match in devm_phy_destroy() phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation phy: samsung-usb2: Remove NULL terminating entry from phys array phy: hix5hd2-sata: Check return value of platform_get_resource phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function Revert "usb: gadget: zero: Add support for interrupt EP" Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'" ...
-
- 22 3月, 2015 11 次提交
-
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave dmaengine fixes from Vinod Koul: "Four fixes for dw, pl08x, imx-sdma and at_hdmac driver. Nothing unusual here, simple fixes to these drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pl08x: Define capabilities for generic capabilities reporting dmaengine: dw: append MODULE_ALIAS for platform driver dmaengine: imx-sdma: switch to dynamic context mode after script loaded dmaengine: at_hdmac: Fix calculation of the residual bytes
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "These are fixes for recent regressions (PCI/ACPI resources and at91 RTC locking), a stable-candidate powercap RAPL driver fix and two ARM cpuidle fixes (one stable-candidate too). Specifics: - Revert a recent PCI commit related to IRQ resources management that introduced a regression for drivers attempting to bind to devices whose previous drivers did not balance pci_enable_device() and pci_disable_device() as expected (Rafael J Wysocki). - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a recent commit related to wakeup interrupt handling (Dan Carpenter). - Allow the power capping RAPL (Running-Average Power Limit) driver to use different energy units for domains within one CPU package which is necessary to handle Intel Haswell EP processors correctly (Jacob Pan). - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by updating the target residency and exit latency numbers for those chips (Sebastien Rannou). - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice in a row before cpu_pm_exit() is called on the same CPU which breaks the core's assumptions regarding the usage of those functions (Gregory Clement)" * tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "x86/PCI: Refine the way to release PCI IRQ resources" rtc: at91rm9200: double locking bug in at91_rtc_interrupt() powercap / RAPL: handle domains with different energy units cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs cpuidle: mvebu: Fix the CPU PM notifier usage
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm updates from Dave Airlie: "A bunch of fixes across drivers: radeon: disable two ended allocation for now, it breaks some stuff amdkfd: misc fixes nouveau: fix irq loop problem, add basic support for GM206 (new hw) i915: fix some WARNs people were seeing exynos: fix some iommu interactions causing boot failures" * git://people.freedesktop.org/~airlied/linux: drm/radeon: drop ttm two ended allocation drm/exynos: fix the initialization order in FIMD drm/exynos: fix typo config name correctly. drm/exynos: Check for NULL dereference of crtc drm/exynos: IS_ERR() vs NULL bug drm/exynos: remove unused files drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/nouveau/bios: fix i2c table parsing for dcb 4.1 drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204) drm/nouveau/device: post write to NV_PMC_BOOT_1 when flipping endian switch drm/nouveau/gr/gf100: fix some accidental or'ing of buffer addresses drm/nouveau/fifo/nv04: remove the loop from the interrupt handler drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue drm/i915: Ensure plane->state->fb stays in sync with plane->fb
-
由 Linus Torvalds 提交于
Merge tag 'devicetree-fixes-for-4.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more DeviceTree fixes vfom Rob Herring: - revert setting stdout-path as preferred console. This caused regressions in PowerMACs and other systems. - yet another fix for stdout-path option parsing. - fix error path handling in of_irq_parse_one * tag 'devicetree-fixes-for-4.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Revert "of: Fix premature bootconsole disable with 'stdout-path'" of: handle both '/' and ':' in path strings of: unittest: Add option string test case with longer path of/irq: Fix of_irq_parse_one() returned error codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "Here are current target-pending fixes for v4.0-rc5 code that have made their way into the queue over the last weeks. The fixes this round include: - Fix long-standing iser-target logout bug related to early conn_logout_comp completion, resulting in iscsi_conn use-after-tree OOpsen. (Sagi + nab) - Fix long-standing tcm_fc bug in ft_invl_hw_context() failure handing for DDP hw offload. (DanC) - Fix incorrect use of unprotected __transport_register_session() in tcm_qla2xxx + other single local se_node_acl fabrics. (Bart) - Fix reference leak in target_submit_cmd() -> target_get_sess_cmd() for ack_kref=1 failure path. (Bart) - Fix pSCSI backend ->get_device_type() statistics OOPs with un-configured device. (Olaf + nab) - Fix virtual LUN=0 target_configure_device failure OOPs at modprobe time. (Claudio + nab) - Fix FUA write false positive failure regression in v4.0-rc1 code. (Christophe Vu-Brugier + HCH)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0 target: Fix virtual LUN=0 target_configure_device failure OOPs target/pscsi: Fix NULL pointer dereference in get_device_type tcm_fc: missing curly braces in ft_invl_hw_context() target: Fix reference leak in target_get_sess_cmd() error path loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session tcm_qla2xxx: Fix incorrect use of __transport_register_session iscsi-target: Avoid early conn_logout_comp for iser connections Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target" target: Disallow changing of WRITE cache/FUA attrs after export
