Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and
ext4_begin_ordered_truncate()
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Unfortunately perf can't deal with anything other than direct structure
accesses in the TP_printk() section.  It will drop dead when it sees
jbd2_dev_to_name() in the "print fmt" section of the tracepoint.

Addresses-Google-Bug: 3138508
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Many tracepoints were populating an ext4_allocation_context
to pass in, but this requires a slab allocation even when
tracepoints are off.  In fact, 4 of 5 of these allocations
were only for tracing.  In addition, we were only using a
small fraction of the 144 bytes of this structure for this
purpose.

We can do away with all these alloc/frees of the ac and
simply pass in the bits we care about, instead.

I tested this by turning on tracing and running through
xfstests on x86_64.  I did not actually do anything with
the trace output, however.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Our QA reported an oops in the ext4_mb_release_group_pa tracing,
and Josef Bacik pointed out that it was because we may have a
non-null but uninitialized ac_inode in the allocation context.

I can reproduce it when running xfstests with ext4 tracepoints on, 
on a CONFIG_SLAB_DEBUG kernel.

We call trace_ext4_mb_release_group_pa from 2 places, 
ext4_mb_discard_group_preallocations and 
ext4_mb_discard_lg_preallocations

In both cases we allocate an ac as a container just for tracing (!)
and never fill in the ac_inode.  There's no reason to be assigning,
testing, or printing it as far as I can see, so just remove it from
the tracepoint.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ac->inode is set to null in function ext4_mb_release_group_pa(),
and then trace_ext4_mballoc_discard(ac) is called, the kernel
will panic.

BUG: unable to handle kernel NULL pointer dereference at 000000a4
IP: [<f87e1714>] ftrace_raw_event_ext4__mballoc+0x54/0xc0 [ext4]
*pdpt = 0000000000abd001 *pde = 0000000000000000
Oops: 0000 [#1] SMP

Pid: 550, comm: flush-8:16 Not tainted 2.6.36-rc1 #1 SE7320EP2/Altos G530
EIP: 0060:[<f87e1714>] EFLAGS: 00010206 CPU: 1
EIP is at ftrace_raw_event_ext4__mballoc+0x54/0xc0 [ext4]
EAX: f32ac840 EBX: f3f1cf88 ECX: f32ac840 EDX: 00000000
ESI: f32ac83c EDI: f880b9d8 EBP: 00000000 ESP: f4b77ae4
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process flush-8:16 (pid: 550, ti=f4b76000 task=f613e540 task.ti=f4b76000)
Call Trace:
 [<f87f5ac1>] ? ext4_mb_release_group_pa+0x121/0x150 [ext4]
 [<f87f8356>] ? ext4_mb_discard_group_preallocations+0x336/0x400 [ext4]
 [<f87fb7f1>] ? ext4_mb_new_blocks+0x3d1/0x4f0 [ext4]
 [<c05a6c5b>] ? __make_request+0x10b/0x440
 [<f87f1fb4>] ? ext4_ext_map_blocks+0x1334/0x1980 [ext4]
 [<c04ac78a>] ? rb_reserve_next_event+0xaa/0x3b0
 [<f87d18d6>] ? ext4_map_blocks+0xd6/0x1d0 [ext4]
 [<f87d2da7>] ? mpage_da_map_blocks+0xc7/0x8a0 [ext4]
 [<c04c8a68>] ? find_get_pages_tag+0x38/0x110
 [<c04d23a5>] ? __pagevec_release+0x15/0x20
 [<f87d3ca5>] ? ext4_da_writepages+0x2b5/0x5d0 [ext4]
 [<c04cfbe0>] ? __writepage+0x0/0x30
 [<c04d0e34>] ? do_writepages+0x14/0x30
 [<c0526600>] ? writeback_single_inode+0xa0/0x240
 [<c0526971>] ? writeback_sb_inodes+0xc1/0x180
 [<c0526ab8>] ? writeback_inodes_wb+0x88/0x140
 [<c0526d7b>] ? wb_writeback+0x20b/0x320
 [<c045aca7>] ? lock_timer_base+0x27/0x50
 [<c0526fe0>] ? wb_do_writeback+0x150/0x190
 [<c05270a8>] ? bdi_writeback_thread+0x88/0x1f0
 [<c043b680>] ? complete+0x40/0x60
 [<c0527020>] ? bdi_writeback_thread+0x0/0x1f0
 [<c0469474>] ? kthread+0x74/0x80
 [<c0469400>] ? kthread+0x0/0x80
 [<c040a23e>] ? kernel_thread_helper+0x6/0x10
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone

If congestion_wait() is called with no BDI congested, the caller will
sleep for the full timeout and this may be an unnecessary sleep.  This
patch adds a wait_iff_congested() that checks congestion and only sleeps
if a BDI is congested else, it calls cond_resched() to ensure the caller
is not hogging the CPU longer than its quota but otherwise will not sleep.

