- 06 1月, 2009 3 次提交
-
-
由 Sean MacLennan 提交于
The current ndfc driver only compiles under arch/ppc. This arch was removed from the kernel. I notice the event entry for the ndfc in Kconfig has been removed in 2.6.28. This patch converts the ndfc to a proper OF (OpenFirmware) driver. I can give a working example of the DTS if needed. The patch has been in production use on the PIKA Warp Appliance and is in use by others. The Warp basically boots from NAND, so the ndfc driver is very important to us. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Acked-By: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
git://git.infradead.org/users/dedekind/mtd-tests-2.6由 David Woodhouse 提交于
Conflicts: drivers/mtd/Makefile
-
- 05 1月, 2009 36 次提交
-
-
由 Alexey Korolev 提交于
We have two components to manage LPDDR flash memories in Linux. 1. It is a driver for chip probing and reading its capabilities 2. It is a device operations driver. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
Physmap is a generic map driver for different platforms and flash types. We added support of LPDDR to physmap. All changes here are related to introduction of new pfow_base parameter. This parameter is valid in case of LPDDR chips only. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
We need to supply additional parameter to mapping driver and tell LPDDR drivers where PFOW window is in chip mapping. It leads to necessity of map_info structure extendoing. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
Driver which handles device command operation. Details on device operations are available here: http://www.numonyx.com/Documents/Datasheets/DS-315768_Velocity-Discrete.pdfSigned-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
LPDDR chips use PFOW window for sending commands, reading status and capabilites requesting. This pfow.h - contains definitions for PFOW window fileds, possible commands, error flags and some common macro function to avoid code duplications. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
There are declaraton of structures and macros definitions necessary for operations with QINFO in this patch. Signed-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Alexey Korolev 提交于
LPDDR flash chips are based on completely new kind of chips probing. Device capabilities are available via special request. We sent field request command which contains Major and Minor numbers - and recieve corresponend value. All requests are performed within PFOW window. Detailed information about qinfo records can be found here: http://www.numonyx.com/Documents/Datasheets/DS-315768_Velocity-Discrete.pdfSigned-off-by: NAlexey Korolev <akorolev@infradead.org> Acked-by: NJared Hulbert <jaredeh@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Matt Reimer 提交于
The various fields in NDTR{01} are in units of clock ticks minus one, but the ns2cycle macro mistakenly adds one, inflating the number of clock ticks and making it impossible to set any of these fields to zero. Signed-off-by: NMatt Reimer <mreimer@vpop.net> Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Matt Reimer 提交于
Reads from non-page-aligned addresses were broken because while the address to read from was correctly written to NDCB*, a full page was always read. Fix this by ignoring the column and only using the page address. I suspect this whole-page behavior is due to the controller's need to read the entire page in order to generate correct ECC. In the non-ECC case this could be optimized to use the column address, and to set the read length to what is being requested rather than the length of an entire page. Signed-off-by: NMatt Reimer <mreimer@vpop.net> Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Randy Dunlap 提交于
Fix sched.h references: build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: 'PF_MEMALLOC' undeclared (first use in this function) build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1328: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: dereferencing pointer to incomplete type build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: 'PF_MEMALLOC' undeclared (first use in this function) build-r7149.out:make[4]: *** [drivers/mtd/nand/nandsim.o] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Julia Lawall 提交于
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6由 David Woodhouse 提交于
Conflicts: arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/poodle.c arch/arm/mach-pxa/spitz.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current由 Linus Torvalds 提交于
* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: audit: validate comparison operations, store them in sane form clean up audit_rule_{add,del} a bit make sure that filterkey of task,always rules is reported audit rules ordering, part 2 fixing audit rule ordering mess, part 1 audit_update_lsm_rules() misses the audit_inode_hash[] ones sanitize audit_log_capset() sanitize audit_fd_pair() sanitize audit_mq_open() sanitize AUDIT_MQ_SENDRECV sanitize audit_mq_notify() sanitize audit_mq_getsetattr() sanitize audit_ipc_set_perm() sanitize audit_ipc_obj() sanitize audit_socketcall don't reallocate buffer in every audit_sockaddr()
-
由 Alessandro Zummo 提交于
Add standard interfaces for alarm/update irqs enabling. Drivers are no more required to implement equivalent ioctl code as rtc-dev will provide it. UIE emulation should now be handled correctly and will work even for those RTC drivers who cannot be configured to do both UIE and AIE. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: NNick Piggin <npiggin@suse.de> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bruno Prémont 提交于
