Have a facility to account for potentially hot-pluggable CPUs. ACPI doesnt
give a determinstic method to find hot-pluggable CPUs. Hence we use 2 methods
to assist.

- BIOS can mark potentially hot-pluggable CPUs as disabled in the MADT tables.
- User can specify the number of hot-pluggable CPUs via parameter
  additional_cpus=X

The option is enabled only if ACPI_CONFIG_HOTPLUG_CPU=y which enables the
physical hotplug option. Without which user can still use logical onlining
and offlining of CPUs by enabling CONFIG_HOTPLUG_CPU=y

Adds more bits to cpu_possible_map for potentially hot-pluggable cpus.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Do not set cpu_possible_map for NR_CPUS when ACPI_CONFIG_HOTPLUG_CPU is set.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix x86 oprofile regression introduced by:
  commit c34d1b4d
  [PATCH] mm: kill check_user_page_readable

That commit reorganized tests for the userspace stack walking moving all
those tests into dump_backtrace(), however, dump_backtrace() was used for
both userspace and kernel stalk walking.  The result is typically no
recorded callgraph information for kernel samples.

Revive the original function as dump_kernel_backtrace() and rename the
other to dump_user_backtrace() to avoid future confusion.
Signed-off-by: NGerald Britton <gbritton@alum.mit.edu>
Apology-from: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Probe and remove methods are now defined at bus level. No more need to
redefine them at driver level in i2c-isa.

This lets us get rid of these annoying messages:
Driver 'it87-isa' needs updating - please use bus_type methods

Thanks to Nicolas Mailhot for reporting the problem and testing the fix.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix an oops on it87 module removal when no supported hardware was
found.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Document the reset module parameter which was recently added to the
w83627hf driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the real-time status registers of the Winbond W83782D, W83783S and
W83627HF chips, instead of the interrupt status registers. Interrupts
cannot be trusted at least for voltage inputs, as they are two-times
triggers (as opposed to comparator mode, which we want.) The w83627hf
driver was fixed in a similar way some times ago.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The VT8231 low temperature limits are actually hysteresis temperatures
to the high limits.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Roger Lucas <roger@planbit.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The following patch looks good to me. It adds an unusual_devs entry as
well as fixing an ordering bug. Please apply.

From: Bohdan Linda <bohdan.linda@gmail.com>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Another unusual_devs.h entry (as652).
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A new unusual_devs.h entry (as651).
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Here is a new entry for unusual_devs.h (as630).
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as631) for unusual_devs.h fixes bugzilla entry 5913.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The switchover to "platform_driver" from "device_driver" missed
one rather essential usage, which broke the sl811_cs driver ...
this resolves the omission.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The patch adds the USB ID (0413:2101) for the Leadtek GPS-Mouse 9531 to
the driver pl2303.
Signed-off-by: NChristian Lindner <christian.lindner@gmx.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMichael Hund <mhund@ld-didactic.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMichael Hund <mhund@ld-didactic.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Disable some dubious "early" USB handoff code that allegedly works around bugs
on some systems (we don't know which ones) but rudely breaks some others.

Also make the kernel warnings reporting BIOS handoff problems be more useful,
reporting the register whose value displays the trouble.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

parisc defines ARCH_WANT_STAT64, so we want to use fstatat64. It does not
appear that it needs to be ENTRY_COMP, because struct stat64 is the same
on both 32-bit and 64-bit (unlike on other platforms which did define a
compat_sys_fstatat64.)
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert the following changeset:

bc8dfcb9

Recursive SKB frag lists are really possible and disallowing
them breaks things.

Noticed by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Problem discovered and initial patch by Olaf Kirch:

	there's a problem with IPsec that has been bugging some of our users
	for the last couple of kernel revs. Every now and then, IPsec will
	freeze the machine completely. This is with openswan user land,
	and with kernels up to and including 2.6.16-rc2.

	I managed to debug this a little, and what happens is that we end
	up looping in xfrm_lookup, and never get out. With a bit of debug
	printks added, I can this happening:

		ip_route_output_flow calls xfrm_lookup

		xfrm_find_bundle returns NULL (apparently we're in the
			middle of negotiating a new SA or something)

		We therefore call xfrm_tmpl_resolve. This returns EAGAIN
			We go to sleep, waiting for a policy update.
			Then we loop back to the top

		Apparently, the dst_orig that was passed into xfrm_lookup
			has been dropped from the routing table (obsolete=2)
			This leads to the endless loop, because we now create
			a new bundle, check the new bundle and find it's stale
			(stale_bundle -> xfrm_bundle_ok -> dst_check() return 0)

	People have been testing with the patch below, which seems to fix the
	problem partially. They still see connection hangs however (things
	only clear up when they start a new ping or new ssh). So the patch
	is obvsiouly not sufficient, and something else seems to go wrong.

	I'm grateful for any hints you may have...

I suggest that we simply bail out always.  If the dst decides to die
on us later on, the packet will be dropped anyway.  So there is no
great urgency to retry here.  Once we have the proper resolution
queueing, we can then do the retry again.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NOlaf Kirch <okir@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNicolas DICHTEL <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/appletalk/cops.c: In function `cops_load':
drivers/net/appletalk/cops.c:539: warning: assignment discards qualifiers from pointer target type
drivers/net/appletalk/cops.c:547: warning: assignment discards qualifiers from pointer target type
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- panic() doesn't return.

- Don't forget to unlock on genl_register_family() error path

- genl_rcv_msg() is called via pointer so there's no point in declaring it
  `inline'.

Notes:

genl_ctrl_event() ignores the genlmsg_multicast() return value.

lots of things ignore the genl_ctrl_event() return value.
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Horms patch was the best of the three fixes. Dave, already applied
Harald's version, so this patch converts that to the better one.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new x_tables related Kconfig options appear at the wrong menu level
without this patch.
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing license tag.
I've assumed this is GPL.  (It could also use a MODULE_AUTHOR)
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

isic can trigger these msgs to be spewed at a very high rate.
There's already a sysctl to turn them off. Given these messages
aren't useful for most people, this patch disables them by
default.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This seems to be trivial to trigger.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Joe Perches <joe@perches.com>

Based upon a patch by Dave Jones.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I get a machine check exception, triple fault, or NMI watchdog lockup
when DRI gets enabled on this card.

(And Mauro Tassinari <mtassinari@cmanet.it> reports hung kernels too in
http://lkml.org/lkml/2006/1/26/97)

[ Adrian Bunk also states that this is the only RV350 entry for an RV370
  in our lists, which implies that it's just buggy ]

Cc: Adrian Bunk <bunk@stusta.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Mauro Tassinari <mtassinari@cmanet.it>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a potential oops if there is an error reported by
posix_acl_from_disk().  This is mostly theoretical due to the use of
magics and checksums in xattrs, but is still possible.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As noted by Jan Dittmer <jdi@l4x.org>
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Before the PCMCIA subsystem was fully integrated into the device and
driver model, the BT3C driver had to workaround this when loading the
firmware. This workaround is broken and makes the driver oops when
loading the firmware. This patch removes this workaround and uses now
the provided device structure from the PCMCIA subsystem.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch fixes the two NULL pointer dereferences found by the sfuzz
tool from Ilja van Sprundel. The first one was a call of getsockname()
for an unbound socket and the second was calling accept() while this
operation isn't implemented for the HCI socket interface.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>