This is aimed at reducing some of the major desktop stalls reported during
IO.  For example, while kswapd is operating, it calls congestion_wait()
but it could just have been reclaiming clean page cache pages with no
congestion.  Without this patch, it would sleep for a full timeout but
after this patch, it'll just call schedule() if it has been on the CPU too
long.  Similar logic applies to direct reclaimers that are not making
enough progress.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shrink_page_list() can decide to give up reclaiming a page under a
number of conditions such as

  1. trylock_page() failure
  2. page is unevictable
  3. zone reclaim and page is mapped
  4. PageWriteback() is true
  5. page is swapbacked and swap is full
  6. add_to_swap() failure
  7. page is dirty and gfpmask don't have GFP_IO, GFP_FS
  8. page is pinned
  9. IO queue is congested
 10. pageout() start IO, but not finished

With lumpy reclaim, failures result in entering synchronous lumpy reclaim
but this can be unnecessary.  In cases (2), (3), (5), (6), (7) and (8),
there is no point retrying.  This patch causes lumpy reclaim to abort when
it is known it will fail.

Case (9) is more interesting. current behavior is,
  1. start shrink_page_list(async)
  2. found queue_congested()
  3. skip pageout write
  4. still start shrink_page_list(sync)
  5. wait on a lot of pages
  6. again, found queue_congested()
  7. give up pageout write again

So, it's useless time wasting.  However, just skipping page reclaim is
also notgood as x86 allocating a huge page needs 512 pages for example.
It can have more dirty pages than queue congestion threshold (~=128).

After this patch, pageout() behaves as follows;

 - If order > PAGE_ALLOC_COSTLY_ORDER
	Ignore queue congestion always.
 - If order <= PAGE_ALLOC_COSTLY_ORDER
	skip write page and disable lumpy reclaim.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is strong evidence to indicate a lot of time is being spent in
congestion_wait(), some of it unnecessarily.  This patch adds a tracepoint
for congestion_wait to record when congestion_wait() was called, how long
the timeout was for and how long it actually slept.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There have been numerous reports of stalls that pointed at the problem
being somewhere in the VM.  There are multiple roots to the problems which
means dealing with any of the root problems in isolation is tricky to
justify on their own and they would still need integration testing.  This
patch series puts together two different patch sets which in combination
should tackle some of the root causes of latency problems being reported.

Patch 1 adds a tracepoint for shrink_inactive_list.  For this series, the
most important results is being able to calculate the scanning/reclaim
ratio as a measure of the amount of work being done by page reclaim.

Patch 2 accounts for time spent in congestion_wait.

Patches 3-6 were originally developed by Kosaki Motohiro but reworked for
this series.  It has been noted that lumpy reclaim is far too aggressive
and trashes the system somewhat.  As SLUB uses high-order allocations, a
large cost incurred by lumpy reclaim will be noticeable.  It was also
reported during transparent hugepage support testing that lumpy reclaim
was trashing the system and these patches should mitigate that problem
without disabling lumpy reclaim.

Patch 7 adds wait_iff_congested() and replaces some callers of
congestion_wait().  wait_iff_congested() only sleeps if there is a BDI
that is currently congested.  Patch 8 notes that any BDI being congested
is not necessarily a problem because there could be multiple BDIs of
varying speeds and numberous zones.  It attempts to track when a zone
being reclaimed contains many pages backed by a congested BDI and if so,
reclaimers wait on the congestion queue.

I ran a number of tests with monitoring on X86, X86-64 and PPC64. Each
machine had 3G of RAM and the CPUs were

X86:    Intel P4 2-core
X86-64: AMD Phenom 4-core
PPC64:  PPC970MP

Each used a single disk and the onboard IO controller.  Dirty ratio was
left at 20.  I'm just going to report for X86-64 and PPC64 in a vague
attempt to keep this report short.  Four kernels were tested each based on
v2.6.36-rc4

traceonly-v2r2:     Patches 1 and 2 to instrument vmscan reclaims and congestion_wait
lowlumpy-v2r3:      Patches 1-6 to test if lumpy reclaim is better
waitcongest-v2r3:   Patches 1-7 to only wait on congestion
waitwriteback-v2r4: Patches 1-8 to detect when a zone is congested

nocongest-v1r5: Patches 1-3 for testing wait_iff_congestion
nodirect-v1r5:  Patches 1-10 to disable filesystem writeback for better IO

The tests run were as follows

kernbench
	compile-based benchmark. Smoke test performance

sysbench
	OLTP read-only benchmark. Will be re-run in the future as read-write

micro-mapped-file-stream
	This is a micro-benchmark from Johannes Weiner that accesses a
	large sparse-file through mmap(). It was configured to run in only
	single-CPU mode but can be indicative of how well page reclaim
	identifies suitable pages.

stress-highalloc
	Tries to allocate huge pages under heavy load.

kernbench, iozone and sysbench did not report any performance regression
on any machine.  sysbench did pressure the system lightly and there was
reclaim activity but there were no difference of major interest between
the kernels.

