Add debugfs support for Valleyview and Cherryview considering that
we have PSR per pipe and  we don't have any kind of
performance counter as we have on other platforms that support PSR.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch introduces exit/activate functions for PSR
on VLV+. Since on VLV+ HW cannot track frame updates and force PSR
exit let's use fully SW tracking available.

v2: Rebase over intel_psr.c;
    Remove Single Frame update transitioning from state 3 to 5 directly;
    Fake a software invalidation for sprites and cursor so we don't miss
    any screen update;

v3: As pointed out by Durgadoss msecs_to_jiffies used on wait_for only uses int,
    so let's use 1 instead. Althought the 1/4 of this is needed for the
    transition let's use 1 for simplicity;
    Also fix comments as suggested by Durgadoss

Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The biggest difference from HSW/BDW PSR here is that VLV enable_source
function enables PSR but let it in Inactive state. So it might be called
on early stage along with setup and enable_sink ones.

v2: Rebase over intel_psr.c;
    Remove docs from static functions;
    Merge vlv_psr_active_on_pipe;
    Timeout for psr transition is 250us;
    Remove SRC_TRASMITTER_STATE;

v3: Rebase after is_psr_enabled function got removed;
    Get SRC_TRANSMITTER_STATE back to be on the safe side since
    default for panels is to require link training on exit when
    main link off;
    As pointed out by Durgadoss msecs_to_jiffies used on wait_for only uses int,
    so let's use 1 instead. Althought the 1/4 of this is needed for the
    transition let's use 1 for simplicity;

Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Baytrail (Valleyview) and Braswell (Cherryview) uses a complete different
implementation of PSR that we currently have supported for
Haswell and Broadwell. So let's start by adding registers definitions.

I usually don't like commit that adds just registers without using,
but after I put all in one commit I realized that no one would want
to take the AR to review it so I decided to split in order to make
reviewer's life easier. Only last commit in this series will actually
enable the PSR on intel enable panel path.

But as it happens currently with HSW/BDW the plan is to let it
disabled by default (protected by kernel parameter)
while we are able to fully validate it.

v2: Remove a unused bit definition that isn't used on vlv and
    reserved on chv as pointed out by Durgadoss.

Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This function was in use to check if PSR feature got enabled.
However on HSW and BDW we currently force psr exit by disabling
EDP_PSR_ENABLE bit at EDP_PSR_CTL(dev). So this function was actually
returning the active/inactive state that is different from the enable/disable
meaning and had the risk of false negative.

But anyway this check with DRRS was dangerous, since DRRS could try to get enabled
before PSR gets there. So let's just remove it for now.
A proper synchronization mechanism must be implemented later probably
using pipe config.

Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Single frame update is a feature available on BDW for PSR that allows
Source to send Sink only one frame and get it updated. Usually useful
when page flipping. However with our frontbuffer tracking where we force
psr exit on flips we don't need this feature.

Also after it got added here many workaround was added to documentation
to mask some bits when using single frame update. So the safest thing
is to just stop using it.

v2: Rebase after removing skip aux one and fixing typo on commit message.
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

OEMs can specify if full_link might be always enabled, i.e. only_standby
over VBT.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's use VBT + 1 now we parse it.

v2: fix subject

v3: rebase over intel_psr and without counting on previous fix

Cc: Arthur Runyan <arthur.j.runyan@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

PSR (aka SRD) block is defined at VBT and currently being used.
Mainly/At-least to configure the amount of idle_frames require to get
back to PSR Entry.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because the plane registers are different in Skylake we need to adapt
the MMIO code as well.

v2: Don't introduce yet another vfunc when the direction is do
consolidate the plane updates to use the same code path (Daniel)

v3:
  - Use enum pipe instead of int (Ville)
  - Also update PLANE_STRIDE when the tiling has changed (Ville)
  - Put intel_mark_page_flip_active() in the shared code (Damien)

v4:
  - Remove unused variable

v5:
  - Fix whitespace Vs tabs (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Put the DPLL0 state readout in skylake_get_ddi_pll(), closer to
where the PLL assignement read out is done rather than the frequency
readout function. (Daniel)

v3: Remove stray new line (Damien)
    Add Paulo's r-b tag for v1

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-HSW we have two encoders per digital port: one HDMI, one DP.
However they are the same physical port in hardware and we can't enable
both at the same time. Reject the modeset if the user attempts this.

So far we've been saved by the fact that we never see both HDMI and DP
connectors as connected. But if the user decides to force a mode anyway,
all kinds of funny stuff might happen.