The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits; CURSOR_SIZE is defined as (8 * 1024). Using up twice 1k on stack is too much for 4k-stack (though it works with 8k-stacks). Make those two variables kzalloc'ed to preserve stack space. Also merge the whole lot of local struct's in viafb_ioctl into a union so the stack usage gets minimized here as well. (struct's are only accessed in their indicidual IOCTL case) This second part is only compile-tested as I know of no userspace app using the IOCTLs. Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org> Cc: <JosephChan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pekka Enberg 提交于
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in <linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to filesystem specific header files to break the hidden dependency to struct ext[234]_sb_info. Also, while at it, convert the macros to static inlines to try make up for all the times I broke Andrew Morton's tree. Acked-by: NAndreas Dilger <adilger@sun.com> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Include header files as used/needed: In file included from drivers/leds/leds-dac124s085.c:16: include/linux/spi/spi.h:66: error: field 'dev' has incomplete type include/linux/spi/spi.h: In function 'to_spi_device': include/linux/spi/spi.h:100: warning: type defaults to 'int' in declaration of '__mptr' ... Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adam Lackorzynski 提交于
The flush_cache_vmap in vmap_page_range() is called with the end of the range twice. The following patch fixes this for me. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
The race is calling cgroup_clone() while umounting the ns cgroup subsys, and thus cgroup_clone() might access invalid cgroup_fs, or kill_sb() is called after cgroup_clone() created a new dir in it. The BUG I triggered is BUG_ON(root->number_of_cgroups != 1); ------------[ cut here ]------------ kernel BUG at kernel/cgroup.c:1093! invalid opcode: 0000 [#1] SMP ... Process umount (pid: 5177, ti=e411e000 task=e40c4670 task.ti=e411e000) ... Call Trace: [<c0493df7>] ? deactivate_super+0x3f/0x51 [<c04a3600>] ? mntput_no_expire+0xb3/0xdd [<c04a3ab2>] ? sys_umount+0x265/0x2ac [<c04a3b06>] ? sys_oldumount+0xd/0xf [<c0403911>] ? sysenter_do_call+0x12/0x31 ... EIP: [<c0456e76>] cgroup_kill_sb+0x23/0xe0 SS:ESP 0068:e411ef2c ---[ end trace c766c1be3bf944ac ]--- Cc: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Don't store the field->op in the messy (and very inconvenient for e.g. audit_comparator()) form; translate to dense set of values and do full validation of userland-submitted value while we are at it. ->audit_init_rule() and ->audit_match_rule() get new values now; in-tree instances updated. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Fix the actual rule listing; add per-type lists _not_ used for matching, with all exit,... sitting on one such list. Simplifies "do something for all rules" logics, while we are at it... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Problem: ordering between the rules on exit chain is currently lost; all watch and inode rules are listed after everything else _and_ exit,never on one kind doesn't stop exit,always on another from being matched. Solution: assign priorities to rules, keep track of the current highest-priority matching rule and its result (always/never). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* no allocations * return void * don't duplicate checked for dummy context Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* no allocations * return void Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* don't bother with allocations * don't do double copy_from_user() * don't duplicate parts of check for audit_dummy_context() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* logging the original value of *msg_prio in mq_timedreceive(2) is insane - the argument is write-only (i.e. syscall always ignores the original value and only overwrites it). * merge __audit_mq_timed{send,receive} * don't do copy_from_user() twice * don't mess with allocations in auditsc part * ... and don't bother checking !audit_enabled and !context in there - we'd already checked for audit_dummy_context(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* don't copy_from_user() twice * don't bother with allocations * don't duplicate parts of audit_dummy_context() * make it return void Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* get rid of allocations * make it return void * don't duplicate parts of audit_dummy_context() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* get rid of allocations * make it return void * simplify callers Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* get rid of allocations * make it return void * simplify callers Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* don't bother with allocations * now that it can't fail, make it return void Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
No need to do that more than once per process lifetime; allocating/freeing on each sendto/accept/etc. is bloody pointless. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 1月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
-