- 13 4月, 2009 7 次提交
-
-
由 Ryusuke Konishi 提交于
This will simplify sufile.c by sharing common code which repeatedly appears in routines updating a segment usage entry; a wrapper function nilfs_sufile_update() is introduced for the purpose, and counter modifications are integrated to a new function nilfs_sufile_mod_counter(). This is a preparation for the successive bugfix patch ("nilfs2: fix possible mismatch of sufile counters on recovery"). Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
The nilfs_sufile_set_error() function wrongly adjusts the number of dirty segments instead of the number of clean segments. In addition, the function calls brelse() twice for the same buffer head. This fixes these bugs. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
This fixes a bug of ("nilfs2: simplify handling of active state of segments") patch. The patch did not take account that a base index is increased in nilfs_sufile_get_suinfo() function if requested entries go across block boundary on sufile. Due to this bug, the active flag sometimes appears on wrong segments and has induced malfunction of garbage collection. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
A MODULE_VERSION() macro has been used in out-of-tree nilfs modules, but it's needless and not updated in tree. So, this removes it along with the version declaration. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
This fixes the following false detection of lockdep against nilfs meta data files: ============================================= [ INFO: possible recursive locking detected ] 2.6.29 #26 --------------------------------------------- mount.nilfs2/4185 is trying to acquire lock: (&mi->mi_sem){----}, at: [<d0c7925b>] nilfs_sufile_get_stat+0x1e/0x105 [nilfs2] but task is already holding lock: (&mi->mi_sem){----}, at: [<d0c72026>] nilfs_count_free_blocks+0x48/0x84 [nilfs2] Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
The bmap semaphore of DAT file can be held while a bmap of other files is locked. This has caused the following false detection of lockdep check: mount.nilfs2/4667 is trying to acquire lock: (&bmap->b_sem){..--}, at: [<d0c6c4b4>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2] but task is already holding lock: (&bmap->b_sem){..--}, at: [<d0c6c4b4>] nilfs_bmap_lookup_at_level+0x1a/0x74 [nilfs2] This will fix the false detection by distinguishing semaphores of the DAT and other files. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
由 Ryusuke Konishi 提交于
This follows the change of Coly Li's series ("fs: return f_fsid for statfs(2)"), and make nilfs2 return f_fsid info for statfs(2). Acked-by: NColy Li <coly.li@suse.de> Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
-
- 12 4月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 5d38258e, since the underlying problem got fixed properly in the previous commit ("async: Fix module loading async-work regression"). Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Several drivers use asynchronous work to do device discovery, and we synchronize with them in the compiled-in case before we actually try to mount root filesystems etc. However, when compiled as modules, that synchronization is missing - the module loading completes, but the driver hasn't actually finished probing for devices, and that means that any user mode that expects to use the devices after the 'insmod' is now potentially broken. We already saw one case of a similar issue in the ACPI battery code, where the kernel itself expected the module to be all done, and unmapped the init memory - but the async device discovery was still running. That got hacked around by just removing the "__init" (see commit 5d38258e "ACPI battery: fix async boot oops"), but the real fix is to just make the module loading wait for all async work to be completed. It will slow down module loading, but since common devices should be built in anyway, and since the bug is really annoying and hard to handle from user space (and caused several S3 resume regressions), the simple fix to wait is the right one. This fixes at least http://bugzilla.kernel.org/show_bug.cgi?id=13063 but probably a few other bugzilla entries too (12936, for example), and is confirmed to fix Rafael's storage driver breakage after resume bug report (no bugzilla entry). We should also be able to now revert that ACPI battery fix. Reported-and-tested-by: NRafael J. Wysocki <rjw@suse.com> Tested-by: NHeinz Diehl <htd@fancy-poultry.org> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 4月, 2009 3 次提交
-
-
由 Linus Torvalds 提交于
Requested-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/~dwmw2/firmware-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/~dwmw2/firmware-2.6: qla1280: Fix off-by-some error in firmware loading. Add README.AddingFirmware file. Basically telling people not to. firmware: Remove newly-added slicoss and sxg firmware images firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw ALSA: wavefront - Always use request_firmware() Remove fdump tool for av7110 firmware firmware: convert av7110 driver to request_firmware() Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card" Revert "fix modules_install via NFS" Add-add conflicts in firmware/WHENCE fixed manually
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: Separate out the proc- and unit-specific header directories from the general Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.