X86-64 micro-mapped-file-stream

                                      traceonly-v2r2           lowlumpy-v2r3        waitcongest-v2r3     waitwriteback-v2r4
pgalloc_dma                       1639.00 (   0.00%)       667.00 (-145.73%)      1167.00 ( -40.45%)       578.00 (-183.56%)
pgalloc_dma32                  2842410.00 (   0.00%)   2842626.00 (   0.01%)   2843043.00 (   0.02%)   2843014.00 (   0.02%)
pgalloc_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgsteal_dma                        729.00 (   0.00%)        85.00 (-757.65%)       609.00 ( -19.70%)       125.00 (-483.20%)
pgsteal_dma32                  2338721.00 (   0.00%)   2447354.00 (   4.44%)   2429536.00 (   3.74%)   2436772.00 (   4.02%)
pgsteal_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_kswapd_dma                 1469.00 (   0.00%)       532.00 (-176.13%)      1078.00 ( -36.27%)       220.00 (-567.73%)
pgscan_kswapd_dma32            4597713.00 (   0.00%)   4503597.00 (  -2.09%)   4295673.00 (  -7.03%)   3891686.00 ( -18.14%)
pgscan_kswapd_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_direct_dma                   71.00 (   0.00%)       134.00 (  47.01%)       243.00 (  70.78%)       352.00 (  79.83%)
pgscan_direct_dma32             305820.00 (   0.00%)    280204.00 (  -9.14%)    600518.00 (  49.07%)    957485.00 (  68.06%)
pgscan_direct_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pageoutrun                       16296.00 (   0.00%)     21254.00 (  23.33%)     18447.00 (  11.66%)     20067.00 (  18.79%)
allocstall                         443.00 (   0.00%)       273.00 ( -62.27%)       513.00 (  13.65%)      1568.00 (  71.75%)

These are based on the raw figures taken from /proc/vmstat.  It's a rough
measure of reclaim activity.  Note that allocstall counts are higher
because we are entering direct reclaim more often as a result of not
sleeping in congestion.  In itself, it's not necessarily a bad thing.
It's easier to get a view of what happened from the vmscan tracepoint
report.

FTrace Reclaim Statistics: vmscan

                                traceonly-v2r2   lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4
Direct reclaims                                443        273        513       1568
Direct reclaim pages scanned                305968     280402     600825     957933
Direct reclaim pages reclaimed               43503      19005      30327     117191
Direct reclaim write file async I/O              0          0          0          0
Direct reclaim write anon async I/O              0          3          4         12
Direct reclaim write file sync I/O               0          0          0          0
Direct reclaim write anon sync I/O               0          0          0          0
Wake kswapd requests                        187649     132338     191695     267701
Kswapd wakeups                                   3          1          4          1
Kswapd pages scanned                       4599269    4454162    4296815    3891906
Kswapd pages reclaimed                     2295947b    2428434    2399818    2319706
Kswapd reclaim write file async I/O              1          0          1          1
Kswapd reclaim write anon async I/O             59        187         41        222
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)         4.34       2.52       6.63       2.96
Time kswapd awake (seconds)                  11.15      10.25      11.01      10.19

Total pages scanned                        4905237   4734564   4897640   4849839
Total pages reclaimed                      2339450   2447439   2430145   2436897
%age total pages scanned/reclaimed          47.69%    51.69%    49.62%    50.25%
%age total pages scanned/written             0.00%     0.00%     0.00%     0.00%
%age  file pages scanned/written             0.00%     0.00%     0.00%     0.00%
Percentage Time Spent Direct Reclaim        29.23%    19.02%    38.48%    20.25%
Percentage Time kswapd Awake                78.58%    78.85%    76.83%    79.86%

What is interesting here for nocongest in particular is that while direct
reclaim scans more pages, the overall number of pages scanned remains the
same and the ratio of pages scanned to pages reclaimed is more or less the
same.  In other words, while we are sleeping less, reclaim is not doing
more work and as direct reclaim and kswapd is awake for less time, it
would appear to be doing less work.

