Pull XFS fixes from Darrick Wong:
 "Largely debugging and regression fixes.

   - Add some locking assertions for the _ilock helpers.

   - Revert the XFS_QMOPT_NOLOCK patch; after discussion with hch the
     online fsck patch that would have needed it has been redesigned and
     no longer needs it.

   - Fix behavioral regression of SEEK_HOLE/DATA with negative offsets
     to match 4.12-era XFS behavior"

* tag 'xfs-4.13-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: in iomap seek_{hole,data}, return -ENXIO for negative offsets
  Revert "xfs: grab dquots without taking the ilock"
  xfs: assert locking precondition in xfs_readlink_bmap_ilocked
  xfs: assert locking precondіtion in xfs_attr_list_int_ilocked
  xfs: fixup xfs_attr_get_ilocked

Pull btrfs fixes from David Sterba:
 "We've identified and fixed a silent corruption (introduced by code in
  the first pull), a fixup after the blk_status_t merge and two fixes to
  incremental send that Filipe has been hunting for some time"

* 'for-4.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix unexpected return value of bio_readpage_error
  btrfs: btrfs_create_repair_bio never fails, skip error handling
  btrfs: cloned bios must not be iterated by bio_for_each_segment_all
  Btrfs: fix write corruption due to bio cloning on raid5/6
  Btrfs: incremental send, fix invalid memory access
  Btrfs: incremental send, fix invalid path for link commands

Pull a few more input updates from Dmitry Torokhov:

 - multi-touch handling for Xen

 - fix for long-standing bug causing crashes in i8042 on boot

 - change to gpio_keys to better handle key presses during system state
   transition

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix crash at boot time
  Input: gpio_keys - handle the missing key press event in resume phase
  Input: xen-kbdfront - add multi-touch support

Pull crypto fixes from Herbert Xu:

 - fix new compiler warnings in cavium

 - set post-op IV properly in caam (this fixes chaining)

 - fix potential use-after-free in atmel in case of EBUSY

 - fix sleeping in softirq path in chcr

 - disable buggy sha1-avx2 driver (may overread and page fault)

 - fix use-after-free on signals in caam

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: cavium - make several functions static
  crypto: chcr - Avoid algo allocation in softirq.
  crypto: caam - properly set IV after {en,de}crypt
  crypto: atmel - only treat EBUSY as transient if backlog
  crypto: af_alg - Avoid sock_graft call warning
  crypto: caam - fix signals handling
  crypto: sha1-ssse3 - Disable avx2

Pull device properties framework fix from Rafael Wysocki:
 "This fixes a problem with bool properties that could be seen as "true"
  when the property was not present at all by adding a special helper
  for bool properties with checks for all of the requisute conditions
  (Sakari Ailus)"

* tag 'devprop-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Introduce fwnode_call_bool_op() for ops that return bool

Pull ACPI fixes from Rafael Wysocki:
 "These fix the return value of an IRQ mapping routine in the ACPI core,
  fix an EC driver issue causing abnormal fan behavior after system
  resume on some systems and add quirks for ACPI device objects that
  need to be treated as "always present" to work around bogus
  implementations of the _STA control method.

  Specifics:

   - Fix the return value of acpi_gsi_to_irq() to make the GSI to IRQ
     mapping work on the Mustang (ARM64) platform (Mark Salter).

   - Fix an EC driver issue that causes fans to behave abnormally after
     system resume on some systems which turns out to be related to
     switching over the EC into the polling mode during the noirq stages
     of system suspend and resume (Lv Zheng).