-
- 10 4月, 2009 18 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Move to arch/frv/include/asm/ FRV: Fix indentation errors to keep git-am happy when moving arch header files
-
由 David Howells 提交于
MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations. This permits the symlinks include/asm/proc and include/asm/unit to be dispensed with. This does, however, require that #include <asm/proc/xxx.h> be converted to #include <proc/xxx.h> and similarly for asm/unit -> unit. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Move arch headers from include/asm-frv/ to arch/frv/include/asm/. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Fix indentation errors to keep git-am happy when moving arch header files. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits) xsysace: Fix dereferencing of cf_id after hd_driveid removal at91_ide: turn on PIO 6 support at91_ide: remove unused ide_mm_{outb,inb} ide-cd: reverse NOT_READY sense key logic ide: refactor tf_read() method ide: refactor tf_load() method ide: call write_devctl() method from tf_read() method ide: move common code out of tf_load() method ide: simplify 'struct ide_taskfile' ide: replace IDE_TFLAG_* flags by IDE_VALID_* ide-cd: fix intendation in cdrom_decode_status() ide-cd: unify handling of fs and pc requests in cdrom_decode_status() ide-cd: convert cdrom_decode_status() to use switch statements ide-cd: update debugging support ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status() ide: remove unused #include <linux/version.h> tx4939ide: Fix tx4939ide_{in,out}put_data_swap argument tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read} ide-cd: carve out an ide_cd_breathe()-helper for fs write requests ide-cd: move status checking into the IRQ handler ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Add support for new SFP+ PHY RDMA/nes: Add wide_ppm_offset parm for switch compatibility RDMA/nes: Fix SFP+ PHY initialization RDMA/nes: Fix nes_nic_cm_xmit() error handling RDMA/nes: Fix error handling issues RDMA/nes: Fix incorrect casts on 32-bit architectures IPoIB: Document newish features RDMA/cma: Create cm id even when IB port is down RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groups IPoIB: Avoid free_netdev() BUG when destroying a child interface mlx4_core: Don't leak mailbox for SET_PORT on Ethernet ports RDMA/cxgb3: Release dependent resources only when endpoint memory is freed. RDMA/cxgb3: Handle EEH events IB/mlx4: Use pgprot_writecombine() for BlueFlame pages
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: check block device size on mount ext4: Fix off-by-one-error in ext4_valid_extent_idx() ext4: Fix big-endian problem in __ext4_check_blockref()
-
由 Masami Hiramatsu 提交于
Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Kill MN10300's own profiling Kconfig as this is superfluous given that the profiling options have moved to init/Kconfig and arch/Kconfig. Not only is this now superfluous, but the dependencies are not correct. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
asm-frv/pgtable.h could just #include <asm-generic/pgtable.h> in NOMMU mode rather than #defining macros for lazy MMU and CPU stuff. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
When request_key() is called, without there being any standard process keyrings on which to fall back if a destination keyring is not specified, an oops is liable to occur when construct_alloc_key() calls down_write() on dest_keyring's semaphore. Due to function inlining this may be seen as an oops in down_write() as called from request_key_and_link(). This situation crops up during boot, where request_key() is called from within the kernel (such as in CIFS mounts) where nobody is actually logged in, and so PAM has not had a chance to create a session keyring and user keyrings to act as the fallback. To fix this, make construct_alloc_key() not attempt to cache a key if there is no fallback key if no destination keyring is given specifically. Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stoyan Gaydarov 提交于
Signed-off-by: NStoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_debug remove execute permission x86: smarten /proc/interrupts output for new counters x86: DMI match for the Dell DXP061 as it needs BIOS reboot x86: make 64 bit to use default_inquire_remote_apic x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes x86, intel-iommu: fix X2APIC && !ACPI build failure
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: consolidate documents blktrace: pass the right pointer to kfree() tracing/syscalls: use a dedicated file header tracing: append a comma to INIT_FTRACE_GRAPH