FTrace Reclaim Statistics: congestion_wait
Direct number congest     waited                87        196         64          0
Direct time   congest     waited            4604ms     4732ms     5420ms        0ms
Direct full   congest     waited                72        145         53          0
Direct number conditional waited                 0          0        324       1315
Direct time   conditional waited               0ms        0ms        0ms        0ms
Direct full   conditional waited                 0          0          0          0
KSwapd number congest     waited                20         10         15          7
KSwapd time   congest     waited            1264ms      536ms      884ms      284ms
KSwapd full   congest     waited                10          4          6          2
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0

The vanilla kernel spent 8 seconds asleep in direct reclaim and no time at
all asleep with the patches.

MMTests Statistics: duration
User/Sys Time Running Test (seconds)         10.51     10.73      10.6     11.66
Total Elapsed Time (seconds)                 14.19     13.00     14.33     12.76

Overall, the tests completed faster. It is interesting to note that backing off further
when a zone is congested and not just a BDI was more efficient overall.

PPC64 micro-mapped-file-stream
pgalloc_dma                    3024660.00 (   0.00%)   3027185.00 (   0.08%)   3025845.00 (   0.04%)   3026281.00 (   0.05%)
pgalloc_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgsteal_dma                    2508073.00 (   0.00%)   2565351.00 (   2.23%)   2463577.00 (  -1.81%)   2532263.00 (   0.96%)
pgsteal_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_kswapd_dma              4601307.00 (   0.00%)   4128076.00 ( -11.46%)   3912317.00 ( -17.61%)   3377165.00 ( -36.25%)
pgscan_kswapd_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pgscan_direct_dma               629825.00 (   0.00%)    971622.00 (  35.18%)   1063938.00 (  40.80%)   1711935.00 (  63.21%)
pgscan_direct_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
pageoutrun                       27776.00 (   0.00%)     20458.00 ( -35.77%)     18763.00 ( -48.04%)     18157.00 ( -52.98%)
allocstall                         977.00 (   0.00%)      2751.00 (  64.49%)      2098.00 (  53.43%)      5136.00 (  80.98%)

Similar trends to x86-64. allocstalls are up but it's not necessarily bad.

FTrace Reclaim Statistics: vmscan
Direct reclaims                                977       2709       2098       5136
Direct reclaim pages scanned                629825     963814    1063938    1711935
Direct reclaim pages reclaimed               75550     242538     150904     387647
Direct reclaim write file async I/O              0          0          0          2
Direct reclaim write anon async I/O              0         10          0          4
Direct reclaim write file sync I/O               0          0          0          0
Direct reclaim write anon sync I/O               0          0          0          0
Wake kswapd requests                        392119    1201712     571935     571921
Kswapd wakeups                                   3          2          3          3
Kswapd pages scanned                       4601307    4128076    3912317    3377165
Kswapd pages reclaimed                     2432523    2318797    2312673    2144616
Kswapd reclaim write file async I/O             20          1          1          1
Kswapd reclaim write anon async I/O             57        132         11        121
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)         6.19       7.30      13.04      10.88
Time kswapd awake (seconds)                  21.73      26.51      25.55      23.90

Total pages scanned                        5231132   5091890   4976255   5089100
Total pages reclaimed                      2508073   2561335   2463577   2532263
%age total pages scanned/reclaimed          47.95%    50.30%    49.51%    49.76%
%age total pages scanned/written             0.00%     0.00%     0.00%     0.00%
%age  file pages scanned/written             0.00%     0.00%     0.00%     0.00%
Percentage Time Spent Direct Reclaim        18.89%    20.65%    32.65%    27.65%
Percentage Time kswapd Awake                72.39%    80.68%    78.21%    77.40%

Again, a similar trend that the congestion_wait changes mean that direct
reclaim scans more pages but the overall number of pages scanned while
slightly reduced, are very similar.  The ratio of scanning/reclaimed
remains roughly similar.  The downside is that kswapd and direct reclaim
was awake longer and for a larger percentage of the overall workload.
It's possible there were big differences in the amount of time spent
reclaiming slab pages between the different kernels which is plausible
considering that the micro tests runs after fsmark and sysbench.

Trace Reclaim Statistics: congestion_wait
Direct number congest     waited               845       1312        104          0
Direct time   congest     waited           19416ms    26560ms     7544ms        0ms
Direct full   congest     waited               745       1105         72          0
Direct number conditional waited                 0          0       1322       2935
Direct time   conditional waited               0ms        0ms       12ms      312ms
Direct full   conditional waited                 0          0          0          3
KSwapd number congest     waited                39        102         75         63
KSwapd time   congest     waited            2484ms     6760ms     5756ms     3716ms
KSwapd full   congest     waited                20         48         46         25
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0

The vanilla kernel spent 20 seconds asleep in direct reclaim and only
312ms asleep with the patches.  The time kswapd spent congest waited was
also reduced by a large factor.