Unfortunately we don't seem to have any way to inform userspace that
such configurations are invalid except by returning an error from
setcrtc. possible_clones only covers real cloning situations, and
looking at the connector names doesn't work either since we don't
always register both connectors for the same port. I suppose the
only way to fix that would be to expose only a single encoder per
digital port like we do on HSW+ but that would be a fairly large
undertaking for little gain.

kms_setmode hits this since it forces modes on non-connected VGA and
HDMI connectors. Previosuly it just resulted in weirdness such as
failed link training. With this patch it will now get an error back
from the kernel and will die with an assert since it thinks that the
configuration should be fine.

v2: Deal with INTEL_OUTPUT_UNKNOWN (Paulo)

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, igt/gem_reset_stats can trigger the recently added WARN on
left-over PM_IIR bits in gen6_enable_rps_interrupts(). There are two
reasons for this:
1. we call intel_enable_gt_powersave() without a preceeding
   intel_disable_gt_powersave()
2. gen6_disable_rps_interrupts() doesn't mask interrupts in PM_IMR

1. means RPS interrupts will remain enabled and can be serviced during
the HW initialization after a GPU reset. 2. means even if we called
gen6_disable_rps_interrupts() any new RPS interrupt during RPS
initialization would still propagate to PM_IIR too early (though
wouldn't be serviced).

This patch solves the 2. issue by also masking interrupts in PM_IMR, the
following patch fixes 1. getting rid of the WARN. This also makes
intel_enable_gt_powersave() and intel_disable_gt_powersave() more
symmetric.

Since gen6_disable_rps_interrupts() is called during driver loading with
i915 interrupts disabled add a new version of gen6_disable_pm_irq() that
doesn't WARN for this.

Also while at it, get the irq_lock around the whole PM_IMR/IER/IIR
programming sequence and make sure that any queued PM_IIR bit is also
cleared.

The WARN was caught by PRTS after I sent my previous RPS sanitizing
patchset and I could easily reproduce it on HSW. To actually fix it we
also need the next patch.
Reported-by: NHe, Shuang <shuang.he@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't really synchronously turn them off from debugfs. We try to
avoid hitting them too badly by waiting one vblank, but apparently the
irq handler can still race through that gap.

Since this isn't really all that important for testcases, only for
debugging CRC issues let's tune it down to a debug message.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82602
Cc: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Dynamic context pinning for LRCs introduced a leak in legacy mode.
Reinstate context unreference in i915_gem_free_request for legacy contexts.

Leak reported by i-g-t/drv_module_reload fixed by this patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86507Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Reviewed-by: John Harrison<John.C.Harrison@Intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Updates in forcewake range for Render/Media/Common
power wells for Gen9.
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Signed-off-by: NZhe Wang <zhe1.wang@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Before testing if the panel VDD is enabled on eDP cancel any pending
disable worker. This makes sure the worker will be triggered with a
delay from the last time edp_panel_vdd_schedule_off() is called, not
the first time. This avoids unnecessary overhead.

https://bugs.freedesktop.org/show_bug.cgi?id=86201

v2: use cancel_delayed_work() instead of cancel_delayed_work_sync()
as the pps_mutexes will provide the required serialization with
edp_panel_vdd_work() while the sync variant may deadlock. Suggested
by Ville Syrjälä <ville.syrjala@linux.intel.com>.
Made commit message a bit clearer.
Signed-off-by: NEgbert Eich <eich@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The crc code doesn't handle anything really that could drop the
register state (by design so that we have less complexity). Which
means userspace may only start crc capture once the pipe is fully set
up.

With an i-g-t patch this will be the case, but there's still the
problem that this results in obscure unclaimed register write
failures. Which is a pain to debug.

So instead make sure we don't have the basic unclaimed register write
failure by grabbing runtime pm references. And reject completely
invalid requests with -EIO. This is still racy of course, but for a
test library we don't really care - if userspace shuts down the pipe
right afterwards the entire setup will be lost anyway.

v2: Put instead of get, spotted by Damien. Also explain the runtime pm
dance.

v3: There's really no need for rpm get/put since power_is_enabled only
checks software state (Damien).

References: https://bugs.freedesktop.org/show_bug.cgi?id=86092
Cc: Damien Lespiau <damien.lespiau@intel.com> (v2)
Tested-by: Nlu hua <huax.lu@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The GPU reset also resets the display on gen3/4. The g33 docs say we
should disable all planes before flipping the reset switch. Just
disable all the crtcs instead. That seems a nicer thing to do anyway.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On gen4 and earlier the GPU reset also resets the display, so we should
protect against concurrent modeset operations. Grab all the modeset locks
around the entire GPU reset dance, remebering first ti dislogde any
pending page flip to make sure we don't deadlock. Any pageflip coming
in between these two steps should fail anyway due to reset_in_progress,
so this should be safe.