   - Add quirks for ACPI device objects that need to be treated as
     "always present", because their _STA methods are designed to work
     around Windows driver bugs and return garbage from our perspective
     (Hans de Goede)"

* tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array
  ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids
  ACPI / x86: Allow matching always_present_id array entries by DMI
  Revert "ACPI / EC: Enable event freeze mode..." to fix a regression
  ACPI / EC: Drop EC noirq hooks to fix a regression
  ACPI / irq: Fix return code of acpi_gsi_to_irq()

Pull power management fixes from Rafael Wysocki:
 "These fix a recently exposed issue in the PCI device wakeup code and
  one older problem related to PCI device wakeup that has been reported
  recently, modify one more piece of computations in intel_pstate to get
  rid of a rounding error, fix a possible race in the schedutil cpufreq
  governor, fix the device PM QoS sysfs interface to correctly handle
  invalid user input, fix return values of two probe routines in devfreq
  drivers and constify an attribute_group structure in devfreq.

  Specifics:

   - Avoid clearing the PCI PME Enable bit for devices as a result of
     config space restoration which confuses AML executed afterward and
     causes wakeup events to be lost on some systems (Rafael Wysocki).

   - Fix the native PCIe PME interrupts handling in the cases when the
     PME IRQ is set up as a system wakeup one so that runtime PM remote
     wakeup works as expected after system resume on systems where that
     happens (Rafael Wysocki).

   - Fix the device PM QoS sysfs interface to handle invalid user input
     correctly instead of using an unititialized variable value as the
     latency tolerance for the device at hand (Dan Carpenter).

   - Get rid of one more rounding error from intel_pstate computations
     (Srinivas Pandruvada).

   - Fix the schedutil cpufreq governor to prevent it from possibly
     accessing unititialized data structures from governor callbacks in
     some cases on systems when multiple CPUs share a single cpufreq
     policy object (Vikram Mulukutla).

   - Fix the return values of probe routines in two devfreq drivers
     (Gustavo Silva).

   - Constify an attribute_group structure in devfreq (Arvind Yadav)"

* tag 'pm-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI / PM: Fix native PME handling during system suspend/resume
  PCI / PM: Restore PME Enable after config space restoration
  cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race
  PM / QoS: return -EINVAL for bogus strings
  cpufreq: intel_pstate: Fix ratio setting for min_perf_pct
  PM / devfreq: constify attribute_group structures.
  PM / devfreq: tegra: fix error return code in tegra_devfreq_probe()
  PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()

Merge even more updates from Andrew Morton:

 - a few leftovers

 - fault-injector rework

 - add a module loader test driver

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kmod: throttle kmod thread limit
  kmod: add test driver to stress test the module loader
  MAINTAINERS: give kmod some maintainer love
  xtensa: use generic fb.h
  fault-inject: add /proc/<pid>/fail-nth
  fault-inject: simplify access check for fail-nth
  fault-inject: make fail-nth read/write interface symmetric
  fault-inject: parse as natural 1-based value for fail-nth write interface
  fault-inject: automatically detect the number base for fail-nth write interface
  kernel/watchdog.c: use better pr_fmt prefix
  MAINTAINERS: move the befs tree to kernel.org
  lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
  mm: fix overflow check in expand_upwards()

Using strscpy was wrong because FORTIFY_SOURCE is passing the maximum
possible size of the outermost object, but strscpy defines the count
parameter as the exact buffer size, so this could copy past the end of
the source.  This would still be wrong with the planned usage of
__builtin_object_size(p, 1) for intra-object overflow checks since it's
the maximum possible size of the specified object with no guarantee of
it being that large.

Reuse of the fortified functions like this currently makes the runtime
error reporting less precise but that can be improved later on.

Noticed by Dave Jones and KASAN.
Signed-off-by: NDaniel Micay <danielmicay@gmail.com>
Acked-by: NKees Cook <keescook@chromium.org>
Reported-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull arch/tile updates from Chris Metcalf:
 "This adds support for an <arch/intreg.h> to help with removing
  __need_xxx #defines from glibc, and removes some dead code in
  arch/tile/mm/init.c"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  mm, tile: drop arch_{add,remove}_memory
  tile: prefer <arch/intreg.h> to __need_int_reg_t

Pull powerpc fixes from Michael Ellerman:
 "Nothing that really stands out, just a bunch of fixes that have come
  in in the last couple of weeks.