MMTests Statistics: duration
ser/Sys Time Running Test (seconds)         26.58     28.05      26.9     28.47
Total Elapsed Time (seconds)                 30.02     32.86     32.67     30.88

With all patches applies, the completion times are very similar.

X86-64 STRESS-HIGHALLOC
                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Pass 1          82.00 ( 0.00%)    84.00 ( 2.00%)    85.00 ( 3.00%)    85.00 ( 3.00%)
Pass 2          90.00 ( 0.00%)    87.00 (-3.00%)    88.00 (-2.00%)    89.00 (-1.00%)
At Rest         92.00 ( 0.00%)    90.00 (-2.00%)    90.00 (-2.00%)    91.00 (-1.00%)

Success figures across the board are broadly similar.

                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Direct reclaims                               1045        944        886        887
Direct reclaim pages scanned                135091     119604     109382     101019
Direct reclaim pages reclaimed               88599      47535      47863      46671
Direct reclaim write file async I/O            494        283        465        280
Direct reclaim write anon async I/O          29357      13710      16656      13462
Direct reclaim write file sync I/O             154          2          2          3
Direct reclaim write anon sync I/O           14594        571        509        561
Wake kswapd requests                          7491        933        872        892
Kswapd wakeups                                 814        778        731        780
Kswapd pages scanned                       7290822   15341158   11916436   13703442
Kswapd pages reclaimed                     3587336    3142496    3094392    3187151
Kswapd reclaim write file async I/O          91975      32317      28022      29628
Kswapd reclaim write anon async I/O        1992022     789307     829745     849769
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)      4588.93    2467.16    2495.41    2547.07
Time kswapd awake (seconds)                2497.66    1020.16    1098.06    1176.82

Total pages scanned                        7425913  15460762  12025818  13804461
Total pages reclaimed                      3675935   3190031   3142255   3233822
%age total pages scanned/reclaimed          49.50%    20.63%    26.13%    23.43%
%age total pages scanned/written            28.66%     5.41%     7.28%     6.47%
%age  file pages scanned/written             1.25%     0.21%     0.24%     0.22%
Percentage Time Spent Direct Reclaim        57.33%    42.15%    42.41%    42.99%
Percentage Time kswapd Awake                43.56%    27.87%    29.76%    31.25%

Scanned/reclaimed ratios again look good with big improvements in
efficiency.  The Scanned/written ratios also look much improved.  With a
better scanned/written ration, there is an expectation that IO would be
more efficient and indeed, the time spent in direct reclaim is much
reduced by the full series and kswapd spends a little less time awake.

Overall, indications here are that allocations were happening much faster
and this can be seen with a graph of the latency figures as the
allocations were taking place
http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-hydra-mean.ps

FTrace Reclaim Statistics: congestion_wait
Direct number congest     waited              1333        204        169          4
Direct time   congest     waited           78896ms     8288ms     7260ms      200ms
Direct full   congest     waited               756         92         69          2
Direct number conditional waited                 0          0         26        186
Direct time   conditional waited               0ms        0ms        0ms     2504ms
Direct full   conditional waited                 0          0          0         25
KSwapd number congest     waited                 4        395        227        282
KSwapd time   congest     waited             384ms    25136ms    10508ms    18380ms
KSwapd full   congest     waited                 3        232         98        176
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0
KSwapd full   conditional waited               318          0        312          9

Overall, the time spent speeping is reduced.  kswapd is still hitting
congestion_wait() but that is because there are callers remaining where it
wasn't clear in advance if they should be changed to wait_iff_congested()
or not.  Overall the sleep imes are reduced though - from 79ish seconds to
about 19.

MMTests Statistics: duration
User/Sys Time Running Test (seconds)       3415.43   3386.65   3388.39    3377.5
Total Elapsed Time (seconds)               5733.48   3660.33   3689.41   3765.39

With the full series, the time to complete the tests are reduced by 30%

PPC64 STRESS-HIGHALLOC
                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Pass 1          17.00 ( 0.00%)    34.00 (17.00%)    38.00 (21.00%)    43.00 (26.00%)
Pass 2          25.00 ( 0.00%)    37.00 (12.00%)    42.00 (17.00%)    46.00 (21.00%)
At Rest         49.00 ( 0.00%)    43.00 (-6.00%)    45.00 (-4.00%)    51.00 ( 2.00%)

Success rates there are *way* up particularly considering that the 16MB
huge pages on PPC64 mean that it's always much harder to allocate them.