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull devicemapper fixes from Mike Snitzer: "A handful of stable fixes for DM: - fix thin target to always zero-fill reads to unprovisioned blocks - fix to interlock device destruction's suspend from internal suspends - fix 2 snapshot exception store handover bugs - fix dm-io to cope with DISCARD and WRITE_SAME capabilities changing" * tag 'dm-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm io: deal with wandering queue limits when handling REQ_DISCARD and REQ_WRITE_SAME dm snapshot: suspend merging snapshot when doing exception handover dm snapshot: suspend origin when doing exception handover dm: hold suspend_lock while suspending device during device deletion dm thin: fix to consistently zero-fill reads to unprovisioned blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "Most of these are fixing extent reservation accounting, or corners with tree writeback during commit. Josef's set does add a test, which isn't strictly a fix, but it'll keep us from making this same mistake again" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix outstanding_extents accounting in DIO Btrfs: add sanity test for outstanding_extents accounting Btrfs: just free dummy extent buffers Btrfs: account merges/splits properly Btrfs: prepare block group cache before writing Btrfs: fix ASSERT(list_empty(&cur_trans->dirty_bgs_list) Btrfs: account for the correct number of extents for delalloc reservations Btrfs: fix merge delalloc logic Btrfs: fix comp_oper to get right order Btrfs: catch transaction abortion after waiting for it btrfs: fix sizeof format specifier in btrfs_check_super_valid()
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bufix from Bruce Fields: "This is a fix for a crash easily triggered by 4.1 activity to a server built with CONFIG_NFSD_PNFS. There are some more bugfixes queued up that I intend to pass along next week, but this is the most critical" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: Subject: nfsd: don't recursively call nfsd4_cb_layout_fail
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBI fix from Artem Bityutskiy: "This fixes a bug introduced during the v4.0 merge window where we forgot to put braces where they should be" * tag 'upstream-4.0-rc5' of git://git.infradead.org/linux-ubifs: UBI: fix missing brace control flow
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - mm switching fix where the kernel pgd ends up in the user TTBR0 after returning from an EFI run-time services call - fix __GFP_ZERO handling for atomic pool and CMA DMA allocations (the generic code does get the gfp flags, so it's left with the arch code to memzero accordingly) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Honor __GFP_ZERO in dma allocations arm64: efi: don't restore TTBR0 if active_mm points at init_mm
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Another few ARM fixes. Fabrice fixed the L2 cache DT parsing to allow prefetch configuration to be specified even when the cache size parsing fails. Laura noticed that the setting of page attributes wasn't working for modules due to is_module_addr() always returning false. Marc Gonzalez (aka Mason) noticed a potential latent bug with the way we read one of the CPUID registers (where we could attempt to read a non-present CPUID register which may fault.) I've fixed an issue where 32-bit DMA masks were failing with memory which extended to the top of physical address space, and I've also added debugging output of the page tables when we hit a data access exception which we don't specifically handle - prompted by the lack of information in a bug report" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8313/1: Use read_cpuid_ext() macro instead of inline asm ARM: 8311/1: Don't use is_module_addr in setting page attributes ARM: 8310/1: l2c: Fix prefetch settings dt parsing ARM: dump pgd, pmd and pte states on unhandled data abort faults ARM: dma-api: fix off-by-one error in __dma_supported()
-
- 21 3月, 2015 4 次提交
-
-
由 Rafael J. Wysocki 提交于
* pm-cpuidle: cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs cpuidle: mvebu: Fix the CPU PM notifier usage * powercap: powercap / RAPL: handle domains with different energy units * irq-pm: rtc: at91rm9200: double locking bug in at91_rtc_interrupt() * acpi-resources: Revert "x86/PCI: Refine the way to release PCI IRQ resources"
-
由 NeilBrown 提交于
If ->run() fails, it can either free the data structures it allocated, or leave that task to ->free() which will be called on failures. However: md.c calls ->free() even if ->private_data is NULL, which causes problems in some personalities. raid0.c frees the data, but doesn't clear ->private_data, which will become a problem when we fix md.c So better fix both these issues at once. Reported-by: NRichard W.M. Jones <rjones@redhat.com> Fixes: 5aa61f42 URL: https://bugzilla.kernel.org/show_bug.cgi?id=94381Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Suzuki K. Poulose 提交于
Current implementation doesn't zero out the pages allocated. Honor the __GFP_ZERO flag and zero out if set. Cc: <stable@vger.kernel.org> # v3.14+ Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
init_mm isn't a normal mm: it has swapper_pg_dir as its pgd (which contains kernel mappings) and is used as the active_mm for the idle thread. When restoring the pgd after an EFI call, we write current->active_mm into TTBR0. If the current task is actually the idle thread (e.g. when initialising the EFI RTC before entering userspace), then the TLB can erroneously populate itself with junk global entries as a result of speculative table walks. When we do eventually return to userspace, the task can end up hitting these junk mappings leading to lockups, corruption or crashes. This patch fixes the problem in the same way as the CPU suspend code by ensuring that we never switch to the init_mm in efi_set_pgd and instead point TTBR0 at the zero page. A check is also added to cpu_switch_mm to BUG if we get passed swapper_pg_dir. Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Fixes: f3cdfd23 ("arm64/efi: move SetVirtualAddressMap() to UEFI stub") Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 20 3月, 2015 11 次提交
