It's a known fact that Windows times out commands after 7 seconds, so
drives generally try and respond if they can before that happens.  We
default to 5 seconds, which sometimes is a bit too short.

Jeremy Higdon reported here:

	http://lkml.org/lkml/2007/1/1/145

that his drive takes longer than 5 seconds for a "read track
information" command, later confirming that it is about 6.7 seconds.

So just do the sane thing and change the default command timeout to 7
seconds to avoid other surprises.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/char/agp/sgi-agp.c: check kmalloc() return value
Signed-off-by: NAmit Choudhary <amit2030@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

This is a slight variant on the patch I posted December 16th to fix
libata combined mode handling. The only real change is that we now
correctly also reserve BAR1,2,4. That is basically a neatness issue.

Jeff was unhappy about two things

1. That it didn't work in the case of one channel native one channel
legacy.

This is a silly complaint because the SFF layer in libata doesn't handle
this case yet anyway.

2. The case where combined mode is in use and IDE=n.

In this case the libata quirk code reserves the resources in question
correctly already.

Once the combined mode stuff is redone properly (2.6.21) then the entire
mess turns into a single pci_request_regions() for all cases and all the
ugly resource hackery goes away.

I'm sending this now rather than after running full test suites so that
it can get the maximal testing in a short time. I'll be running tests on
this after lunch.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Acked-by: NAlessandro Suardi <alessandro.suardi@gmail.com>
Acked-by: NTheodore Tso <tytso@mit.edu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to pass in the resource otherwise we cannot
release the region properly.  We must know whether it is
an I/O or MEM resource.

Spotted by Eric Brower.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix an GFP_KERNEL allocation in atomic section: kvm_dev_ioctl_create_vcpu()
called kvm_mmu_init(), which calls alloc_pages(), while holding the vcpu.

The fix is to set up the MMU state in two phases: kvm_mmu_create() and
kvm_mmu_setup().

(NOTE: free_vcpus does an kvm_mmu_destroy() call so there's no need for any
extra teardown branch on allocation/init failure here.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__free_page() doesn't like a NULL argument, so check before calling it.  A
NULL can only happen if memory is exhausted during allocation of a memory
slot.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

No need to append _MSR to msr names, a prefix should suffice.
Signed-off-by: NNguyen Anh Quynh <aquynh@gmail.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These msrs are referenced by benchmarking software when pretending to be an
Intel cpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Resolves sourceforge bug 1622229 (guest crashes running benchmark software).
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The latest version of kvm doesn't initialize kvm_arch_ops in kvm_init(), which
causes an error with the following sequence.

1. Load the supported arch's module.
2. Load the unsupported arch's module.$B!!(B(loading error)
3. Unload the unsupported arch's module.

You'll get the following error message after step 3.  "BUG: unable to handle
to handle kernel paging request at virtual address xxxxxxxx"

The problem here is that the unsupported arch's module overwrites kvm_arch_ops
of the supported arch's module at step 2.

This patch initializes kvm_arch_ops upon loading architecture specific kvm
module, and prevents overwriting kvm_arch_ops when kvm_arch_ops is already set
correctly.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Instead of doing tricky stuff with the arch dependent virtualization
registers, take a peek at the guest's efer.

This simlifies some code, and fixes some confusion in the mmu branch.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

current_cpu_data invokes smp_processor_id(), which is inadvisable when
preemption is enabled.  Switch to boot_cpu_data instead.

Resolves sourceforge bug 1621401.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The fallback to PIO mode in the hwif->dma_check() handler doesn't work in
the Intel PIIX and SMsC SLC90E66 IDE drivers because:

- config_drive_for_dma() calls the hwif->speedproc() handler with a wrong
  mode number (unbiased by XFER_PIO_0) in case of the PIO fallback;

- hwif->tuneproc() handler doesn't really set the drive's own speed (this
  is not fixed as yet).
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no need to check in piix_config_drive_for_dma() for broken MW DMA
mode 0 as this mode is not supported by the driver (it sets
hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed().

(Alan sayeth "Probably right but if not you've got a subtle corruptor.  Should
at least stick a BUG_ON mode 0 setting right close when the mode is set.")
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Russel King recently reminded us that one shouldn't use asm/arch/hardware.h
but one should use asm/hardware.h.  Unfortunately, the spi_s3c24xx_gpio
driver is using the wrong header.  This patch is fixing that.
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Return a fault code if the Dataflash driver runs into a "no device present"
error when the MISO line has a pulldown (it currently expects a pullup), so
that rmmod won't oops.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix build issues that show up with the m25p80 SPI flash driver when
building with MTD debug enabled.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some issues were recently turned up with the current specification of what
it means for spi_transfer.tx_buf to be null, as part of transfers which are
(from the SPI protocol driver perspective) pure reads.

