- 12 8月, 2011 14 次提交
-
-
由 Peter Hurley 提交于
Fix race condition which can result in missing wakeup during l2cap socket shutdown. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Fix race condition which can result in missing the wakeup intended to stop the session thread. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Fix race condition which can result in missing the wakeup intended to stop the session thread. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Fix race conditions which can cause lost wakeups (or missed signals) while waiting to accept a sco socket connection. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Fix race conditions which can cause lost wakeups (or misssed signals) while waiting to accept an l2cap socket connection. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Fix race conditions which can cause lost wakeups while waiting for sock state to change. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Fix race conditions which can cause lost wakeups (or missed signals) while waiting to accept an rfcomm socket connection. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Peter Hurley 提交于
Removed superfluous event handling which was used to signal that the rfcomm kthread had been woken. This appears to have been used to prevent lost wakeups. Correctly ordering when the task state is set to TASK_INTERRUPTIBLE is sufficient to prevent lost wakeups. To prevent wakeups which occurred prior to initially setting TASK_INTERRUPTIBLE from being lost, the main work of the thread loop - rfcomm_process_sessions() - is performed prior to sleeping. Signed-off-by: NPeter Hurley <peter@hurleysoftware.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Ricardo Mendoza 提交于
Blacklist Toshiba-branded AR3011 based AR5B195 [0930:0215] and add to ath3k.c for firmware loading. Signed-off-by: NRicardo Mendoza <ricmm@gentoo.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Paul Bolle 提交于
Disabling the bluetooth usb device embedded in (some) ThinkPads tends to lead to errors like these: btusb_bulk_complete: hci0 urb ffff88011b9bfd68 failed to resubmit (19) btusb_intr_complete: hci0 urb ffff88011b46a318 failed to resubmit (19) btusb_bulk_complete: hci0 urb ffff88011b46a000 failed to resubmit (19) That is because usb_disconnect() doesn't "quiesces" pending urbs. Disconnecting a device is a normal thing to happen so it's no big deal that usb_submit_urb() returns -ENODEV. The simplest way to get rid of these errors is to stop treating that return as an error. Trivial, actually. While we're at it, add comments to be explicit about the reasons we're not complaining about -EPERM and -ENODEV. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Dan Carpenter 提交于
There was a small typo here so we never actually hit the goto which would call hci_dev_unlock_bh(). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Stanislaw Gruszka 提交于
Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f81b30c9>] rt2800usb_get_txwi+0x19/0x70 [rt2800usb] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 198, comm: kworker/u:3 Tainted: G W 3.0.0-wl+ #9 LENOVO 6369CTO/6369CTO EIP: 0060:[<f81b30c9>] EFLAGS: 00010283 CPU: 1 EIP is at rt2800usb_get_txwi+0x19/0x70 [rt2800usb] EAX: 00000000 EBX: f465e140 ECX: f4494960 EDX: ef24c5f8 ESI: 810f21f5 EDI: f1da9960 EBP: f4581e80 ESP: f4581e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:3 (pid: 198, ti=f4580000 task=f4494960 task.ti=f4580000) Call Trace: [<f804790f>] rt2800_txdone_entry+0x2f/0xf0 [rt2800lib] [<c045110d>] ? warn_slowpath_common+0x7d/0xa0 [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a38>] ? rt2800usb_work_txdone+0x288/0x360 [rt2800usb] [<f81b3a13>] rt2800usb_work_txdone+0x263/0x360 [rt2800usb] [<c046a8d6>] process_one_work+0x186/0x440 [<c046a85a>] ? process_one_work+0x10a/0x440 [<f81b37b0>] ? rt2800usb_probe_hw+0x120/0x120 [rt2800usb] [<c046c283>] worker_thread+0x133/0x310 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<c046c150>] ? manage_workers+0x1e0/0x1e0 [<c047054c>] kthread+0x7c/0x90 [<c04704d0>] ? __init_kthread_worker+0x60/0x60 [<c0826b42>] kernel_thread_helper+0x6/0x1 Oops might happen because we check rt2x00queue_empty(queue) twice, but this condition can change and we can process entry in rt2800_txdone_entry(), which was already processed by rt2800usb_txdone_entry_check() -> rt2x00lib_txdone_noinfo() and has nullify entry->skb . Reported-by: NJustin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