  None of these are actually fixes for code that is new in 4.13. It's
  roughly half older bugs, with fixes going to stable, and half
  fixes/updates for Power9.

  Thanks to: Aneesh Kumar K.V, Anton Blanchard, Balbir Singh, Benjamin
  Herrenschmidt, Madhavan Srinivasan, Michael Neuling, Nicholas Piggin,
  Oliver O'Halloran"

* tag 'powerpc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Fix atomic64_inc_not_zero() to return an int
  powerpc: Fix emulation of mfocrf in emulate_step()
  powerpc: Fix emulation of mcrf in emulate_step()
  powerpc/perf: Add POWER9 alternate PM_RUN_CYC and PM_RUN_INST_CMPL events
  powerpc/perf: Fix SDAR_MODE value for continous sampling on Power9
  powerpc/asm: Mark cr0 as clobbered in mftb()
  powerpc/powernv: Fix local TLB flush for boot and MCE on POWER9
  powerpc/mm/radix: Synchronize updates to the process table
  powerpc/mm/radix: Properly clear process table entry
  powerpc/powernv: Tell OPAL about our MMU mode on POWER9
  powerpc/kexec: Fix radix to hash kexec due to IAMR/AMOR

If we reach the limit of modprobe_limit threads running the next
request_module() call will fail.  The original reason for adding a kill
was to do away with possible issues with in old circumstances which would
create a recursive series of request_module() calls.

We can do better than just be super aggressive and reject calls once we've
reached the limit by simply making pending callers wait until the
threshold has been reduced, and then throttling them in, one by one.

This throttling enables requests over the kmod concurrent limit to be
processed once a pending request completes.  Only the first item queued up
to wait is woken up.  The assumption here is once a task is woken it will
have no other option to also kick the queue to check if there are more
pending tasks -- regardless of whether or not it was successful.

By throttling and processing only max kmod concurrent tasks we ensure we
avoid unexpected fatal request_module() calls, and we keep memory
consumption on module loading to a minimum.

With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run
time to run both tests:

time ./kmod.sh -t 0008
real    0m16.366s
user    0m0.883s
sys     0m8.916s

time ./kmod.sh -t 0009
real    0m50.803s
user    0m0.791s
sys     0m9.852s

Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: NPetr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds a new stress test driver for kmod: the kernel module loader.
The new stress test driver, test_kmod, is only enabled as a module right
now.  It should be possible to load this as built-in and load tests
early (refer to the force_init_test module parameter), however since a
lot of test can get a system out of memory fast we leave this disabled
for now.

Using a system with 1024 MiB of RAM can *easily* get your kernel OOM
fast with this test driver.

The test_kmod driver exposes API knobs for us to fine tune simple
request_module() and get_fs_type() calls.  Since these API calls only
allow each one parameter a test driver for these is rather simple.
Other factors that can help out test driver though are the number of
calls we issue and knowing current limitations of each.  This exposes
configuration as much as possible through userspace to be able to build
tests directly from userspace.

Since it allows multiple misc devices its will eventually (once we add a
knob to let us create new devices at will) also be possible to perform
more tests in parallel, provided you have enough memory.

We only enable tests we know work as of right now.