FTrace Reclaim Statistics: vmscan
              stress-highalloc  stress-highalloc  stress-highalloc  stress-highalloc
                traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
Direct reclaims                                499        505        564        509
Direct reclaim pages scanned                223478      41898      51818      45605
Direct reclaim pages reclaimed              137730      21148      27161      23455
Direct reclaim write file async I/O            399        136        162        136
Direct reclaim write anon async I/O          46977       2865       4686       3998
Direct reclaim write file sync I/O              29          0          1          3
Direct reclaim write anon sync I/O           31023        159        237        239
Wake kswapd requests                           420        351        360        326
Kswapd wakeups                                 185        294        249        277
Kswapd pages scanned                      15703488   16392500   17821724   17598737
Kswapd pages reclaimed                     5808466    2908858    3139386    3145435
Kswapd reclaim write file async I/O         159938      18400      18717      13473
Kswapd reclaim write anon async I/O        3467554     228957     322799     234278
Kswapd reclaim write file sync I/O               0          0          0          0
Kswapd reclaim write anon sync I/O               0          0          0          0
Time stalled direct reclaim (seconds)      9665.35    1707.81    2374.32    1871.23
Time kswapd awake (seconds)                9401.21    1367.86    1951.75    1328.88

Total pages scanned                       15926966  16434398  17873542  17644342
Total pages reclaimed                      5946196   2930006   3166547   3168890
%age total pages scanned/reclaimed          37.33%    17.83%    17.72%    17.96%
%age total pages scanned/written            23.27%     1.52%     1.94%     1.43%
%age  file pages scanned/written             1.01%     0.11%     0.11%     0.08%
Percentage Time Spent Direct Reclaim        44.55%    35.10%    41.42%    36.91%
Percentage Time kswapd Awake                86.71%    43.58%    52.67%    41.14%

While the scanning rates are slightly up, the scanned/reclaimed and
scanned/written figures are much improved.  The time spent in direct
reclaim and with kswapd are massively reduced, mostly by the lowlumpy
patches.

FTrace Reclaim Statistics: congestion_wait
Direct number congest     waited               725        303        126          3
Direct time   congest     waited           45524ms     9180ms     5936ms      300ms
Direct full   congest     waited               487        190         52          3
Direct number conditional waited                 0          0        200        301
Direct time   conditional waited               0ms        0ms        0ms     1904ms
Direct full   conditional waited                 0          0          0         19
KSwapd number congest     waited                 0          2         23          4
KSwapd time   congest     waited               0ms      200ms      420ms      404ms
KSwapd full   congest     waited                 0          2          2          4
KSwapd number conditional waited                 0          0          0          0
KSwapd time   conditional waited               0ms        0ms        0ms        0ms
KSwapd full   conditional waited                 0          0          0          0

Not as dramatic a story here but the time spent asleep is reduced and we
can still see what wait_iff_congested is going to sleep when necessary.

MMTests Statistics: duration
User/Sys Time Running Test (seconds)      12028.09   3157.17   3357.79   3199.16
Total Elapsed Time (seconds)              10842.07   3138.72   3705.54   3229.85

The time to complete this test goes way down.  With the full series, we
are allocating over twice the number of huge pages in 30% of the time and
there is a corresponding impact on the allocation latency graph available
at.

http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-powyah-mean.ps

This patch:

Add a trace event for shrink_inactive_list() and updates the sample
postprocessing script appropriately.  It can be used to determine how many
pages were reclaimed and for non-lumpy reclaim where exactly the pages
were reclaimed from.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This removes more dead code that was somehow missed by commit 0d99519e
(writeback: remove unused nonblocking and congestion checks).  There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.

The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion.  The latter will lead to more seeky IO.

The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.

We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
   that would skip some dirty inodes on congestion and page out others, which
   is unfair in terms of LRU age.

Inspired by Christoph Hellwig. Thanks!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the addition of trace_softirq_raise() the softirq tracepoint got
even more convoluted. Why the tracepoints take two pointers to assign
an integer is beyond my comprehension.

But adding an extra case which treats the first pointer as an unsigned
long when the second pointer is NULL including the back and forth
type casting is just horrible.

Convert the softirq tracepoints to take a single unsigned int argument
for the softirq vector number and fix the call sites.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <alpine.LFD.2.00.1010191428560.6815@localhost6.localdomain6>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: mathieu.desnoyers@efficios.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

These two tracepoints allow tracking when and how a work is queued and
activated.  This patch is based on Frederic's patch to add queue_work
trace point.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>

Define workqueue_work event class and use it for workqueue_execute_end
trace point.  Also, move trace/events/workqueue.h include downwards
such that all struct definitions are visible to it.  This is to
prepare for more tracepoints and doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>

Add a tracepoint that shows the priority of a task being boosted
via priority inheritance.