In rt2800usb_work_txdone we check flags in order: - ENTRY_OWNER_DEVICE_DATA - ENTRY_DATA_STATUS_PENDING - ENTRY_DATA_IO_FAILED Modify flags in separate order in rt2x00usb_interrupt_txdone, to avoid processing entries in _txdone with wrong flags or skip processing ready entries. Reported-by: NJustin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Patch should fix this oops: BUG: unable to handle kernel NULL pointer dereference at 000000a0 IP: [<f8e06078>] rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] *pdpt = 000000002408c001 *pde = 0000000024079067 *pte = 0000000000000000 Oops: 0000 [#1] SMP EIP: 0060:[<f8e06078>] EFLAGS: 00010282 CPU: 0 EIP is at rt2800usb_write_tx_desc+0x18/0xc0 [rt2800usb] EAX: 00000035 EBX: ef2bef10 ECX: 00000000 EDX: d40958a0 ESI: ef1865f8 EDI: ef1865f8 EBP: d4095878 ESP: d409585c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [<f8da5e85>] rt2x00queue_write_tx_frame+0x155/0x300 [rt2x00lib] [<f8da424c>] rt2x00mac_tx+0x7c/0x370 [rt2x00lib] [<c04882b2>] ? mark_held_locks+0x62/0x90 [<c081f645>] ? _raw_spin_unlock_irqrestore+0x35/0x60 [<c04884ba>] ? trace_hardirqs_on_caller+0x5a/0x170 [<c04885db>] ? trace_hardirqs_on+0xb/0x10 [<f8d618ac>] __ieee80211_tx+0x5c/0x1e0 [mac80211] [<f8d631fc>] ieee80211_tx+0xbc/0xe0 [mac80211] [<f8d63163>] ? ieee80211_tx+0x23/0xe0 [mac80211] [<f8d632e1>] ieee80211_xmit+0xc1/0x200 [mac80211] [<f8d63220>] ? ieee80211_tx+0xe0/0xe0 [mac80211] [<c0487d45>] ? lock_release_holdtime+0x35/0x1b0 [<f8d63986>] ? ieee80211_subif_start_xmit+0x446/0x5f0 [mac80211] [<f8d637dd>] ieee80211_subif_start_xmit+0x29d/0x5f0 [mac80211] [<f8d63924>] ? ieee80211_subif_start_xmit+0x3e4/0x5f0 [mac80211] [<c0760188>] ? sock_setsockopt+0x6a8/0x6f0 [<c0760000>] ? sock_setsockopt+0x520/0x6f0 [<c076daef>] dev_hard_start_xmit+0x2ef/0x650 Oops might happen because we perform parallel putting new entries in a queue (rt2x00queue_write_tx_frame()) and removing entries after finishing transmitting (rt2800usb_work_txdone()). There are cases when _txdone may process an entry that was not fully send and nullify entry->skb . To fix check in _txdone if entry has flags that indicate pending transmission and wait until flags get cleared. Reported-by: NJustin Piszcz <jpiszcz@lucidpixels.com> Cc: stable@kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 8月, 2011 1 次提交
-
-
由 Julia Lawall 提交于
In each case, the kfree already at the end of the function is also needed in the error case. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 10 8月, 2011 8 次提交
-
-
由 Bob Copeland 提交于
This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Cc: stable@kernel.org Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Anthony Bourguignon 提交于
This patch add a device id for the wifi usb keys shiped by DVICO with some of their tvix hardware. Signed-off-by: NAnthony Bourguignon <contact+kernel@toniob.net> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alex Hacker 提交于
This patch addresses an issue with incorrect HW register AR_PHY_TX_IQCAL_CORR_COEFF_B1 definition which leads to incorrect clibration. Cc: stable@kernel.org Signed-off-by: NAlex Hacker <hacker@epn.ru> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Reported-by: NMaik-Holger Freudenberg <hhfeuer@gmx.de> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This patch fixes several problems in the USB_DEVICE table, including missing IDs, reversed vendor/product codes, and a duplicate ID. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
The commit ebefce3d failed to set proper PMU value to address ripple issue for AR9485. Cc: stable@kernel.org Signed-off-by: NRajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rajkumar Manoharan 提交于
CTL power data incorrect in ctlPowerData_2G field of ar9300_eeprom. Setting incorrect CTL power in calibration is causing lower tx power. Tx power was reported as 3dBm while operating in channel 6 HT40+/ in channel 11 HT40- due to CTL powers in the calibration is set to zero. Cc: stable@kernel.org Signed-off-by: NRajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Hauke Mehrtens 提交于
This causes an databus error on a Broadcom SoC using bcma. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 8月, 2011 5 次提交
-
-
由 Wey-Yi Guy 提交于
5000 series has issue supporting power save idle mode: commit 9dc21533 iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Cc: stable@kernel.org #2.6.39, #3.0.0 Reported-by: NDevin J Pohly <djpohly+iwl@gmail.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug was introduced by commit 62fe7784 "rt2x00: Fix stuck queue in tx failure case" . Cc: stable@kernel.org # 3.0+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