This fixes a lot of failed asserts in the modeset code when there's a
modeset racing with the reset. Naturally the asserts aren't happy when
the expected state has disappeared.

v2: Drop UMS checks, complete pending flips after the reset (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

g33 seems to sit somewhere between the 915/945/965 style and the
g4x style. The bits look like g4x, but we still need to do a full
reset including display.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

915/945 have the same reset registers as 965, so share the code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-ctg GPU reset also resets the display hardware. Force a mode
restore after the GPU reset, and also re-init clock gating.

v2: Use intel_modeset_init_hw() instead of intel_init_clock_gating()
    in case more relevant stuff gets added there at some point
    Restore interrupts after the reset as well
Tested-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-ctg the reset bit directly controls the reset signal. We must
assert it for >=20usec and then deassert it. Bit 1 is a RO status bit
which should also go down when the reset is no longer asserted.
Tested-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's quite a few bug reports with error states where the error
reasons makes just about no sense at all. Like dying on tlbs for a
display plane that's not even there. Also users don't really report a
lot of bad side effects generally, just the error states.

Furthermore we don't even enable these interrupts any more on gen5+
(though the handling code is still there). So this mostly concerns old
platforms.

Given all that lets make our lives a bit easier and stop capturing
error states, in the hopes that we can just ignore them. In case
that's not true and the gpu indeed dies the hangcheck should
eventually kick in. And I've left some debug log in to make this case
noticeble. Referenced bug is just an example.

v2: Fix missing \n Jani spotted.

References: https://bugs.freedesktop.org/show_bug.cgi?id=82095
References: https://bugs.freedesktop.org/show_bug.cgi?id=85944Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The problem here is that SNA pins batchbuffers to etch out a bit more
performance. Iirc it started out as a w/a for i830M (which we've
implemented in the kernel since a long time already). The problem is
that the pin ioctl wasn't added in

commit d23db88c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri May 23 08:48:08 2014 +0200

    drm/i915: Prevent negative relocation deltas from wrapping

Fix this by simply disallowing pinning from userspace so that the
kernel is in full control of batch placement again. Especially since
distros are moving towards running X as non-root, so most users won't
even be able to see any benefits.

UMS support is dead now, but we need this minimal patch for
backporting. Follow-up patch will remove the pin ioctl code
completely.

Note to backporters: You must have both

commit b45305fc
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Dec 17 16:21:27 2012 +0100

    drm/i915: Implement workaround for broken CS tlb on i830/845

which laned in 3.8 and

commit c4d69da1
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Sep 8 14:25:41 2014 +0100

    drm/i915: Evict CS TLBs between batches

which is also marked cc: stable. Otherwise this could introduce a
regression by disabling the userspace w/a without the kernel w/a being
fully functional on i830/45.

References: https://bugs.freedesktop.org/show_bug.cgi?id=76554#c116
Cc: stable@vger.kernel.org # requires c4d69da1 and v3.8
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

In all likelihood we will do a few hundred errnoneous register
operations if we do a single invalid register access whilst the device
is suspended. As each instance causes a WARN, this floods the system
logs and can make the system unresponsive.

The warning was first introduced in
commit b2ec142c
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Fri Feb 21 13:52:25 2014 -0300

    drm/i915: call assert_device_not_suspended at gen6_force_wake_work

and despite the claims the WARN is still encountered in the wild today.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

CHV infoframes were not being enabled.
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When doing a nop modeset we currently leave crtc->new_config point at
the already freed temporary pipe_config. That will anger the sanity
checks in intel_modeset_update_state() when the nop modeset gets
followed by a GPU reset on gen3/4 where the display block gets fully
reinitialized during the reset.

So leave crtc->new_config alone until we know a modeset is actually
required.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The DRM connector's encoder pointer is managed internally by the DRM
core and set to NULL when the DRM connector is disconnected from the
CRTC it was attached to. This results in a NULL pointer dereference in
the HDMI connector functions when trying to call the associated slave
encoder's operations.