Demo screenshots:

 # tools/testing/selftests/kmod/kmod.sh
kmod_test_0001_driver: OK! - loading kmod test
kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0001_fs: OK! - loading kmod test
kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
kmod_test_0002_driver: OK! - loading kmod test
kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0002_fs: OK! - loading kmod test
kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
kmod_test_0003: OK! - loading kmod test
kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0004: OK! - loading kmod test
kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0005: OK! - loading kmod test
kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0006: OK! - loading kmod test
kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0005: OK! - loading kmod test
kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0006: OK! - loading kmod test
kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS
XXX: add test restult for 0007
Test completed

You can also request for specific tests:

 # tools/testing/selftests/kmod/kmod.sh -t 0001
kmod_test_0001_driver: OK! - loading kmod test
kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0001_fs: OK! - loading kmod test
kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
Test completed

Lastly, the current available number of tests:

 # tools/testing/selftests/kmod/kmod.sh --help
Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ]
Valid tests: 0001-0009

0001 - Simple test - 1 thread  for empty string
0002 - Simple test - 1 thread  for modules/filesystems that do not exist
0003 - Simple test - 1 thread  for get_fs_type() only
0004 - Simple test - 2 threads for get_fs_type() only
0005 - multithreaded tests with default setup - request_module() only
0006 - multithreaded tests with default setup - get_fs_type() only
0007 - multithreaded tests with default setup test request_module() and get_fs_type()
0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module()
0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()

The following test cases currently fail, as such they are not currently
enabled by default:

 # tools/testing/selftests/kmod/kmod.sh -t 0008
 # tools/testing/selftests/kmod/kmod.sh -t 0009

To be sure to run them as intended please unload both of the modules:

  o test_module
  o xfs

And ensure they are not loaded on your system prior to testing them.  If
you use these paritions for your rootfs you can change the default test
driver used for get_fs_type() by exporting it into your environment.  For
example of other test defaults you can override refer to kmod.sh
allow_user_defaults().

Behind the scenes this is how we fine tune at a test case prior to
hitting a trigger to run it:

cat /sys/devices/virtual/misc/test_kmod0/config
echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case
echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs
echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads
cat /sys/devices/virtual/misc/test_kmod0/config
echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads

Finally to trigger:

echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config

The kmod.sh script uses the above constructs to build different test cases.

A bit of interpretation of the current failures follows, first two
premises:

a) When request_module() is used userspace figures out an optimized
   version of module order for us.  Once it finds the modules it needs, as
   per depmod symbol dep map, it will finit_module() the respective
   modules which are needed for the original request_module() request.

b) We have an optimization in place whereby if a kernel uses
   request_module() on a module already loaded we never bother userspace
   as the module already is loaded.  This is all handled by kernel/kmod.c.

A few things to consider to help identify root causes of issues:

0) kmod 19 has a broken heuristic for modules being assumed to be
   built-in to your kernel and will return 0 even though request_module()
   failed.  Upgrade to a newer version of kmod.

1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs",
   not for "xfs".  The optimization in kernel described in b) fails to
   catch if we have a lot of consecutive get_fs_type() calls.  The reason
   is the optimization in place does not look for aliases.  This means two
   consecutive get_fs_type() calls will bump kmod_concurrent, whereas
   request_module() will not.

This one explanation why test case 0009 fails at least once for
get_fs_type().

2) If a module fails to load --- for whatever reason (kmod_concurrent
   limit reached, file not yet present due to rootfs switch, out of
   memory) we have a period of time during which module request for the
   same name either with request_module() or get_fs_type() will *also*
   fail to load even if the file for the module is ready.

This explains why *multiple* NULLs are possible on test 0009.

3) finit_module() consumes quite a bit of memory.

4) Filesystems typically also have more dependent modules than other
   modules, its important to note though that even though a get_fs_type()
   call does not incur additional kmod_concurrent bumps, since userspace
   loads dependencies it finds it needs via finit_module_fd(), it *will*
   take much more memory to load a module with a lot of dependencies.

Because of 3) and 4) we will easily run into out of memory failures with
certain tests.  For instance test 0006 fails on qemu with 1024 MiB of RAM.
It panics a box after reaping all userspace processes and still not
having enough memory to reap.

[arnd@arndb.de: add dependencies for test module]
  Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As suggested by Jessica, I've been actively working on kmod, so might as
well reflect its maintained status.