Cc: Gregory Haskins <ghaskins@novell.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds new generic events for dynamic power management
tracing:

 - clock events class: used for clock enable/disable and for
   clock rate change,
 - power_domain events class: used for power domains transitions.

The OMAP architecture will be using the new events for PM debugging,
however the new events are made generic enough to be used by all
platforms.
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Acked-by: NThomas Renninger <trenn@suse.de>
Cc: discuss@lesswatts.org
Cc: linux-pm@lists.linux-foundation.org
Cc: Thomas Renninger <trenn@suse.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
LKML-Reference: <AANLkTinUmbSUUuxUzc8++pcb9gd1CZFdyTQFrveTBXyV@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds tracepoint to consume_skb and add trace_kfree_skb
before __kfree_skb in skb_free_datagram_locked and net_tx_action.
Combinating with tracepoint on dev_hard_start_xmit, we can check
how long it takes to free transmitted packets. And using it, we can
calculate how many packets driver had at that time. It is useful when
a drop of transmitted packet is a problem.

            sshd-6828  [000] 112689.258154: consume_skb: skbaddr=f2d99bb8
Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com>
Cc: Izumo Taku <izumi.taku@jp.fujitsu.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Scott Mcmillan <scott.a.mcmillan@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4C724364.50903@jp.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

This patch adds tracepoint to dev_queue_xmit, dev_hard_start_xmit,
netif_rx and netif_receive_skb. These tracepoints help you to monitor
network driver's input/output.

          <idle>-0     [001] 112447.902030: netif_rx: dev=eth1 skbaddr=f3ef0900 len=84
          <idle>-0     [001] 112447.902039: netif_receive_skb: dev=eth1 skbaddr=f3ef0900 len=84
            sshd-6828  [000] 112447.903257: net_dev_queue: dev=eth4 skbaddr=f3fca538 len=226
            sshd-6828  [000] 112447.903260: net_dev_xmit: dev=eth4 skbaddr=f3fca538 len=226 rc=0
Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com>
Cc: Izumo Taku <izumi.taku@jp.fujitsu.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Scott Mcmillan <scott.a.mcmillan@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4C72431E.3000901@jp.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

This patch converts trace_napi_poll from DECLARE_EVENT to TRACE_EVENT
to improve the usability of napi_poll tracepoint.

          <idle>-0     [001] 241302.750777: napi_poll: napi poll on napi struct f6acc480 for device eth3
          <idle>-0     [000] 241302.852389: napi_poll: napi poll on napi struct f5d0d70c for device eth1

The original patch is below:
http://marc.info/?l=linux-kernel&m=126021713809450&w=2

[ sanagi.koki@jp.fujitsu.com: And add a fix by Steven Rostedt:
http://marc.info/?l=linux-kernel&m=126150506519173&w=2 ]
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com>
Cc: Izumo Taku <izumi.taku@jp.fujitsu.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Scott Mcmillan <scott.a.mcmillan@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4C7242D7.4050009@jp.fujitsu.com>
Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add a tracepoint for tracing when softirq action is raised.

This and the existing tracepoints complete softirq's tracepoints:
softirq_raise, softirq_entry and softirq_exit.

And when this tracepoint is used in combination with
the softirq_entry tracepoint we can determine
the softirq raise latency.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Cc: Kaneshige Kenji <kaneshige.kenji@jp.fujitsu.com>
Cc: Izumo Taku <izumi.taku@jp.fujitsu.com>
Cc: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Scott Mcmillan <scott.a.mcmillan@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4C724298.4050509@jp.fujitsu.com>
[ factorize softirq events with DECLARE_EVENT_CLASS ]
Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PowerTOP would like to be able to trace timers.

Unfortunately, the current timer tracing is not very useful: the
actual timer function is not recorded in the trace at the start
of timer execution.

Although this is recorded for timer "start" time (when it gets
armed), this is not useful; most timers get started early, and a
tracer like PowerTOP will never see this event, but will only
see the actual running of the  timer.

This patch just adds the function to the timer tracing; I've
verified with PowerTOP that now it can get useful information
about timers.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: xiaoguangrong@cn.fujitsu.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org> # .35.x, .34.x, .33.x
LKML-Reference: <4C6C5FA9.3000405@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Memcg also need to trace page isolation information as global reclaim.
This patch does it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mel Gorman recently added some vmscan tracepoints.  Unfortunately they are
covered only global reclaim.  But we want to trace memcg reclaim too.