Specifically, that it seems better to change the TX behaviour there from
"undefined" to "will shift zeroes".  This lets protocol drivers (like the
ads7846 driver) depend on that behavior.  It's what most controller drivers
in the tree are already doing (with one exception and one case of driver
wanting-to-oops), it's what Microwire hardware will necessarily be doing,
and it removes an issue whereby certain security audits would need to
define such a value anyway as part of removing covert channels.

This patch changes the specification to require shifting zeroes, and
updates all currently merged SPI controller drivers to do so.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the
CONFIG_PROC_FS block.

drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndreas Schwab <schwab@suse.de>
Cc: "Yu, Luming" <luming.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Many spinlock recursion was in the isicom driver.  Eliminate it.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The apple fn keys don't work anymore with 2.6.20-rc1.

The reason is that USB_HID_POWERBOOK appears in several files although
USB_HIDINPUT_POWERBOOK is the thing to be used.

The patch fixes this.

Cc: Greg KH <greg@kroah.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit bed8bdfd ("IB: kmemdup() cleanup") introduced one bad conversion to
kmemdup() in mthca_alloc_fmr(), where the structure allocated and the
structure copied are not the same size.  Revert this back to the original
kmalloc()/memcpy() code.

Reported-by: Dotan Barak <dotanb@mellanox.co.il>.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@digitalvampire.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

tty_driver->owner is not set, so if somebody remove mxser_module, it might
oops (and doesn't tell the user: no way, it's in use). Set the .owner value.

Cc: <osv@javad.com>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't have macros between a function's kernel-doc block and the function
definition.  This is not valid for kernel-doc.

Warning(/var/linsrc/linux-2.6.20-rc1-git8//drivers/pci/probe.c:653): No description found for parameter 'IORESOURCE_PCI_FIXED'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Choose rpa_vscsi.c over iseries_vscsi.c when building both pseries and
iseries.  This fixes a link error.
Signed-off-by: NJudith Lebzelter <judith@osdl.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

set_param_str() cannot use kstrdup() to duplicate the parameter.  That's
fine when the driver is compiled as a module but it sure is not when built
into the kernel as the kernel parameters are parsed before the kmalloc
slabs are setup.
Signed-off-by: NSebastien Dugué <sebastien.dugue@bull.net>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Need to use a PCI device, not a FireWire host device.  Problem found by
Andreas Schwab, mistake pointed out by Benjamin Herrenschmidt.
http://ozlabs.org/pipermail/linuxppc-dev/2006-December/029595.htmlSigned-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: NAndreas Schwab <schwab@suse.de>

Delete some incorrect code, left over from the initial driver submission
in March 2001.

SBP-2 targets should provide sense data via the SBP-2 status block
(autosense).  We have to pass the REQUEST_SENSE command through to
targets which don't implement autosense, if there are any, and to
accomodate application clients which use this command.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>

Unfortunately there was a typo in one of the patches I sent,
(The one now committed to the agpgart tree).
It may cause a bus error on i810 type hardware.
Signed-off-by: NThomas Hellstrom <thomas@tungstengraphics.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Copy inline assembly of stsch and add "memory" to clobber list in order
to prevent gcc from optimizing away the checking of the global variable
"pgm_check_occured".
Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Reduce the max. buffer size for the monwriter device to prevent a
possible problem with the z/VM monitor service.
Signed-off-by: NMelissa Howland <melissah@us.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

reference to .init.text: from .text between 'cx88_card_setup'
(at offset 0x68c) and 'cx88_risc_field'
Caused by leadtek_eeprom() being declared __devinit and called from
a non-devinit context.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

include/media/ir-common.h:78: error: field 'work' has incomplete type
drivers/media/common/ir-functions.c: In function 'ir_rc5_timer_end':
drivers/media/common/ir-functions.c:301: error: 'jiffies' undeclared (first use in this function)
drivers/media/common/ir-functions.c:301: error: (Each undeclared identifier is reported only once)
drivers/media/common/ir-functions.c:301: error: for each function it appears in.)
drivers/media/common/ir-functions.c:347: error: 'HZ' undeclared (first use in this function)
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- CAFE_CCIC needs to depend on PCI, else "allyesconfig" breaks
   on systems without PCI
- em28xx-video can't udelay(2500) else "allyesconfig" breaks
   on systems that refuse to spin that long (I saw it on ARM)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

ioremap() is called twice to same resource.
The returen value of first one is not error-checked.
second one is complely ignored.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The return value of kthread_run() should be checked by IS_ERR().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The return value of kthread_run() should be checked by IS_ERR().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>