This was introduced by commit 77b5621b (rt2x00: Don't use queue entry as parameter when creating TX descriptor.) Signed-off-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This bug has been introduced by: d5934110 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by: NDaniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
- 02 8月, 2011 6 次提交
-
-
由 Stanislaw Gruszka 提交于
We should clear skb->data not skb itself. Bug was introduced by: commit 0b8004aa "rt2x00: Properly reserve room for descriptors in skbs". Cc: stable@kernel.org # 2.6.36+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
This driver uses information from the self member of the pci_bus struct to get information regarding the bridge to which the PCIe device is attached. Unfortunately, this member is not established on all architectures, which leads to a kernel oops. Skipping the entire block that uses the self member to determine the bridge vendor will only affect RTL8192DE devices as that driver sets the ASPM support flag differently when the bridge vendor is Intel. If the self member is available, there is no functional change. This patch fixes Bugzilla No. 40212. Reported-by: NHubert Liao <liao.hubertt@gmail.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [back to 2.6.38] Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa0 Author: Vivek Natarajan <vnatarajan@atheros.com> Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: NCamilo Mesias <camilo@mesias.co.uk> Cc: stable@kernel.org # 2.6.35+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Carpenter 提交于
The test is off by one so we'd read past the end of the wiphy->bands[] array on the next line. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
If settings of tx power was deferred during scan or changing channel we have to setup them during commit rxon. Fix problem on 3945 (4965 already has this fix). Optimize code to apply tx settings only when tx power was actually changed. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
With an uninitialized chainmask, the per-channel power will only contain the power limits for a single chain instead of the combined tx power. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 7月, 2011 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6 gro: Only reset frag0 when skb can be pulled ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: (75 commits) md/raid10: handle further errors during fix_read_error better. md/raid10: Handle read errors during recovery better. md/raid10: simplify read error handling during recovery. md/raid10: record bad blocks due to write errors during resync/recovery. md/raid10: attempt to fix read errors during resync/check md/raid10: Handle write errors by updating badblock log. md/raid10: clear bad-block record when write succeeds. md/raid10: avoid writing to known bad blocks on known bad drives. md/raid10 record bad blocks as needed during recovery. md/raid10: avoid reading known bad blocks during resync/recovery. md/raid10 - avoid reading from known bad blocks - part 3 md/raid10: avoid reading from known bad blocks - part 2 md/raid10: avoid reading from known bad blocks - part 1 md/raid10: Split handle_read_error out from raid10d. md/raid10: simplify/reindent some loops. md/raid5: Clear bad blocks on successful write. md/raid5. Don't write to known bad block on doubtful devices. md/raid5: write errors should be recorded as bad blocks if possible. md/raid5: use bad-block log to improve handling of uncorrectable read errors. md/raid5: avoid reading from known bad blocks. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oss: rename local change_bits to avoid powerpc bitsops.h definition ALSA: hda - Fix duplicated DAC assignments for Realtek ALSA: asihpi - off by one in asihpi_hpi_ioctl() ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids ALSA: asihpi - bug fix pa use before init. ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
-
由 Matt Carlson 提交于
The A0 revision of this chip is the only device that requires these features to be disabled. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The 5719 has bug where RDMAs larger than 4k can cause problems. This patch works around the problem by dividing larger DMA requests into something the hardware can handle. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
As the driver breaks large skb fragments into smaller submissions to the hardware, there is a new danger that BDs might get exhausted before all fragments have been mapped. This patch adds code to make sure tx BDs aren't oversubscribed and flag the condition if it happens. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-