Changes are expected to go through akpm's tree.

Link: http://lkml.kernel.org/r/20170628223155.26472-2-mcgrof@kernel.orgSigned-off-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Suggested-by: NJessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arch uses a verbatim copy of the asm-generic version and does not
add any own implementations to the header, so use asm-generic/fb.h
instead of duplicating code.

Link: http://lkml.kernel.org/r/20170517083545.2115-1-tklauser@distanz.chSigned-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fail-nth interface is only created in /proc/self/task/<current-tid>/.
This change also adds it in /proc/<pid>/.

This makes shell based tool a bit simpler.

	$ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /"

Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fail-nth file is created with 0666 and the access is permitted if
and only if the task is current.

This file is owned by the currnet user.  So we can create it with 0644
and allow the owner to write it.  This enables to watch the status of
task->fail_nth from another processes.

[akinobu.mita@gmail.com: don't convert unsigned type value as signed int]
  Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com
[akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth]
  Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com
Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The read interface for fail-nth looks a bit odd.  Read from this file
returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this
file).  Because there is no EOF condition.  The first character
indicates current->fail_nth is zero or not, and then current->fail_nth
is reset to zero.

Just returning task->fail_nth value is more natural to understand.

Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The value written to fail-nth file is parsed as 0-based.  Parsing as
one-based is more natural to understand and it enables to cancel the
previous setup by simply writing '0'.

This change also converts task->fail_nth from signed to unsigned int.

Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Automatically detect the number base to use when writing to fail-nth
file instead of always parsing as a decimal number.

Link: http://lkml.kernel.org/r/1491490561-10485-2-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After commit 73ce0511 ("kernel/watchdog.c: move hardlockup
detector to separate file"), 'NMI watchdog' is inappropriate in
kernel/watchdog.c, using 'watchdog' only.

Link: http://lkml.kernel.org/r/1499928642-48983-1-git-send-email-wangkefeng.wang@huawei.comSigned-off-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Cc: Babu Moger <babu.moger@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the location of the befs git tree and my email address.

Link: http://lkml.kernel.org/r/20170709110012.2991-1-luisbg@kernel.orgSigned-off-by: NLuis de Bethencourt <luisbg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

atomic64_inc_not_zero() returns a "truth value" which in C is
traditionally an int.  That means callers are likely to expect the
result will fit in an int.

If an implementation returns a "true" value which does not fit in an
int, then there's a possibility that callers will truncate it when they
store it in an int.

In fact this happened in practice, see commit 966d2b04
("percpu-refcount: fix reference leak during percpu-atomic transition").

So add a test that the result fits in an int, even when the input
doesn't.  This catches the case where an implementation just passes the
non-zero input value out as the result.

Link: http://lkml.kernel.org/r/1499775133-1231-1-git-send-email-mpe@ellerman.id.auSigned-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Douglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jörn Engel noticed that the expand_upwards() function might not return
-ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and
if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE.

Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa
which all define TASK_SIZE as 0xffffffff, but since none of those have
an upwards-growing stack we currently have no actual issue.

Nevertheless let's fix this just in case any of the architectures with
an upward-growing stack (currently parisc, metag and partly ia64) define
TASK_SIZE similar.

Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box
Fixes: bd726c90 ("Allow stack to grow up to address space limit")
Signed-off-by: NHelge Deller <deller@gmx.de>
Reported-by: NJörn Engel <joern@purestorage.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NTB updates from Jon Mason:
 "The major change in the series is a rework of the NTB infrastructure
  to all for IDT hardware to be supported (and resulting fallout from
  that). There are also a few clean-ups, etc.