Thus, this patch convert them to DEFINE_TRACE macro.  it help to reuse
tracepoint definition for other similar usage (i.e.  memcg).  This patch
have no functionally change.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memcg also need to trace reclaim progress as direct reclaim.  This patch
add it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mel Gorman recently added some vmscan tracepoints.  Unfortunately they are
covered only global reclaim.  But we want to trace memcg reclaim too.

Thus, this patch convert them to DEFINE_TRACE macro.  it help to reuse
tracepoint definition for other similar usage (i.e.  memcg).  This patch
have no functionally change.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a trace event for when page reclaim queues a page for IO and records
whether it is synchronous or asynchronous.  Excessive synchronous IO for a
process can result in noticeable stalls during direct reclaim.  Excessive
IO from page reclaim may indicate that the system is seriously under
provisioned for the amount of dirty pages that exist.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an event for when pages are isolated en-masse from the LRU lists.
This event augments the information available on LRU traffic and can be
used to evaluate lumpy reclaim.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add two trace events for kswapd waking up and going asleep for the
purposes of tracking kswapd activity and two trace events for direct
reclaim beginning and ending.  The information can be used to work out how
much time a process or the system is spending on the reclamation of pages
and in the case of direct reclaim, how many pages were reclaimed for that
process.  High frequency triggering of these events could point to memory
pressure problems.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add 2 new trace points to the periodic write-back wake up case, just like we do
in the 'bdi_queue_work()' function. Namely, introduce:

1. trace_writeback_wake_thread(bdi)
2. trace_writeback_wake_forker_thread(bdi)

The first event is triggered every time we wake up a bdi thread to start
periodic background write-out. The second event is triggered only when the bdi
thread does not exist and should be created by the forker thread.

This patch was suggested by Dave Chinner and Christoph Hellwig.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

include/trace/events/writeback.h uses dev_name(), so it needs to
include linux/device.h.

include/trace/events/writeback.h:12: error: implicit declaration of function 'dev_name'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Add a trace event to the ->writepage loop in write_cache_pages to give
visibility into how the ->writepage call is changing variables within the
writeback control structure. Of most interest is how wbc->nr_to_write changes
from call to call, especially with filesystems that write multiple pages
in ->writepage.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Tracing high level background writeback events is good, but it doesn't
give the entire picture. Add visibility into write throttling to catch IO
dispatched by foreground throttling of processing dirtying lots of pages.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Trace queue/sched/exec parts of the writeback loop. This provides
insight into when and why flusher threads are scheduled to run. e.g
a sync invocation leaves traces like:

     sync-[...]: writeback_queue: bdi 8:0: sb_dev 8:1 nr_pages=7712 sync_mode=0 kupdate=0 range_cyclic=0 background=0
flush-8:0-[...]: writeback_exec: bdi 8:0: sb_dev 8:1 nr_pages=7712 sync_mode=0 kupdate=0 range_cyclic=0 background=0

This also lays the foundation for adding more writeback tracing to
provide deeper insight into the whole writeback path.

The original tracing code is from Jens Axboe, though this version is
a rewrite as a result of the code being traced changing
significantly.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests.  This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric way
in acpi-cpufreq driver's target() function only.
-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq drivers

trace_power_frequency did not trace frequency changes correctly when
the userspace governor was used or when CPU cores' frequency depend
on each other.
-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my initial
quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
CC: robert.schoene@tu-dresden.de
Tested-by: robert.schoene@tu-dresden.de
Signed-off-by: NDave Jones <davej@redhat.com>

Drop the cpparg() macro that wraps CPP parameters. We already have
the PARAM() macro for that, no need to have several versions.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>

The allocation_context pointer can be NULL.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric
way in acpi-cpufreq driver's target() function only.

-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq
   drivers.

trace_power_frequency did not trace frequency changes correctly
when the userspace governor was used or when CPU cores'
frequency depend on each other.

-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my
initial quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id

[akpm@linux-foundation.org: build fix]
Signed-off-by: NThomas Renninger <trenn@suse.de>
Cc: davej@codemonkey.org.uk
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Dave Jones <davej@codemonkey.org.uk>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Cc: Robert Schoene <robert.schoene@tu-dresden.de>
Tested-by: NRobert Schoene <robert.schoene@tu-dresden.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

__print_flags() and __print_symbolic() use percpu trace_seq:

1) Its memory is allocated at compile time, it wastes memory if we don't use tracing.
2) It is percpu data and it wastes more memory for multi-cpus system.
3) It disables preemption when it executes its core routine
   "trace_seq_printf(s, "%s: ", #call);" and introduces latency.

So we move this trace_seq to struct trace_iterator.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C078350.7090106@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Strip tracing code from workqueue and remove workqueue tracing.  This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>