- 17 10月, 2007 12 次提交
-
-
由 Martin J. Bligh 提交于
Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176] [akpm@linux-foundation.org: cross-port e6022603] [akpm@linux-foundation.org: Port the omitted 08fb306f] [akpm@linux-foundation.org: Backport the missed 20acaa18] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 vignesh babu 提交于
Replace n & (n - 1) with is_power_of_2(n) Signed-off-by: Nvignesh babu <vignesh.babu@wipro.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
When a new block bitmap is read from disk in read_block_bitmap() there are a few bits that should ALWAYS be set. In particular, the blocks given by ext4_blk_bitmap, ext4_inode_bitmap and ext4_inode_table. Validate the block bitmap against these blocks. [akpm@linux-foundation.org: cleanups] Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NAndreas Dilger <adilger@clusterfs.com> Acked-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
ext[234]_get_group_desc never tests the bh argument, and only sets it if it is passed in; it is perfectly happy with a NULL bh argument. But, many callers send one in and never use it. May as well call with NULL like other callers who don't use the bh. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Using mtab is problematic for various reasons, one of them is that unprivileged mounts won't turn up in there. So we want to get rid of it, and use /proc/mounts instead. But most filesystems are lazy, and are not showing all mount options. Which means, that without mtab, the user won't be able to see some or all of the options. It would be nice if the generic code could remember the mount options, and show them without the need to add extra code to filesystems. But this is not easy, because different filesystems handle mount options given options, and not tough the rest. This is not taken into account by mount(8) either, so /etc/mtab will be broken in this case. This series fixes up ->show_options() in ext[234]. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Philippe De Muyter 提交于
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
alloc_percpu can fail, propagate that error. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Hugh spotted that some code does: percpu_counter_add(&counter, -unsignedlong) which, when the amount argument is of type s32, sort-of works thanks to two's-complement. However when we'd change the type to s64 this breaks on 32bit machines, because the promotion rules zero extend the unsigned number. Provide percpu_counter_sub() to hide the s64 cast. That is: percpu_counter_sub(&counter, foo) is equal to: percpu_counter_add(&counter, -(s64)foo); Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
s/percpu_counter_mod/percpu_counter_add/ Because its a better name, _mod implies modulo. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is now implemented in a way that does not create blocks in sparse regions, which is a silly thing for it to have been doing (isn't it?) ext2 survives fsx and fsstress. jfs is converted as well... ext3 should be easy to do (but not done yet). [akpm@linux-foundation.org: coding-style fixes] Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2007 1 次提交
-
-
由 Eric Sandeen 提交于
ext[234]_check_descriptors sanity checks block group descriptor geometry at mount time, testing whether the block bitmap, inode bitmap, and inode table reside wholly within the blockgroup. However, the inode table test is off by one so that if the last block in the inode table resides on the last block of the block group, the test incorrectly fails. This is because it tests the last block as (start + length) rather than (start + length - 1). This can be seen by trying to mount a filesystem made such as: mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024 which yields: EXT2-fs error (device loop0): ext2_check_descriptors: Inode table for group 0 not in group (block 101)! EXT2-fs: group descriptors corrupted! There is a similar bug in e2fsprogs, patch already sent for that. (I wonder if inside(), outside(), and/or in_range() should someday be used in this and other tests throughout the ext filesystems...) Signed-off-by: NEric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 2 次提交
-
-
由 Paul Mundt 提交于
Slab destructors were no longer supported after Christoph's c59def9f change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoann Padioleau 提交于
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Acked-by: NPierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NGreg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 2 次提交
-
-
由 Satyam Sharma 提交于
Introduce is_owner_or_cap() macro in fs.h, and convert over relevant users to it. This is done because we want to avoid bugs in the future where we check for only effective fsuid of the current task against a file's owning uid, without simultaneously checking for CAP_FOWNER as well, thus violating its semantics. [ XFS uses special macros and structures, and in general looked ... untouchable, so we leave it alone -- but it has been looked over. ] The (current->fsuid != inode->i_uid) check in generic_permission() and exec_permission_lite() is left alone, because those operations are covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone. Signed-off-by: NSatyam Sharma <ssatyam@cse.iitk.ac.in> Cc: Al Viro <viro@ftp.linux.org.uk> Acked-by: NSerge E. Hallyn <serge@hallyn.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
currently the export_operation structure and helpers related to it are in fs.h. fs.h is already far too large and there are very few places needing the export bits, so split them off into a separate header. [akpm@linux-foundation.org: fix cifs build] Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeil Brown <neilb@suse.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2007 2 次提交
-
-
由 Badari Pulavarty 提交于
This is a patch that speeds up statfs. It is very simple - the "overhead" calculation, which takes a huge amount of time for large filesystems, never changes unless the size of the filesystem itself changes. That means we can store it in memory and only recalculate if the filesystem has been resized (almost never). It also fixes a minor problem that we never update the on-disk superblock free blocks/inodes counts until the filesystem is unmounted. While not fatal, we may as well update that on disk when we have the information, and it makes things like debugfs and dumpe2fs report a bit more accurate info. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndreas Dilger <adilger@clusterfs.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Signed-off-by: NJan Kara <jack@suse.cz> Acked-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 7月, 2007 2 次提交
-
-
由 Carsten Otte 提交于