  New IDT NTB driver and changes to the NTB infrastructure to allow for
  this different kind of NTB HW, some style fixes (per Greg KH
  recommendation), and some ntb_test tweaks"

* tag 'ntb-4.13' of git://github.com/jonmason/ntb:
  ntb_netdev: set the net_device's parent
  ntb: Add error path/handling to Debug FS entry creation
  ntb: Add more debugfs support for ntb_perf testing options
  ntb: Remove debug-fs variables from the context structure
  ntb: Add a module option to control affinity of DMA channels
  NTB: Add IDT 89HPESxNTx PCIe-switches support
  ntb_hw_intel: Style fixes: open code macros that just obfuscate code
  ntb_hw_amd: Style fixes: open code macros that just obfuscate code
  NTB: Add ntb.h comments
  NTB: Add PCIe Gen4 link speed
  NTB: Add new Memory Windows API documentation
  NTB: Add Messaging NTB API
  NTB: Alter Scratchpads API to support multi-ports devices
  NTB: Alter MW API to support multi-ports devices
  NTB: Alter link-state API to support multi-port devices
  NTB: Add indexed ports NTB API
  NTB: Make link-state API being declared first
  NTB: ntb_test: add parameter for doorbell bitmask
  NTB: ntb_test: modprobe on remote host

Pull thermal management updates from Zhang Rui:

 - Improve thermal cpu_cooling interaction with cpufreq core.

   The cpu_cooling driver is designed to use CPU frequency scaling to
   avoid high thermal states for a platform. But it wasn't glued really
   well with cpufreq core.

   For example clipped-cpus is copied from the policy structure and its
   much better to use the policy->cpus (or related_cpus) fields directly
   as they may have got updated. Not that things were broken before this
   series, but they can be optimized a bit more.

   This series tries to improve interactions between cpufreq core and
   cpu_cooling driver and does some fixes/cleanups to the cpu_cooling
   driver. (Viresh Kumar)

 - A couple of fixes and cleanups in thermal core and imx, hisilicon,
   bcm_2835, int340x thermal drivers. (Arvind Yadav, Dan Carpenter,
   Sumeet Pawnikar, Srinivas Pandruvada, Willy WOLFF)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
  thermal: bcm2835: fix an error code in probe()
  thermal: hisilicon: Handle return value of clk_prepare_enable
  thermal: imx: Handle return value of clk_prepare_enable
  thermal: int340x: check for sensor when PTYP is missing
  Thermal/int340x: Fix few typos and kernel-doc style
  thermal: fix source code documentation for parameters
  thermal: cpu_cooling: Replace kmalloc with kmalloc_array
  thermal: cpu_cooling: Rearrange struct cpufreq_cooling_device
  thermal: cpu_cooling: 'freq' can't be zero in cpufreq_state2power()
  thermal: cpu_cooling: don't store cpu_dev in cpufreq_cdev
  thermal: cpu_cooling: get_level() can't fail
  thermal: cpu_cooling: create structure for idle time stats
  thermal: cpu_cooling: merge frequency and power tables
  thermal: cpu_cooling: get rid of 'allowed_cpus'
  thermal: cpu_cooling: OPPs are registered for all CPUs
  thermal: cpu_cooling: store cpufreq policy
  cpufreq: create cpufreq_table_count_valid_entries()
  thermal: cpu_cooling: use cpufreq_policy to register cooling device
  thermal: cpu_cooling: get rid of a variable in cpufreq_set_cur_state()
  thermal: cpu_cooling: remove cpufreq_cooling_get_level()
  ...

Pull MMC fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.13 rc1.

  MMC core:
   - Restore some behaviour of MMC_IOC_MULTI_CMD commands
   - Fix using un-initialized variable in mmc_blk_issue_drv_op()
   - Fix mmc block queue cleanup

  MMC host:
   - sdhci-acpi: Workaround conflict with PCI wifi on GPD Win handheld
   - tmio-mmc: Fix bad pointer math"

* tag 'mmc-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: tmio-mmc: fix bad pointer math
  mmc: block: Prevent new req entering queue after its cleanup
  mmc: block: Let MMC_IOC_MULTI_CMD return zero again for zero entries
  mmc: block: Initialize ret in mmc_blk_issue_drv_op() for MMC_DRV_OP_IOCTL
  mmc: sdhci-acpi: Workaround conflict with PCI wifi on GPD Win handheld

