This patch introduces a new, out-of-range value to indicate that
a link endpoint does not have an existing session established
with its peer, eliminating the risk that the previously used
"invalid session number" value (i.e. zero) might eventually be
assigned as a valid session number and cause incorrect link
behavior.

The patch also introduces explicit bit masking when assigning a
new link session number to ensure it does not exceed 16 bits.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch modifies TIPC to only exclude debug-related print buffer
routines when debugging capabilities are not required.  It also
fixes up some related #defines that exceed 80 characters.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ensures that TIPC properly handles incoming messages
that have incorrect or unexpected formats.  Most significantly,
it now ensures that each sl_buff has at least as much data as
the message header indicates it should, and that the entire
message header is stored contiguously; this prevents TIPC from
accidentally accessing memory that is not part of the sk_buff.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows TIPC to process incoming messages that are
stored in a fragmented sk_buff, by forcing the linearization
of any such messages it receives.

Note: This is an interim solution to allow TIPC to operate with
Ethernet devices that generate non-linear buffers (such as the
gianfar driver), until such time as the rest of TIPC is enhanced
to handle sk_buffs with multiple data areas.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch eliminates some unused or duplicate message header
symbols, and fixes up the comments and/or location of a few
other symbols.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer
net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer
net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer
net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fix two warnings generated by sparse:

link.c:2386 symbol 'msgcount' shadows an earlier one
node.c:244 symbol 'addr_string' shadows an earlier one
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

if printbuf allocation or tipc_node_attach_link() fails, invalid
references to the link are left in the associated node and bearer
structures.
Fix by allocating printbuf early and moving timer initialization
and the addition of the new link to the b_ptr->links list after
tipc_node_attach_link() succeeded.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch enhances TIPC's stream socket send routine so that
it avoids transmitting data in chunks that require fragmentation
and reassembly, thereby improving performance at both the
sending and receiving ends of the connection.

The "maximum packet size" hint that records MTU info allows
the socket to decide how big a chunk it should send; in the
event that the hint has become stale, fragmentation may still
occur, but the data will be passed correctly and the hint will
be updated in time for the following send.  Note: The 66060 byte
pseudo-MTU used for intra-node connections requires the send
routine to perform an additional check to ensure it does not
exceed TIPC"s limit of 66000 bytes of user data per chunk.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NJon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spring cleaning time...

There seems to be a lot of places in the network code that have
extra bogus semicolons after conditionals.  Most commonly is a
bogus semicolon after: switch() { }
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To clearly state the intent of copying to linear sk_buffs, _offset being a
overly long variant but interesting for the sake of saving some bytes.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allows the compiler to optimize out any code that tries to
send debugging output to the null print buffer (TIPC_NULL), a capability
that was unintentionally broken during the recent print buffer rework.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc spits out this warning:

net/tipc/link.c: In function ‘link_retransmit_failure’:
net/tipc/link.c:1669: warning: cast from pointer to integer of different
size

More than a little bit ugly, storing integers in void*, but at least the
code is correct, unlike some of the more crufty Linux kernel code found
elsewhere.

Rather than having two casts to massage the value into u32, it's easier
just to have a single cast and use "%lu", since it's just a printk.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The recent change to direct inspection of bundle buffer tailroom did not
account for the possiblity of unrequested tailroom added by skb_alloc(),
thereby allowing a bundle to be created that exceeds the current link MTU.
An additional check now ensures that bundling works correctly no matter
if the bundle buffer is smaller, larger, or equal to the link MTU.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now determines tailroom of bundle buffer by directly inspection of buffer.
Previously, buffer was assumed to have a max capacity equal to the link MTU,
but the addition of link MTU negotiation means that the link MTU can increase
after the bundle buffer is allocated.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Incorporates several related fixes:
- switchover now occurs when switching from an active link to a standby link
- failure of a standby link no longer initiates switchover
- links now display correct # of received packtes following reactivation
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This also contains enhancements to simplify comparisons in name table
publication removal algorithm and to simplify name table sanity checking
when shutting down TIPC.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fix prevents node from crashing.
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fix prevents link flopping and name table inconsistency problems arising
when a node is assigned a different <Z.C.N> value than it used previously.
(Changing the <Z.C.N> value causes other nodes to have two link endpoints
sending to the same MAC address using two different destination <Z.C.N> values,
requiring the receiving node to filter out the unwanted messages.)
Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With reference to latest discussions on linux-kernel with respect to
inline here is a patch for tipc to remove all inlines as used in
the .c files. See also chapter 14 in Documentation/CodingStyle.

Before:
   text        data     bss     dec     hex filename
 102990        5292    1752  110034   1add2 tipc.o

Now:
   text        data     bss     dec     hex filename
 101190        5292    1752  108234   1a6ca tipc.o

This is a nice text size reduction which will improve icache usage.
In some cases bigger (> 4 lines) functions where declared inline
and used in many places, they are most probarly no longer inlined by gcc
resulting in the size reduction.
There are several one liners that no longer are declared inline, but gcc
should inline these just fine without the inline hint.

With this patch applied one warning is added about an unused static
function - that was hidded by utilising inline before.
The function in question were kept so this patch is solely a
inline removal patch.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tried to run the new tipc stack through sparse.
Following patch fixes all cases where 0 was used
as replacement of NULL.
Use NULL to document this is a pointer and to silence sparse.

This brough sparse warning count down with 127 to 24 warnings.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NPer Liden <per.liden@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a tipc_ prefix to all externally visible symbols.
Signed-off-by: NPer Liden <per.liden@ericsson.com>

Added macros for min/default/max link priority in tipc_config.h.
Also renamed TIPC_NUM_LINK_PRI to TIPC_MEDIA_LINK_PRI since that
is a more accurate description of what it is used for.
Signed-off-by: NPer Liden <per.liden@ericsson.com>

Updated copyright notice to include the year the file was
actually created. Information about file creation dates
was extracted from the files in the old CVS repository
at tipc.sourceforge.net.
Signed-off-by: NPer Liden <per.liden@nospam.ericsson.com>

The copyright statements from different parts of Ericsson
have been merged into one.
Signed-off-by: NPer Liden <per.liden@nospam.ericsson.com>

The license header in each file now more clearly state that this
code is licensed under a dual BSD/GPL. Before this was only
evident if you looked at the MODULE_LICENSE line in core.c.
Signed-off-by: NPer Liden <per.liden@nospam.ericsson.com>

TIPC (Transparent Inter Process Communication) is a protocol designed for
intra cluster communication. For more information see
http://tipc.sourceforge.netSigned-off-by: NPer Liden <per.liden@nospam.ericsson.com>