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: do not count frozen tasks toward load sched: refresh MAINTAINERS entry sched: Print sched_group::__cpu_power in sched_domain_debug cpuacct: add per-cgroup utime/stime statistics posixtimers, sched: Fix posix clock monotonicity sched_rt: don't allocate cpumask in fastpath cpuacct: make cpuacct hierarchy walk in cpuacct_charge() safe when rcupreempt is used -v2
-
由 Linus Torvalds 提交于
Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: fix wrong format string iter for printk futex: comment requeue key reference semantics * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: fix cpumask memory leak on offstack cpumask kernels * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF) posix-timers: fix RLIMIT_CPU && fork() timers: add missing kernel-doc
-
由 Thomas Gleixner 提交于
Convert the last remaining users to no_irq_chip. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 4月, 2009 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm kcopyd: fix callback race dm kcopyd: prepare for callback race fix dm: implement basic barrier support dm: remove dm_request loop dm: rework queueing and suspension dm: simplify dm_request loop dm: split DMF_BLOCK_IO flag into two dm: rearrange dm_wq_work dm: remove limited barrier support dm: add integrity support
-
由 Herbert Xu 提交于
Since the whole point of try_then_request_module is to retry the operation after a module has been loaded, we must wait for the module to fully load. Otherwise all sort of things start breaking, e.g., you won't be able to read your encrypted disks on the first attempt. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com> Tested-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nathan Lynch 提交于
Freezing tasks via the cgroup freezer causes the load average to climb because the freezer's current implementation puts frozen tasks in uninterruptible sleep (D state). Some applications which perform job-scheduling functions consult the load average when making decisions. If a cgroup is frozen, the load average does not provide a useful measure of the system's utilization to such applications. This is especially inconvenient if the job scheduler employs the cgroup freezer as a mechanism for preempting low priority jobs. Contrast this with using SIGSTOP for the same purpose: the stopped tasks do not count toward system load. Change task_contributes_to_load() to return false if the task is frozen. This results in /proc/loadavg behavior that better meets users' expectations. Signed-off-by: NNathan Lynch <ntl@pobox.com> Acked-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: NNigel Cunningham <nigel@tuxonice.net> Tested-by: NNigel Cunningham <nigel@tuxonice.net> Cc: <stable@kernel.org> Cc: containers@lists.linux-foundation.org Cc: linux-pm@lists.linux-foundation.org Cc: Matt Helsley <matthltc@us.ibm.com> LKML-Reference: <20090408194512.47a99b95@manatee.lan> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to the new trace/ directory. I didnt find any references to those documents in both source files and documents, so no extra work needs to be done. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NPekka Paalanen <pq@iki.fi> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
It seems by mistake these files got execute permissions so removing it. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> LKML-Reference: <1239211186.9037.2.camel@ht.satnam> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Impact: fix kfree crash with non-standard act_mask string If passing a string with leading white spaces to strstrip(), the returned ptr != the original ptr. This bug was introduced by me. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <49DD694C.8020902@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: NTony Luck <tony.luck@intel.com> Tested-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jason Baron <jbaron@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Michael Davidson <md@google.com> LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: work_on_cpu(): rewrite it to create a kernel thread on demand kthread: move sched-realeted initialization from kthreadd context kthread: Don't looking for a task in create_kthread() #2
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/battery-2.6: pda_power: Add optional OTG transceiver and voltage regulator support pcf50633_charger: Remove unused mbc_set_status function pcf50633_charger: Enable periodic charging restart
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: cap_prctl: don't set error to 0 at 'no_change'
-