Pull sound fixes from Takashi Iwai:
 "Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
  a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
  and quirks"

* tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add hdmi id for a Geminilake variant
  ALSA: hda/realtek - New codec device ID for ALC1220
  ALSA: pcm: Simplify check for dma_mmap_coherent() availability
  ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMA
  ALSA: msnd: Optimize / harden DSP and MIDI loops
  ALSA: hda/realtek - change the location for one of two front microphones
  ALSA: opl4: Move inline before return type

Pull key handling fixes from James Morris:
 "A minor fix and documentation updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Add documentation for asymmetric keyring restrictions
  KEYS: DH: validate __spare field
  modsign: add markers to endif-statements in certs/Makefile

Pull clk api update from Stephen Boyd:
 "Small patch to add the clk_bulk_prepare_enable() and
  clk_bulk_disable_unprepare() API to the newly introduced
  clk bulk APIs.

  It would be good to get this into the -rc1 so that other
  driver trees can use it for code targeted for the next
  merge window"

* tag 'clk-bulk-get-prep-enable' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Provide bulk prepare_enable disable_unprepare variants

Pull PCI fixes from Bjorn Helgaas:

 - fix a typo that broke Rockchip enumeration

 - fix a new memory leak in the ARM host bridge failure path

* tag 'pci-v4.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: rockchip: Check for pci_scan_root_bus_bridge() failure correctly
  ARM/PCI: Fix pcibios_init_resource() struct pci_host_bridge leak

Pull single befs fix from Luis de Bethencourt:
 "Very little activity in the befs file system this time since I'm busy
  settling into a new job"

* tag 'befs-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/luisbg/linux-befs:
  befs: add kernel-doc formatting for befs_bt_read_super()

With blk_status_t conversion (that are now present in master),
bio_readpage_error() may return 1 as now ->submit_bio_hook() may not set
%ret if it runs without problems.

This fixes that unexpected return value by changing
btrfs_check_repairable() to return a bool instead of updating %ret, and
patch is applicable to both codebases with and without blk_status_t.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As the function uses the non-failing bio allocation, we can remove error
handling from the callers as well.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We've started using cloned bios more in 4.13, there are some specifics
regarding the iteration.  Filipe found [1] that the raid56 iterated a
cloned bio using bio_for_each_segment_all, which is incorrect. The
cloned bios have wrong bi_vcnt and this could lead to silent
corruptions.  This patch adds assertions to all remaining
bio_for_each_segment_all cases.

[1] https://patchwork.kernel.org/patch/9838535/Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

- incremental send fixes
- raid56 corruption fix (cloned bio iteration)

* acpi-ec:
  Revert "ACPI / EC: Enable event freeze mode..." to fix a regression
  ACPI / EC: Drop EC noirq hooks to fix a regression

* acpi-irq:
  ACPI / irq: Fix return code of acpi_gsi_to_irq()

* acpi-quirks:
  ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array
  ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids
  ACPI / x86: Allow matching always_present_id array entries by DMI

* pm-qos:
  PM / QoS: return -EINVAL for bogus strings

* pm-devfreq:
  PM / devfreq: constify attribute_group structures.
  PM / devfreq: tegra: fix error return code in tegra_devfreq_probe()
  PM / devfreq: rk3399_dmc: fix error return code in rk3399_dmcfreq_probe()

* pm-cpufreq-sched:
  cpufreq: schedutil: Fix sugov_start() versus sugov_update_shared() race

* intel_pstate:
  cpufreq: intel_pstate: Fix ratio setting for min_perf_pct

* pm-pci:
  PCI / PM: Fix native PME handling during system suspend/resume
  PCI / PM: Restore PME Enable after config space restoration