Fix this by retrieving the slave encoder pointer from the R-Car
connector structure instead of the DRM connector structure.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel into drm-next

drm-intel-next-2014-11-21:
- infoframe tracking (for fastboot) from Jesse
- start of the dri1/ums support removal
- vlv forcewake timeout fixes (Imre)
- bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom
  O'Rourke)
- on-demand pinning for execlist contexts
- vlv/chv backlight improvements (Ville)
- gen8+ render ctx w/a work from various people
- skl edp programming (Satheeshakrishna et al.)
- psr docbook (Rodrigo)
- piles of little fixes and improvements all over, as usual

* tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel: (117 commits)
  drm/i915: Don't pin LRC in GGTT when dumping in debugfs
  drm/i915: Update DRIVER_DATE to 20141121
  drm/i915/g4x: fix g4x infoframe readout
  drm/i915: Only call mod_timer() if not already pending
  drm/i915: Don't rely upon encoder->type for infoframe hw state readout
  drm/i915: remove the IRQs enabled WARN from intel_disable_gt_powersave
  drm/i915: Use ggtt error obj capture helper for gen8 semaphores
  drm/i915: vlv: increase timeout when setting idle GPU freq
  drm/i915: vlv: fix cdclk setting during modeset while suspended
  drm/i915: Dump hdmi pipe_config state
  drm/i915: Gen9 shadowed registers
  drm/i915/skl: Gen9 multi-engine forcewake
  drm/i915: Read power well status before other registers for drpc info
  drm/i915: Pin tiled objects for L-shaped configs
  drm/i915: Update ring freq for full gpu freq range
  drm/i915: change initial rps frequency for gen8
  drm/i915: Keep min freq above floor on HSW/BDW
  drm/i915: Use efficient frequency for HSW/BDW
  drm/i915: Can i915_gem_init_ioctl
  drm/i915: Sanitize ->lastclose
  ...

LRC object does not need to be mapped into the GGTT when dumping. A side-effect
of this patch is that a compiler warning goes away (not checking return value
of i915_gem_obj_ggtt_pin).

v2: Broke out individual context dumping into a new function as the indentation
was getting a bit crazy.  Added notification of contexts with no gem object for
debugging purposes.  Removed unnecessary pin_pages and unpin_pages, replaced
with explicit get_pages for the context object as there may be no backing store
allocated at this time (Comment for get_pages says "Ensure that the associated
pages are gathered from the backing storage and pinned into our object").
Improved error checking - get_pages and get_page are checked for failure.
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
[danvet: Align paramter continuation lines properly. Also add some
braces to the nested loops again for readability.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

- Tegra K1 voltage support, and coherency improvements
- GM204 support (modesetting, still waiting on NVIDIA for signed fw to
proceed further), and a lot of bios/i2c/devinit adjustments needed to
support it
- GT21x memory reclocking work
- Various other bits and pieces, most of which are prep-work for a
couple of bigger projects I didn't get finished in time

* 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (73 commits)
  drm/nv50/kms: drop requirement that framebuffer bos be contig up-front
  drm/nv50/kms: directly use cursor image from userspace buffer
  drm/nouveau/kms: when pinning display-related buffers, force contig vram
  drm/nouveau: teach nouveau_bo_pin() how to force a contig vram allocation
  drm/nouveau/volt: add support for GK20A
  drm/nouveau/platform: add GPU speedo information to nouveau platform
  drm/nouveau/volt: allow non-bios voltage scaling
  drm/gf100-/gr: return non-fatal error code when fw not present
  drm/nouveau/devinit: bump priv ring timeouts before executing scripts
  drm/nouveau/bios: translate ramcfg strap through M0203
  drm/nouveau/fb: make use of M0203 routines for ram type determination
  drm/nouveau/bios: add parsing of BIT M(v2) +0x03 table
  drm/nouveau/core: allow vbios parsing without knowing chipset type
  drm/nouveau/lib: add null backend
  drm/nouveau/device: store revision
  drm/nouveau/core: add some forgotten subdevs to disable mask
  drm/gk20a/clk: fix max VCO value
  drm/nouveau: we need pin_refcnt for nouveau_bo_placement_set()
  drm/nv50-/kms: add some evo tracing ability for debugging
  drm/nv50/kms: use sclass() instead of trial-and-error
  ...

We'll move them at pin() time if necessary.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Preparation for transition to planes, which use framebuffers for the
cursor image.  We've always done copies from the userspace buffer up
until now for legacy reasons, there's no good reason to do so on the
chipsets this code covers.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We have the ability to move buffers around in the kernel if necessary,
and should probably use it rather than failing if userspace passes us
a non-contig buffer for a plane.

The NOUVEAU_GEM_TILE_NONCONTIG flag from userspace will become a mere
initial placement hint once all the relevant paths have been updated.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The voltage value are calculated by the hardware characterized
result.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

For GK20A we need the GPU speedo value to calculate voltage levels.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Move the vbios parsing out of init() and call it conditionally if the
platform has a vbios. Non-vbios platforms can use the ctor() to init the
data structures.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>