Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.

SGI-PV: 988142

SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

SGI-PV: 988141

SGI-Modid: xfs-linux-melb:xfs-kern:32325a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

With the combined linux and XFS inode, we need to ensure that the combined
structure is not freed before the generic code is finished with the inode.
As it turns out, there is a case where the XFS inode is freed before the
linux inode - when xfs_reclaim() is called from ->clear_inode() on a clean
inode, the xfs inode is freed during that call. The generic code
references the inode after the ->clear_inode() call, so this is a use
after free situation.

Fix the problem by moving the xfs_reclaim() call to ->destroy_inode()
instead of in ->clear_inode(). This ensures the combined inode structure
is not freed until after the generic code has finished with it.

SGI-PV: 988141

SGI-Modid: xfs-linux-melb:xfs-kern:32324a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

To avoid issues with different lifecycles of XFS and Linux inodes, embedd
the linux inode inside the XFS inode. This means that the linux inode has
the same lifecycle as the XFS inode, even when it has been released by the
OS. XFS inodes don't live much longer than this (a short stint in reclaim
at most), so there isn't significant memory usage penalties here.

Version 3 o kill xfs_icount()

Version 2 o remove unused commented out code from xfs_iget(). o kill
useless cast in VFS_I()

SGI-PV: 988141

SGI-Modid: xfs-linux-melb:xfs-kern:32323a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Once the Linux inode and the XFS inode are combined, we cannot rely on
just check if the linux inode exists as a method of determining if it is
valid or not. Hence we should always call xfs_mark_inode_dirty_sync()
instead as it does the correct checks to determine if the liinux inode is
in a valid state or not.

SGI-PV: 988141

SGI-Modid: xfs-linux-melb:xfs-kern:32318a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

With all the other filesystem sync code it in xfs_sync.c including the
data quiesce code, it makes sense to move the remaining quiesce code to
the same place.

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32312a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

SYNC_CLOSE is only ever used and checked in conjunction with SYNC_WAIT,
and this only done in one spot. The only thing this does is make
XFS_bflush() calls to the data buftargs.

This will happen very shortly afterwards the xfs_sync() call anyway in the
unmount path via the xfs_close_devices(), so this code is redundant and
can be removed. That only user of SYNC_CLOSE is now gone, so kill the flag
completely.

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32310a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Continue to de-multiplex xfs_sync be replacing all SYNC_DELWRI callers
with direct calls functions that do the work. Isolate the data quiesce
case to a function in xfs_sync.c. Isolate the FSDATA case with explicit
calls to xfs_sync_fsdata().

Version 2: o Push delwri related log forces into xfs_sync_inodes().

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32309a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Continue to de-multiplex xfs_sync be replacing all SYNC_ATTR callers with
direct calls xfs_sync_inodes(). Add an assert into xfs_sync() to ensure we
caught all the SYNC_ATTR callers.

SGI-PV: 988140

SGI-Modid: xfs-linux-melb:xfs-kern:32308a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Move all the xfssyncd code to the new xfs_sync.c file. This places it
closer to the actual code that it interacts with, rather than just being
associated with high level VFS code.

SGI-PV: 988139

SGI-Modid: xfs-linux-melb:xfs-kern:32283a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

The sync code in XFS is spread around several files. While it used to make
sense to have such a distribution, the code is about to be cleaned up and
so centralising it in one spot as the first step makes sense.

SGI-PV: 988139

SGI-Modid: xfs-linux-melb:xfs-kern:32282a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Make the existing bmap btree tracing generic so that it applies to all
btree types.

Some fragments lifted from a patch by Dave Chinner.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NBill O'Donnell <billodo@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>

kmem cache constructor no longer takes a kmem_zone_t argument.

SGI-PV: 957103

SGI-Modid: xfs-linux-melb:xfs-kern:32254a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

To avoid having to initialise some fields of the XFS inode on every
allocation, we can use the slab init-once feature to initialise them. All
we have to guarantee is that when we free the inode, all it's entries are
in the initial state. Add asserts where possible to ensure debug kernels
check this initial state before freeing and after allocation.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31925a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

replace open_bdev_excl/close_bdev_excl with variants taking fmode_t.
superblock gets the value used to mount it stored in sb->s_mode
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When we skip unrecognized options in xfs_fs_remount we should just break
out of the switch and not return because otherwise we may skip clearing
the xfs-internal read-only flag.  This will only show up on some
operations like touch because most read-only checks are done by the VFS
which thinks this filesystem is r/w.  Eventually we should replace the
XFS read-only flag with a helper that always checks the VFS flag to make
sure they can never get out of sync.

Bug reported and fix verified by Marcel Beister on #xfs.
Bug fix verified by updated xfstests/189.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NTimothy Shimmin <tes@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Logically we would return an error in xfs_fs_remount code to prevent users
from believing they might have changed mount options using remount which
can't be changed.

But unfortunately mount(8) adds all options from mtab and fstab to the
mount arguments in some cases so we can't blindly reject options, but have
to check for each specified option if it actually differs from the
currently set option and only reject it if that's the case.

Until that is implemented we return success for every remount request, and
silently ignore all options that we can't actually change.