This patch removes xip_file_sendfile, the sendfile implementation for xip without replacement. Those customers that use xip on s390 are not using sendfile() as far as we know, and so far s390 is the only platform this could potentially be used on so far. Having sendfile is not a popular feature for execute in place file systems, however we have a working implementation of splice_read() based on fs/splice.c if anyone asks for it. At this point in time, it does not seem preferable to merge splice_read() for xip because it causes extra maintenence effort due to code duplication and it requires struct page behind the xip memory segment. We'd like to get rid of that in favor of supporting flash based embedded platforms (Monta Vista work) soon. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 29 6月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
gcc correctly says fs/ext2/super.c: In function 'ext2_remount': fs/ext2/super.c:1055: warning: 'err' may be used uninitialized in this function Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 6月, 2007 1 次提交
-
-
由 Carsten Otte 提交于
Yan Zheng pointed out that ext2_remount lacks checking if -o xip should be enabled or not. This patch checks for presence of direct_access on the backing block device and if the blocksize meets the requirements. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Cc: Yan Zheng <yanzheng@21cn.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 5月, 2007 1 次提交
-
-
由 Christoph Lameter 提交于
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 3 次提交
-
-
由 Jan Kara 提交于
Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into ext2-specific i_flags. Hence, when someone sets these flags via a different interface than ioctl, they are stored correctly. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Markus Rechberger 提交于
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079 signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit 10000011110110100100111110111101 .. -2,082,844,739 10000011110110100100111110111101 .. 2,212,122,557 <- this currently gets stored on the disk but when converting it to a 64bit signed long value it loses its sign and becomes positive. Cc: Andreas Dilger <adilger@dilger.ca> Cc: <linux-ext4@vger.kernel.org> Andreas says: This patch is now treating timestamps with the high bit set as negative times (before Jan 1, 1970). This means we lose 1/2 of the possible range of timestamps (lopping off 68 years before unix timestamp overflow - now only 30 years away :-) to handle the extremely rare case of setting timestamps into the distant past. If we are only interested in fixing the underflow case, we could just limit the values to 0 instead of storing negative values. At worst this will skew the timestamp by a few hours for timezones in the far east (files would still show Jan 1, 1970 in "ls -l" output). That said, it seems 32-bit systems (mine at least) allow files to be set into the past (01/01/1907 works fine) so it seems this patch is bringing the x86_64 behaviour into sync with other kernels. On the plus side, we have a patch that is ready to add nanosecond timestamps to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so this extends the maximum date to 2242. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 2 次提交
-
-
由 Christoph Lameter 提交于
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Ensure pages are uptodate after returning from read_cache_page, which allows us to cut out most of the filesystem-internal PageUptodate calls. I didn't have a great look down the call chains, but this appears to fixes 7 possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in block2mtd. All depending on whether the filler is async and/or can return with a !uptodate page. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 2月, 2007 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
Signed-off-by: N"Aneesh Kumar K.V" <aneesh.kumar@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 2 次提交
-
-
由 Josef 'Jeff' Sipek 提交于
This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: NJosef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arjan van de Ven 提交于
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 2 次提交
-
-
由 Hugh Dickins 提交于
Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a kernel built without ACL support, then umask was ignored when creating inodes - though root or user has umask 022, touch creates files as 0666, and mkdir creates directories as 0777. This appears to have worked right until 2.6.11, when a fix to the default mode on symlinks (always 0777) assumed VFS applies umask: which it does, unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in s_flags according to s_mount_opt set according to def_mount_opts. We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test); but other filesystems only set MS_POSIXACL when ACLs are configured. We could fix this at another level; but it seems most robust to avoid setting the s_mount_opt flag in the first place (at the expense of more ifdefs). Likewise don't set the XATTR_USER flag when built without XATTR support. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Sandeen 提交于
This one was pointed out on the MOKB site: http://kernelfun.blogspot.com/2006/11/mokb-09-11-2006-linux-26x-ext2checkpage.html If a directory's i_size is corrupted, ext2_find_entry() will keep processing pages until the i_size is reached, even if there are no more blocks associated with the directory inode. This patch puts in some minimal sanity-checking so that we don't keep checking pages (and issuing errors) if we know there can be no more data to read, based on the block count of the directory inode. This is somewhat similar in approach to the ext3 patch I sent earlier this year. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2006 2 次提交
-
-
由 David Howells 提交于
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Josef "Jeff" Sipek 提交于
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext2 filesystem. Signed-off-by: NJosef "Jeff" Sipek <jsipek@cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 12月, 2006 4 次提交
-
-
由 Andrew Morton 提交于
Port commit a090d913 into ext2: All modifications of ->i_flags in inodes that might be visible to somebody else must be under ->i_mutex. That patch fixes ext2 ioctl() setting S_APPEND. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Gruenbacher 提交于
lock_super() is unnecessary for setting super-block feature flags. Use the provided *_SET_COMPAT_FEATURE() macros as well. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
Update ext2_statfs to return an FSID that is a 64 bit XOR of the 128 bit filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla entry for details: http://bugzilla.kernel.org/show_bug.cgi?id=136 Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-