Enable line-out detection for IDT/STAC codecs only when speaker pins
exist.  In some cases, the speaker itself is identified as line-out,
and this confuses the situation.  Only the extra line-outs should do
auto-muting.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous auto-mic patch for STAC/IDT codecs causes the Oops on
machines without digital mic pins.  This patch fixes the problem.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The new HP laptops have PCI SSID 103c:701x and requires model=hp-dv5.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the line-out jack is plugged/unplugged, the driver needs to check
the headphone plug, not only the line-out jack itself.  Otherwise the
headphone or the speaker may be wrongly muted/unmuted.

As a result, both STAC_HP_EVENT and STAC_LO_EVENT need to call the
same function, stac92xx_hp_detect().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit fefd67f3
    ALSA: hda - Add line-out jack detection on IDT/STAC codecs
enabled wrong pins for jack detections.  Fixed to the correct ones.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 24918b61 statically changes
the model from dell-bios to dell-3stack to solve the sound decreasing
regression (http://lkml.org/lkml/2008/9/12/203), however it leads to another
problem that the 2nd headphone jack doesn't work
(https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3987). So I think
the commit 249**2dc is just a workaround. I would like to give a true solution
here.

The datasheet for STAC9228 says, GPIO2 is the same pin as VOL DOWN, and
the EAPD pin is GPIO0. This is why the sound decreases if we set EAPD as
GPIO2. This patch changes EAPD to GPIO0 to solve the problem.
Signed-off-by: NChengu Wang <wangchengu@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the automatic mute of speakers via line-out jack plugging on
STAC/IDT codecs.  The feature is enabled when the HP detect is present.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT codecs provide both "Input Source" and "Digital Input Source"
controls to choose the analog input source and the digital input source.
But this is far user-unfriendly.

This patch merges the input source selections into one "Input Source"
control.  To have separate digital and analog input source controls,
you can pass "separate_dmux = 1 " hint string.

At the same time, this patch gets rid of analog mixer stuff that was
already disabled in previous patches.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 6479c631
    ALSA: hda - Create Capture controls dynamically
introduced typos of "Capture".  Fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The analog mix is disabled now as default (unless "analog_mixer" hint
is given), so it shoudn't appear in the digital input source as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing initialization of DMUX connection (to analog input)
for auto-mic mode with STAC/IDT codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We don't need any more static connection to the port F (which is often
used for docking stations) since its connection is done dynamically via
DAC assignment now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Support the automatic mic-switching with some devices with IDT/STAC
codecs.  The condition is that the device has only two inputs, one
for an external mic and one for an internal mic.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since only one event can be associated to a (pin) widget, it's safer
to avoid the multiple mapping.  This patch fixes the behavior of the
STAC/IDT codec driver.

Now stac_get_event() doesn't take the type argument but simply returns
the first hit element.  Then enable_pin_detect() checks the validity
of the type, and returns non-zero only if a valid entry.  The caller
can call stac_issue_unsol_event() after checking the return value.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The analog mixer unit on IDT 92HD71Bxx codecs is almost useless
since we use only the direct connections from DAC to pin.

Remove the controls to avoid unneeded confusion as default now.
This can be still back via "analog_mixer = 1" hint.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of static snd_kcontrol_new arrays, create "Capture Volume"
and "Capture Switch" controls dynamically based on the mixer attr
values (made via HDA_COMPOSE_AMP_VAL()).
This reduces the code size and gives more flexibility to change
the number of controls later.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current driver creates always the digital input source mixer
elements for IDT 92HD71x codecs no matter whether digital mics are
present.  This patch adds the proper check to avoid the creation of
these controls if unnecessary.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The sentense "Unknown model for xxx, ..." makes people too nervous
and drives them to a direction to a wrong "fix" by giving any
mismatching model option.

Let's rephrase the messages to be more nice and easy (at least that
won't make people suspect conspiracies).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a quirk entry for Dell Studio 1555.

Reference: Novell bnc#525244
	https://bugzilla.novell.com/show_bug.cgi?id=525244Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a helper macro to retrieve the widget type from wiget cap bits.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds a check to snd_hda_get_connections() routine for
presence of AC_WCAP_CONN_LIST. Also, make sure that negative error
codes from noted route are handled on all places as errors.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use snprint() for creating the jack name string instead of sprintf()
in patch_sigmatel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add some tricks to reduce the click noise at powering down to D3
in the power saving mode on STAC/IDT codecs.
The key seems to be to reset PINs before the power-down, and some
delay before entering D3.  The needed delay is significantly long,
but I don't know why.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent rewrite of the codec parser for STAC9872 caused a regression
for some Sony VAIO models that don't give proper pin default configs
by BIOS.  Even using model=vaio doesn't work because the pin definitions
are set after the pin overrides.