-
-
由 Rafael J. Wysocki 提交于
Commit b4b55cda (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Backporting a couple of plane related fixes from drm-next to v4.0. * tag 'drm-intel-fixes-2015-03-19' of git://anongit.freedesktop.org/drm-intel: drm/i915: Make sure the primary plane is enabled before reading out the fb state drm/i915: Ensure plane->state->fb stays in sync with plane->fb
-
由 Dave Airlie 提交于
Merge tag 'drm-amdkfd-fixes-2015-03-19' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Fixing SDMA initialization when in non-HWS mode (debug mode) - Memory leak fix when destroying kernel queue - Fix number of available compute pipelines according to new firmware * tag 'drm-amdkfd-fixes-2015-03-19' of git://people.freedesktop.org/~gabbayo/linux: drm/radeon: Changing number of compute pipe lines drm/amdkfd: Fix SDMA queue init. in non-HWS mode drm/amdkfd: destroy mqd when destroying kernel queue
-
由 Christophe Vu-Brugier 提交于
A check that rejects a CDB with FUA bit set if no write cache is emulated was added by the following commit: fde9f50f target: Add sanity checks for DPO/FUA bit usage The condition is as follows: if (!dev->dev_attrib.emulate_fua_write || !dev->dev_attrib.emulate_write_cache) However, this check is wrong if the backend device supports WCE but "emulate_write_cache" is disabled. This patch uses se_dev_check_wce() (previously named spc_check_dev_wce) to invoke transport->get_write_cache() if the device has a write cache or check the "emulate_write_cache" attribute otherwise. Reported-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NChristophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch fixes a NULL pointer dereference triggered by a late target_configure_device() -> alloc_workqueue() failure that results in target_free_device() being called with DF_CONFIGURED already set, which subsequently OOPses in destroy_workqueue() code. Currently this only happens at modprobe target_core_mod time when core_dev_setup_virtual_lun0() -> target_configure_device() fails, and the explicit target_free_device() gets called. To address this bug originally introduced by commit 0fd97ccf, go ahead and move DF_CONFIGURED to end of target_configure_device() code to handle this special failure case. Reported-by: NClaudio Fleiner <cmf@daterainc.com> Cc: Claudio Fleiner <cmf@daterainc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch fixes a NULL pointer dereference OOPs with pSCSI backends within target_core_stat.c code. The bug is caused by a configfs attr read if no pscsi_dev_virt->pdv_sd has been configured. Reported-by: NOlaf Hering <olaf@aepfle.de> Cc: <stable@vger.kernel.org> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Dan Carpenter 提交于
This patch adds a missing set of conditional check braces in ft_invl_hw_context() originally introduced by commit dcd998cc when handling DDP failures in ft_recv_write_data() code. commit dcd998cc Author: Kiran Patil <kiran.patil@intel.com> Date: Wed Aug 3 09:20:01 2011 +0000 tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: Kiran Patil <kiran.patil@intel.com> Cc: <stable@vger.kernel.org> # 3.1+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Bart Van Assche 提交于
This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down is true within target_get_sess_cmd() submission path code. This se_cmd reference leak can occur during active session shutdown when ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: <stable@vger.kernel.org> # 3.6+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Bart Van Assche 提交于
This patch changes loopback, usb-gadget, vhost-scsi and xen-scsiback fabric code to invoke transport_register_session() instead of the unprotected flavour, to ensure se_tpg->session_lock is taken when adding new session list nodes to se_tpg->tpg_sess_list. Note that since these four fabric drivers already hold their own internal TPG mutexes when accessing se_tpg->tpg_sess_list, and consist of a single se_session created through configfs attribute access, no list corruption can currently occur. So for correctness sake, go ahead and use the se_tpg->session_lock protected version for these four fabric drivers. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Bart Van Assche 提交于
This patch fixes the incorrect use of __transport_register_session() in tcm_qla2xxx_check_initiator_node_acl() code, that does not perform explicit se_tpg->session_lock when accessing se_tpg->tpg_sess_list to add new se_sess nodes. Given that tcm_qla2xxx_check_initiator_node_acl() is not called with qla_hw->hardware_lock held for all accesses of ->tpg_sess_list, the code should be using transport_register_session() instead. Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: <stable@vger.kernel.org> # 3.5+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch fixes a iser specific logout bug where early complete() of conn->conn_logout_comp in iscsit_close_connection() was causing isert_wait4logout() to complete too soon, triggering a use after free NULL pointer dereference of iscsi_conn memory. The complete() was originally added for traditional iscsi-target when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given iser-target does not wait in logout failure, this special case needs to be avoided. Reported-by: NSagi Grimberg <sagig@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Slava Shwartsman <valyushash@gmail.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-