- 13 4月, 2007 9 次提交
-
-
由 Stephen Rothwell 提交于
This is more consistent and gets us closer to the Sparc code. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This is more consistent and gets us closer to the Sparc code. We add a device_is_compatible define for compatibility during the change over. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This is more consistent and gets us closer to the Sparc code. We add a get_property define for compatibility during the change over. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Giuliano Pochini 提交于
72486f1f inverted the sense for enabling hotplug CPU controls without reference to any other architecture other than i386, ia64 and PowerPC. This left everyone else without hotplug CPU control. Fix powerpc for this brain damage. (akpm: patch adapted from rmk's ARM fix. Changelog stolen from rmk) Signed-off-by: NGiuliano Pochini <pochini@shiny.it> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Sonny Rao 提交于
This is now inaccurate because we may not have entered prom_init() and r3 is overwritten immediately anyway. Signed-off-by: NSonny Rao <sonny@burdell.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Remove unneeded inclusion of linux/ide.h It does not compile with CONFIG_BLOCK=n. Remove asm/ide.h from ksyms file, it gets included earlier via linux/ide.h. Compile tested with all defconfig files. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jake Moilanen 提交于
There are many adapters which cannot handle DMAing across any 4 GB boundary. For instance, the latest Emulex adapters. This normally is not an issue as firmware gives dma-windows under 4gigs. However, some of the new System-P boxes have dma-windows above 4gigs, and this present a problem. During initialization of the IOMMU tables, the last entry at each 4GB boundary is marked as used. Thus no mappings can cross the boundary. If a table ends at a 4GB boundary, the entry is not marked as used. A boot option to remove this 4GB protection is given w/ protect4gb=off. This exposes the potential issue for driver and hardware development purposes. Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Sylvain Munaut 提交于
Adding this handler allow userspace to properly handle the module autoloading. The generation of the uevent itself is now common to all bus using of_device, so not much code here. Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Sylvain Munaut 提交于
This common uevent handler allow the several bus types based on of_device to generate the uevent properly and avoiding code duplication. This handlers take a struct device as argument and can therefore be used as the uevent call directly if no special treatment is needed for the bus. Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 26 3月, 2007 5 次提交
-
-
由 anton@samba.org 提交于
Use lowercase for hex printouts in oops messages. The number of times I have tried to copy and paste from an oops into an objdump search... Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 anton@samba.org 提交于
Looks like someone got this backwards, highlighting the perils of the ? : !!! :) Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 anton@samba.org 提交于
Handle recursive oopses, like on x86. We had a few cases recently where we locked up in oops printing and didnt make it into crashdump. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 anton@samba.org 提交于
Move pmac_backlight_unblank into its own function and only take the pmac_backlight_mutex when we are on a pmac for that added bit of paranoia. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 anton@samba.org 提交于
Add missing oops_enter/oops_exit, makes pause_on_oops boot parameter work. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 22 3月, 2007 2 次提交
-
-
由 Anton Blanchard 提交于
Remove last_syscall from 32bit powerpc, its been gone in 64bit for years. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
We already have an inline __get_SP, no need for yet another one. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 16 3月, 2007 4 次提交
-
-
由 Joachim Fenkes 提交于
This adds two sysfs attributes to /sys/bus/ibmebus which can be used to notify the ebus driver of added / removed ebus devices in the OF device tree. Echoing the device's location code (as found in the OFDT "ibm,loc-code" property) into the "probe" attribute will notify ebus of addition of the device and cause the appropriate device driver's probe function to be called on the device. Likewise, echoing the location code into the "remove" attribute will cause the device to be removed from the system. The writes will block until the respective operation has finished and return an error code if the operation failed. In addition, two minor tidbits are fixed: - The fake root device used to provide a common parent for all ebus devices is now based on device instead of of_device - it had no associated devtree node. This saves several checks throughout the ebus driver. - The sysfs attributes are now generated automagically by device_register() instead of by the ibmebus code, which saves a few compiler warnings about unused return codes. Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Joachim Fenkes 提交于
This fixes a lot of whitespace in ibmebus.[ch] Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mark A. Greer 提交于
Currently, early_init() in setup_32.c zeroes from '_bss_start' to '_end'. It should only zero from '__bss_start' to '__bss_stop'. This patch does that. Signed-off-by: NMark A. Greer <mgreer@mvista.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mathieu Desnoyers 提交于
Fix atomicity of TIF update in flush_thread() for powerpc Fixes it correctly with *_ti_thread_flag. Race : parent process executing : sys_ptrace() (lock_kernel()) (ptrace_get_task_struct(pid)) arch_ptrace() ptrace_detach() ptrace_disable(child); clear_singlestep(child); clear_tsk_thread_flag(child, TIF_SINGLESTEP); (which clears the TIF_SINGLESTEP flag atomically from a different process) (put_task_struct(child)) (unlock_kernel()) And at the same time, in the child process : sys_execve() do_execve() search_binary_handler() load_elf_binary() flush_old_exec() flush_thread() doing a non-atomic thread flag update Applies on 2.6.20. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 3月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 3月, 2007 7 次提交