This patch fixes the pin definitions in patch_stac9872() to be put
in the right place before the pin overrides.  Also the patch adds the
new quirk entry for VAIO F/S to have the correct pin default configs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

Gateway T6834c laptops need EAPD always on while the default behavior
for the STAC9205 reference board is to turn it off upon every HP plug.
By using the special "eapd" model, which is first introduced for Gateway
T1616 laptops for this same reason, this peculiarity can be properly
handled.
Signed-off-by: NHao Song <baritono.tux@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make the jack-plug notification via input layer selectable via Kconfig.
This is often unnecessary, and the similr function will be provided
using the ALSA control API in near future anyway.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the comparison of unsigned int that causes a compile warning below
by changing to the right signed type:
  patch_sigmatel.c: In function ‘stac92xx_vref_set’:
  patch_sigmatel.c:658: warning: comparison of unsigned expression < 0 is always false
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A quirk is required for 8086:284b (rev 03) [Subsystem: 161f:2073].
The following has been tested with Alsa 1.0.20 (git master).

Background details can be found at
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4561
http://forum.ubuntu-gr.org/viewtopic.php?f=38&t=5290Tested-by: NTheodora Iliopoulou <th30dr@gmail.com>
Signed-off-by: NSimos Xenitellis <simos@gnome.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reset of a BUS controller during operations is somehow risky and
shouldn't be done inevitably for devices that have apparently no such
codec-communication problems.

This patch adds the check of the hardware and limits the bus-reset
capability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch changes Line In as Out Switch and Mic In as Out Switch to
enums for consistency, and causes all mic and line in ports to be probed
and controls to be added appropriately.
Signed-off-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 86d190e7 reverted the bit
flip of LED GPIO for HP DX and DV4-1222nr.  Fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Remove unneeded semicolons
- Introduce spec->gpio_led to specify the GPIO bit for LED control
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent fix for the headphone volume control on IDT/STAC codecs
resulted in the removal of invalid "Side" volume eventually.  But,
if the front panel doesn't exist, this setup could be regarded as a
sort of regression, as reported in kernel bug #13250.

Now as a workaround, a new model 5stack-no-fp is added so that the user
without the front panel can choose this one explicitly.

Reference: bko#13250
	http://bugzilla.kernel.org/show_bug.cgi?id=13250Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The digital beep tone is calculated in two different ways depending
on the codec chip.  The standard one is using a divider, and another
one is a linear tone for IDT/STAC codecs.  Currently, only the
latter type is used for all codecs, which resulted in a wrong tone
pitch.

This patch adds the calculation of the standard HD-audio type.
Also clean-up the fields in hda_beep struct.

Reference: bko#13162
	http://bugzilla.kernel.org/show_bug.cgi?id=13162Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds a mixer control for the STAC92XX boards to control the
DC bias of mic ports, allowing recording from both powered and
non-powered sources.  It replaces the "Mic Output Switch" with "Mic Jack
Mode" to switch between Mic, Line In, and Line Out.
Signed-off-by: NNickolas Lloyd <ultrageek.lloyd@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to
the line-in jack, and it confuses the driver as if it's a valid input.
This patch adds the check of OUTPUT bit so that the driver fixes the
invalid pin setup.
Tested-by: NTino Keitel <tino.keitel@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJames Gardiner <renidragsemaj@yahoo.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the headphone can have no unique DAC, the current code doesn't
check the HP-detection although it should.  Put the hp-detection check
before the DAC check to fix this bug.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't call snd_jack_report at release of sigmatel and conexnat codecs
which results in Oops at unloading the module.

The Oops is triggered by the power-up sequence during the free due to
the pincfg restoration.  Since the power-up sequence is involved with
the unsol handling, the jack reporting may be issued during that.
The Oops occurs with this jack reporting because the jack instances
have been already released but the codec doesn't do the proper
book-keeping.

This patch adds the book-keeping of jack instances to avoid the access
to bogus pointers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>