SGI-PV: 985710

SGI-Modid: xfs-linux-melb:xfs-kern:31908a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_readsb is called before xfs_mount so xfs_freesb should be called after
xfs_unmountfs, too. This means it now happens after a few things during
the of xfs_unmount which all have nothing to do with the superblock.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31835a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Remove all the useless flags and code keyed off it in xfs_mountfs.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The root inode is allocated in xfs_mountfs so it should be release in
xfs_unmountfs. For the unmount case that means we do it after the the
xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE) in the forced shutdown case and the
dmapi unmount event. Note that both reference the rip variable which might
be freed by that time in case inode flushing has kicked in, so strictly
speaking this might count as a bug fix

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31830a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Sanitize setting up the Linux indode.

Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now
because that's the only place it needs to be done, xfs_initialize_vnode is
renamed to xfs_setup_inode and loses all superflous paramaters. The check
for I_NEW is removed because it always is true and the di_mode check moves
into xfs_iget_core because it's only needed there.

xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode
and the whole things is moved into xfs_iops.c where it belongs.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31782a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

All remaining bhv_vnode_t instance are in code that's more or less Linux
specific. (Well, for xfs_acl.c that could be argued, but that code is on
the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the
whole tree. We can clean up variable naming and some useless helpers
later.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31781a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

In various places we can just move a VFS_I call into the argument list of
called functions/macros instead of having a local bhv_vnode_t.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31776a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31761a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

bhv_vnode_t is just a typedef for struct inode, so there's
no need for a helper to convert between the two.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31760a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Add a helper to free the m_fsname/m_rtname/m_logname allocations and use
it properly for all mount failure cases. Also switch the allocations for
these to kstrdup while we're at it.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31728a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Replace XFS_ITOV() with the new VFS_I() inline.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31724a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

In several places we directly convert from the XFS inode
to the linux (VFS) inode by a simple deference of ip->i_vnode.
We should not do this - a helper function should be used to
extract the VFS inode from the XFS inode.

Introduce the function VFS_I() to extract the VFS inode
from the XFS inode. The name was chosen to match XFS_I() which
is used to extract the XFS inode from the VFS inode.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31720a
Signed-off-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 983806

SGI-Modid: xfs-linux-melb:xfs-kern:31666a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Remount currently happily accept any option thrown at it, although the
only filesystem specific option it actually handles is barrier/nobarrier.
And it actually doesn't handle these correctly either because it only uses
the value it parsed when we're doing a ro->rw transition. In addition to
that there's also a bad bug in xfs_parseargs which doesn't touch the
actual option in the mount point except for a single one,
XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every
remounted in some way to not support 64bit inodes with no way to recover
unless unmounted.

This patch changes xfs_fs_remount to use it's own linux/parser.h based
options parse instead of xfs_parseargs and reject all options except for
barrier/nobarrier and to the right thing in general. Eventually I'd like
to have a single big option table used for mount aswell but that can wait
for a while.

SGI-PV: 983964

SGI-Modid: xfs-linux-melb:xfs-kern:31382a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

md raid1 can pass down barriers, but does not set an ordered flag on the
queue, so xfs does not even attempt a barrier write, and will never use
barriers on these block devices.

Remove the flag check and just let the barrier write test determine
barrier support.

A possible risk here is that if something does not set an ordered flag and
also does not properly return an error on a barrier write... but if it's
any consolation jbd/ext3/reiserfs never test the flag, and don't even do a
test write, they just disable barriers the first time an actual journal
barrier write fails.

SGI-PV: 983924

SGI-Modid: xfs-linux-melb:xfs-kern:31377a
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Currently the xfs module init/exit code is a mess. It's farmed out over a
lot of function with very little error checking. This patch makes sure we
propagate all initialization failures properly and clean up after them.
Various runtime initializations are replaced with compile-time
initializations where possible to make this easier. The exit path is
similarly consolidated.

There's now split out function to create/destroy the kmem zones and
alloc/free the trace buffers. I've also changed the ktrace allocations to
KM_MAYFAIL and handled errors resulting from that.

And yes, we really should replace the XFS_*_TRACE ifdefs with a single
XFS_TRACE..

SGI-PV: 976035

SGI-Modid: xfs-linux-melb:xfs-kern:31354a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Use the generic set, get and removexattr methods and supply the s_xattr
array with fine-grained handlers. All XFS/Linux highlevel attr handling is
rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so
that it's separated from the generic low-level code.

SGI-PV: 982343

SGI-Modid: xfs-linux-melb:xfs-kern:31234a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Implement ASCII case-insensitive support. It's primary purpose is for
supporting existing filesystems that already use this case-insensitive
mode migrated from IRIX. But, if you only need ASCII-only case-insensitive
support (ie. English only) and will never use another language, then this
mode is perfectly adequate.

ASCII-CI is implemented by generating hashes based on lower-case letters
and doing lower-case compares. It implements a new xfs_nameops vector for
doing the hashes and comparisons for all filename operations.

To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci
<device>

SGI-PV: 981516
SGI-Modid: xfs-linux-melb:xfs-kern:31209a
Signed-off-by: NBarry Naujok <bnaujok@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31199a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31198a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_binval aka xfs_flush_buftarg is the first thing done in
xfs_free_buftarg, so there is no need to have duplicated calls just before
xfs_free_buftarg in the mount failure path.

SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31197a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched
to kzalloc. Plug a leak of the mount structure for most early mount
failures. Move xfs_icsb_init_counters to as late as possible in the mount
path and make sure to undo it so that no stale hotplug cpu notifiers are
left around on mount failures.

SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31196a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Switch xfs_args_allocate to kzalloc and handle failures.

SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31195a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>