-
-
由 Jake Moilanen 提交于
750CL cputable entry from Steve Winiecki. Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
It always returned 0 and noone checked. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This allows us to hide pci_dma_ops. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This will allow us to build without PCI easier. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jake Moilanen 提交于
There are many adapters which can not handle DMAing acrosss any 4 GB boundary. For instance the latest Emulex adapters. This normally is not an issue as firmware gives us dma-windows under 4gigs. However, some of the new System-P boxes have dma-windows above 4gigs, and this present a problem. I propose fixing it in the IOMMU allocation instead of making each driver protect against it as it is more efficient, and won't require changing every driver which has not considered this issue. This patch checks to see if the mapping spans a 4 gig boundary, and if it does, retries the allocation. It tries the next allocation at the start of the crossed 4 gig boundary. Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 MOKUNO Masakazu 提交于
Remove some redundant isync instructions. enable_64b_mode() already does an isync, so there is no need to do it again. Signed-off-by: NMOKUNO, Masakazu <mokuno@sm.sony.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 3月, 2007 5 次提交
-
-
由 David Gibson 提交于
At present, when an initrd is passed to the kernel used flat device tree properties, the memory the initrd occupies must also be reserved in the flat tree's reserve map, or the kernel may overwrite it. That makes life more complicated than it could be for the bootwrapper. This patch makes the kernel automatically reserve the initrd's space. That in turn requires parsing the initrd parameters earlier than they are currently, in early_init_dt_scan_chosen() instead of check_for_initrd(). Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Gibson 提交于
At present calling lmb_reserve() (and hence lmb_add_region()) twice for exactly the same memory region will cause strange behaviour. This makes life difficult when booting from a flat device tree with memory reserve map. Which regions are automatically reserved by the kernel has changed over time, so it's quite possible a newer kernel could attempt to auto-reserve a region which is also explicitly listed in the device tree's reserve map, leading to trouble. This patch avoids the problem by making lmb_reserve() ignore a call to reserve a previously reserved region. It also removes a now redundant test designed to avoid one specific case of the problem noted above. At present, this patch deals only with duplicate reservations of an identical region. Attempting to reserve two different, but overlapping regions will still cause problems. I might post another patch later dealing with this case, but I'm avoiding it now since it is substantially more complicated to deal with, less likely to occur and more likely to indicate a genuine bug elsewhere if it does occur. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
If something has overflowed or corrupted the stack and causes an oops, and we try to print a stack trace, that will call validate_sp, which can itself cause an oops if the cpu field of the thread_info struct at the bottom of the stack has been corrupted (if CONFIG_IRQSTACKS is set). This makes debugging harder. To avoid the second oops, this adds a check to make sure that the cpu number is reasonable before using it to check whether the stack is on the softirq or hardirq stack. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This function spews a warning due to possible use of an uninitialized variable. This can happen on broken device-trees or when called with a NULL argument. Makes ure we properly fail instead. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
970MP rev 1.0 is reported to have nonworking DEEPNAP support, we've had bug reports of lockups on those machines. Appearantly Apple used them on some dual-core dual-cpu systems. Rev 1.1 is OK, and that's the one that all 4-way systems seem to use. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 05 3月, 2007 1 次提交
-
-
由 Eric W. Biederman 提交于
In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 2月, 2007 2 次提交
-
-
由 Richard Purdie 提交于
Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
backlight_device->sem has a very specific use as documented in the header file. The external users of this are using it for a different reason, to serialise access to the update_status() method. backlight users were supposed to implement their own internal serialisation of update_status() if needed but everyone is doing things differently and incorrectly. Therefore add a global mutex to take care of serialisation for everyone, once and for all. Locking for get_brightness remains optional since most users don't need it. Also update the lcd class in a similar way. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
- 18 2月, 2007 1 次提交
-
-
由 Tobias Klauser 提交于
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 17 2月, 2007 1 次提交
-
-
由 Timur Tabi 提交于
Add function of_get_mac_address(), which obtains the best MAC address to use from the device tree by checking various properties in order. The order is: 'mac-address', then 'local-mac-address', then 'address'. It skips properties that contain invalid MAC addresses, which were probably not initialized by U-Boot. Update gfar_of_init() and fs_enet_of_init() in fsl_soc.c to call of_get_mac_address(). Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 16 2月, 2007 1 次提交
-
-
由 Dave Jones 提交于
Without this, building drivers/serial/of_serial.c as a module fails. WARNING: ".of_find_property" [drivers/serial/of_serial.ko] undefined! Signed-off-by: NDave Jones <davej@redhat.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Eric W. Biederman 提交于
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-